Tender For Construction Of D-Type Staff Qtrs For Government Polytechnic School For The Year 2025-26, Nayagarh-Odisha

TDR : 54842927

Tender Notice
BOQ

9 Days Left

Nayagarh , Odisha

Tender Brief : Tender For Construction Of D-Type Staff Qtrs For Government Polytechnic School For The Year 2025-26

Document Fees
₹ 10000 /-

EMD
₹ 219000.0 /-

Tender Value
₹ 2.18 Crore /-

Submission Date
08-04-2026

Competition Type
Indian

Bidding Type
Tender

Need a Business Loan? Apply Now !


1	Earth Work in exavation of foundation in hard soil within initial leads of 50m & lifts of 1.5m including dressing and levelling of bed etc. and adding contractor's profit and over head charges, etc. complete in all respect for the work as directed by the Engineer-in-charge.
2	Supplying & filling of foundation with course sand well watered and rammed including cost, cost of all labour, carriage, royalty complete in all respect. (As Per A/R Page No-1, Item No-2)
3	Cement Concrete (1:3:6) using 4cm size hard granite C.B. metal approved quality from approved quarry including cost, carriage, royalty, cost of all labour. etc complete.
4	RCC work of M-20 grade in the following Structural building works using 20mm down graded hard black granite Crusher broken aggregates of approved quality from approved quarry including mixing hoisting lowering laying compacting concrete using concrete mixer, vibrator watering and curing for four weeks centering and shuttering and finishing the exposed surfaces smooth as per relevant clauses of section 1700 of MORT&H specification for Road & Bridge works (4th Revision) including hire and running charges of all machineries including cost, conveyance, royalty and taxes of all materials and labour with T&P required for the work etc. complete as per drawing and Technical Specification and as directed by the Engineer-in- Charge.(Excluding cost of reinforcement & binding wires to be used in the work)
5	RCC work of M-20 grade concrete in Column Base Footing
6	RCC work of M-20 grade concrete in Column Super Structure
7	Ground Floor
8	First Floor
9	Second Floor
10	Third Floor
11	Fourth Floor (Head Room)
12	RCC work of M-20 grade concrete in Plinth Band
13	RCC work of M-20 grade concrete in Lintel Band
14	Ground Floor
15	First Floor
16	Second Floor
17	Third Floor
18	RCC work of M-20 grade concrete in Floor Beam
19	Ground Floor
20	First Floor
21	Second Floor
22	Third Floor
23	Fourth Floor (Head Room)
24	RCC work of M-20 grade concrete in Chajja
25	First Floor
26	Second Floor
27	Third Floor
28	RCC work of M-20 grade concrete in Stair case
29	Ground Floor
30	First Floor
31	Second Floor
32	Third Floor
33	RCC work of M-20 grade concrete in Roof Slab
34	Ground Floor
35	First Floor
36	Second Floor
37	Third Floor
38	Fourth Floor (Head Room)
39	Supplying fitting and placing uncoated HYSD Steel reinforcement works using HYSD (FE-500) (SAIL Only) steel of approved manufacturer as per section 1600 §ion 1900 of MORT&H specification for Road and Bridge works ( 4th revision) including cost, conveyance and taxes of all materials, binding wires 18 to 20 gauge and labour with T&P required for the work etc. complete in all respect as per drawing and Technical Specification and as directed by the Engineer-in- Charge. (weight of reinforcement sall be calculated on the basis of IS 1732. wastage, overlaps, couplings, welded joints, space bars, chairs, stays, hangers and annealed steel wires or other method of binding & placing shall not be considered for payment)
40	Ground Floor
41	First Floor
42	Second Floor
43	Third Floor
44	Fourth Floor (Head Room)
45	Fly ash brick masonry in cement mortar (1:6) in Superstructure using bricks of “25cm x 12cm x 8cm\\" size having a crushing strength of not less than 75 Kg. Per Sq. Cm. including immersing in water till saturation before use, Including splays cutting, circular molding, chamfering and corbelling and all similar type of operations with all necessary projections watering and curing etc. complete including cost and conveyance royalty and taxes of all materials and labour with T&P required for the work etc. complete in all respect in all floors as per drawing and Technical specification and as directed by the Engineer-in-Charge.
46	in Foundation and Plinth
47	in Super Structure
48	First Floor
49	Second Floor
50	Third Floor
51	Fourth Floor (Head Room)
52	At Outer side 12 mm (1/2\\") thick Cement Plaster (1:6) finished smooth to masonry brick walls after raking out the joint including watering and curing with cost and conveyance royalty and taxes of all materials and labour with T&P required for the work etc. complete in all respect as per drawing and Technical Specification and as directed by the Engineer-in-Charge.
53	Ground Floor
54	First Floor
55	Second Floor
56	Third Floor
57	Fourth Floor (Head Room)
58	In Inner Side 16 mm thick Cement Plaster (1:6) finished smooth to masonry brick walls after raking out the joint including watering and curing with cost and conveyance royalty and taxes of all materials and labour with T&P required for the work etc. complete in all respect as per drawing and Technical Specification and as directed by the Engineer-in-Charge.
59	Ground Floor
60	First Floor
61	Second Floor
62	Third Floor
63	Fourth Floor (Head Room)
64	6mm thick cement plaster (1:4) over RCC works including deep chipping, finished smooth with proper thickness, watering, curing for required days with cost, conveyance, royality, taxes of all materials and labour with T&P required or the work etc. complete in all respect as per drawing and technical specification and as directed by the Engineer-in-Charge.
65	Ground Floor
66	First Floor
67	Second Floor
68	Third Floor
69	Fourth Floor (Head Room)
70	Supplying, fitting and fixing Vetrified tile in floors of approved make conformaing to IS:13755 laid on 20 mm thick cement mortar (1:4) and filling joints with white cement of approved quality including cost of all materials, etc. required for the work all complete as per direction of E.I.C.
71	First Floor
72	Second Floor
73	Third Floor
74	Supplying, fitting and fixing Granite tile in floors of approved make conformaing to IS:13755 laid on 20 mm thick cement mortar (1:4) and filling joints with white cement of approved quality including cost of all materials, etc. required for the work all complete as per direction of E.I.C.
75	Ground Floor
76	First Floor
77	Second Floor
78	Third Floor
79	Supplying, fitting and fixing Industrial Virtified tile in floors of approved make conformaing to IS:13755 laid on 20 mm thick cement mortar (1:4) and filling joints with white cement of approved quality including cost of all materials, etc. required for the work all complete as per direction of E.I.C.
80	Ground Floor
81	Fixing tiles in dados skirting and risers of steps on 12mm thick CP (1:3) jointed with neat cement slurry mixed with pigments to match the shade of the tiles including cost, carriage, cost of all labour etc. complete.
82	Ground Floor
83	First Floor
84	Second Floor
85	Third Floor
86	Priming 1 coat with wall primer water bond cement primer including all labour, materials etc. complete.
87	Ground Floor
88	Outer
89	Inner
90	Second Floor
91	Outer
92	Inner
93	Third Floor
94	Outer
95	Inner
96	Fourth Floor (Head Room)
97	Outer
98	Inner
99	Finishing wall surface with Cement based wall putty (water based) of approved make and finished smooth & even surface to receive painting including cost of scaffolding etc. with cost of all materials, labour etc. complete.
100	Ground Floor
101	First Floor
102	Second Floor
103	Third Floor
104	Fourth Floor (Head Room)
105	Wall painting 2 coats with plastic emulsion paint of approved shade on new work to give an even shade including cost of paint etc complete.
106	Ground Floor
107	First Floor
108	Second Floor
109	Third Floor
110	Fourth Floor (Head Room)
111	Wall painting two coat with any approved weather coat paint including cost of all materials, labour and T&P require for the work etc. complete as directed by the E.I.C.
112	Ground Floor
113	First Floor
114	Second Floor
115	Third Floor
116	Fourth Floor (Head Room)
117	Supplying, fitting, fixing of all types of MS Grills / Gates / MS Door made of ISI marked standard MS Angles of approved thickness and quality of approved Manufacturers with all required iron and aluminum fittings, including mending to sizes supplying and fixing hinged cleats, sand blocks and fixing of oxidized iron or chromium plated iron aldrops, tower bolts, knobs or rings or handles, hinges, screws and other fittings, etc. complete as per requirement including cost, conveyance and taxes of all materials and labour with T&P required for the work etc. complete in all respect as per drawing and Technical Specification and as directed by the Engineer-in-Charge.
118	First Floor
119	Window
120	Second Floor
121	Window
122	Third Floor
123	Window
124	Supplying, fitting and fixing of stainless steel of 304 grade in hand railing using 50 mm dia of 2 mm thick circular pipe with Balustrade of size 32 mm x 32mm x 2mm @ 0.90 mtr C/C and stainless aquare pipe bracing of size case as per approved design and specification, buffing, polishing etc. with the cost, conveyance taxses of all material, cost of all labour etc. complete in all respect as per drawing and Technical Specification and as directed by the Engineer-in-Charge.
125	Ground Floor
126	First Floor
127	Second Floor
128	Third Floor
129	Providing and Fixing ISI marked 35mm thick flush door shutters with Frame conforming to IS : 2202 (part I) decorative type, core of block board construction with frame of 1st class hard wood and well matched teak three ply veneering with vertical grains or cross bands and face veneers on both faces of shutters of approved design including cost of all door fittings and fixtures etc. complete. SR-2022, Page 234, Sl No-9
130	First Floor
131	Second Floor
132	Third Floor
133	Supplying, fitting, fixing of two track UPVC Sliding window track UPVC sliding window of approved make with 6mm thick glass of approved quality complete with 6mm thick glass of approved quality complete with frame. Sutters and all fitting and fixtures. SR-2022, Page 235, Sl No-12
134	First Floor
135	Second Floor
136	Third Floor
137	Painting two coats with approved enamel paints of approved colour, shade over a coat of primer including sand papering, polishing the surface, cost, conveyances of all materials and cost of all labour etc, complete as per specification & direction of E.I.C.
138	First floor
139	Second Floor
140	Third Floor
141	Fourth Floor (Head Room)
142	25mm thick CC 1:2:2 with 6mm size CB chips for grading concret over roof slab etc. complete.
143	Third Floor
144	Fourth Floor (Head Room)
145	INTERNAL EI
146	Wiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in surface / recessed medium class PVC conduit, with modular switch, modular plate, suitable GI box and earthing the point with 1.5 sq.mm. FRLS PVC insulated copper conductor single core cable etc as required.Group B
147	Group C
148	Recessed wiring for 2 x 6 amp socket outlet controlled by 2 nos 6Amp, 250 V clip in type switch ISI marked mounted on single G.I moular box with face plate & cover of suitable size including all accesories and connection on separate board as per direction of Engineer in Charge.
149	Supply and fixing of 6Amp plug with 6Amp switch on existing board (Modular type)
150	Supplying,fixing of 1x16A Plug on the separate board with complete fitting by 01 no of 16A switch & socket(modular type)( flame retradant type)) with suitable size modular box & cover( falme retradant type) including supplying of all required accessories of ISI marked as approved as per direction of engg- in-charge..
151	Supplying,fixing of 3x6A Plug on the separate board with complete fitting by 01 no of 16A+3 nos 6A switch & socket(modular type) (anti bactorial & flame retradant type) with suitable size modular box & metallic cover plate ncluding supplying of all required accessories of ISI marked as approved as per direction of engg-in-charge(Make- Legrand / Roma/ Havells)
152	Recessed wiring for A.C/ Power socket outlet with industrial type socket outlet, plug top and metal chained cover in sheet steel enclosure ,20A/32A SP MCB including all accesories and connection as per direction of Engineer-in-charge.
153	Recessed wiring to submain in 2 x 1.5 sq.mm FR PVC insulated single core multistrand copper conductor of ISImarked confirming to IS-694/1990 in 20 mm dia flexible non-mettalic PVC conduit 1.6 mm thick alongwith 1 x 1.5 sq.mm FR PVC insulated single core multistrand copper conductor as earth wire as equired.(Makeof wire Finolex/L&T/Anchor/Havels/V Guard)
154	Recessed wiring to submain in 2 x 2.5 sq.mm FR PVC insulated single core multistrand copper conductor of ISImarked confirming to IS-694/1990 in 20 mm dia flexible non-mettalic PVC conduit 1.6 mm thick alongwith 1 x 1.5 sq.mm FR PVC insulated single core multistrand copper conductor as earth wire as equired.(Makeof wire Finolex/L&T/Anchor/Havels/V Guard)
155	Recessed wiring to submain in 2 x 4 sq.mm FR PVC insulated single core multistrand copper conductor of ISImarked confirming to IS-694/1990 in 20 mm dia flexible non-mettalic conduit 1.6 mm thick alongwith 1 x 1.5 sq.mm FR PVC insulated single core multistrand copper conductor as earth wire as equired.(Makeof wire Finolex/L&T/Anchor/Havels/V Guard)
156	Recessed wiring to submain in 4 x 6 sq.mm FR PVC insulated single core multistrand copper conductor of ISImarked confirming to IS-694/1990 in 32 mm diaflexible non-mettalicconduit 1.6 mm thick alongwith 2 x 4 sq.mm FR PVC insulated single core multistrand copper conductor as earth wire as equired.(Makeof wire Finolex/L&T/Anchor/Havels/V Guard)
157	Recessed wiring to submain in 2 x 6 sq.mm FR PVC insulated single core multistrand copper conductor of ISImarked confirming to IS-694/1990 in 20 mm dia flexible non-mettalic conduit 1.6 mm thick alongwith 1 x 4 sq.mm FR PVC insulated single core multistrand copper conductor as earth wire as equired.(Makeof wire Finolex/L&T/Anchor/Havels/V Guard)
158	Supply, Installation, Testing and Commissioning of ceiling fan 1200mm sweep, including wiring the down rods of standard length (upto 30 cm) with 1.5 sq.mm FR PVC insulated single core multiatrand copper conductor etc. as required.
159	Supply, Installation, testing and commissioning of exhaust fan of 300 mm sweep 900 rpm in the existing opening, including making the hole to suit the size of the above fan, making good the damage complete, connection, etc as required.
160	Ceiling/ Wall mounted type BULK HEAD Luminaire with Similar to JAQUAR Cat No.CWLL01V109XX or equivalent.
161	Supplying and fixing of surface mounted indoor type 18W SINGLE LED TUBE Luminaire with LED Lamp Similar to WIPRO Cat No. WIO921208 / JAQUAR / Philips / Halonix / Panasonic or equivalent.
162	SITC of Sleek LED 10 watt mirror light fitting with extruded polycarbonate housing,High optically efficient diffuser,above wash basin complete with all accessoriesetc. directly on wall, including connection with 1.5 sq. mm FRLS PVC insulated, copper conductor, single core cable and earthing etc. as required as per direction of Engg.-in-Charge.(Make: Panasonic/LT/Havells /Philips/Wipro /Crompton/Bajaj)The luminaire should be Replacement Warranty will be 2 years
163	Supplying and fixing of Call Bell / Buzzer ISI marked suitable for DC /AC single phase 230 volts complete as required.
164	Supplying and fixing of PVC batten/angle holder including connection etc. as required.
165	Supply and fixing of single pole MCB with sheet steel enclosure, distribution board, on surface / recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, detachable gland plate, interconnection, phosphate and powder painted including earthing etc. as required ( But with out MCB/ RCCB/ ISOLATOR)12 way, SPN, double door, MCB DB
166	Supply and fixing of 5 amp to 32 amp rating 240 V \\"C\\" series miniature circuit breaker suitable for inductive loads of the following poles in the existing MCB DB ISI marked complete with connections testing and commissioning etc. as required.63ADP MCB C Series
167	6 A to 32 A rating, SP MCB, \\"C\\" curve, 10 KA breaking capacity
168	SITC of MAIN PANEL with 63 A 4P MCCB 25 KA -1 No as incomer,5 Nos 63A FP MCB 10KA, 2 Nos 32 DP MCB with E.C Busbars . With 7 nos Energy Meter Chamber)
169	Service connection charges for single phase supply to each of qtr
170	Supplying of following size PVC insulated and PVC sheathed / XLPE power cable of 1.1 kV grade of etc. as required. 50 Sqmm 3 &1/2 Core
171	Laying of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 kV grade of following size direct in ground including excavation, sand cushioning, protective covering and refilling the trench etc. as required.ii)Above 35 sq. mm and upto 95 sq. mm
172	Earthing with copper earth plate 600 mm x 600mm x 3.15 mm thick ISI marked including accessories and providing masonary with cover plate having loccking arrangement and watering pipe etc (But wih out charcoal and salt) as required.
173	Supplying and laying 25 mm x 5 mm copper strip on surface or in recess for connection etc as required.
174	SOLAR LIGHTS:-Supply and fixing of 40 W AIO Solar street lights (Hybrid) having 100 Wp or more Mono Crystalline Panel, 36 Ah or more LiFePO4 battery, PIR. Sensor to provide minimum 2 days (24 hours) or more back up, MPPT charge controller complete with all accessories and tiltable mounting bracket suitable to mount it on the top of the pole directly. The Luminaire housing must be of extruded alluminium having IP 65 protection, IK 07 as per test report of third party NABL lab. The Initial lumen output of the AIO street light must be > 6400 lumen (As per LM 79 report of third party NABL lab) and CCT should be 6000k (+/-500K). The solar light to be suppllied along with Hybrid charger suitable .The luminaire should have the proper BMS system and 5 years complete system warranty is to be provided by the lighting company. The luminaire & solar Panl must manufactured in India.( Imported AIO street lights are not acceptable) Make: Philips/ Panasonic/ Havells/Bajaj/Eq make
175	FIRE EXTINGUISHER:ISI Marked portable fire extinguisher, 4.5 kg CO2 type fire extinguishers complete in all respect including initial fill and wall suspension brackets & shall conform to latest IS 15683make -Safex/Minimax/Cease fire/fireshield
176	Supplying and fixing of Electric Shock Treatment Chart is a visual aid that provides information on how to perform first aid in case of an electric shock
177	Floor rubber mat 6'x4' x 6mm
178	SITC of High Pulse Voltage OPR 60/ESE -60 Early Streamer Emission (ESE) with radius of protection of 79 mtr in level - 1 accordance to NFC-17-102 standard. Air termination shall be of the type that response dynamically to the appearance of Light conductor should deliver a unique gain time in efficiemncy anticipating the natural formation of an upward leader that propagates rapidily to capture the lighting sthroke and conductor it wards the ground mak :ABB/Stor4MKING-2CT8899800R7100/paratonex/Allywell/ISGGlobal/Liva/Orbital or approved by Govt of Odisha)
179	Supply and fixing of Air Terminal: Support mast of 5 mtrs height for mounting of OPR 60/ESE30 with guy wire and base plate Make : ABB/Stor4MKING-2CT8899800R7100/paratonex or approved by Govt of Odisha.
180	Supply and installation Lighting striker Recorder ( L.S.R) of Australian make LSR it should be non electronic non resettable type having 7 digits display and enclosed in an IP67 encloser with minimum sensitively of 1000A and maximum capacity of 220KA tested on 8/20 micro second wave from as per IEC 60-1:1989. It should be non electronic type and does not require external power supply for working model LSR Make : ABB/Stor4MKING-2CT8899800R7100/paratonex or approved by Govt of Odisha.
181	S/F of Chemical earthing with 2.4 mtrs copper bonded rod and 50 kG Chemical compound including supply and installation of Earthing chamber work and Highcover as per 4 I:E rules ( CPRI Certficate for S.C Current)
182	S/F of clamp for fixing of copper bonded rod in earthing
183	Supply of down conductor 70 Sqmm single core insulated flexible copper cable with necessary accessories etc.
184	UPVC pipe 40 mm dia and other all accessories.
185	PH Work
186	Supplying all materials, labour, T&P and providing and fixing to wall or ceiling and floor c-pvc pipes and pipe fittings of the following nominal bore with clamps including making good the wall, ceiling and floor all complete as per specification and direction of the Engineer in charge.(Supreme/Ashirvad/Oriplast)
187	In Ground Floor - 32mm dia U-PVC pipe
188	In 1st. floor = 20mm dia C-PVC pipes
189	25mm dia UPVC ASTM-D pipes
190	32mm dia UPVC ASTM-D pipes
191	40mm dia UPVC ASTM-D pipes
192	In 2nd. floor = 20mm dia C-PVC pipes
193	25mm dia UPVC ASTM-D pipes
194	32mm dia UPVC ASTM-D pipes
195	40mm dia UPVC ASTM-D pipes
196	In 3rd. floor = 20mm dia C-PVC pipes
197	25mm dia UPVC ASTM-D pipes
198	32mm dia UPVC ASTM-D pipes
199	In 4rd. floor = 40mm dia UPVC ASTM-D pipes
200	50mm dia UPVC ASTM-D pipes
201	Supplying all materials, labour, T&P and cutting holes through existing brick work including making good the damages in cement mortar (1:4) for taking GI pipes and fittings/ PVC pipes and fittings etc all complete as per PH specification and direction of the Engineer in charge. 250mm thick wall In 1st. Floor
202	In 2nd. Floor - 250mm thick wall
203	In 3rd. Floor - 250mm thick wall
204	Supplying all materials, labour, T&P and cutting hole in R.C.C floors, roofs, etc upto 19 cm thick for passing G.I. Pipes / P.V.C pipes and fittings etc and repairing the holes after insertion of pipes etc with cement concrete (1:2:4) including finishing complete so as to make it leak proof as per direction of the Engineer in charge. In 1st. Floor
205	In 2nd. Floor
206	In 3rd. Floor
207	Supplying all materials, labour, T&P and cutting holes through existing brick or laterite masonry wall for taking HCI pipes and fittings including making good the damages etc all complete as per PH specification and direction of the Engineer in charge. 250mm to 375mm thick wall.
208	Supplying all materials, labour, T&P and cutting grooves in pucca floors and walls for taking GI/ PVC pipes and making good the damages as per the direction of the Engineer in charge. In 1st. Floor
209	In 2nd. Floor
210	In 3rd. Floor
211	Supplying all materials, labour, T&P and fitting and fixing brass/CP fittings of the following nominal bore with supply of all jointing materials complete as per specification and direction of the Engineer in charge. 15mm dia CP Short body Bib cock (Plaza/Aquatic/Amber)
212	15mm dia CP Long body Bib cock (Plaza/Aquatic/Amber)
213	15mm dia CP Pillar cock (Plaza/Aquatic/Amber)
214	15mm dia CP Angle stop cock (Plaza/Aquatic/Amber)
215	15mm dia CP Two way Bib cock (Plaza/Aquatic/Amber)
216	15mm dia CP Sink cock (Plaza/Aquatic/Amber)
217	20mm dia CP Concealed Stop cock (Plaza/Aquatic/Amber)
218	15mm dia CP Health Faucet (Plaza/Aquatic/Amber)
219	25mm CPVC Ball Valve
220	32mm CPVC Ball Valve
221	40mm CPVC Ball Valve
222	50mm CPVC Ball Valve
223	15mm dia CP Flange
224	15mm dia CP Extension Piece
225	125mm dia CP Gratting
226	Supplying all materials, labour, T&P and fitting and fixing 10 litres capacity low level flushing cistern with a pair of cast iron or M.S brackets complete with fittings such as siphonic arrangements 15mm nominal size brass/pvc ball valve with polythene float CP brass handle, unions and couplings for connection with inlet, outlet and overflow pipes,32mm dia CP flush bend,15mm dia pvc inlet connection pipe including cutting holes and making good the same and connecting the flush bend with cistern and closet and connecting the inlet pipe with supply main etc all complete as per specification and direction of the Engineer in charge. 10 litres capacity pvc low level cistern (Slimline-white)
227	Supplying all materials, labour, T&P and fixing Wash Down Water Closet (European type W.C pan) with integral ‘S’ or ‘P’ trap to the floor with wooden plug and chromium plated screws including jointing the trap with soil pipe in cement mortar (1:1) etc all complete as per specification and direction of the Engineer in charge. EWC 'S' trap plain (Parryware/Hindware/Neycer)
228	Supplying all materials, labour, T&P and fixing water closet, squatting pan (Indian type W.C pan / Orissa pattern squatting pan) duly embedded in cement concrete (1:5:10) using 4cm size hard granite metal all complete as per specification and direction of the Engineer in charge. 580mmx440mm size Orissa pan (Parryware/Hindware/Neycer)
229	Supplying all materials, labour, T&P and fitting & fixing stainless steel AISI 304 (18/8) Library/Kitchen sink with drain board as per IS 13983 with cast iron or M S brackets painted white including cutting holes in walls and making good the damages etc all complete as per specification and direction of the Engineer in charge. 600x450x250 mm stainless steel kitchen sink (Parrywere /Hindware /Somany /Cera /Kerovit)
230	Supplying all materials, labour, T&P and fixing of wash hand basins with pedestal complete recessed at the back for the reception of pipes and fittings with hole for pillar taps with cast iron or M S brackets painted white including cutting holes in walls and making good the damages etc all complete as per specification and direction of the Engineer in charge. 550mmx400mm size Wash hand basin with Porcelain Pedestal (Parryware/Hindware/Neycer)
231	Supplying all materials, labour, T&P and fitting and fixing U-PVC SWR soil waste ventilating pipes and fittings of the following outside diameter conforming to ISI No. 13592/1992 to walls with nails, bobbins and wooden plugs or laying in trenches including jointing with supply of approved rubber lubricant by non-heat application method/as per manufacturer’s specification, testing, earthwork in excavation in all kinds of soil and refilling of trenches as per specification and direction of the Engineer in charge. 110mm dia U-PVC SWR pipes(Supreme/Ashirvad/Oriplast)
232	110mm U-PVC door Tee
233	110mm U-PVC door bend
234	110mm U-PVC plain bend
235	110mm dia UPVC 'Y' Bend
236	110mm U-PVC H/R Bend
237	110mm dia U-PVC 'P' trap
238	110mm dia U-PVC cowl
239	110mm dia U-PVC clamp
240	75mm dia U-PVC Pipe
241	75mm U-PVC door bend
242	75mm U-PVC plain bend
243	Supplying all materials, labour, T&P and fixing mirror of superior glass mounted on 6mm thick A.C sheet or plywood sheet and fixed to wooden plugs with CP screws and washers complete as per specification an direction of the Engineer in charge. 600mmx450mm size B.E mirror
244	Supplying all materials, labour, T&P and fixing standard size glass-shelf with CP brass brackets and guard rails complete fixed to wooden plugs with CP screws as per specification and direction of the Engineer in charge. 600mmx125mm glass shelf with CP/NP guard rails
245	Supplying all materials,labour, T&P and fixing standard sized CP towel rail complete with CP brass brackets fixed to wooden plugs with CP screws as per specification and direction of the Engineer in charge. CP Towel Ring Round
246	25mm x 600mm long CP towel rail
247	Supplying all materials, labour, T&P and fixing CP soap holder complete with CP brass brackets fixed to wooden plugs with CP screws as per specification and direction of the Engineer in charge. CP Soap Holder
248	Supplying all materials, labour, T&P and providing Ceramic tiles in floors, treads and landing on 25mm thick bed of cement mortar 1:1 (1 cement:1 sand) joined with neat cement slurry mixed with pigment to match the shades of the tiles including rubbing and polishing complete. Size 30cmx30cm (Kajaria / Somany / Johnson) to be pre-approved by the Engineer in charge.
249	In 1st. Floor
250	In 2nd. Floor
251	In 3rd. Floor
252	Supplying all materials, labour, T&P and fixing Porcelain glazed tiles in dados skirting on 12mm thick cement plaster (1:3) jointed with neat cement slurry mixed with pigments to match the shades of the tiles including rubbing and polishing complete. Size 45cmx30cm (Kajaria / Somany / Johnson) plain/printed to be pre-approved by the Engineer in charge.
253	In 1st. Floor = 8x(2.40+1.90)x2.10 =
254	In 2nd. Floor = 8x(2.40+1.90)x2.10 =
255	In 3rd. Floor = 8x(2.40+1.90)x2.10 =
256	Supplying all materials, labour, T&P and providing 12mm thick cement plaster (1:4) on brickwork including watering, curing, conveyance of all materials to worksite, payment of royalty, taxes etc all complete as per specification and direction of the Engineer in charge.
257	In 1st. Floor = Measurement same as above tiles in dado
258	In 2nd. Floor = Measurement same as above tiles in dado
259	In 3rd. Floor = Measurement same as above tiles in dado
260	Supplying all materials, labour, T&P and providing cement concrete (1:2:4) with 12mm size hard broken granite chipsincluding watering, curing, conveyance of all materials to worksite, payment of royalty, taxes etc all complete as per specification and direction of the Engineer in charge.
261	In 1st. Floor = 18.99x0.05 =
262	In 2nd. Floor = 18.99x0.05 =
263	In 3rd. Floor = 18.99x0.05 =
264	Factory made single leaf Solid WPC (Wood polymer) composite door shutter of 25mm thickcompacted with wood grain finish structural foam panel of 29mm thickness and a density of 20kg/cu.mtr shall be used as core material for fitting the metal fittings such as tower bolts, aldrops, handles etc shall be provided. A structural adhesive compatible with (EPS) foam shall be used for bending the core material, The material and process for manufacturing the door shutters shall conform to RV-TIFAC composites Design Centre's standards and specifications and the door shutters Conforming to relevant I.S.specification. The finish of door shutter will be plain colour white/ Ivory/ Beige/ Light grey/ Mahogany/ Teak wood or any other colour using high quality pigments. Three heavy whight mild steel butt hinges type-I(ISI marked) size 100mm are to be fitted on one side of shutter.
265	12x0.75x2.10 =
266	Factory made Solid WPC door frame of size 95mmx55mm fabricated. The door frame consist of four segments which are provided with plug-in-socket arrangement in-situ in the mould. The segments are plugged in and are joined together by means of screw. The WPC frame shall be provided with The material and process for manufacturing the door frames shall conform to Relavent I.S.specification. The finish of door frame will be plain colour white/ Ivory/ Beige/ Light grey/ Golden brown/Mahogany/ Teak wood/sand stone/Champagne/Pastel blue or any other colour using high quality pigments complete in all respect as per specification and direction of the Engineer in charge
267	12x4.95 =
268	Supplying all materials,labour,T&P and fixing Rotational moulded polyethylene cylindrical vertical water storage tanks including cutting holes through the tank and fixing mild steel tubes and fittings and providing extra sockets and jam nuts, fixing ball valve etc, including hoisting upto a height of 5 metres above ground level and placing the tank to the required position and providing 1st class K.B brickwork in cement mortar (1:6) of 0.46m height in staging and in circular protection wall to support the tank, 12mm thick cement plaster (1:6) over brickwork, R.C.C slab of size 1.60mx1.60m and 0.10m thick, R.C.C beam of 0.25mx0.30m and 3.18m average length in cement concrete(1:2:4) using 12mm size h.g chips including centering and shuttering, watering, curing, conveyance of all materials to worksite etc all complete as per specification and direction of the Engineer in charge. 1000 Ltr. PVC water storage tank (3 Layer White)-on 4th. Floor
269	Supplying all materials, labour, T&P and constructing gully trap chamber of the following inside size with 8cm thick R.C.C precast cover slab in cement concrete (1:1.5:3) mix using 12mm size h.g chips, foundation concrete (1:4:8) using 40mm size hard granite metal on bed and around trap, fly ash bricks in cement mortar (1:6) in F&P and inside 12mm thick cement plastering (1:3) finished with a floating coat of neat cement including fixing 100mmx100mm size HCI/P-trap gully trap,150mmx150mm size CI grating etc all complete as per approved drawing, specification and direction of the Engineer in charge. Inside size 250mmx250mm
270	Supplying all materials, labour, T&P and constructing inspection chamber of the following size with cement concrete(1:3:6) using 40mm size hard granite metal on bed, 1st class Fly ash brickwork in cement mortar(1:6), moulding and shaping the channel inside and benching with cement concrete (1:2:4) using 12mm size h.g chips, 12mmthick cement plaster (1:3) with punning to inside, cement flush pointing (1:3) to outside, RCC cover slab in (1:2:4) using 12mm size h.g chips with RCC man hole cover, earthwork in excavation in all kinds of soil and refilling the cavity around the chamber including watering, curing, conveyance of all materials to worksite, payment of royalty, taxes etc all complete as per approved specification and direction of the Engineer in charge. Inside size 760mmx760mmx460mm
271	RCPC Cover (18\\" round)
272	Supplying all materials, labour, T&P and constructing man hole chamber of the following size with cement concrete(1:3:6) using 40mm size hard granite metal on bed, 1st class K.B brickwork in cement mortar(1:6), moulding and shaping the channel inside and benching with cement concrete (1:2:4) using 12mm size h.g chips,12mmthick cement plaster (1:3) with punning to inside, cement flush pointing (1:3) to outside, R.C.C cover slab in (1:2:4) using 12mm size h.g chips with RCC man hole cover, earthwork in excavation in all kinds of soil and refilling the cavity around the chamber including watering, curing, conveyance of all materials to worksite, payment of royalty, taxes etc all complete as per approved specification and direction of the Engineer in charge. Inside size 910mmx910mmx910mm
273	RCPC Cover (24\\" round)
274	Supplying all materials, labour, T&P and constructing soakway pit of the following size with dry brick walling from bottom upto invert of inlet pipe and 1st class K.B brickwork in cement mortar (1:6) for the remaining height at top, cement concrete (1:4:8) using 40mm size hg chips on bed, 12mm thick cement plaster (1:4) inside and outside over masonry brickwork, gravel backing in the rear of well steining, RCC cover slab in cement concrete (1:2:4) using 12mm size hg chips fitted with iron lifting handles including earthwork in open well excavation in all kinds of soil and refilling of cavity around the pit & painting the iron works, watering, curing, conveyance of all materials to worksite, payment of royalty, taxes etc all complete as per approved specification and direction of the Engineer in charge. Brick masonry soakway pit 1.80m diax2.60m deep
275	Supplying all materials, labour, T&P and laying in trenches (to level or slope) unplasticized PVC pipes conforming to IS: 4985/2000 of the following outside dia for class–3(0.60mpa) including jointing with supply of approved solvent cement by non-heat application method/as per manufacturer’s specification, providing and laying in trench cement concrete (1:4:8) with 40mm size hard granite metal in the Type C-1 standard bedding surrounding or encasing including concrete for bedding and curing etc all complete as per PH specification and direction of the Engineer in charge. 110mm dia u-pvc pipe alround concrete
276	160mm dia u-pvc pipe alround concrete
277	Supplying the waterproofing material Pidifin 2K of Dr.fixit on equivalent water proofing material and appling in two coat over the concrete floor and dado upto 1\\"-6\\" in wall including cleaning,applying and mending as per specification including all labour charges as per direction of Engineer-in-charge.
278	In.first floor
279	In.second floor
280	In.third floor
281	Sinking of 200mmx150mm dia Tube well through DTH Rig.
282	Labour for drilling a perfectly vertical bore hole of specified dia for a specified depth below ground level through consolidated and unconsolidated rock with down the hole hammer drilling rig or combination rig as required to suit the site condition as per the direction of the Engineer in charge including use of own rig with its accessories, tools and plant and consumables etc for lowering of 200mm/150mm dia G.I/P.V.C/M.S casing pipes for housing fitted with socket and with or without well screen as per the necessity for soft, medium, hard and boulder formation (G.I/P.V.C/M.S casing pipes if required to prevent collapse of overburden is to be provided by the contractor including lowering and withdrawing after completion of the tube well), 200mm dia to 400mm dia in overburden portion including packing of gravel supplied by the contractor for 400mm dia bore only
283	Drilling of 200mm dia bore = 00mtr to 45mtr
284	150mm dia 45mtr to 150mtr
285	Lowering the following size of G.I/P.V.C/M.S housing pipes with or without slotted pipes as per the necessity from ground level up to 45.00m depth and fitted and fixed up in perfectly vertical position including cutting and threading of pipes and slotted pipes and supplying and fixing all jointing materials, tools and plant etc all complete and keeping the top of casing pipe threaded including plugging tube wells to prevent entry of foreign materials.
286	Lowering of 150mm dia PVC casing pipes = 0 mtr to 45 mtrs
287	Cost of 200mm dia PVC ASTM (Sch-80) pipe
288	Cleaning and developing the tube well with supply of compressor worked till clear and adequate discharge is obtained from the tube well including supply and use of all necessary equipment and labour as per direction of the Engineer in charge
289	By DTH/Rotary Rig
290	Supplying all materials and labour,tools and plant and providing sanitary sealing by cement concrete grouting of annular space around GI/PVC/MS housing pipe upto 5 mtrs below ground level(as per drawing)to plug the bore hole excluding cost of cement all complete as per direction of the Engineer in charge. Minimum one metre of casing pipe to be inserted in the bore into the rock the bottom to ensure sanitary sealing(excluding cost of cement which willbe supplied by the Department).
291	Sanitary sealing upto 5mtrs below ground level.
292	C.C(1:2:4)
293	Supply all materials, labour, T&P and providing,fitting and fixing submersible pump with squirrel cage induction type submersible type submersible electric motor to run on 3 phase/1phase line voltage ranging from 320 volt to 450 volt conforming to IS:8034/89 with following specifications with suitable control pannel, jointing with GI/PVC/HDPE pipes electrification, testing, commissioning, trial running, conveyance of all materials to worksite, payment of taxes etc all complete as per specification and direction of the Engineer in charge.
294	1.00 HP three phase 3 stage head range 30 to 54 metres, discharge 155 to 110 L.P.M with outlet dia of 32mm Submersible Pump & Motor.
295	DOL control panel
296	2.50sqmm cable
297	32mm dia steel short piece
298	50mm size CI bracket
299	Well Cap
300	Steel rope with cover
301	32mm dia HDPE Pipe
302	20mm UPVC (Sch-80) pipe
303	Labour charges for lowering of submesible pumpset with pipes and cables etc. with testing and commissioning at site.
304	For installation
305	Protection Chamber
306	Supplying all materials, labour, T&P and constructing Bore well protection chamber of the inside size 650x650x1000hight with cement concrete (1:3:6) using 40mm size hard granite metal on foundation, 1st class Fly ash brickwork in cement mortar (1:3), with base cement concrete (1:2:4) using 12mm size h.g chips,12mmthick cement plaster (1:4) inside and outside, R.C.C cover slab in (1:1.5:3) using 12mm size h.g chips, earthwork in excavation in all kinds of soil and refilling the cavity around the chamber including watering, curing, conveyance of all materials to worksite, payment of royalty, taxes etc all complete as per approved specification and direction of the Engineer in charge.
307	Construction of 50 users RCC septic tank-1 No
308	Earth work in excavation of foundation in all kinds of soil within 50m initial lead and 1.5m initial lift including rough dressing & breaking clods to maximum 5cm to 7cm and laying in layers not exceeding 0.30m in depth and as per direction of the Engineer-in-Charge.
309	Extra lifts of 1.50 mtr or part thereof over the initial lift of 1.5 mtr in all kinds of embankments and road works and ordinary earthwork in general. 1x6.10x2.70x0.30
310	Excavation of foundation in laterite rock or any hard rock (other than granite or disintegrated rock) removed by chiselling including dressing and levelling the bed not exceeding 1.50 mtr. in depth and depositing the soil within initial lead of 50 mtr. and as per specification approved by the Department.
311	Supplying all materials, labour, T&P and filling in foundation and plinth with sand well watered and rammed including conveyance of all materials to worksite, payment of royalty, taxes etc.all complete as per direction of the Engineer in charge.
312	Supplying all materials, labour, T&P and providing cement concrete (1:3:6) with 4cm size hard granite metal including watering, curing, conveyance of all materials to worksite, payment of royalty, taxes etc all complete as per specification and direction of the Engineer in charge
313	Supplying all materials, labour, T&P and providing 6mm thick cement plaster (1:4) on RCC work including watering, curing, conveyance of all materials to worksite, payment of royalty, taxes etc all complete as per specification and direction of the Engineer in charge
314	Supplying all materials, labour, T&P and providing cement punning including watering, curing, conveyance of all materials to worksite, payment of royalty, taxes etc all complete as per specification and direction of the Engineer in charge
315	Supplying all materials, labour, T&P and providing rigid and smooth centering and shuttering for R.C.C works including false work and dismantling them after casting including conveyance of all materials to worksite, payment of royalty, taxes etc all complete as per specification and direction of the Engineer in charge
316	R.C.C floor and roof slabs up to 4.30m height
317	R.C.C beams,columns,girder and bressmer etc.
318	Supplying all materials, labour, T&P and providing M.S reinforcement for R.C.C work including cutting, bending, binding, and tying the grills and placing in position including cost of binding wire 18 to 20 gauge, conveyance of all materials to worksite, payment of royalty, taxes etc all complete as per specification and direction of the Engineer in charge
319	Supplying all materials, labour, T&P and providing cement concrete (1:1.5:3) with 12mm size hard broken granite chips for R.C.C works including hoisting, laying, watering, curing, conveyance of all materials to worksite, payment of royalty, taxes etc all complete as per specification and direction of the Engineer in charge
320	Supplying all materials, labour, T&P and providing cement concrete (1:2:4) with 12mm size hard broken granite chips including watering, curing, conveyance of all materials to worksite, payment of royalty, taxes etc all complete as per specification and direction of the Engineer in charge
321	Supplying all materials, labour, T&P and providing 12mm thick cement plaster (1:4) on brickwork including watering, curing, conveyance of all materials to worksite, payment of royalty, taxes etc all complete as per specification and direction of the Engineer in charge
322	Supplying all materials, labour, T&P and providing brick work with Fly ash bricks having crushing strength not less than 75kg/cm² with dimensional tolerance ± 8 percent in cement mortar (1:4) including watering, curing, conveyance of all materials to worksite, payment of royalty, taxes etc all complete as per specification and direction of the Engineer in charge
323	In F&P
324	Supplying all materials, labour, T&P and making MS step iron in 20mm diameter MS steel bars and fixing into walls of man hole/septic tank duly embedded in cement concrete (1:3:6) complete as per specification and direction of the Engineer in charge.
325	Filling in foundation and plinth with excavated materials, moorum including watering and ramming as directed by the Engineer in charge
326	Supplying all materials, labour,T&P and providing 25mm thick grading concrete (1:2:2) on roof slab with 6mm size hard granite chips on new work including watering, curing, conveyance of all materials to worksite, payment of royalty, taxes etc all complete as per specification and direction of the Engineer in charge
327	Supplying all materials, labour, T&P and providing shoring and shuttering foundation trenches, pits etc with close wooden planks or sheets shuttering etc all complete as per direction of the Engineer in charge.
328	Dewatering with 5 H.P diesel engine pump during excavation
329	Supplying all materials, labour, T&P and fitting and fixing S.W.Tee of size 150mx150mx150m as per P.H.D.specification and direction of the E.I.C.
330	Supplying all materials, labour, T&P and constructing vent base as per P.H.D specification etc all complete.
331	Supplying all materials, labour, T&P and fitting and fixing U-PVC SWR soil waste ventilating pipes and fittings of the following outside diameter conforming to ISI No 13592/1992 to walls with nails, bobbins and wooden plugs or laying in trenches including jointing with supply of approved rubber lubricant by non-heat application method/as per manufacturer's specification, testing, earthwork in excavation in all kinds of soil and refilling of trenches as per specification and direction of the engineer in charge.
332	110mm diameter U-PVC SWR pipes(Supreme/Ashirvad)
333	110mm U-PVC cowl Please Enable Macros to View BoQ information

Tender Documents

SR No	FileName	File Description
1	Click here to download tender document	Tender Documents
2	Click here to download tender document	Tender Documents
3	Click here to download tender document	Tender Documents
4	Click here to download tender document	Tender Documents

Also Visit

Tenders

Odisha Tenders

Construction Tenders

Building Construction Tenders

Building Work Tenders

Disclaimer

We takes all possible care for accurate & authentic tender information, however Users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender.

Top

Tender For Construction Of D-Type Staff Qtrs For Government Polytechnic School For The Year 2025-26, Nayagarh-Odisha

Tender Documents

Disclaimer

About Us

Services

Browse Tenders

For Sales Inquiry

Tender For Construction Of D-Type Staff Qtrs For Government Polytechnic School For The Year 2025-26, Nayagarh-Odisha

Tender Documents

Disclaimer

OTP Verification

About Us

Services

Browse Tenders

For Sales Inquiry

Connect With Us