|
| 1 | GENERAL SUMMARYNOTE: Schedule ‘A’ Part - I to XI are prepriced by MES under Ser No. 02 to 11. Bidders shall insert their lumpsum amount in the Green coloured field under Col-6 only. |
| 2 | Lumpsum price worked out by the tenderer for \\"BUILDINGS/STRUCTURES\\" as listed in Schedule ‘A’ Part- I |
| 3 | Lumpsum price worked out by the tenderer for \\"EXCAVATION & EARTHWORK INCLUDING SITE CLEARANCE AND LAND DEVELOPMENT\\" as listed in Schedule ‘A’ Part- II |
| 4 | Lumpsum price worked out by the tenderer for \\"INTERNAL WATER SUPPLY\\" as listed in Schedule ‘A’ Part- III |
| 5 | Lumpsum price worked out by the tenderer for \\"INTERNAL ELECTRIFICATION \\" as listed in Schedule ‘A’ Part- IV |
| 6 | Lumpsum price worked out by the tenderer for \\"ROAD/HARD STANDING /PATH \\" as listed in Schedule ‘A’ Part- V |
| 7 | Lumpsum price worked out by the tenderer for \\"SEWAGE DISPOSAL\\" as listed in Schedule ‘A’ Part- VI |
| 8 | Lumpsum price worked out by the tenderer for \\"AREA DRAINAGE\\" as listed in Schedule ‘A’ Part- VII |
| 9 | Lumpsum price worked out by the tenderer for \\"EXTERNAL WATER SUPPLY\\" as listed in Schedule ‘A’ Part-VIII |
| 10 | Lumpsum price worked out by the tenderer for \\"EXTERNAL ELECTRIC SUPPLY\\" as listed in Schedule ‘A’ Part- IX |
| 11 | Lumpsum price worked out by the tenderer for \\"COOLING AND HEATING APPLIANCES\\" as listed in Schedule ‘A’ Part- X |
| 12 | Lumpsum price worked out by the tenderer for \\"PILE FOUNDATION\\" as listed in Schedule ‘A’ Part- XI |
| 13 | Lumpsum price worked out by the tenderer for \\" TOE WALL\\" as listed in Schedule ‘A’ Part- XII |
| 14 | Subtotal |
| 15 | NOTE: Schedule ‘A’ Part - XIII \\"MICELLANEOUS ITEMS\\" is not prepriced by MES and prepriced rate indicated as 0.00 under Col.5 signifies this fact only. Bidder shall insert their rates in Green colour filled under Col-6. |
| 16 | Schedule ‘A’ Part-IV ( INTERNAL ELECTRIFICATION ) |
| 17 | Supply and fixing GI bracket, light grade 32 mm dia and 50 cm long including two numbers GI clamp fixed on wall with necessary fixing arrangement complete all as specified and as directed. |
| 18 | Supply and fixing MCCB DB VTPN 4 way IP-54 made of sheet steel phos phatised, powder painted with copper bus bar of size not less than 100Amps current capacity, neutral link, earth bar and Din rail 415 Volts with double door with provision for MCCB TPN as incomer and MCB outgoing complete all as specified and as directed. Note : MCBs will measured and paid separately |
| 19 | Supply and fix Shadow less light fitting having dual dome with movable arm,fully counter balanced and fixed on suspension rod, capable of having axial rotation of 360 deg.The unit to be suitable for minar or OT and capable for operation on 230 V single phase, 50 cycles mains supply having lux level > min 1,60,000 per dome with colour temp of 4300 +/- 200K, field size : 120 to 350 mm dia, llumination depth : 140 CM, CRI : 95, working distance : 50 to 180 CM and with intensity controller complete all as specified and as directed. MAKE : Medinaim, SI surgical, Shalya, Hospi light India |
| 20 | Supply and fix UPS of 3 KVA Capacity with in built battery having back up for min 30 minutes complete all as specified and as directed. |
| 21 | M&L for earthing complete with galvanized steel earth plate electrode 60cm x 60cm x 6 mm thick buried directly in ground (earth pit not less than 2.25 mtr deep below GL) with top edge of earth plate not less than 1.5 Mtr below normal ground level, earth plate surrounded from all sides by 15cm thick and packed layer of charcoal dust and common salt filling in alternate layers and electrode connections by using Galvanised wire 4 mm connected by means of bolts, nuts, check nuts and washer of galvanised iron or steel, provision of 15 mm dia GI pipe medium grade for protection of GI earth wire and 20mm dia GI pipe medium grade for watering arrangement and PCC (1:3:6) , type C1 chamber, MS funnel, wire gauge, 50 mm thick RCC 1:2:4, type B1 earth pit cover with 6 Nos, 8 mm dia high strength deformed steel TMT bars on both ways including necessary excavation in any type of soil, returning, filling in, removal of surplus soil to distance n exc 50 mtr, provision of charcoal and salt complete all as shown in electrical plate No 3 of schedule Part-I. Note: (i) Cost of GI earth strip and GI protection pipe upto 7.5mtr length shall be deemed to be included in the rate quoted for this item(ii) The unit rate shall also includes for Wire mesh, funnel, excavation, PCC chamber pit, test point complete |
| 22 | Schedule ‘A’ Part-VI (SEWAGE DISPOSAL) |
| 23 | M&L for RCC Septic tank for 100 users :-RCC Septic tank Conventional type designed to carry sewage and sullage water, excavation in any type of soil, PCC 1:4:8 below foundation, RCC M-30 Design Mix in Walls , Base Slab , Baffle walls and Roof Slab including beams etc with Vent shaft , manhole openings with cover connection etc., with effective depth of 1.5 meter and overall depth of 3 meter complete all as shown on drawing CE/TD/2022/16 Sht 1/1 as directed and specified. |
| 24 | Soakage well 3.0 M dia X 3.0 M effective depth :- M&L for Soakage wells excavation, in any type of soil, foundation in PCC 1:3:6, walls of honey combed masonry with top ring of M25 concrete including intercepting chamber and screen chamber made of Brick masonary in CM, RCC cover slab in M25/ SFRC cover, interconnecting pipes of RCC/DWC complete filled with brick bats of suitable size complete all as shown on drawing CE/TD/2022/17 Sht 1/1 as directed and specified. |
| 25 | Schedule ‘A’ Part-VIII (EXTERNAL WATER SUPPLY) |
| 26 | M &L for masonry valve chamber internal size of 600x600x600mm with 200 mm thick solid concrete block masonary, block casted using PCC 1:4:8 type D-2, built in cement and sand mortar 1:6, 15 mm plaster to thick intermal surface and external surface up to 15 cm below ground level and top of floor in CM 1:4 finished even and smooth without using extra cement 15 mm thick,MS sheet 3.15mm cover including 50x50x6 mm MS angle frame embedded in 150 mm thick PCC 1:2:4 type B-1,with 25x6 mm flat iron hold fast, handles, hinges with locking arrangments, applying one coat of red oxide primer and two coat of synthetic enamel paint to all steel surface including necessary excavation in any type of soil and disposal of surplus soil to a distance not exceeding 50m complete all as specified and directed. |
| 27 | Schedule ‘A’ Part-IX (EXTERNAL ELECTRIC SUPPLY) |
| 28 | Supply, install, testing & commissioning CPRI approved LT Panel Outdoor, floor mounted, cubical, self supported, CPRI approved make, front and rear openable, double door hinged type with locking arrangement and top canopy, suitable ventilations on both sides with wire mesh, IP-54 protection with dust and vermin proof etc. fabricated out of 3.15 mm CRCA sheet duly powder coated with 7 tank chemical process, mounted/fixed on and including MS angle iron stand /frame 40 cm height from FFL, fabricated out of 50x50x6 mm thick MS angles duly painted with black enamel synthetic paint over a red oxide primer duly grouted in PCC 1:3:6 foundation, control wiring copper stranded PVC insulated FRLS cables not less than 1.5 sqmm, suitable size/capacity of copper strips for switch gear connection from main bus bar, earth bus strip of suitable size for entire length of panel suitable size of MS gland with gland plate and alluminium lugs/thimbles for all incoming/out going cables etc.complete all as directed by Engr -in-charge including and accommodating the followings:- |
| 29 | BUSBAR: Aluminium busbars PVC colour sleeved 200 Amps capacity TPN mounted on hygroscopic insulator duly colour coded RYB sleevesINCOMING: MCCB 4 Pole 125 Α 30 ΚΑ - 01 NoOUTGOING:(i) MCCB 3 Pole 63 A 30 KA-06 No(ii) MCB SPN 32A 'C' Series 16 ΚΑ - 06 NosACCESSORIES:(i) Suitable CT's and selector switch -01 set(ii) LED type Phase Indicator with controlling fuses for RYB-01 set.(iii) Three phase electronic multimeter, 415 Volts, Model - A, class-1, 5 Amp capacity Make: - L&T or in equivalent GE, siemens, havells - 01 No.All accessories prewired with suitable size copper conductor cable or strip including foundation as per manufacturer instruction all as required and directed. Please Enable Macros to View BoQ information |
| 30 | BUSBAR: Aluminium busbars PVC colour sleeved 200 Amps capacity TPN mounted on hygroscopic insulator duly colour coded RYB sleevesINCOMING: MCCB 4 Pole 125 Α 30 ΚΑ - 01 NoOUTGOING:(i) MCCB 3 Pole 63 A 30 KA-06 No(ii) MCB SPN 32A 'C' Series 16 ΚΑ - 06 NosACCESSORIES:(i) Suitable CT's and selector switch -01 set(ii) LED type Phase Indicator with controlling fuses for RYB-01 set.(iii) Three phase electronic multimeter, 415 Volts, Model - A, class-1, 5 Amp capacity Make: - L&T or in equivalent GE, siemens, havells - 01 No.All accessories prewired with suitable size copper conductor cable or strip including foundation as per manufacturer instruction all as required and directed. Please Enable Macros to View BoQ information |
