|
| 1 | Earth work in excavation by mechanical means (Hydraulic excavator) / manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan), including dressing of sides and ramming of bottoms, lift upto 1.5 m, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m.(a) All kinds of soil. |
| 2 | Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations etc. in layers not exceeding 20cm in depth, consolidating each deposited layer by ramming and watering, lead up to 50 and for all lift. |
| 3 | Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level :(a) 1:5:10 (1 cement : 5 coarse sand (zone-lll) derived from natural sources : 10 graded stone aggregate 40 mm nominal size derived from natural sources) |
| 4 | Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in foundation and plinth in:(a) Cement mortar 1:6 (1 cement : 6 coarse sand) |
| 5 | Stone work (machine cut edges) for wall lining etc. (veneer work) upto 10 metre height, backing filled with a grout of average 12 mm thick cement mortar 1:3 (1 cement : 3 coarse sand) including pointing in white cement mortar 1:2 (1 white cement : 2 stone dust) with an admixture of pigment matching the stone shade : (To be secured to the backing and the sides by means of cramps and pins which shall be paid for separately) : (a) Red sand stone - exposed face fine dressed with rough backing. (i) 40mm thick |
| 6 | 40 mm thick fine dressed stone flooring over 20 mm (average) thick base of cement mortar 1:5 (1 cement : 5 coarse sand) for top of wall up to height of 3.50 metre, including pointing with cement mortar 1:2 (1 cement : 2 stone dust) with an admixture of pigment to match the shade of stone. (a) Red sand stone |
| 7 | Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade :(a) Two or more coats on new work over an under coat of suitable shade with ordinary paint of approved brand and manufacture |
| 8 | Disposal of building rubbish / malba / similar unserviceable, dismantled or waste materials by mechanical means, including loading, transporting, unloading to approved municipal dumping ground or as approved by Engineer-in-charge, beyond 50 m initial lead, for all leads including all lifts involved. |
| 9 | Providing and laying at or near ground level factory made kerb stone of M-25 grade cement concrete in position to the required line, level and curvature, jointed with cement mortar 1:3 (1 cement: 3 coarse sand), including making joints with or without grooves (thickness of joints except at sharp curve shall not to more than 5mm), including making drainage opening wherever required complete etc. as per direction of Engineer-in-charge (length of finished kerb edging shall be measured for payment). (Precast C.C. kerb stone shall be approved by Engineer-in-charge). |
| 10 | Providing and fixing of MULTI SEATER SEESAW of make ARIHANT/ KOMPAN/ LANDSCAPE STRUCTURE/ OKPLAY/ LEO/ KAALIA.The Multi Seater Seesaw comprises four Rotational seats.The lever consists of 20 NB and 80 NB powder coated GI pipes.The bearing used in this product is heavy duty nylon bush type. The stand for see saw is made using 5O NB GI pipe. All complete as per the direction of engineer-in-charge or as per approved drawing & design given by manufacturer including earth work, c:c work up to plinth level, c:c block 1:2:4(1 cement :2 coarse sand :4 graded stone aggregate 20mm nominal size)of required size as per department / manufacturers specifications and guidelines including maintenance cost for 1st Year. |
| 11 | Providing and fixing of TODDLER SWING of make ARIHANT/ KOMPAN/ LANDSCAPE STRUCTURE/ OK PLAY/ LEO/ KAALIA.In the toddler swing the center support is made up of 80 NB GI pipes.The horizontal bars are made up of 50 NB powder coated GI pipes. The bucket seats of the toddler swing are made of rubber with anti-skid.The ball bearings are mounted inside specially designed nylon balls.The rubber seat is affixed on 6 mm thick GI chain.The seats are made with full care so that the child does not fall from it while swinging.All complete as per the direction of engineer-in-charge or as per approved drawing & design given by manufacturer including earth work, c:c work up to plinth level, c:c block 1:2:4 (1 cement:2 coarsesand:4 graded stone aggregate 20 mm nominal size) of required size as per department/manufacturers specifications and guidelines including maintenance cost for 1st Year. |
| 12 | Providing & Fixing of WHEEL CHAIR SWING for physical disable person of The arc shaped powder coated main frame of 8-Class GI Pipe connected with swinging clamps, Rubber coated chain and specially design handicap swinging seat along with height adjustment feature & supporting clamps hooks etc. A suitable GI platform to be provided at bottom side of swing for easy movement of disable person to use the play equipment at site.The play area of complete Wheel Chair swing is 2.0 Mtr. x 3.0 Mtr. Appox. and required safe play area 5x5.5 Mtr. Appox. The manufacturing of play equipment as per the All international standards (ASTM/ F1487/ F1292/ F2223/ BS/ EN/ 1176). All complete as per the direction of engineer-in-charge or as per approved drawing & design given by manufacturer including earth work, c:c work up to plinth level, c:c block 1:2:4 (1 cement:2 coarsesand:4 graded stone aggregate 20 mm nominal size) of required size as per department/manufacturers specifications and guidelines including maintenance cost for 1st Year. |
| 13 | Providing & fixing of SPRING RIDER DUCK of make ARIHANT/ KOMPAN /LANDSCAPE STRUCTURE/ OKPLAY/ LEO/ KAALIA.The spring rider being a whale/pony or bike rider provides an unlimited fun to the children riding on it The whale/pony or bike is made out from fiber reinforced plastic (FRP).The handles of duck & pony provided for gripping is made up of 15 NB GI pipes, where as the duck is made out of LLDPE in rotational molding.The duck is mounted pn a pair of heavy-duty compression spring. Also a GI flat is provided for foot rest. The spring is mounted on 5mm thick plate. And the stand for support is made out of 40 NB pipe. All complete as per the direction of engineer in charge or as per approved drawing & design given by manufacturer including earth work, c:c workup to plinth level, c:c block 1:2:4 (1cement :2 coarse sand :4 gradedstone aggregate 20mm nominal size) of required size as per department/manufacturers specifications and guidelines including maintenance cost for 1st Year. |
| 14 | Providing & fixing of SPRING RIDER BIKE (RACER) of make ARIHANT/ KOMPAN/ LANDSCAPE STRUCTURE/ OKPLAY /LEO/ KAALIA.The typical Spring is comprisesof Flexible Spring & HDPE sheets of high quality. It's specially made for kids in between 3 to 8 yrs. It's designed specially keeping in mind growing kid's mental development aspects & safety aspects. Playing on this spring rider will enable the kids to develop coordination between force & balance which is required for proper mental development .It also enhances griping power of children which will in turn strengthen growing bones.The rest is only funthat is required for emotional development of a children. All complete as per the direction ofengineer-in-charge or as per approved drawing & design given by manufacturer includingearth work,c:c work up to plinth level, c:c block 1:2:4 (1 cement :2 coarse sand :4 graded stone aggregate 20mm nominal size) of required size as per department / manufacturers specification and guidelines including maintenance cost for1st Year. |
| 15 | Providing & fixing of MINI SLIDE of make ARIHANT/ KOMPAN/ LAND SCAPE STRUCTURE/ OK PLAY/ LEO/ KAALIA.The center support of the Mini Slide is made up of 50 NB GI pipe. The slide is made from Fiber glass reinforced plastic (FRP).The thickness of the mini slide is 3-4 mm with proper reinforcement to support the module. The triangular steps of 16 SWG are provided and the ladder frame is made in 20 NB and 25 NB powder coated GI pipe. The landing support is made up of 25 NB GI pipes.The ladder is designed in such a way there won't entrap child's foot while playing.The pure polyester powder coating done on the pipes extends the life of equipment All complete as per the direction of engineer in charge or as per approved drawing & design given by manufacturer including earthwork, c:c work up to plinth level, c:c block 1:2:4 (1 cement:2 coarse sand:4graded stone aggregate 20mm nominal size) of required size as per department / manufacturers specifications and guidelines including maintenance cost for 1st Year. |
| 16 | Providing & fixing of LOOP RUNG SCRAMBLER of make ARJHANT/ KOMPAN / LANDSCAPE STRUCTURE/ OKPLAY/ LEO/ KAALIA.This loop rung provides hanging experience to the children.The frame is fabricated out of 40 NB and 25 NB powder coated GI pipes.There are nine triangular loops made from 15 NB , which are welded to the top pipe of the frame. The top pipe is made out of 80 NB GI pipes.The ladder used is designed to the side support pipe itself. All complete as per the direction of engineer-in-charge or as per approved drawing & design given by manufacturer including earthwork , c:c work upto plinth level , c:c block 1:2:4 (1cement : 2 coarse sand : 4 graded stone aggregate 20mm nominal size) of required size as per department/manufacturers specifications and guidelines including maintenance cost for 1st Year. |
| 17 | 1. Providing and fixing of MULTI ACTIVITY PLAY SYSTEM of Make ARIHANT/ KOMPAN/ LANDSCAPE STRUCTURES/ OKPLAY/ LEO/ KAALIA with consist of various activity like Roller slide,Wave slide, Spiral Slide, Net Clamber, Spiral Climber, Bridge Connector/Tunnel, Bubble panels, along with brail panels for blind childrens.The structure of complete MAPS made with B-class GI Pipes with powder coating process of 60-80 Microns.a) 3Nos. Hex Deck with Canopy: The platform shall be made of Fiber Reinforced Plastic with anti-skid surface. The platform will be powder coated. The platform should be of regular Hexagonal shape.The top canopy shall be made of Fiber Reinforced Plastic with aminimum thickness of 2-3 mm. Canopy is assembled from six modules and at the top of its dome is fixed.b) FRP Ladder: Theladder shall be made up of Fiber Reinforced Plastic with a conservative thickness of 4 mm. Ladder should have reinforcement to maintain strength and avoid bending.The top surface of the ladder should be such that it should not deserve any kind of kiddy movement.c) FRP Roller slide: In the roller slide the rollers are made up of HDPE with UVstabilized pigments of 2.5 mm thickness provided with Nylon bush and are mounted on 12mm Dia. rod and fix inslide chute.The frame of the slide is made from 50x50x5 ms angle and handrail is 25 NB GI pipes.The landing support is made from 25 NB pipes.d) Spiral Slide:Spiral slide chute is made of fiber reinforced plastic having shell thickness of 4 mm. The back side of the slides is at surface matel with platform effect slide is supported on 80 NB center GI pipe. Landing module is supported by 20 NB pipe. Railing is made up of LLDPE in roto mould process. It is support by 20 NB GI pipes. The support pipe is powder coated to avoid rusting of the pipe.e) RotoRailing: Railing is provided for all the decks for safety purpose.It is made up to low-density polyethylene plastic in rotational mould process and has a support of 20 NB powder coated GI pipes.The railing is attached to the support pipe using a nylon clamp.f) Spiral Climber: It is fabricated out of 25 NB GI pipes.The spiral structure is suitably bent and is kept standing with vertical 40 NB GI pipe support.g) Rope Net Climber: It is made out with powder coated 20 mm O.D. and 25mm O.D. GI Pipe frame having nylon clamps in PP Rope.h) Bridge Connector/Tunnel:It is made out 5mm thick FRP sheet in appropriate shape & color paving connecting arrangement at both ends.i) TactilePanel:Tactile panels to be provided at site of MAPS for the blind children.j) Bubble panel: colorful bubble panel provided around the MAPS for the more fun.k) Wave slide 1.5Mtr. : This FRP wave slide consists of ISI marked structure. The attractive FRP wave slide chute is made up of 4 mm thick fiber reinforced plastic. The structure is made up of 20 NB and 25 NB powder coated GI pipes.The slide is supported on 80 NB powder coated GI pipes. The ladder cum railing is made 20 NB and 25 NB GI pipes respectively.The platform of the slide is made up of 16 SWG GI sheet with anti-skid for firm foot grip.There are triangular steps 16 SWG GI sheet The slide chute has its end such as it causes safe landing of the child.The play area of complete MAPS is 10 Mtr.x7.5 Mtr. Appox. and required safe play area 12x9.5 Mtr.Appox. The manufacturing of play equipment as per the All international standards (ASTM/F1487/F1292/F2223/BS/EN/1176), All complete as per the direction of engineer-in-charge or as per approved drawing & design given by manufacturer including earth work, c:c work up to plinth level, c:c block 1:2:4 (1 cement:2 coarsesand:4 graded stone aggregate 20 mm nominal size) of required size as per department/manufacturers specifications and guidelines including maintenance cost for 1st Year. |
| 18 | Shifting of existing Children play equipment upto a distance of 200m including excavation, dismentling of cement concrete, welding of steel component (such as holdfast etc) if required, laying of cement concrete 1:1.5:3 for jamming the equipment and necessary labour required for shifting complete as per direction of Engineer-In-Charge. |
| 19 | PART B : MAINTENANCE |
| 20 | Maintenance for 2nd Year |
| 21 | Maintenance for 3rd Year |
| 22 | After GST correction factor of 0.973 = ₹ 15,18,931.00 |
| 23 | Add 3% Cost Index 0.973 times the item no. 10-17 & 19-20 = |
| 24 | Regular maintenance for three years (including free maintenance for 1 year) of all the newly installed children play equipment at said location in DDA park as per schedule A consists of the following :-a) Replacement/repair of parts of equipment in case of theft/ vandalism.b) Check and set right/replacement for worn bearings, misaligned moving points, adjust/tighten loose parts, covers, seats, foundation and flooring.c) Tightening nuts/bolts/screws i/c welding of various parts/joints of equipment wherever required.d) Calibration of Instrument every three months.e) Priming coat & painting coat, if required.f) Lubrication/oiling every 15 days.g) Inspect and adjustment of drive, timing and running belts.h) Replacement of damaged parts & rectification of any other defects observed as per the direction of the Engineer-in-charge except : i. Due to Force majeure or ii. Abnormally bad weather, serious loss or damage by fire or iii. Damage due to the act of god or iv. Any other cause which is in the absolute discretion of the Engineer-in-charge is beyond the contractor's control.Terms & Conditions:1. The agency shall regularly inspect & upkeep the equipment in working condition as required at all times during the contract period.2. The complaint as and when it occurred shall be attended to within 3 days during 3 years maintenance period, failing which a penalty of @ Rs. 2,000.00 per day shall be imposed and shall be recovered.3. If the equipment (or its parts) is stolen due to negligence in maintenance by the agency, the agency must replace the stolen equipment/parts. No payment will be made to the agency for this replacement (i.e., the agency bears the full cost of replacement).4. The performance guarantee(s) submitted by the agency shall be released after recording of final completion certificate (i.e. after completion of 3-year maintenance period).5. The provisional completion shall be recorded by the competent authority separately for the installation of children play equipment. However, the final completion certificate shall be recorded by the competent authority after successful completion of 3-year maintenance period.6. The security deposit withheld @2.5% of the gross amount of each Running Account (R/A) Bill/ Final Bill till the sum deducted will amount to security deposit of 2.5% of the tendered amount of the work shall be released after recording of final completion certificate by the Competent Authority (i.e. after completion of 3-year maintenance period).7. An additional amount equal to 40% of the installation cost of equipment (i.e. new equipment from S.No. 10 to 18 of schedule-A) shall be withheld apart from security deposit from each Running Account (R/A) bill, against warranty. This amount shall be proportionately released year wise after successful completion of each year of the 3-year maintenance period (including both the free and paid maintenance periods). Please Enable Macros to View BoQ information |
