Tender For Construction Of 4 Nos F Type Staff Quarter (G+1) Of Pwd Konark In The District Of Puri For The Year 2025-26, Puri-Odisha

TDR : 54842934

Tender Notice
BOQ

9 Days Left

Puri , Odisha

Tender Brief : Tender For Construction Of 4 Nos F Type Staff Quarter (G+1) Of Pwd Konark In The District Of Puri For The Year 2025-26

Document Fees
₹ 10000 /-

EMD
₹ 127000.0 /-

Tender Value
₹ 1.26 Crore /-

Submission Date
08-04-2026

Competition Type
Indian

Bidding Type
Tender

Need a Business Loan? Apply Now !


1	Dismantling and removing doors, windows and ventilators including removal of frame, hinges, fastening and stacking the same for reuse and removing the debris within 50m lead including all cost i.e cost of all materials, all labour, all T&P etc complete and as per direction of the Engineer- in- charge.
2	Dismantling brick or stone masonry in lime or cement mortar above 3mtr height including stacking the useful materials for reuse and removing the debris within 50m lead including all cost i.e cost of all materials, all labour, all T&P etc complete and as per direction of the Engineer- in- charge.
3	Clearing and grubbing road land including uprooting vegetation, grass, bushes, shrubs, saplings and trees girth upto 300mm, removal of stumps of trees cut earlier and disposal of unserviceable materials and stacking of serviceable materials to be used or auctioned, upto a lead of 1000m including removal and disposal of top organic soil not exceeding 150mm in thickness as per section 200, clause 201 of the MoRT&H Specifications for Road & Bridge works (5th Revision) including all cost i.e cost of all materials, all labour, all T&P etc complete and as per direction of the Engineer- in- charge.
4	Building Proper
5	Paved Road
6	Single under reamed 300mm dia pile foundation 06 mtr depth with RCC M25 using 12mm size black hard granite crusher broken chips including cost of borring but excluding cost of TMT / Tor steel and labour charges for cutting, bending and binding of steel.complete in all respect and as per direction of Engineer-in-Charge.
7	Earth work in excavation in foundation in ordinary soils in trenches, column foundation, pit etc in hard soil including dressing of sides and levelling the bed upto the required depth and depositing the excavated materials away from the work site with initial lead of 50mt and all lifts including shoring, shuttering and dewatering (if required) with cost of labour , labour cess, hire and running charges of all materials complete Including all cost i.e cost of all materials, all labour, all T&P, royalty etc complete in all respect as per direction of Engineer in charge.
8	Building Proper
9	Boundary Wall
10	Supplying & Filling foundation trenches , plinth & ditches with Excavated Earth well watered and rammed in layers not exceeding 20 c.m. in depth with all lead and lift including cost, conveyance, loading, unloading, stacking, royalties and all cost & conveyance of water, cost of all Labour,labour ess,T&P required for the work etc. complete in all respect as directed by the Engineer- in -charge.
11	Building Proper
12	Boundary Wall
13	Supplying diluting and preparing chemical emulsion like CHLORPY RIPHOS or other chemicals approved by central insectiicides Board or as directed by the manufacturer and spraying the mixture uniformly by sprayer as per constructional anti termite treatment and creating a chemical barrier under and column pits and trenches basement excavation top surface of plinth filling junction of walls and floors along with external perimeter of the building expansion joints surrounding the pipes and conduits etc complete at the rate of 7.5 litters or as directed by the Manufacturer per sqm on vertical and 5.0 litters per sqm on horizontal surfaces 50% of the emulsion to be filled in the holes made in trenches at 150mm centrer to center etc complete as per IS 6313/1981 (Part-II) and as per the direction of the Engineer-in-Charge including cost of all materials, labour,taxes etc complete.
14	Building Proper
15	Boundary Wall
16	Supplying & Filling foundation trenches , plinth & ditches with clean coarse river sand well watered and rammed in layers not exceeding 23 c.m. in depth with all lead and lift including cost, conveyance, loading, unloading, stacking, royalties and all cost & conveyance of water, cost of all Labour,labour ess,T&P required for the work etc. complete in all respect as directed by the Engineer- in -charge.
17	Building Proper
18	Boundary Wall
19	Providing and laying plain cement concrete of proportion (1:3:6) in foundation and floors using 4 cm. size hard crusher broken granite stone aggregate and screened and washed sharp sand for mortar of approved quality and from approved quarry including hoisting, lowering, laying concrete, ramming, watering and curing etc. complete to required levels laid in layers not exceeding 15 cm. thick in each layer including all cost, conveyance, royalties and cost of all labours,labour cess, T&P etc complete as per specification & direction of the Engineer-in-charge.
20	Ground Floor
21	Terrace Floor
22	Boundary Wall
23	Providing, lifting, hoisting and laying Reinforced cement concrete of M-25 using 12 mm. to 20 mm. (½” to ¾”) size (20 mm. not to exceed 25%) hard crusher broken granite stone aggregate of approved quality from approved quarry including hoisting, lowering, laying and compacting concrete, watering curing, centering, shuttering and finishing the exposed surfaces smooth with all cost, conveyance, royalties, taxes of all materials with all labour,labour cess and T & P required for the work etc. complete in all respect but excluding the cost and conveyance of M.S. rods or Tor steel and binding wire of 18 to 20 gauge and labour charges for straightening, cutting, bending, binding and tying the grills and placing in proper position and as per the direction of the Engineer-in-charge.
24	Foundation
25	Ground Floor
26	Boundary Wall
27	Grade Beam
28	Ground Floor
29	Boundary Wall
30	RCC Column
31	Ground Floor
32	First Floor
33	Terrace Floor
34	Boundary Wall
35	RCC Beam
36	Ground Floor
37	First Floor
38	Terrace Floor
39	Roof Slab
40	Ground Floor
41	First Floor
42	Terrace Floor
43	RCC Stair Case
44	Ground Floor
45	First Floor
46	RCC Lintel
47	Ground Floor
48	First Floor
49	Terrace Floor
50	Boundary Wall
51	Supplying Cutting, straightening coiled or bent up M.S. Rod or tor steel of primary steel producers such as SAIL / TATA / RINL / JINDAL STEEL / SHYAM STEEL (grade Fe-500D) etc. including bending, binding, welding and jointing if necessary and tying the grills and placing in position as required for R.C.C. Work and for providing fan hooks as required, hoisting, lowering, laying including all cost, conveyances of M.S. Rod or tor steel and binding wires of 18 to 20 gauge and labour required for the work for bending, binding and tying the grills in all floors with labour cess etc. (payment will be made on standard weight of B.I.S. for M.S. Rods or tor steel only) etc. complete as per specification & direction of the Engineer-in-charge.
52	Ground Floor
53	First Floor
54	Terrace Floor
55	Boundary Wall
56	Fly Ash brick masonry in cement mortar (1:6) in Foundation and plinth using Fly Ash bricks of 25 x 12 x 8 cm size having a crushing strength of not less than 75 kg./sqcm with dimensional tolerance ± 2% including splays cutting circular moulding chamfering and corbelling and similar such type of works with all necessary projections watering and curing after immersing the bricks in water at least for six hours before use including all cost, conveyance, royalties with all labour,labour cess and T & P required for the work complete in all respect as per specification and direction of tne Engineer-in-Charge.
57	Building Proper
58	Boundary Wall
59	Fly Ash brick masonry in cement mortar (1:6) in Super structure using Fly Ash bricks of 25 x 12 x 8 cm size having a crushing strength of not less than 75 kg./sqcm with dimensional tolerance ± 2% including splays cutting circular moulding chamfering and corbelling and similar such type of works with all necessary projections watering and curing after immersing the bricks in water at least for six hours before use including all cost, conveyance, royalties with all labour,labour cess and T & P required for the work complete in all respect as per specification and direction of tne Engineer-in-Charge.
60	Ground Floor
61	First Floor
62	Terrace Floor
63	Boundary Wall
64	Fly Ash brick masonry in cement mortar (1:4) in Super structure using Fly Ash bricks of 25 x 12 x 8 cm size having a crushing strength of not less than 75 kg./sqcm with dimensional tolerance ± 2% including splays cutting circular moulding chamfering and corbelling and similar such type of works with all necessary projections watering and curing after immersing the bricks in water at least for six hours before use including all cost, conveyance, royalties with all labour,labour cess and T & P required for the work complete in all respect as per specification and direction of tne Engineer-in-Charge.
65	Ground Floor
66	First Floor
67	Providing 12mm thick cement plaster with cement mortar of mix (1:6) with screened and washed sharp sand for mortar and finished smooth to the rough surface of walls in all heights after racking out joints including watering and curing, rounding of corners, providing grooves where ever necessary with all cost, conveyance, royalties, with cost of all labour,labour cess, T&P, and scaffolding required for the work etc. complete in all respect and specification and direction of the Engineer in charge.
68	Ground Floor
69	First Floor
70	Terrace Floor
71	Boundary Wall
72	Providing 16 mm thick cement plaster with cement mortar of mix (1:6) with screened and washed sharp sand for mortar and finished smooth to the rough surface of walls in all heights after racking out joints including watering and curing, rounding of corners, providing grooves where ever necessary with all cost, conveyance, royalties, with cost of all labour,labour cess, T&P and scaffolding required for the work etc. complete in all respect as per direction of the Engineer-in-charge .
73	Ground Floor
74	First Floor
75	Terrace Floor
76	Boundary Wall
77	Providing 12mm thick cement plaster with cement mortar of mix (1:4) with screened and washed sharp sand for mortar and finished smooth to the rough surface of walls in all heights after racking out joints including watering and curing, rounding of corners, providing grooves where ever necessary with all cost, conveyance, royalties, with cost of all labour,labour cess, T&P, and scaffolding required for the work etc. complete in all respect and specification and direction of the Engineer in charge.
78	Ground Floor
79	First Floor
80	Providing 6 mm thick cement plaster with cement mortar of mix (1:4) with screened and washed sharp sand for mortar and finished smooth to the rough surface of walls in all heights after racking out joints including watering and curing, rounding of corners, providing grooves where ever necessary with all cost, conveyance, royalties, with cost of all labour,labour cess, T&P and scaffolding required for the work etc. complete in all respect as per direction of the Engineer-in-charge .
81	Ground Floor
82	First Floor
83	Terrace Floor
84	Boundary Wall
85	Supplying fitting and fixing of ISI marked 35mm thick flush door shutters confirming to IS: 2202 (Part-1) decorative type core of block board construction with frame of first class hard wood and well matched teak three ply veneering with vrtical grains or cross bands and face veneers on both face of shutter of approved design and quality including cost of all door fittings and fixtures etc. Complete as per direction of Engineer in charge.
86	Ground Floor
87	First Floor
88	Supplying, fitting, fixing of two track UPVC Sliding Window of approved make with 6mm thick glass of approved quality complete with frame, shutters and all fittings and fixtures etc complete as per direction of Engineer in charge.
89	Ground Floor
90	First Floor
91	Supplying of G.I. Grills/shutter of approved quality and design to windows and openings and staircase railing and parapet railings etc including making holes in walls and RCC structures or wood work etc in proper position making good the damages of walls or RCC or other structures complete including bending or cutting sizes or grooves in chowkhats with all cost and conveyance of all materials labour , labour cess with T&P required for the work and royalities etc.complete (including screws) in all respect in all floors as per the direction of Engineer-in-Charge .
92	Ground Floor
93	First Floor
94	Terrace Floor
95	Boundary Wall
96	Finishing surface of walls with cement based wall putty (water based) of approved make and finished smooth and even surface to receive painting including sand papering, cost of scaffolding, staging charges with cost, conveyance, taxes of all materials, cost of all labour, T&P etc. complete as per the direction of the Engineer-in-charge
97	Ground Floor
98	First Floor
99	Terrace Floor
100	Boundary Wall
101	Painting to external surface of building with two coats of weather seal coat of approved shade and quality of approved design over a coat primer after cleaning by watering & removing the dirts etc. to the surface to be painted including watering, curing, cost, conveyance of all materials, cost of all labour, brushes, T&P etc. and necessary scaffolding work complete as directed by the Engineer-in-charge.
102	Ground Floor
103	First Floor
104	Terrace Floor
105	Boundary Wall
106	Preparing surface and painting at all height with two or more coats of interior Plastic Emulsion \\"Royale Shyne\\" of Asian Paints or equivalent of approved shade over a coat of primer as per the instructions of the manufacturers; giving uniform shade etc in all heights of walls etc. including interior wall primer & providing scaffolding, cleaning, curing and supply of all materials and labour complete as per drawing, design and direction of Architect/Engineer-In-Charge.
107	Ground Floor
108	First Floor
109	Terrace Floor
110	Painting Two Coats of Synthetic Enamel Paint over Iron Works as per approved shade of approved quality, sand papering, polishing the surface including cost, conveyance,labour, T&P, scaffolding etc. as required for the work complete as per direction of Engineer-in-charge.
111	Ground Floor
112	First Floor
113	Terrace Floor
114	Boundary Wall
115	Supplying, fitting & fixing of Vitrified colour printed series tiles of thickness 8mm to 10mm in floors of size 600mm x 600mm of approved make confirming to IS:13755 laid on 20 mm thick cement mortar (1:4) (1 cement : 4 course sand) and filling joints with white cement of approved quality including cost of all materials, labour, labour cess, T&P etc. required for the work all complete as per direction of the Engineer-in-charge
116	Ground Floor
117	First Floor
118	Supplying, fitting & fixing of Vitrified colour printed series tiles in dadoes, skirting and risers of steps of size 600mmx 600mm of approved make confirming to IS:13755 laid on 12 mm thick cement mortar (1:3) (1 cement : 3 course sand) jointed with slurry mixed with pigment to match the shades of the tiles including rubbing and polishing etc. complete including cost of all materials, labour T&P etc. required for the work all complete as per direction of the Engineer-in-charge
119	Ground Floor
120	First Floor
121	Supplying, fitting & fixing of Granite Tiles of minimum 20mm thick and size above 0.40 sqm of approved make in floors over 20mm thick bed of cement mortar 1:4 jointed with cement slurry mixed with pigments to match the shade of the tiles, including rubbing & polishing etc. complete including cost, conveyance, taxes & royalties of all materials, labour with T&P complete in all respect and as per direction of the Engineer-in-charge
122	Ground Floor
123	First Floor
124	Supplying, fitting & fixing of Granite Tiles of minimum 20mm thick and size above 0.40 Sqm of approved make in dadoes, skirting and risers of nsteps laid on 12 mm thick cement mortar (1:3) (1 cement : 3 course sand) jointed with slurry mixed with pigment to match the shades of the tiles including rubbing and polishing etc. complete including cost of all materials, labour T&P etc. required for the work all complete as per direction of the Engineer-in-charge
125	Ground Floor
126	First Floor
127	Supplying, fitting and fixing hand railing of Stainless steel of 304 grade using 50mm dia of 2mm thick circular pipe with Balustrade of size 32mm x 32mm x 2mm @ 0.90mtr. C/C and stainless square pipe bracing of size 32mm x 32mm x 2mm in 3 rows in stair case as per approved design and specification, buffing, polishing etc with all cost, conveyance, taxes of all materials, cost of all labour, T&P etc. required for the complete in all respect as per direction of the Engineer-in-charge.
128	Ground Floor
129	First Floor
130	Providing and laying grading concrete 25 mm (avg. thickness) cement concrete of required slope of mix 1:2:2 (1cement:2sand:2 graded stone aggregate of 10 mm nominal size) mixed with approved water proof compound as per manufacturer's specification on top of slab including cement slurry, all complete, including the cost of water proofing admixture, which should be approved by the Engineer-In-Charge prior to material procurement by the contractor.
131	Terrace Floor
132	Construction of Granular sub-base by providing Grading-VI material as per table 400-2, spreading in uniform layers with motor grader on prepared surface, mixing by mix in place method with rotavator at OMC, and compacting with vibratory roller to achieve the desired density complete as per Clause 401 of MoRT&H Specifications for Road & Bridge works (5th Revision) & Including all cost i.e cost of all materials, all labour, all T&P, royalty etc complete in all respect and as per direction of the Engineer- in- charge.
133	Supplying and Fixing of 80mm thick cement concrete interlocking paver block of M-40 grade of approved make, design, colour & size made by Block making machine with proper compaction laid in required pattern etc. complete in all respect conforming to IRC SP- 63:2018 and as per the direction of Engineer-in-charge.
134	Providing, lifting, hoisting and laying Reinforced cement concrete of M-25 using 12 mm. to 20 mm. (½” to ¾”) size (20 mm. not to exceed 25%) hard crusher broken granite stone aggregate of approved quality from approved quarry including hoisting, lowering, laying and compacting concrete, watering curing, centering, shuttering and finishing the exposed surfaces smooth with all cost, conveyance, royalties, taxes of all materials with all labour,labour cess and T & P required for the work etc. complete in all respect but excluding the cost and conveyance of M.S. rods or Tor steel and binding wire of 18 to 20 gauge and labour charges for straightening, cutting, bending, binding and tying the grills and placing in proper position and as per the direction of the Engineer-in-charge.
135	INTERNAL ELECTRICAL WORK
136	Recessed wiring to submain in the following sq.mm FR PVC insulated single core multistrand copper conductor of ISI marked conforming to IS-694/1990 in the following mm dia non-metallic heavy duty flexible conduit 1.6 mm thick along with the following sq.mm FR PVC insulated single core multistrand copper conductor as earth wire as required.(Make of wire-Finolex/ L&T/ Anchor/ Polycab/ Havells/ Great white/ RR/ V-Guard/ HPL)
137	2 X 1.5 sq.mm +1 X 1.5 sq.mm in 20 mm dia
138	2 X 2.5 sq.mm +1 X 1.5 sq.mm -do-
139	2 X 4 sq.mm +1 X 1.5 sq.mm -do-
140	2 X 6 sq.mm +1 X 2.5 sq.mm in 25mm dia
141	Supply and drawing of following sizes FR PVC insulated single core multistrand copper conductor in existing surface/ recessed/ STEEL / PVC conduit as required.
142	1 X 1.5sqmm
143	S/F of Ding dong bell (Make - Cona/ Anchor/ Greatwhite)
144	S/F of Bakelite angle holder/ batten holder of ISI marked conforming to IS-1258/1987 in place of ceiling rose .
145	S/F of Clamp & S.hook
146	Supply of fixing of 40 mm GI Brackt with 2 nos GI clamp & 4 nos 3'' Anchor fasteners for fixing of street light.
147	Supply and fixing of following Almunium Service wire including G.I. Stay wire ISI marked.(Make- Polycab/ v-Guard/ Mahavir/ Or equivalent)
148	10 Sq.mm
149	Supply and fixing of Different type LED Lights (Make-Havells/ Cromption/ wipro/ panasonic/ Philips)
150	10 Watt 2' LED tube lights
151	20 Watt 4' LED tube lights
152	Supply and fixing of LED street light (Make-Havells/ Cromption/ wipro/ panasonic/ Philips)
153	60watt
154	Supply and fixing 10 Watt LED B.H fittings (Make-Havells/ Cona/ Panasonic)
155	Supply and fixing of Different type fan (Usha - striker/ Crompton - Super breeze Deco/ Havells - samraat/ Orient - pspo/ Or equivalent)
156	48\\" Ceilling fan
157	S/F of Exhaust fan12\\" (Make - Havells/ Usha/ Crompton/ Almonard)
158	MCB Enclosour (Make - Legrand/ Simens/ Hager/ Schinder)
159	Supply and fixing of following different DD DB BOX .(Make-Legrand/ Hager/ Simens/ schneider)
160	16way, SPN DD DB BOX.
161	Supply and fixing of 6Amp to 32A rating 240 V/415 V \\"C\\" series MCB suitable for lighting and other loads of the following poles in the exiting MCB DB ISI marked complete with connections testing and commissioning etc. (Make- Havells/ L&T/ C&S)
162	6 to 32 SP MCB
163	6 to 32 DP MCB
164	63A DP MCB
165	Earthing.
166	Supply and fixing of G.I Earthing with G.I earth pipe 3mtr. Long 40mm dia ISI marked including accessories and providing masonary with charcoal and salt as required.
167	Providing and fixing 8 SWG (4 mm) dia copper wire on surface or in recess for loop earthing along with existing surface / recessed conduit as required.
168	Recessed wiring to light point/Fan point/ Exhaust fan point/Call bell point with 1.5 sq.mm FR PVC insulated single core multistrand copper conductor of ISI marked with 20 mm dia non-metallic PVC flexible conduit with 6Amp, 250V Modular switch(Legrand mylinc/ Schneider clipsal/Hager insysta/Anchor Dura/ or equivalent) ISI marked and ceiling rose ISI marked mounted on metal box having front Modular cover of suitable size, metal box with 1.5 sq.mm FR PVC insulated single core multistrand copper conductor as earth wire including all accessories and connection.(Make of wire-L&T/Anchor/Havells/V-Guard/Great White/HPL)
169	Group-A -L.P- 13 F.P- C.B.P-
170	Group-B L.P- 25 F.P- 12 C.B.P-
171	Group-C L.P-42 F.P-20 C.B.P-4
172	Supply and fixing of 6Amp plug with 6Amp switch on existing board( Legrand mylinc/ Schneider clipsal/Hager insysta/or equivalent)
173	Supply and fixing of Modular metal box on surface or in recess with suitable size of Modular cover in front including providing and fixing of 6Amp and 6Amp Modular switches connection ( Legrand mylinc/ Schneider clipsal/Hager insysta/ or equivalent )
174	Supply and fixing of Modular metal box on surface or in recess with suitable size of Modular cover in front including providing and fixing of 6pin 6amp, 16Amp socket outlet and 16Amp Modular switches connection ( Legrand mylinc/ Schneider clipsal/Hager insysta /or equivalent)
175	Supply and fixing of Electronics step type Modular fan regulator. ( Legrand mylinc/ Schneider clipsal/Hager insysta/or equivalent)
176	S/F of Multipurpose board consisting 2nos. 6Amp plug and switch with all connections ( Legrand mylinc/ Schneider clipsal/Hager insysta/ or equivalent)
177	Supply and fixing of Modular switch ,Socket , ( Legrand mylinc/ Schneider clipsal/Hager insysta/ or equivalent)
178	S.P. 6 amps, 2 way modular switch, ISI marked
179	16Amp socket.(Modular type )( Legrand mylinc/ Schneider clipsal/Hager insysta/ or equivalent)
180	32 A DP modular switch with indicator, ISI marked
181	S.P. 6 amps, one way modular bell push, ISI marked
182	Supply and fixing Modular base & cover
183	1/2 module
184	Supply and fixing Modular G.I. Box
185	1/2/3 module
186	Lightening Arrester
187	Supply , Installation, Testing & commissioning of 8 mm Aluminum Round Conductor.Tested as per IEC 62561.(Make:OBO/Stromking/ Satalite-3/Indilac)
188	Supply , Installation, Testing & commissioning of Roof conductor holder for parapet- Polyamide Conductor holder: With M8 female thread or diameter 7mm, M8 Screw to connect the conductor holder.Weather and temperature resistant from -35 to +90 degree Celsius tested. Conductor holder @ 1 meter distance.Tested as per IEC 62561.(Make:OBO/Stromking/ Satalite-3/Indilac)
189	Supply , Installation, Testing & commissioning of Polyamideroof cable holder for flat roof:DIN 48829 Form B1. Closed form with bottom. Filling weight1Kg (frost-resistant concrete). Sleeve from polyethylene,black @ 1 meter distance.Tested as per IEC 62561.(Make:OBO/Stromking/ Satalite-3/Indilac)
190	Supply , Installation, Testing & commissioning of Roof conductor holder - Stainless steel Conductor holder: With Bottom section and conductor holder stainless steel (V2A)Bottom section with Ø 8.5 mm slot.Tested as per IEC 62561.(Make:OBO/Stromking/ Satalite-3/Indilac)
191	Supply , Installation, Testing & commissioning of cross universal connector: For T and cross connection, to route vertical down conductor /mesh formation made of hot dipped galvanised iron with necessary screws etc as required.Installed with 4 hexagonal bolts M8*25 with M8 hexagonal nuts .Tested as per IEC 62561.
192	Supply , Installation, Testing & commissioning of expansion piece with connector: For equalising temperature related length changes. Necessary on conductors length over 20 meters. For round conductor Rd 8/ALU. Tested for 100kA lightning current.(Make:OBO/Stromking/ Satalite-3/Indilac)
193	Supply , Installation, Testing & commissioning of Connector: For T cross and parallel connectors. Quick installation using hexagonal bolt M10X30 high-grade hot dip galvanised.Tested as per IEC 62561.(2nos/expansion piece ).(Make:OBO/Stromking/ Satalite-3/Indilac)
194	Supply , Installation, Testing & commissioning of 1 mtr vertical air terminal with mounting accessories on the flat surface to meet the requirements of IS/IEC 62305. Tested for Electrical , mechanical and chemical as per IEC 62561. Tested for 100kA lightning current.(Make:OBO/Stromking/ Satalite-3/Indilac)
195	Down conductor
196	Supply , Installation, Testing & commissioning of 8 mm Aluminum Round Conductor. Tested as per IEC 62561.(Make:OBO/Stromking/ Satalite-3/Indilac)
197	Supply , Installation, Testing & commissioning of Polyamide Conductor holder:With M8 female thread or diameter 7mm, M8 Screw to connect the conductor holder.Weather and temperature resistant from -35 to +90 degree Celsius tested. Conductor holder @ 1 meter distance.Tested as per IEC 62561.(Make:OBO/Stromking/ Satalite-3/Indilac)
198	Supply , Installation, Testing & commissioning of Test Joint (Folding Clamp) suitable to connect 8mm round conductor and max by 30x3 mm GI strip as specified in drawing and directed by Engineer.Tested for 100kA lightning current.(Make:OBO/Stromking/ Satalite-3/Indilac)
199	Ring & vertical earthing system
200	Supply , Installation, Testing & commissioning of Galvanised Steel Flat 30X3 mm thickness from earth electrode directly in ground as required. Flat conductor Hot Dipped Galvanized. Tested as per IEC 62561.(Make:OBO/Stromking/ Satalite-3/Indilac)
201	Supply , Installation, Testing & commissioning of Cross connector for Flat: Suitable for 30mm Galvanised steel strip. Installed with 4 nos of hexagonal plate. Tested for 100kAlightning current.
202	Supply , Installation, Testing & commissioning of flat conductor holder- Fit: FL 30, With mounting hole 6.2 x 22 mm, With 2 cylinder bolts M6 x 16 and over-piece from hot- dip galvanised steel, Bottom section from polyamide, black. Tested as per IEC 62561.(Make:OBO/Stromking/ Satalite-3/Indilac)
203	Supply , Installation, Testing & commissioning of Plastic Corrosion Protection strip: Approx 1.1 mm thick. Width 50mm. Made of petrolatum- coated chemical fibre fabric. (Make:OBO/Stromking/ Satalite-3/Indilac)
204	Supply , Installation, Testing & commissioning of UL Listed maintenance free ,Low carbon copper coated earth rod of 3 metre electrode having diameter of 14.2 mm with copper coating thickness of 250micron tested as per IEC 62561-2 (Make:OBO/Stromking/ Satalite-3/Indilac)
205	Supply , Installation, Testing & commissioning of universal clamp made of SS to connect rod with flat conductor(Make:OBO/Stromking/ Satalite-3/Indilac) .
206	Supply , Installation, Testing & commissioning of Earth conductivity enhancing mineral compound shall be of 25 kg/pit tested as per IEC 62561-7,TCLP tested (Make:OBO/Stromking/ Satalite-3/Indilac)
207	Supply , Installation, Testing & commissioning of The above arrangements shall be provided with Heavy duty earth champer of 5000kg load bearing capacity to ensure the safety of earthing system(Make:OBO/Stromking/ Satalite-3/Indilac).
208	Fire fighting system
209	Supplying, installing and commissioning of ISI ABC Powder 4 Kg Fire Extinguisher containing Mono Ammonium Phosphate Powder 50, Stored Pressure Type,Pressure Gauge, fittted with discharge hose, wall mounting bracket etc., Discharge Time less than 15 Secs, Controllable discharge mechanism, Range minimum 4 Meters, applicable on Class A,B,C and electrically started Fire, A Rating- 8A, B Rating 34B, Can Construction : Deep drawn & Co2 Mig welded, Valve Construction : Forging & Machining, Internal Coating of Can : Epoxy Powder coating, External Coating of Can : Epoxy Polyster Powder coating, Sheet metal thickness : 1.60MM, ISI approved as per IS:15683:2006(Make: superimax/Cese fire/Minimax)
210	Supplying, installing and commissioning of CO2 Type 4.5 Kg Fire Extinguisher containing Mono Ammonium Phosphate Powder 50, Stored Pressure Type, Pressure Gauge, fittted with discharge hose, wall mounting bracket etc., Discharge Time less than 15 Secs, Controllable discharge mechanism, Range minimum 4 Meters, applicable on Class A,B,C and electrically started Fire, A Rating- 8A, B Rating 34B, Can Construction : Deep drawn & Co2 Mig welded, Valve Construction : Forging & Machining, Internal Coating of Can : Epoxy Powder coating, External Coating of Can : Epoxy Polyster Powder coating, Sheet metal thickness : 1.60MM, ISI approved as per IS:15683:2006(Make: superimax/Cese fire/Minimax)
211	Fire buckets (FILLED WITH SAND) round bottom type enamel painted, white inside & Red out side and Letter \\"FIRE\\" in black out side and handle with mounting bracket.
212	PH. Work
213	Supplying all materials, labour, T&P and providing and fixing to wall or ceiling and floor CPVC/upvc pipes and pipe fittings of the following nominal bore with clamps including making good the wall, ceiling and floor all complete as per specification and direction of the Engineer in charge(Supreme/Ashirvad/Oriplast)
214	In ground floor
215	20mm dia CPVC pipe
216	25mm dia CPVC pipe
217	25mm dia UPVC ASTM-D Pipes
218	32mm dia UPVC ASTM-D Pipes
219	In first floor
220	20mm dia CPVC pipe
221	25mm dia CPVC pipe
222	25mm dia UPVC ASTM-D Pipes
223	32mm dia UPVC ASTM-D Pipes
224	In second floor
225	40mm dia UPVC ASTM-D Pipes
226	Supplying all materials, labour, T&P and cutting grooves in pucca floors and walls for taking GI/ PVC pipes and making good the damages as per the direction of the Engineer in charge.
227	In ground floor
228	In first floor
229	Supplying all materials,labour,T&P and fixing Rotational moulded polyethylene cylindrical vertical water storage tanks conforming to IS : 12701--1996 including cutting holes through the tank and fixing mild steel tubes and fittings and providing extra sockets and jam nuts, fixing ball valve etc, including hoisting upto a height of 5 metres above ground level and placing the tank to the required position and providing 1st class K.B brickwork in cement mortar (1:6) of 0.46m height in staging and in circular protection wall to support the tank, 12mm thick cement plaster (1:6) over brickwork, R.C.C slab of size 1.60mx1.60m and 0.10m thick, R.C.C beam of 0.25mx0.30m and 2.60m average length in cement concrete(1:2:4) using 12mm size h.g chips including centering and shuttering, watering, curing, conveyance of all materials to worksite etc all complete as per specification and direction of the Engineer in charge
230	Fixing 2000Ltr Roto-moulded water storage tanks(3 layer)-In 2nd floor
231	Supplying all materials, labour, T&P and cutting holes through existing brick work including making good the damages in cement mortar ( 1:4) for taking GI pipes and fittings/ PVC pipes and fittings etc all complete as per PH specification and direction of the Engineer in charge.
232	G.F.--250mm thick wall
233	F.F.--250mm thick wall
234	Supplying all materials, labour, T&P and fitting and fixing brass/CP fittings of the following nominal bore with supply of all jointing materials complete as per specification and direction of the Engineer in charge
235	15 mm dia CP long body Bib cock (Plaza/Aquatic/Amber/Kerovit/Somany)
236	15 mm dia CP two way Bib cock(Plaza/Aquatic/Amber/Kerovit/Somany)
237	15mm dia CP angle stop cock(Plaza/Aquatic/Amber/Kerovit/Somany)
238	20mm dia CP Concealed Stop cock (Plaza/Aquatic/Amber/Kerovit/Somany/cera/Hydro)
239	15mm dia Sink cock (Plaza/Aquatic/Amber/Kerovit/Somany/cera/Hydro)
240	25mm dia CPVC Ball valve(Supreme/Ashirvad)
241	32mm dia CPVC Ball valve(Supreme/Ashirvad)
242	40mm dia CPVC Ball valve(Supreme/Ashirvad)
243	15mm dia CP flange
244	15mm dia CP extension piece
245	15mm dia CP Health Faucet (Hindware Health Faucet-Cat No-F160002CP
246	Supplying all materials, labour, T&P and cutting holes through existing brick or laterite masonry wall for taking HCI pipes and fittings including making good the damages etc all complete as per PH specification and direction of the Engineer in charge
247	250mm to 375mm thick wall
248	Supplying all materials, labour, T&P and fitting and fixing U-PVC SWR soil waste ventilating pipes and fittings of the following outside diameter conforming to ISI No. 13592/1992 to walls with nails, bobbins and wooden plugs or laying in trenches including jointing with supply of approved rubber lubricant by non-heat application method/as per manufacturer’s specification, testing, earthwork in excavation in all kinds of soil and refilling of trenches as per specification and direction of the Engineer in charge
249	110mm dia U-PVC SWR pipe(Supreme/Ashirvad/Oriplast)
250	110mm U-PVC door Tee
251	110mm dia U-PVC Plain Tee
252	110mm U-PVC door bend
253	110mm U-PVC plain bend
254	110mm dia U-PVC plain shoe bend
255	110mm dia U-PVC offset without ear
256	110mm dia. U-PVC socket plain
257	110mm dia U-PVC 'P' trap
258	110mm dia U-PVC cowl
259	125mm dia CP grating
260	PVC clamp suitable for 50mm to 110mm dia pipe
261	Supplying all materials ,labour ,T&P and fitting and fixing CP shower with 15mm or 20mm inlet including polishing etc.all complete as per specification and direction of Engineer-in-charge
262	15mm CP Revolving shower with shower Arm. (Plaza/Amber/Aquatec)
263	Supplying all materials, labour, T&P and fixing the following vitreous china Wash Down Water Closet (European type W.C pan) with integral ‘P’or ‘S’ trap to the floor with wooden plug and chromium plated pedestal screws including jointing the trap with soil pipe in cement mortar (1:1), fixing plastic seat and cover for wash down water closet with chromium plated brass hinges and rubber buffers including polishing etc all complete as per specification and direction of the Engineer in charge
264	European water closet with ‘S’ trap plain with seat cover(Parryware/Hindware/Kerovit/Somay)
265	Supplying all materials, labour T&P and and fixing 10 liters capacity low level flushing cistern with a pair of cast iron or M.S. brackets complete with fittings such as siphonic arrangements 15mm nominal size brass/pvc ball valve with polythene float CP brass handle,unions and couplings for connection with inlet, outlet and overflow pipes, 32mm dia CP long flush bend, 15mm dia pvc inlet connection pipe including cutting holes and making good the same and connecting the flush bend with cistern and closet and connceting the inlet pipe with suupply main etc all complete as per the specification and direction of the Engineer in charge
266	10 Liters capacity PVC cistern with 32mm dia flush bend (SLIMLINE WHITE (Parryware/Hindware/Kerovit/Somay)
267	Supplying all materials, labour, T&P and fixing wash basins with hole for pillar taps conforming to IS:2556-part-4-2004 with cast iron or M S brackets painted white including cutting holes in walls and making good the damages with supply of wooden plugs, screws and cement etc, fixing pedestal for wash basin recessed at the back for the reception of pipes and fittings, fixing PVC waste pipe of 32mm nominal diameter for wash basin including brass check nut complete, fixing pillar taps capstan head screw down high pressure lettered ‘Hot’ and ‘Cold’ with long screws, shanks and back nuts of 15mm dia nominal bore(Plaza make), fixing 15mm dia PVC inlet connection pipe and making connection with pillar cocks and supply mains for wash basin, fixing 32mm dia CP brass waste(Plaza make), etc all complete as per specification and direction of the Engineer in charge
268	550x400mm Wash hand basin with Porcelain pedestal(Parryware/Hindware/ Kerovit/Somay/Cera)
269	Supplying all materials, labour, T&P and fixing wash kitchen sink/laboratory sink with cast iron or M S brackets painted white including cutting holes in walls and making good the damages etc all complete as per specification and direction of the Engineer in charge
270	600x450x250 mm stainless steel kitchen sink-glossy-IS:13983 - 1994 (Jayna make)
271	Supplying all materials, labour, T&P and fixing mirror of superior glass conforming to IS:3438-1996 mounted on 6mm thick A.C sheet or plywood sheet and fixed to wooden plugs with CP screws and washers complete as per specification an direction of the Engineer in charge
272	B.E.Mirror
273	Supplying all materials, labour, T&P and fixing standard sized CP towel rail complete with CP brass brackets fixed to wooden plugs with CP screws as per specification and direction of the Engineer in charge
274	25mmx600mm long CP towel rail(Plaza/Aquatic/Amber/Kerovit/Somany)
275	CP Towel Ring(Plaza/Aquatic/Amber/Kerovit/Somany)
276	Supplying all materials, labour, T&P and fixing CP soap holder complete with CP brass brackets fixed to wooden plugs with CP screws as per specification and direction of the Engineer in charge
277	CP soap holder
278	Supplying all materials, labour, T&P and fixing standard sized glass-shelf with CP brass brackets and guard rails complete fixed to woden plugs with CP screws as per specification and direction of the Engineer in charge600mmx125mm size glass shelf with C.P guard rail
279	Supplying all materials, labour, T&P and providing cement concrete (1:2:4) with 12mm size hard broken granite chips including watering, curing, conveyance of all materials to worksite, payment of royalty, taxes etc all complete as per specification and direction of the Engineer in charge
280	In Ground floor
281	In first floor
282	Supplying all materials, labour, T&P and providing 12mm thick cement plaster (1:4) on brickwork including watering, curing, conveyance of all materials to worksite, payment of royalty, taxes etc all complete as per specification and direction of the Engineer in charge
283	In Ground floor
284	In first floor
285	Supplying all materials, labour, T&P and providing ceramic tiles in floors, treads and landing on 25mm thick bed of cement mortar 1:1 (1 cement:1 sand) joined with neat cement slurry mixed with pigment to match the shades of the tiles including rubbing and polishing complete as per direction of the Engineer in charge. (Ceramic tile 30cmx30cm Kajaria/Somany/Johnson/Orient Bell to be pre-approved by the Engineer in charge)
286	In Ground floor
287	In first floor
288	Supplying all materials, labour, T&P and fixing porcelain glazed tiles in dados skirting on 12mm thick cement plaster (1:3) jointed with neat cement slurry mixed with pigments to match the shades of the tiles including rubbing and polishing complete as per direction of the Engineer in charge. (Glazed tile of size 45cmx30cm Kajaria/Somany/Johnson/Orient Bellto be pre-approved by the Engineer in charge)
289	In Ground floor
290	In first floor
291	Factory made single leaf rigid FRP(alternately called GRP) sandwich composite door shutter of 32mm thick laminated with two GRP skins with wood grain finish fabricated using UV-stabilised Isopthalic Gelcoat and one layer of 450 gsm E-glass Chopped Strand Mat (CSM) impregnated with orthopthalic palyester resin. The thickness of the skins shall not be less than 3.00mm Expanded Polystyrone(EPS) structural foam panel of 29mm thickness and a density of 20kg/cu.mtr shall be used as core material. Wooden reinforcements made of seasoned sal wood block of cross section not less than 28mmx32mm and also necessary sal wood reinforcements for fitting the metal fittings such as tower bolts, aldrops, handles etc shall be provided. A structural adhesive compatible with (EPS) foam shall be used for bending the core material, the sal wood reiforcements and the skins. The material and process for manufacturing the door shutters shall conform to RV-TIFAC composites Design Centre's standards and specifications and the door shutters tested in conformation to IS: 4020-1998. The finish of door shutter will be plain colour white/ Ivory/ Beige/ Light grey/ Mahogany/ Teak wood or any other colour using high quality pigments. Three heavy whight mild steel butt hinges type-I(ISI marked) size 100mm are to be fitted on one side of shutter with FRP frame of size 45x90mm. (Fiber space/ Darwaja/Tarini doors/Trinayan composits/SM doors)
292	In ground floor & 1ST Floor
293	Supplying all materials, labour, T&P and constructing gully trap chamber of the following inside size with 8cm thick R.C.C precast cover slab in cement concrete (1:2:4) mix using 12mm size h.g chips, foundation concrete (1:4:8) using 40mm size hard granite metal on bed and around trap, KB brickwork in cement mortar (1:6) in F&P and inside 12mm thick cement plastering (1:3) finished with a floating coat of neat cement including fixing 100mmx100mm size HCI gully trap,150mmx150mm size CI grating etc all complete as per approved drawing, specification and direction of the Engineer in charge
294	Inside size 250mmx250mm
295	Supplying all materials, labour, T&P and constructing inspection chamber of the following size with cement concrete(1:3:6) using 40mm size hard granite metal on bed, 1st class KB brickwork in cement mortar(1:6), moulding and shaping the channel inside and benching with cement concrete (1:2:4) using 12mm size h.g chips, 12mmthick cement plaster (1:3) with punning to inside, cement flush pointing (1:3) to outside, RCC cover slab in (1:2:4) using 12mm size h.g chips with RCC man hole cover, earthwork in excavation in all kinds of soil and refilling the cavity around the chamber including watering, curing, conveyance of all materials to worksite, payment of royalty, taxes etc all complete as per approved specification and direction of the Engineer in charge
296	Inside size 760mmx760mmx460mm
297	R.C.P.C Cover(18\\" round man hole cover)
298	Supplying all materials, labour, T&P and constructing soakway pit of the following size with dry brick walling from bottom upto invert of inlet pipe and 1st class K.B brickwork in cement mortar (1:6) for the remaining height at top, cement concrete (1:4:8) using 40mm size hg chips on bed, 12mm thick cement plaster (1:4) inside and outside over masonry brickwork, gravel backing in the rear of well steining, RCC cover slab in cement concrete (1:2:4) using 12mm size hg chips fitted with iron lifting handles including earthwork in open well excavation in all kinds of soil and refilling of cavity around the pit & painting the iron works, watering, curing, conveyance of all materials to worksite, payment of royalty, taxes etc all complete as per approved specification and direction of the Engineer in charge
299	Brick masonry soakway pit 1.40m dia x 2.00m deep
300	Supplying all materials, labour, T&P and laying in trenches (to level or slope) unplasticized PVC pipes conforming to IS: 4985/2000 of the following outside dia for class–3(0.60mpa) including jointing with supply of approved solvent cement by non-heat application method/as per manufacturer’s specification, providing and laying in trench cement concrete (1:4:8) with 40mm size hard granite metal in the Type C-1 standard bedding surrounding or encasing including concrete for bedding and curing etc all complete as per PH specification and direction of the Engineer in charge.
301	110mm dia alround concrete
302	160mm dia alround concrete
303	Construction 1 nos 30 users RCC Septic tank
304	Earth work in excavation of foundation in all kinds of soil within 50m initial lead and 1.5m initial lift including rough dressing & breaking clods to maximum 5cm to 7cm and laying in layers not exceeding 0.3m in depth and as per direction of the Engineer-in-Charge.
305	- do - with addl. Depth of 1.5 m
306	Supplying all materials,labour ,T&P and filling in foundation and plinth with sand well watered and rammed including cost, conveyance of all materials to work site ,payment of royalty,taxes etc. all complete as per direction of the Engineer-in -charge
307	In ground floor
308	Supplying all materials, labour, T&P and providing cement concrete ( 1:4:8 ) with 4cm size crusher broken hard granite metal including watering, curing, cost of all materials,conveyance of all materials to work site with payment of royalty, all taxes etc all complete as per P.W.D specification and direction of Engineer-in-charge.
309	In ground floor
310	Supplying all materials, labour, T&P and providing cement concrete (1:1:5:3) with 12mm size hard broken granite chips for R.C.C works including hoisting, laying, watering, curing, conveyance of all materials to worksite, payment of royalty, taxes etc all complete as per specification and direction of the Engineer in charge
311	Supplying all materials, labour, T&P and providing rigid and smooth centering and shuttering for R.C.C works including false work and dismantling them after casting including conveyance of all materials to worksite, payment of royalty, taxes etc all complete as per specification and direction of the Engineer in charge
312	For Roof slab
313	For RCC wall
314	Supplying all materials, labour, T&P and providing M.S reinforcement for R.C.C work including cutting, bending, binding, and tying the grills and placing in position including cost of binding wire 18 to 20 gauge, conveyance of all materials to worksite, payment of royalty, taxes etc all complete as per specification and direction of the Engineer in charge
315	Supplying all materials,labour,T&P and providing 6mm CP (1:4) with cement punning on brick work including watering,curing,cost of all materials, conveyance of all materials to worksite,payment of royalty,all taxes etc.all complete as per PWD specification and direction of the Engineer-in-charge.
316	Supplying all materials, labour, T&P and providing,fitting and fixing 100mm x 100mm x 100mm SW Tee in wall including filling the recess with cement concrete (1:3:6) with 12mm size h.g chips all complete including watering, curing, conveyance of all materials to worksite, payment of royalty all complete as per specification and direction of the Engineer in charge
317	110mm dia UPVC Tee
318	Supplying all materials, labour, T&P and making MS step iron in 20mm diameter MS steel bars and fixing into walls of man hole/septic tank duly embedded in cement concrete (1:3:6) complete as per specification and direction of the Engineer in charge.
319	Supplying all materials, labour,T&P and providing Vent base in cement concrete(1:2:4) with 12mm size hard broken granite chips for R.C.C works including hoisting, laying, watering, curing, conveyance of all materials to worksite, payment of royalty, taxes etc all complete as per specification and direction of the Engineer in charge
320	Supplying all materials, labour, T&P and fitting and fixing UPVC SWR soil waste ventilating pipes and fittings to walls with nails, bobbins and wooden plugs or laying in trenches including earthwork in excavation in all kinds of soil and refilling of trenches as per specification and direction of the engineer in charge.
321	110mm diameter U-PVC SWR pipe
322	110mm dia U-PVC Plain shoe bend
323	110mm dia U-PVC Cowl
324	Filling in foundation and plinth with excavated materials, moorum including watering and ramming as directed by the Engineer in charge Please Enable Macros to View BoQ information

Tender Documents

SR No	FileName	File Description
1	Click here to download tender document	Tender Documents
2	Click here to download tender document	Tender Documents
3	Click here to download tender document	Tender Documents
4	Click here to download tender document	Tender Documents

Also Visit

Tenders

Odisha Tenders

Construction Tenders

Building Construction Tenders

Building Work Tenders

Disclaimer

We takes all possible care for accurate & authentic tender information, however Users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender.

Top

Tender For Construction Of 4 Nos F Type Staff Quarter (G+1) Of Pwd Konark In The District Of Puri For The Year 2025-26, Puri-Odisha

Tender Documents

Disclaimer

About Us

Services

Browse Tenders

For Sales Inquiry

Tender For Construction Of 4 Nos F Type Staff Quarter (G+1) Of Pwd Konark In The District Of Puri For The Year 2025-26, Puri-Odisha

Tender Documents

Disclaimer

OTP Verification

About Us

Services

Browse Tenders

For Sales Inquiry

Connect With Us