|
| 1 | Providing and applying two or more coats of Premium quality emulsion (water based 100% acrylic) or approved equivalent grade interior paint in walls, ceilings and all surfaces after applying one coat of interior superior grade primer to make the surface smooth & homogeneous. The colour and pattern/colour combination of the paint shall be got approved from EIC/NABARD officials. The rate includes cost of all materials, labour, scaffolding, ladders charges, storing & safeguarding the labour in all heights. Contractor has to take all risk insurance policy from reputed insurance agency before commencement of work, contractor has to provide all precautions' and arrange safety belts, helmets to all working labour at site.(Approved make: -Asian paints royal luxury or equivalent) |
| 2 | Providing, supplying & applying cement plaster of 12 mm thick in line & level at all height with cement mortar 1:5 (1 cement : 5 sand) to walls, beams, columns, ceiling, moulds, Patta, grooves etc. including making of 75 mm dia hole in walls for AC pipe outlets as required numbers, scaffolding, curing ,finishing smooth and chipping the concrete at all levels including cost of all materials, transportation, lift, loading, unloading, curing, labour, tools and plants, taxes, duties, levies, octroi, royalties, etc. complete as per direction of Engineer -in-charge. Approved make - (Ultratech, Dalmia, ACC, Duraguard) |
| 3 | Providing and applying two or more coat of putty on interior walls/ceilings in newly plastered surface to make the surface smooth (Make: Birla/Asain paints) and sand papering the surface to ready for painting including all tools and tackles, transportation, scaffolding complete in all respect, as per the direction of EIC. |
| 4 | Providing, laying and fixing of pre-moulded and smooth polished, machine cut approved Granite stone in required combination design pattern and approved colour shade and texture, in linear as well as curvilinear portions of the building all complete laid with approved fixing material after proper chipping of old base and jointed with cement slurry, and pointingwith epoxy based water proof grout to match the shades of the stones etc, mixed with matching pigment, epoxy touch ups, including chipping, rubbing, curing, moulding and polishing to edges to give high gloss finish etc. complete at all levels and finished to line, level, plumb etc. as required, including cutting of stone slab, wastage making cut outs wherever required machine polishing. Item including cost of all required dismantling, chipping of all surfaces, all materials, epoxy, curing, fixing materials, moulding, grouting, edge curve finishing, polishing, labours & royalties, conveyance, loading and unloading, sundries, T & P etc. complete as per the specification & direction of Engineer-in charge. The colour shade, pattern, design to be finalised by the NABARD representatives. |
| 5 | Providing, laying of 1st quality vitrified wall tile confirming to to IS-15622 specifications of approved quality of size(4'X2'/ 2'x2', 1'x1', etc as required and approved by NABARD ), shape and thickness including necessary fixing method .Close jointed & grouted with proper matching grout where necessary finished with flush pointing with fix-A tile(Sika/Pidilite/Roff)& with epoxy based water proof grout to match the shades of the tiles etc. Finished to line, level, plumb, etc.as required, including cutting of stone slab, wastage making cut outs wherever required machine/hand polishing. Item including cost of all material, labour & royalties, conveyance, loading and unloading, sundries,T&p,etc complete as per the specification & direction of EIC.(Approved make-kajaria/somany/Rak) |
| 6 | Providing ,laying of 1st quality antiskid floor tile of size(1'x1' or 2'x2') and thickness of approved make confirming to IS-15622 specification in floor, skirtings over proper cement slurry/necessary fixing material and epoxy based water proof adhesive to proper slope, line and level including dismantling, cutting to required size and shape, fixing at corners and splays etc. Finishing the joints with epoxy-based water proofing grout to match the colour and shade of tiles complete as per the design &drawing with cost of all material, as per the design & drawing with cost of all materials, labour, conveyance T&P etc. All complete as per the direction of EIC.(Approved make-Kajaria/Somany/Rak) |
| 7 | Removing of old tile and mortar & Providing ,laying of 1st quality double charged vitrified floor tile of size(min size 4'x2') and thickness of approved make confirming to IS-15622 specification in floor, skirtings over proper cement slurry/necessary fixing material and epoxy based water proof adhesive to proper slope, line and level including dismantling, cutting to required size and shape, fixing at corners and splays etc. Finishing the joints with epoxy-based water proofing grout to match the colour and shade of tiles complete as per the design &drawing with cost of all material, as per the design & drawing with cost of all materials, labour, conveyance T&P etc. All complete as per the direction of EIC. (Approved make-Kajaria/Somany/Rak) |
| 8 | Providing & constructing Full Brick work with fly ash bricks having crushing strength not less than 75kg/sqcm in cement mortar (1:5). Immersing the bricks in water before use in all necessary projection splays cutting, circular moulding, corbelling etc. Including cost of conveyance, royalties, loading and unloading of all materials & cost of all labours, scaffolding, watering & curing, sundries, T&P etc. complete as per the direction of Engineer-In-Charge. All level, all height |
| 9 | Dismantling, Demolishing Asbestos/colour corrugated GI sheet manually/ by mechanical means taking all safety measures including disposal of unserviceable material within 50 metres lead as per direction of Engineer-in-charge |
| 10 | Providing, supplying & laying in position manually mixed reinforcement cement concrete of specified volumetric proportion for cement concrete structural element in volumetric proportion (1:1.5:3) of any thickness (1 cement, 1.5 coarse sand, 3 Hard granite stone crusher broken aggregates of size 20 mm and downgraded) in required thickness using HYSD bars of Fe500/Fe550 for foundation, columns, necessary lift & lead, finishing concrete surface including dismantling, entering & shuttering, cost of all materials, cost of curing, required brickwork, dismantling of old slab, removing/shifting of debris, transportation, loading, unloading, labour, T & P, taxes, duties, levies, octroi, royalties, etc. complete as per direction of Engineer -in-charge. (Make of cement-Ultratech/Dalmia/ACC ,Steel-Tata,Sail,Jindal) |
| 11 | Providing & installation of factory made 30 mm thick. WPC door shutter of required size with frame of size 50x75 mm, including labour, all accessories cost like 5\\" SS Hinges, 6' SS tower bolt, 6\\" Handle, 5\\" screw fastener etc, required hardware complete in all respect. (Make: Black cobra, Green plastwood ,Century) Minimum density 650kg/cum size:-2'6\\"x7'0\\" |
| 12 | Providing and fixing of 1st quality teak wood door frame of size 125x65 mm with shutter(32 mm thick) of required size, frames, wrought framed and fixed in position with hold fast lugs or dash fasteners required dia & length hold fast lugs or dash etc with panelling with factory made teak wood ,finishing with PU matt polish shutter by tower bolt(full cover(100 mm to 250 mm),sliding bolt-100mm,mortice/cylindrical double locking of godrej make, aldrop 250-300 mm,12-16 mm,2 sides Bow type ss door handle with continuous plate(100 to 150 mm grip)pvc door stopper, door magnet, clear vision ss peephole, hook & eye 150mm, safety chain, locks, tarbolts etc. Costs to be inclusive of cementing, plastering, door stopper, handle, lock, tarbolt, etc as per the site requirement as per the direction of EIC. |
| 13 | Providing and fixing factory made approved UPVC sliding glazed windows using toughened reflecting glass 5 mm thick up to required height dimension comprising of UPVC multichambered frame with build in roller track and sash extruded profiles duly reinforced with 1.6 + - 0.2 mm thick galvanised mild steel section made from roll forming process of required length(shape and size according to UPVC profile )appropriate dimension of UPVC extruded glazing beads and UPVC extruded interlocks ,EPDM gasket, wool pile, zinc alloy(white powder coated)touch locks with hook ,zinc alloy body with single nylon rollers(minimum wt. bearing capacity to be 40 kg)G.I fasteners of required size for fixing frame to smooth wall and necessary stainless steel screws etc. Profile of frame and sash shall be mitred cut and fusion welded at all concerns, including drilling of holes for fixing hardware’s and drainage of waters etc. filling the gaps with waterproof silicon sealant of top quality all complete as per the approved drawing & direction of EIC. The rate includes single/ double glass panes, wire mesh and silicon sealant, labour, scaffolding, ladders etc. (Approved make UPVC: -Fenesta, Glass-saint Gobain) |
| 14 | Providing and fixing factory made approved UPVC sliding Door up to required height dimension comprising of UPVC frame with build in roller track and sash extruded profiles duly reinforced with 1.6+-0.2 mm thick galvanised mild steel section made from roll forming process of required length(shape and size according to UPVC profile )appropriate dimension of UPVC extruded glazing beads and UPVC extruded interlocks, EPDM gasket, wool pile, zinc alloy(white powder coated)touch locks with hook ,zinc alloy body with single nylon rollers(minimum wt. bearing capacity to be 40 kg)G.I fasteners of required size for fixing frame to smooth wall and necessary stainless steel screws etc. Profile of frame and sash shall be mitred cut and fusion welded at all concerns, including drilling of holes for fixing hardware and drainage of waters etc. Filling the gaps with waterproof silicon sealant of top quality all complete as per the approved drawing & direction of EIC. The rate includes single/ double glass panes, wire mesh and silicon sealant, labour, scaffolding, ladders etc. (Approved make UPVC: -Fenesta, Glass-Saint Gobain) |
| 15 | Dismantling of old ventilators and providing and fixing UPVC window size(2'x3') for each bathroom with factory made UPVC white colour frame with following fittings as per design approved by NABARD, including patterned adjustable slanting fibre glass 6mm and all respective fittings. The price to be inclusive of exhaust cementing, grouting, gap filling by silicon sealant. The exhaust fan electrification complete fit and finish including wiring costing to be included. (Make: UPVC: -Fenesta, Exhaust fan: -Crompton or equivalent) |
| 16 | Dismantling and remove of old M.S balcony, utility safety grills & Providing, supplying and fixing of stainless steel (Grade 304) safety balcony & utility grills with stainless steel fly proof mesh (300 mm projection box pattern grill with Stainless steel plate rain shed at top and also Stainless steel plate at bottom) made of Hollow tubes, round pipes, channels, plates etc., including welding, grinding, buffing, polishing and making curvature (wherever required) and fitting the same with necessary stainless steel nuts and bolts complete, fixing with necessary accessories & stainless steel dash fasteners, stainless steel bolts etc., of required shape, size with suitable arrangement as per approval of Engineer-in-charge. The size of the steels are to be 3/4\\" to 2\\" depends on the designs & requirement. The rate includes finishing smooth, required plaster, cost of all materials, labour, nut, bolt, fitting, fixing, scaffolding, ladders charges, storing & safeguarding the labour in all heights. (Approved make:-Jindal, Apollo or equivalent) |
| 17 | Providing and fixing 12 mm thick toughened glass (Clear/frosted), high-grade anodized aluminium tracks and premium sliding gear including top hung system, floor guides, patch fittings, ss handles and locking mechanism. Complete in all respect as per the direction of EIC. |
| 18 | Providing and fixing in position superior quality of POP or gypsum ceiling cornice edge design mould and all side edge design mould and also POP or gypsum mould fan ring of approved manufacture including all fittings and fixings etc. Complete as per the direction of EIC, including cost of all materials, labour, T&P transportation, taxes and scaffolding etc. complete. |
| 19 | POP or gypsum ceiling all side edge design mould |
| 20 | POP or gypsum mould fan ring |
| 21 | Providing and fixing of wall almirah cabinet unit and TV unit of required size and 19 mm boiling water proof plywood of make century/Green ply with 1 mm laminate (make-Merino)of glossy finish and all required hardware fittings and materials like handles runners, glass beading, furnishing material, decorative lights etc ensure proper fit and finish. All fittings of 1st quality metal/plastic parts to be fixed as per the design and specifications of NABARD. The warranty/guarantee of ply to be provided which should be fireproof/termite proof/borer proof. |
| 22 | Providing supplying and installing manual Vertical blinds of approved make and shade including all required fitting, complete in all respect. |
| 23 | Providing, supplying, fitting of Godrej Interio Modular Kitchen with steel chef with steel shutter, Kutchina chimney, kutchina cooktop ,modular sink Franke, plain shelf, top plain shelf, carcass side panels, counter plain shelf, thali unit, cooking unit, gas cylinder unit, steel storage cabins, channels, all accessories like pull outs, corner solutions, wall units, steel chef accessories, knobs and handles, dado accessories, soft closing drawer systems, corner units, drawers and pullouts, including civil works like tiling ,R.C.C slab, granite etc Complete in all respect. The design and model of all items will be finalised by any NABARD representative . Design and installation to be carried out through OEM. The design and specifications to be finalized by NABARD. The estimated cost is around Rs. 5000 per sq ft for approx area under consideration for 200 sqft including all fittings and excluding taxes. |
| 24 | Providing and fixing Aluminium single track (min thickness 1.2 to 1.5 mm) powder coated collapsible door of required shade and size with peated mosquito mesh of proper locking system with all required tools and tackles, transportation complete in all respect.(Make-Hindalco) |
| 25 | Providing and fixing C.P Bib cock with wall flange of approved quality (Approved make-Roca or equivalent) |
| 26 | Providing & fixing PVC pipes, including all PVC fittings, including fixing the pipe with clamps with proper spacing. This includes jointing of pipes & fittings with one step PVC solvent cement & fittings with one step PVC solvent cement and testing of joints complete as per direction of EIC. (Approved make: -Supreme, oriplast) |
| 27 | Providing & fixing CPVC pipes, having thermal stability for hot &cold watermarked including all CPVC Plain & brass threaded fittings, including fixing the pipe with clamps with proper spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement & fittings with one step CPVC solvent cement and testing of joints complete as per direction of EIC. (Approved make:-Supreme, oriplast) |
| 28 | 15 mm nominal dia CPVC pipes |
| 29 | 20 mm nominal dia CPVC pipes |
| 30 | Providing and fixing C.P Pilar cock with wall flange of approved quality(Approved make-Roca or similar) |
| 31 | Providing and fixing premium quality shower with arm, modern multi spray system wall mounted with CP brass screws with concealed fittings (Approved make-ROCA) |
| 32 | Providing and fixing premium quality ball valve with CP brass screws with concealed fittings (Approved Make-Supreme) |
| 33 | Providing and fixing high quality 100 mm stainless steel grating for gully with approved make. |
| 34 | Providing and fixing heavy duty SS towel ring with brackets fixed to wooden cleats with CP brass screws with concealed fittings approved make. |
| 35 | Providing and fixing C.P Extension piece of approved quality (Approved make-Roca or equivalent) |
| 36 | Providing and fixing C.P Angle cock with wall flange of approved quality (Approved make-Roca or similar) |
| 37 | Providing and fixing required size wall mirror with light of top quality with all its hardware fittings, labour complete in all respect as per the direction of EIC. |
| 38 | Providing and fixing, testing & commissioning or required size wash basin with pedestal with 32 mm dia CP waste coupling,32 mm dia PVC waste pipe, Connection Pipe including cutting and making good the walls & floors, hardware fittings complete in all respect as directed by EIC. (Approved make-ROCA or equivalent) |
| 39 | Dismantling of existing W.B and providing ,fixing testing and commissioning of required size wardrobe cabinet wash basin with design mirror using superior quality WPC material with glossy finish with installed brackets, swan neck cock, 15 mm dia 600 mm long PVC connection pipe, material extra storage cabinet at top of glass, labour, cutting & making good the walls & floors, hardware fittings as per the direction of NABARD representative.(Approved make:-Roca or equivalent) |
| 40 | Providing and fixing C.P two in one bib cock with wall flange of approved quality (Approved make-Roca Or similar) |
| 41 | Providing and fixing C.P health faucet with wall flange of approved quality (Approved make-Roca Or similar) |
| 42 | Providing and fixing diverter including wall mounted spout with wall flange of approved quality (Approved make-Roca) |
| 43 | Providing and fixing heavy duty SS towel rack with brackets fixed to wooden cleats with CP brass screws with concealed fittings approved make. |
| 44 | Providing and fixing SS Toilet paper holder with wall flange of approved quality (Approved make-Roca or equivalent) |
| 45 | Providing and fixing C.P soap case with wall flange of approved quality (Approved make-ROCA or equivalent) |
| 46 | Dismantling of old EWC and Providing, fixing new EWC Single piece/ wall mounted with flushing cistern, including flush pipe with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required (Approved make: -ROCA or equivalent) |
| 47 | Removing, Shifting and restoration of furniture, and other required items necessary items for smooth work without any damage as directed by NABARD representatives |
| 48 | Supply and Installation of Factory fabricated modular GI Boxes installed in manner with Fixing of modular plate cover with all require necessary accessories, connection and testing etc as per Site requirement and as directed. The work includes supplying of all required Fixing of GI box modular Cover, labour cost, fittings, etc The design and colour will be chosen by NABARD representatives. (Approved make-Schneider /L&T) |
| 49 | 12 Modular GI Box(L&T /Schneider) |
| 50 | 8 Modular GI Box(L&T /Schneider) |
| 51 | 6 Modular GI Box(L&T/Schneider) |
| 52 | 4 Modular GI Box(L&T/Schneider) |
| 53 | 3 Modular GI Box(L&T/Schneider) |
| 54 | 2 Modular GI Box(L&T/Schneider) |
| 55 | 4*4 GI Box |
| 56 | 12 Modular Frame+Cover plate(L&T /Schneider Wooden Premium Quality) |
| 57 | 8 Modular Frame+Cover plate (L&T /Schneider Wooden Premium Quality) |
| 58 | 6 Modular Frame+Cover plate(L&T /SchneiderWooden Premium Quality) |
| 59 | 4 Modular Frame+Cover plate (L&T /Schneider Wooden Premium Quality) |
| 60 | 3 Modular Frame+Cover plate (L&T /SchneiderWooden Premium Quality) |
| 61 | 2 Modular Frame+Cover plate (L&T /Schneider Wooden Premium Quality) |
| 62 | 4.5*4.5 & 4.5*6.5 Bakelite Cover(GOLDMEDAL) |
| 63 | RJ Box with Cover(Fiber) |
| 64 | Supply and Fixing of 10 amp modular type switch and modular socket (2/3pin) with all required necessary accessories, connection & testing etc as per site requirement and as directed. The design and colour will be chosen by NABARD representatives. The work includes supplying of all required modular switches, sockets, labour cost & fittings, etc. all complete as per directions of EIC. (Approved make:- Schneider/ Havells/ Legrand/ Gold medal) |
| 65 | 10 A Switch (L&T/Schneider Grey) |
| 66 | 10 A Socket (L&T/Schneider Grey) |
| 67 | 16A & 20 A Switch with Indicator (L&T/Schneider Grey) |
| 68 | 16 A & 20A Socket (L&T/Schneider Grey) |
| 69 | DOL switch (L&T/Schneider Grey) |
| 70 | RJ 45 CAT 6 WIRE CONNECTOR (L&T /Schneider GREY) |
| 71 | Switch Blank (L&T/Schneider Grey) |
| 72 | Fan Regulator (L&T/Schneider Grey) |
| 73 | 2 way switch (L&T/Schneider Grey) |
| 74 | Fancy Angle Holder (Gold medal white/L&T/Schneider) |
| 75 | Ceiling Rose ( Gold medal white/L&T/Schneider) |
| 76 | Supply and Installation of Camera Based Godrej Video Door Phone With all Required Accessories, Connection & Testing. The design and colour will be chosen by NABARD representatives. The work includes supplying of all required items & labour cost, fittings, etc.(Approve Make- Godrej) |
| 77 | Supply and fixing of 16 WAY three phase metal clad double door lockable MCB Distribution Board of 415 volt rating including MCB channel and earth bar, in double door (lockable) double sheet steel enclosure on surface/recess including ,labour Cost & connection complete with in all respect as required as per direction of Engineer-in-Charge (Make of DB - L&t /Legrand/Schneider) |
| 78 | 08 Way TPN MCB DB(L&T/ Schneider) |
| 79 | 25A SP MCB(L&T/Schneider) |
| 80 | 63A FP MCB(L&T/Schneider) |
| 81 | 32A DP MCB(L&T/Schneider) |
| 82 | 16A SP MCB(L&T/Schneider) |
| 83 | 32A SP MCB(L&T/Schneider) |
| 84 | Recessed wiring with 1.0 Sqmm Cu wire (KEI/Polycab Red, Blue, Yellow, White & Black), 1.0 sqmm 2 PVC single core copper wire PVC heavy-duty Cable trunking, Including labour cost & fittings and with Complete all accessories, T&P and as directed by the engineer-in-charge |
| 85 | Recessed wiring with 1.5 sqmm 2 PVC single core copper wire PVC heavy-duty Cable trunking, including labour cost and complete with all accessories and as directed by the engineer-in-charge. |
| 86 | 1.5 Sqmm Cu wire (KEI/Polycab Red, Blue, Yellow, White & Black) |
| 87 | 0.7 Sqmm Cu wire (KEI/Polycab Green Colour) |
| 88 | Recessed wiring with 2.5 Sqmm 2 PVC single core copper wire PVC heavy-duty Cable trunking, including labour cost and complete with all accessories and as directed by the engineer-in-charge. |
| 89 | 20 mm HMS PVC Pipe (Make AKG/Polycab) |
| 90 | 20 mm HMS PVC Bend (Make AKG/Polycab) |
| 91 | 2.5 Sqmm Cu wire (KEI/Polycab Red,Blue,Yellow,White & Black) |
| 92 | 0.7 sqmm cu wire (KEI/Polycab Green Colour) |
| 93 | Recessed wiring with 4 Sqmm 2 PVC single core copper wire PVC heavy-duty Cable trunking, including labour cost and complete with all accessories, T&P and as directed by the engineer-in-charge. |
| 94 | 4.0 Sqmm Cu wire(KEI/Polycab Red,Blue,Yellow,White & Black) |
| 95 | 0.7 sqmm cu wire (KEI/Polycab Green Colour) |
| 96 | Recessed wiring with 6 Sqmm 2 PVC single core copper wire PVC heavy-duty Cable trunking, Including labour cost and complete with all accessories and as directed by the engineer-in-charge |
| 97 | 25 mm HMS PVC Pipe (Make AKG/Polycab) |
| 98 | 25 mm HMS PVC Bend (Make AKG/Polycab) |
| 99 | 6.0 Sqmm Cu wire (KEI/Polycab Red,Blue,Yellow & Black) |
| 100 | 1.0 sqmm cu wire (KEI/Polycab Green Colour) |
| 101 | Supply & Installation of Custom Design light, Wall light, Foot light , Bed Light, Surface Light & Name plate with Light including Labour Cost, Fitting with all accessories etc. |
| 102 | Mirror Light |
| 103 | Modern Jhumar light |
| 104 | Modern Wall lamp |
| 105 | 03 Module skirting Light (L&T/Schneider grey) |
| 106 | 24w LED SURFACE CEILING LIGHT WHITE (PHILLIPS\HAVELLS) |
| 107 | 24w LED SURFACE CEILING LIGHT WARM WHITE (PHILLIPS\HAVELLS) |
| 108 | 18 w LED SURFACE CEILING LIGHT WARM WHITE (PHILLIPS\HAVELLS) |
| 109 | 18w LED SURFACE CEILING LIGHT WHITE (PHILLIPS/HAVELLS) |
| 110 | 12w LED SURFACE CEILING LIGHT WHITE (PHILLIPS/HAVELLS |
| 111 | 6w LED SURFACE CEILING LIGHT WHITE (PHILLIPS/HAVELLS |
| 112 | 360 DEGREE ROATING MOUNT COB SURFACE CYLINDER LIGHT (Watts prefer as per site Condition) |
| 113 | 25W LED BATTEN LIGHT |
| 114 | 45 Degree Aluminium Profile Linear Light |
| 115 | 2W LED Golden light |
| 116 | 12w LED Bulb (PHILLIPS/HAVELLS) |
| 117 | SS/ Metal Name Board as per design |
| 118 | Supply and installation, testing of all fan with all fittings complete in all respect as per the direction of Engineer-in-charge. (Approved make: - Philips/ Crompton / Havells) |
| 119 | 30W 5 STAR LED HIGHT SPEED INDICATOR BLDC 4 BLADE FAN (HAVELLS/ATOMBERG) |
| 120 | Wall Fan(HAVELLS/CROMPTON) |
| 121 | 4 BLADE SMALL FAN (HAVELLS/CROMPTON) |
| 122 | Supply and installation, testing of all Geyser with all fittings complete in all respect as per the direction of Engineer-in-charge. (Approved make: - Philips/ Crompton / Havells) Please Enable Macros to View BoQ information |