|
| 1 | Earthwork in excavation of Hard soil in foundation within 50m. initial lead and 1.50m. initial lift including rough dressing and breaking the clods to maximum 5cm. to 7cm. laying layers not exceeding 0.30m. in depth and as per direction of the Engineer-in-charge. |
| 2 | Filling foundation and plinth with sand including watering and ramming including cost, conveyance and royality and taxes of all materials and labour with T&P required for the work etc. complete as per specification and direction of Engineer-in-Charge. |
| 3 | Cement concrete in (1:4:8) using 40mm size Hard Granite hand Broken metal including watering and curing,cost,conveyance, taxes and royalties of all materials and labour with T&P required for the work etc complete and as per specification and direction of Engineer in Charge. |
| 4 | Rigid smooth centering and shuttering for Mass concrete including dismantling them after csting including all cost, conveyance, taxes of materials and labour with T&P required for the work etc. A) Mass Concrete |
| 5 | Fly Ash Brick Masonry work in C.M. (1:6) in F&P using 23cm x 11cm x 8cm size C.B. Brick including watering and curing, cost, conveyance,taxes and royalties and labour etc complete. |
| 6 | RCC work of M-20 grade with 20mm and down grade black hard granite (crusher broken) stone chips incuding watering and curing etc. complete as per direction of Engineer-in charge. a) Columns Footing |
| 7 | b) Plinth Beam |
| 8 | c) Columns |
| 9 | d) Lintel Bend |
| 10 | e) Chajja |
| 11 | f) Roof beam |
| 12 | g) Stair Case |
| 13 | h) Roof slab |
| 14 | Supplying, fitting and placing uncoated HYSD bars reinforcement tying the grills, straighten placing them in position including cost of bindings wire 18 to 20mm gauge including cost of HYSD bar with conveyance and royalty etc. complete and as per technical specification and direction of Engineer-in charge. |
| 15 | Fly ash Brick Masonry in C.M. (1:6) in Superstructure using 23cm x 11cm x 8cm size fly ash Brick including watering and curing, cost, conveyance,taxes and royalties and labour require for the work etc complete. |
| 16 | 12mm thick Cement Plaster in C.M. (1:6) over brick work including watering and curing, cost, conveyance,taxes and royalties and labour with required for the work etc complete. |
| 17 | 16mm thick Cement Plaster in C.M. (1:6) over brick work including watering and curing, cost, conveyance,taxes and royalties and labour with required for the work etc complete. |
| 18 | 2.5cm (1\\") thick Grading Concrete in C.C. (1:2:2) over roof slab using 6.70mm sie H.G. Chips including watering, cost, conveyance,taxes and royalties and labour required for the work etc complete. |
| 19 | Supplying, Fitting and Fixing of Vetrified tiles in floors tread or steps and landing of size 600mmx600mm of approved make conforming to IS:13755 laid on 20mm thick cement mortar (1:4) and filling joints with white cement of approved quality including cost of all materials, labour T&P etc required for the work all complete as per direction of Engineer-in-Charge. |
| 20 | Fixing of Ceramic tiles in floors tread or steps and landing on 25mm thick bed on CM(1:1) jointed with neat cement slurry mixed with pigment to match the shades of the tiles including rubbing and polishing including cost, conveyance and tax of tile etc complete. |
| 21 | Fixing of Glazed wall tiles in dados, skirting riser of steps on 12mm thick cement plaster CM(1:3) jointed with neat cement slurry mixed with pigment to match the shades of the tiles including rubbing and polishing including cost, conveyance and tax of tile etc complete. |
| 22 | Fixing of Chequred tiles in floors tread or steps and landing on 25mm thick bed on CM(1:1) jointed with neat cement slurry mixed with pigment to match the shades of the tiles including rubbing and polishing including cost, conveyance and tax of tile etc complete. |
| 23 | Fixing of Granite tiles in floors tread or steps and landing on 25mm thick bed on CM(1:1) jointed with neat cement slurry mixed with pigment to match the shades of the tiles including rubbing and polishing including cost, conveyance and tax of tile etc complete. |
| 24 | Manufacturing and supply of M.S. Doors, windows, grills, vantilotors , collarseble gate and doors frame with pannel shuter made out of structural steel plates and bars conferming to IS spesification as per drawing, design, including with all cost, laour, T&P etc complete as per direction of Engineer-in-charge. |
| 25 | Labour for fitting and fixing of M.S. Grill, Doors, Windows and ventilator including all cost of labour with T&P require for the work etc complete |
| 26 | Providing & fixing plain Gypsum board ceiling suspended from roof by adsustable G.I. ceiling angle with spread at a distance not more than 300mm and to roof by Rowl plug & stiff cleat Gypsum board 12.5mm thick held by G.I. Pen meter channel MF-3 & intermediate channel MF-7 framing boanding, jointing & finishing with special type of gypsum compound etc including all cost, conveyance, taxes, labour, T&P etc required for the work all complete. |
| 27 | Providing, fitting & fixing plain of cornice for Gypsum board ceiling 4'' wide of approved quality and approved make conforming to IS with necessary bends etc complete fixed to wall with screw etc asper the direction of Engineer in charge including cost of all material with taxes labour T&P etc complete. |
| 28 | Supplying, fitting, fixing of windows (sliding type) made of aluminum Section 9778 as windows frame section No. 4095, 4096 and 9777, 3994 as shutter frame with 5mm thick black glass as panel fitted with rubber beading including locking arrangement including all fitting including cost of materials all taxes labour, T&P etc required for the work all complete. |
| 29 | Supplying, fitting, fixing aluminium door with anodized aluminium door section of 9208 as vertical member, 9021 as top, 9200 as bottom and middle member with frame section as 9221 with tapered clips No. 4660 and the frame to be completed by means of jointing angle No. 1855 including cost of labour T&P hire charges of drilling machine, labour charges etc completed including cost of laminated board |
| 30 | Finishing surface of walls with acrylic wall putty (Water based ) of approved make and finished smooth and even surface to receive painting including cost of scaffolding staging charges with cost of all materials taxes, labour T&P etc complete. |
| 31 | Weathering two coat with any approved Weather coat on new work after scraping and cleaning the surface over one coat of water bound wall primer including watering and curring all cost of materials, scaffolding, labour with T&P etc. complete as per direction of Engineer-in-charge. |
| 32 | Wall painting two coats with plastic emulsion paint with approved plastic paint on wall after scraping and cleaning the surface including watering and curring all cost of materials, scaffolding, labour with T&P etc. complete as per direction of Engineer-in-charge. |
| 33 | Painting Two coats Enamel Paint with any approved shade on new/Old Doors and windows including all cost, conveyance,tax of materials and labour with T&P required for the work etc complete. |
| 34 | Supplying, fitting and fixing of Stainless steel of 304 grade in hand railing using 50mm dia of 2mm thick circular pipe with Balustrade of size 32mm x 32mm x 2mm @ 0.90mtr. C/C and stainless square pipe bracing of size 32mm x 32mm x 2mm in 3 rows in stair case as per approved design and specification, buffing, polishing etc with cost, conveyance, taxes of all materials, labour, T&P etc. required for the complete in all respect. Please Enable Macros to View BoQ information |
