|
| 1 | M&L non skid coloured ceremic tiles 7 to 8 mm thick (Square/rectangular) area of each tile exceeding 0.06 Sqm but not exceeding 0.11 Sqm, as in floors over screed bed or bedding layer of morar 15 mm in cement mortar 1:6 set and jointed in neat cement slurry and pointed in white or coloured cement to match the surface incl dismantlling floor herth or wall tiling incl removal of cement mortar bedding (but not backing) removing serveable tiles store & rubbish complete all as specified and as directed. |
| 2 | M&L non skid coloured ceremic tiles 7 to 8 mm thick (Square/rectangular) area of each tile exceeding 0.11 Sqm but not exceeding 0.18 Sqm, as in floors over screed bed or bedding layer of morar 15 mm in cement mortar 1:6 set and jointed in neat cement slurry and pointed in white or coloured cement to match the surface incl dismantlling floor herth or wall tiling incl removal of cement mortar bedding (but not backing) removing serveable tiles store & rubbish complete all as specified and as directed. |
| 3 | M&L for Glazed ceramic colour tiles in vertical surface 350x 250x 7 mm/ 450X 350X 7mm thick set and jointed in neat cement slurry and pointed in white or colour cement to matchincluding 10 mm thick rendering CM 1:4 incl dismantlling floor herth or wall tiling incl removal of cement mortar bedding (but not backing) removing serveable tiles store & rubbish complete all as specified and as directed. |
| 4 | M&L Digital coloured wall tiling of 300x600x 7-8 mm thick wall tiling on vertical surfaces, skirting/dados etc. over screed bed or bedding layer of mortar 15 mm in cement mortar 1:4 set and jointed in neat cement slurry and pointed in white / coloured cement to match the surface incl dismantlling floor herth or wall tiling incl removal of cement mortar bedding (but not backing) removing serveable tiles store & rubbish complete all as specified and as directed. |
| 5 | S&F Vitrified light shade ceramic tiles 10 mm thick (square/rectanglar) polished area of each tile not exceeding 0.36 sqm ,in floors etc., set and jointed in neat cement slurry and pointed in white or Coloured cement to matched laid over 15mm thick badding layer of CM 1:6 incl dismantlling floor herth or wall tiling incl removal of cement mortar bedding (but not backing) removing serveable tiles store & rubbish complete all as specified and as directed. |
| 6 | Ditto All as per item NO 10 but as in skirting /dado laid over 10 mm thick badding layer of CM 1:4 incl dismantlling floor herth or wall tiling incl removal of cement mortar bedding (but not backing) removing serveable tiles store & rubbish complete all as specified and as directed. |
| 7 | M&L for rendering 10mm thick on fair faces of bricks or concrete surface work in CM 1:6, finished the surfaces even & smooth with sagol finish including taking down cement or cement lime plaster of any description on brick or stone walls, including raking out joints, hacking for keys, scubbing down with water, etc.complete all as specified. |
| 8 | M&L for rendering 15mm thick on fair faces of bricks or concrete surface work in CM 1:4 finished the surfaces even & smooth with sagol finish including taking down cement or cement lime plaster of any description on brick or stone walls, including raking out joints, hacking for keys, scubbing down with water, etc.complete all as specified. |
| 9 | M&L for preparation of new/old plastered surfaces of wall applying Two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10sqm over new surfaces as in camouflage pattern complete all as specified and directed. |
| 10 | M&L for preparing new plastered surface of walls, and applying two coat of Distemper oil emulsion over a coat of putty 3mm thick complete all as specified and directed |
| 11 | M&L for complete removal old surfaces on plastered surface of walls, and applying two coat of Distemper oil emulsion over a coat of putty 3mm thick complete all as specified and directed |
| 12 | M&L for preparing old surfaces walls of distempered & painted surfaces by scraping, washing rubbbing etc and applying one coat of oil bound distemper complete all as specified |
| 13 | M&L for preparation of old painted steel surfaces of any description and applying one coat of aluminium paint complete all as specified and directed. |
| 14 | Demolition of stone slabs and tiles laid beded and pointed in any mortar of any description or thicknes in floors , aprons etc |
| 15 | M & L for Machine cut cudappah stoneslab 18-20mm thick over cementscreed base, laid and mixedwith pigment to match the shade of the slab window cills and jambs to full thickness of wall fixed in steps over cement screed bed 10mm thick in CM 1:4 and jointed with grey cement paste and slurry including rubbing and polishing complete all as specified and directed. |
| 16 | M&L 20mm thick Granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, window cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite. over screed bed or bedding layer of morar 15 mm in cement mortar 1:4set and jointed in neat cement slurry and pointed in white or coloured cement to match Colour is approved by GE. |
| 17 | M&L Machine cut pre polished kota stone slab flooring 20-25mm thick over cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing over screed bed or bedding layer of morar 20 mm in cement mortar 1:6 complete all as specified and as directed. |
| 18 | Taking down shutter of any description exceeding One Square Metre and not exceeding Two Square Metre each complete all as specified and as directed. |
| 19 | Taking down chowkhat or frame (without taking off shutter from the frame) n.exc 1.5 sqm each , removing from the site including cutting holes required for taking out existing hold fast etc. complete all as specified and as directed. |
| 20 | All as per serial Item No 18 herein above but exceeding 1.5 sqm and n.exc 04 sqm each complete all as specified and as directed. |
| 21 | Demolition of brick work or stone/boulder, masonry, built in cement mortar or cement lime mortar including all quoins, arches, pillars etc but exceeding ashlar facing and pre-cast concrete articles complete all as specified and as directed |
| 22 | M&L Brick work with sub class ‘B’ bricks, straight or curved on plan exceeding 6 metre means radius built in cement mortar 1:6 complete all as specified and as directed. |
| 23 | M&L PCC (1:2:4) type B1 using 20 mm graded stone aggregate as in hold fast, bed plate etc including necessary form work complete all as specified and as directed. |
| 24 | S&F Mild steel work as in band, straps, supports for RWP, clamps, hold fasts, wall ties, , hooks & pintle hinges and similar small articles conforming to Fe-290-0 or Gde E-165 |
| 25 | Supply & Fixing 2nd class hard wood plain ,solid straight chowkats and frames of wrought, framed rebated on the solid, rounded or chamfered, put together with glue pinned at joints. |
| 26 | S&F for 35 mm thick flush shutters, solid core construction with block board core and plywood face panels, commercial type on both sides and fitted to chowkhats complete all as specified and as directed. |
| 27 | S&F 35 mm thick Plain, framed, paneled shutters (any number of panels), with panels of timber flat on both sides (feather edged), or of 12 mm thick veneered particle board medium density, wood particle board with commercial face veneers on both faces with Seesham wood beading all round the panel made out of 20 by 15 mm , on one side and fitted to chowkhats complete all as specified and as directed. |
| 28 | S&F Glazed and Skelton shutters, 35 mm thick of Second class hard wood open rebated and prepared to receive glass, gauge etc without sash bars) edges of framing plain chamfered or rounded, fitted with cut and mitred beads for securing glass, etc, sizes of members of shutters as specified in SSR Part-I, Section 8, clause 8.24(a) (Door Shutters) complete all as specified and as directed. |
| 29 | Supply & Fixing solid PVC door frame of size 50 mm x 47 mm made out of 5 mm plain colour PVC sheet reinforced with MS square tube, fixed in opening as per specification & drawings complete all as specified and as directed. |
| 30 | M&L for factory made solid PVC panel type PVC door shutter 30mm thick consisting of frame made out of MS tubes for top and bottom rails MS frame shall be covered with moulded plain colour PVC 'C' channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheet for top rail, lock rail and bottom rails, paneling of plain colour PVC sheet to be fitted in the MS frame welded/sealed to the stiles and rails with suitable PVC sheet beading and jointed together with solvent supplying and fixing in the frame at site as per specifications and drawing given under SSR Part II 2010 complete all as specified and directed. |
| 31 | S&F Stainless steel wire cloth, 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples |
| 32 | S&F 100 mm size stainless steel butt hinges medium weight fixed with stainless screw |
| 33 | S&F aluminum anodised barrel tower bolts of extruded section of size 150 mm length |
| 34 | S&F Aluminium handle, cast type anodized size of handle 150 mm complete all as specified and as directed. |
| 35 | S&F Aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy and fixed length of bolt 250 mm complete all as specified and as directed. |
| 36 | S&F for aluminium (Die cast body) hydraulically Door closer regulated, designation No. 1, universal type, suitable for door shutters of 701 to 850 mm in width and of weight between 36 to 60 kg and fixed as in repairs. |
| 37 | M&L in repairs for Double action floor spring hydraulically regulated made up of minimum 1.25 mm thick aluminium alloy sheet foundation box, main body with stainless steel cover, governing pivot made of brass, other parts made of mild steel heavy duty and fixed includind taking down and refixing of shutter |
| 38 | M&L Preparation of new or untreated painted wood and wooden based surfaces of any description not other wise described over 10 centimetre width or girth and applying Two coats of synthetic enamel paint over a coat of pink primer complete all as specified and as directed. |
| 39 | Dismantling wrought iron or mild steel work of any description not otherwise provided for |
| 40 | S & F Rolled Mild Steel Framed work as in doors or Gates of angle or other section confirming to Fe 410 - S, with gusset plates, rails braces, etc., complete, drilled for fixing of steel sheeting or other covering and hanging and fixing complete. |
| 41 | S&F mild steel work as in posts or struts of fencing including cutting tops to shape as directed, drilling holes, notching for wire, etc, including all necessar drilling, bolting or riveting etc conforming to Fe- 290 Gde E-165. |
| 42 | S&F Rolled sections as in main and cross beams, hip and jack rafters; purlins where connected to common rafters and running rails and guides for sliding doors; fixed with angle cleats or other connecting plates Fe 410 gde E |
| 43 | S & F pre-painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50 mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws including dismantling Asbestos cement (corrugated, semi corrugated, etc sheets in roof coverings complete all as specified and directed. |
| 44 | Taking down carefully existing aluminium sliding window shutters, taking down of existing stainless steel wire mesh from aluminium sliding window shutters including existing rubber gasket complete, supply and fixing stainless steel wire mesh of dia 0.36 mm and average width of aperture 1.40 mm with and including provision of \\"U\\" clip, re-fixing the shutters in existing position, complete all as specified and directed. |
| 45 | Taking down existing aluminium joinery of any description (frame/ shutters) with all fittings (but excluding grills) complete all as specified and directed. Please Enable Macros to View BoQ information |
| 46 | Taking down existing aluminium joinery of any description (frame/ shutters) with all fittings (but excluding grills) complete all as specified and directed. Please Enable Macros to View BoQ information |
