|
| 1 | Hire charges for closing the window opening with 12 mm thick water proof plywood using country wood reeper of size 50 x 25 mm including making necessary holes in the walls, fixing the reeper and plywood with nails, screws and binding wire and after the counting is over removing of all fitting materials and redoing the damages portion to the original condition etc complete as directed by the departmental officers |
| 2 | Hire charges for providing barricading using jackey as vertical post and M.S Tube of size 60x40x4mm as horizontal ties including labour charges for removing the same after counting is over without damages to the building as directed by the departmental officers. |
| 3 | Hire charges for providing Chain link - 2\\" x 2\\" using 10 Gauge Galvanised Iron Wire safety arrangements over the existing Rectangular tubes arrangements including cost of nails, screws and clamps and removing the same after the counting is over including conveyance and stacking as directed by the departmental officers. |
| 4 | Hire charges for Providing weldmesh using 7.5 X 2.5cm 10 gauge with silver scantling of varies length and size for vertival and horizontal supports and cross supports using C.W reepers of size 2\\"x1\\" including cost of materials and labour charges for fixing in postion with all necessary accessories etc., complete complying with standard specification as directed by the departmental officers. |
| 5 | Hire charges for providing weldmesh Door arrangements by using weldmesh of size 2.50 cm x2.50 cm and outer and inner frame 20x20mm square tube including cost of nails , screws and clamps and removing the same after the counting is over including conveyance and stacking as directed by the departmental officers. |
| 6 | Hire charges for providing Chicken mesh arrangements including cost of binding wire and removing the same after the counting is over including conveyance etc., as directed by the departmental officers. |
| 7 | Hire charges for providing outside barricading arrangements upto 1.20 m height using Steel barricades of size 3.05 m x 1.20 m with MS square tubes of size 40 cm x 40 cm and 25 mmx25 mm, tied using binding wires and remove the same after the function is over and as directed by the departmental officers |
| 8 | Hire charges for providing outside barricading using casurina poles 8 to10 cm dia and 60 cm below ground level to 1.50 m above ground level and fixing 3 ties 5 to 8 cm dia casurina props barricade and remove the same after function is over as directed by the departmental officers |
| 9 | Hire Charges for Providing GI Sheet Pandal in the Open yard including conveyance and removing the same after the function is over etc complete directed by the departmental officers. |
| 10 | Hire Charges for Providing Shamiana Pandal in the Open yard including conveyance and removing the same after the function is over etc complete directed by the departmental officers. |
| 11 | Hire Charges for Providing Shamiana side drops at 1.80 m including conveyance and removing the same after the function is over etc complete directed by the departmental officers. |
| 12 | Hire Charges for Providing Carpet including conveyance and removing the same after the function is over etc complete directed by the departmental officers. |
| 13 | Hire charges for providing GI Sheets covered barricading arrangements with casurina posts of size 13cm to 15 cm dia for vertical and 5cm to 8cm dia casurina poles for horizontal ties in 3 rows . The Barricading should be 1.80 m above ground level and 0.60m below ground level . The horizontal casurina ties should be tied with vertical post using coirroppes the centre to centre to distance between the vertical casurina posts in 3.00 m to 3.30 m Barricading is covered with Gi corrugated sheets of thick 0.40mm using nails of the both ends . Sloped supports bracing with around should be done whreever required for stability against galewinds . The rate including dismantling ,conveyance charges etc., complete as directed by the departmental officers. |
| 14 | Hire charges for Drop gate arrangements including cost of materials conveyance and removing the same after the function is over etc complete directed by the departmental officers. |
| 15 | Hire charges for PVC chairs including conveyance and removing the same after the function is over etc complete directed by the departmental officers. |
| 16 | Hire charges for Stainless steel Table including conveyance and removing the same after the function is over etc complete directed by the departmental officers. |
| 17 | Hire charges for Stainless steel Table with cloth cover including conveyance and removing the same after the function is over etc complete directed by the departmental officers. |
| 18 | Hire charges for S Type chair including cost of loading and unloading etc complete |
| 19 | Hire charges for Stainless steel sink including conveyance and removing the same after the function is over etc complete directed by the departmental officers. |
| 20 | Hire charges for MS Ladder 4.0 m length 45cm width using 50x50x6mm MS Angle including conveyance and removing the same after the function is over etc complete directed by the departmental officers. |
| 21 | Hire charges for sofa set (3+1+1) including conveyance and removing the same after the function is over etc complete directed by the departmental officers. |
| 22 | Providing Pigeon hole unit of size 1.20x1.20m made using 12mm thick plywood with partitions of size 1.20x 0.15 m as directed by the departmental officers |
| 23 | Providing wooden tray of size 1.20x1.20m made using 12mm thick plywood and as directed by the departmental officers |
| 24 | Supplying and fixing Flex banner stand made of all round 2x1 C.W Reepers and fixing the flex banner and fixed in ground using casurina poles of required size and height and as directed the rate includes fixing and dismantling conveyance charges etc., complete |
| 25 | Providing stickers over counting table and partition including conveyance and removing the same after the function etc complete directed by the departmental officers. |
| 26 | Providing Pigeon hole unit for VVPAT Counting made using 4mm thick Acrylic sheet with partitions of size 0.10x0.10x 0.15 m and as directed by the departmental officers |
| 27 | Hire charges for 3'0x 2'0 \\" Plywood counting table including cost of loading and unloading etc complete |
| 28 | Labour and hire charges for materials and cost of labour for erection of HIPPED ROOF RAIN PROOF, FIRE PROOF ARABIAN TENT size of 20'0\\" * 20'0\\" with M.S. Pipe truss using 50mm square tube base plate to a height of 8'0\\" in sides and covered with rain proof PVC sheet and fixing the prefabricated ready to use members with bolts and nuts, zine washers, spreading the PVC sheet in top and fixing firmly in the top purlins and ridge purlins including conveyance of materials to the site and removing the same after the function is over and taken by the contractor |
| 29 | Dismantling clearing away and carefully stacking of materials useful for reuse of Brick / stone masonry in Cement mortar walls under 3m high as directed by the departmental Officer |
| 30 | Dismantling, clearing away and carefully stacking materials useful for re-use for any thickness of RCC as directed by the departmental Officer |
| 31 | Supply and filling in foundation and basement with Gravel in layers of not more than 15cm.thick well rammed watered and compacted with surface vibrator, watered and consolidated etc. complete complying with standard specification and as directed by the departmental officers. |
| 32 | Supplying and erecting centering for plane surfaces such as RCC Floor/Roof Beam, Lintels, Cantilever Beams, Bed Blocks etc.. with necessary supports and strutting upto 3.60m height in all floors with all cross bracings using MS Sheets made of 10 gauge thick welded with MS angle of Size 25mm x 25mm x 3mm for boarding laid over Steel adjustable Span of Size 2m x 2m(expandable upto 3.60m) and Silver Oak Joists of Size 10 x 5 cm spaced at 50cm to 60cm c/c and supported by Steel Adjustable Telescopic Props of Size 2m x 2m (expandable upto 3.60m) made with outer steel pipe with dia 50mm (3.60mm thick) and inner steel pipe with dia 40mm (2.90mm thick) Spaced at not more than 50 to 60cm c/c , etc complete complying with standard specifications. Steel adjustable span and Steel Adjustable telescopic props shall be provided as directed by the departmental Officers. (Payment for centering shall be given after the concrete is laid). |
| 33 | Providing and laying in position, standardised concrete Mix M-20 Grade by insitu machine mix concrete adopting weighing batch method in accordance with IS 456 using 20mm and down graded hard broken granite stone jelly for all RCC items of works with minimum cement content of 325 kg/m3 and maximum water cement ratio of 0.55, including admixture (plasticiser / super plasticiser) in recommended proportions as per IS:9103 to accelerate, retard setting of concrete, improve workability without impairing strength and durability with about (5 Cu.m) 7730 kg. of 20mm machine crushed stone jelly and with about (3.3 Cu.m) 5156 kg. of 10-12mm machine crushed stone jelly and with about (4.79 cu.m) 7670 kg. of crushed stone sand, but excluding cost of reinforcement grill and fabricating charges, centering and shuttering and also including laying, vibrating with mechanical vibrators, finishing, curing, etc. and providing fixtures like fan clamps in the RCC floor/ roof slabs wherever necessary without claiming extra, etc., complete complying with standard specification and as directed by the departmental officers. The coarse and fine aggregates to be used should comply with the requirements of IS standards. (No separate payment will be made by the Department for the excess usage of materials). |
| 34 | In Second Floor |
| 35 | InThird Floor |
| 36 | Supplying, fabricating and placing in position Mild Steel / Ribbed Tor Steel reinforcement grills of all variety like HYSD/CTD/TMTand all grade like Fe 500, Fe550D, Fe 500 D etc., for all RCC works as per design given including cost of steel reinforcement and G.I. binding wire, wastage etc. complete complying with standard specification and as directed by the departmental officers.(Contractor has to make his own arrangements for the supply of steel reinforcement and binding wire) |
| 37 | Second floor |
| 38 | Third floor |
| 39 | Brick partition walls of 11.00cm thickness using best quality Fly ash Brick of size 230x110x70mm with class designation of 7.5 using Crushed stone Sand (Manual mixing) conforming to IS 13757-1993 or IS 12894-2002 in Cement Mortar 1:3 (One Cement and Three CS Sand) using hoop iron reinforcement if found necessary including Cost of Mortar Plasticizer, curing etc. complete complying with standard specification and as directed by the departmental officers. (Hoop iron reinforcement will be measured and paid for separately) |
| 40 | In Ground Floor |
| 41 | In First Floor |
| 42 | In Second Floor |
| 43 | In Third Floor |
| 44 | Plastering the surface of walls with Cement Mortar 1:5 (One cement and Five plastering sand), 20mm thick in all floors including mortar plasticizer at 200ml per 50Kg of cement used , curing etc., complete complying with standard specification and as directed by the departmental officers. |
| 45 | Painting Old Plastered Wall Surface with Two finishing coats of ready mixed (Emulsion) of approved quality and colour over the existing wall in all floors etc., complete complying with standard specification and as directed by the departmental officers. (The make, quality and colour of paint should be got approved by the Executive Engineer before use on works.) |
| 46 | Supplying and fixing in position white glazed European Water Closet of best quality and approved make with 100 mm “P” or “S” trap connecting with CI pipe of 100mm dia / PVC pipe of 110mm dia, double flapped rigid PVC black seat and seat cover with CP brass hinges including cost of white cement, cement for packing, spun yarn, teak wood plugs, brass screws, etc., including supplying and fixing 10 litres capacity PVC flushing tank fixed on to wall etc., complete with all fittings such as 15mm brass ball valve with polythene float with brass handle, union, coupling connected by means of 40mm white PVC flush hand using Indian adopter joint including all internal fittings such as 15mm brass connections, 15mm GM wheel valve, 15mm brass nipple (2 Nos.), 15mm nylon connection, TW plugs, screws and also giving necessary connection to the PVC pipe including cost of 600mm length of 110mm dia PVC pipe and painting the CI brackets with 2 coats of approved paint over one coat of red oxide primer, dismantling the masonry and re-doing the dismantled masonry to original condition etc. complete complying with standard specifications. (The EWC and flushing tank wiht all accessories should be got approved by the Executive Enginer before use on works) |
| 47 | Hire Charges for Levelling and Clearing for Vehicle Parking Area By Bull Dozer etc., Complete Complying with Standard Specification. |
| 48 | GST 18% Please Enable Macros to View BoQ information |
