|
| 1 | PVC INSULATED FR COPPER CONDUCTOR CABLES:Supply and erection of PVC insulated FR single core Unsheathed copper conductor cable (ISI marked) suitable upto 1100 volts grade confirm to IS:694/1990 left bare in pipe or casing of suitable size complete in all respect as desired by the Engineer-in-charge:- |
| 2 | Overall size 1.5sq.mm (Un-sheathed) |
| 3 | Overall size 2.5sq.mm (Un-sheathed) |
| 4 | COPPER CONDUCTOR CABLES FOR SPECIAL ELECTRICAL SERVICES:Supply and erection of fire survival cable for fire alarm & PA system with annealed stranded copper conductor, fire resistant mica tape wrapped (at 950°C for 180 minutes), XLPE insulated, LSHZ (low smoke & zero halogen) bedding, LSZH (low smoke & zero halogen) red outer sheath, galvanized steel wire armour, 600/1000 volts grade, Fire resistant to IEC 331 & BS7846 F2/BS6387 & CWZ, Acid gas emission to BS EN 50267 (IEC60754), smoke emission to BS EN 50268 (IEC61034) and flame propagation to BS EN 50265, BS EN 50266 (IEC 60332-3) left bare in pipe or casing or on surface with cleats of suitable size complete in all respect as desired by the Engineer-in-charge:- |
| 5 | Fire Survival cable 2Core x 1.5 sq.mm |
| 6 | PVC, HDPE PIPES & PVC FLEXIBLE PIPES:Supply & erection of PVC Conduit Pipes (ISI marked) as per IS9537:Part-III & HDPE pipes (ISI marked) as per IS:4984:1995 for wiring purposes including bends, junction boxes, Steel hooks, M.S. saddle clamps and other petty materials etc., as per PWD General Specifications:- |
| 7 | Heavy Gauge PVC Conduit Pipe 25mm dia. (On Surface) |
| 8 | MINIATURE CIRCUIT BREAKERS:Supply and erection of Miniature Circuit Breaker MCB's for circuit protection against overload and short circuit current fault suitable for 240/ 415 volts 50cycles AC supply with breaking capacity of 10kA, Curve-C and low watt losses as per IS/IEC 60898-1, energy limitation class-3, true contact indication, label holder facility in the existing MCB distribution board as per PWD General Specifications including connections with suitable size of thimbles/lugs:- |
| 9 | MCB Double Pole 6-32amp. (10kA, Curve-C) |
| 10 | SHEET METAL DOUBLE DOOR DISTRIBUTION BOARD FOR MCB's/ RCBO's/ RCCB's:Supply and erection of sheet metal Double Door Distribution Boards IP 43-IK09 metal door (dust protected) as per IS 8623-1&3, IEC 61439-1&3 suitable for flush mounting with fully insulated copper busbars, shrouded neutral bars, earth bars, cement spill protector, color-coded interconnecting wire set, cable ties, blanking plates and circuit identifications label and of required no. of ways for mounting miniature circuit breakers/ RCBO's/ RCCB's in the distribution board (For SP&N distribution board with provision DP MCB's/ RCCB's/ RCBO's as incomer and SP MCB's as outgoings and for TP&N horizontal distribution board with provision TPN/ FP MCB's/ RCCB's/ RCBO's as incomer and SP MCB's as outgoings) as per PWD General specifications including connections with suitable size of thimbles and bonding to existing earth etc:- |
| 11 | SP&N Double Door Distribution Board 4 way each |
| 12 | Supply of 2 loop networkable, analogue addressable fire alarm control panel Support for up to min. 250 Devices per loop analog addressable loops Having 1) Front LED Display: 6x40 character (240x64 pixels) blue liquid crystal display/with backlight illumination,/ a large 4 line by 20 character alphanumeric LCD display shows programmed device point information./ 8X18 characters LCD screen 15 LEDs to display important information 2) Control Keys: Evacuate, Silence/Resound, Mute Buzzer, Extend Delay, System Reset, Show Alarm Zones, Programming Keys: 12 button alpha numeric key pad inc cancel and return keys plus 4 navigation keys and an OK key, Programming Keys: 2 independent programmable function keys and LED indicators, Indicators: Fire, Fault, Disablement, Test, Buzzer Muted, Delayed Mode, Sounders Silenced, Sounders Disabled and Power. Also dedicated fault LEDs for System Fault, Sounder Fault, Supply Fault and Earth Fault. 40, 80 or 160 LED fire zone indicators optional./ Drill, Reset, Silence, and Acknowledge Alphanumeric Keypad: 12 alphanumeric keys, escape, enter, and navigation buttons (left, right, up, down) 3) PANEL FEATURES: Disable all relays, Optional 40, 80 or 160 zone alarm LEDs, Easy 5 key-press set-up, Large blue LCD display, Supports USB upload/download, Alpha-numeric style keypad and navigation keys, Option to upload a company logo, 160 zone compact mimic support, Panel buzzer 'mute' in engineering mode, Up to 72 hour standby, 3 min Inhibit Timer function, Printer support, Remote LED Support, Level -3 configurable Passcode support, Sounder Synchronization, Fire Transmission & Keysafe Support, Fire Transmission LED Support, Front panel programming provides an auto learn function, allowing the installer to configure the system quickly and easily in default mode 4) SOFTWARE FEATURES, PC configuration software (supplied with panel), 80 fire zones (can be used with or without LEDs), 7 day timers, Event logging, the programming is carried out by means of a browser based user interface, Onboard diagnostics, Class change function, Coincidence and verification detection for false alarm management, Sensitivity adjustment e.g. between day and night, Input/output logic, Enhanced zone support up to 160 LEDs, Alternative zone referencing scheme, Programming optional language support, Event Logic support, Remote LED Event Logic HARDWARE FEATURES, Non-Volatile memory ensures no loss of data even if power supply is accidentally removed/ Battery backed real-time clock (2 & 4 loop), 2 independent sounder circuits, 500mA loop driver 2 x onboard monitored inputs, Optional programmable key switch for selected functions, Plug-in connectors Output Relays: Fire relay: Single pole changeover 24V DC 1A Extended: Single pole changeover 24V DC 1A Aux relay: Programmable single pole changeover 24V DC 1A Onboard Data Ports: 1 x RS485 (Repeater connection) 1 x PC Programming Port4 Optional Ports: RS232 third party protocol interface Sounder Circuits: 2 output circuits, 1A per circuit.1 DIMENSIONS [MM] (H X W X D): 391.5 x 390 x 147,/ 406(W) X 666(H) X 130(D) mm2/22.7 in. x 14.5 in. x 4.3 in. (57.7 cm x 36.8 cm x 10.9 cm) WEIGHT (EXCLUDING BATTERIES):4.5kg, COLOUR: RAL 9002 Grey white, Red, 1,87,500-00 EACH 7) Interfaces RS232 interface enables communication with PC RS485 or CAN interface enables networking PSTN/DACT: 2 lines, RJ45 Ethernet: 1 x RJ45 Power supply (primary) Current: 120 VAC: 2 A maximum 240 VAC: 1 A maximum Voltage: 100-120 VAC,50/60 Hz or 240 VAC, 50 Hz Batteries Voltage: 2 x 12 VDC in series • Capacities: maximum 40 Ah in cabinet: 7 Ah to 18 Ah. in additional battery box: 24 Ah to 40 Ah Fuses: 15 A blade typeMOUNTING HOLES: 3, KNOCKOUTS (20MM): Top: 25xBottom: 4x, OPERATING TEMPERATURE:0°C to +40°C, RELATIVE HUMIDITY:) 5% 95% non-condensing IP30 (EN6059), MATERIAL: Mild steel sheet rear Enclosure. All displays and controls are carried on the enclosure door. OPERATING VOLTAGE: 110/230V AC +/-15%, PSU RATING: 24V DC 4Aa, STAND-BY BATTERIES 3: 2 x 17Ah, STAND-BY BATTERY DURATION (BASED ON APOLLO DEVICES) :Stand alone: 72 hours With network card or repeater connected: 48 hours, AUXILLIARY OUTPUT1: +24V DC 250mA fused. All equipment and systems shall be tested and approved by LPCB/UL/FM/relevant IS/EN VDN Standard. The Work should complete in all respect and as desired by Engineer-in-charge |
| 13 | Supply of Manual call point (MCP) having FEATURES & BENEFITS: Unique ‘Plug & Play’ installation concept, Analogue addressable communications, Fully compliant with EN54, Part 11, Integral LED Dimensions Surface mounting : 89 x 93 x 59.5 (WxHxD)/ 87.1mm×87.1mm×58.5mm/87 mm x 87 mm x 56 mm, Weight: 110-160g, with Back Box IP Rating: IP24D/IP43/IP54, Indicator Red. Flashes every 3s normally. Steadily Illuminates after alarming. Type of Initiating Part Reusable Initiating Mode Pressing the frangible element manually Resuming Mode Manually resumed by a special key Programming Mode Electronically addressed Address Range Occupying one address selectableOperating Temperature-25℃～+70℃, Relative Humidity: 10% - 96% no condensing Operating Voltage:15V to 33Vdc max, Current: 1.8mA-0.26Ma. All equipment and systems shall be tested and approved by LPCB/UL/FM/relevant IS/EN/ VDS Standard The Work should complete in all respect and as desired by Engineer-in-charge of work at site. |
| 14 | Supply of Addressable photoelectric smoke detector that uses the Advanced Protocol (AP) for communication. Key Specifications should be as follows: Type: Addressable Photoelectric Smoke Detector, Material: PC/ABS Plastic, Diameter: 102-120mm with base approx Height: 52-63.50mm approx, Weight: 97-110g (including base),Operating Voltage Range:15-33VDC, Current: 0.55 -3.5mA at 24V, , Temperature Range: -30°C to +70°C, Humidity:10to93%relative humidity (non-condensing),MaxWire Gauge for Terminals: 2.5mm², Color: White, Communication: Advanced Protocol(AP), Compatibility: Mechanically and electrically compatible with existing devices, electronically addressed, Base: Designed to be installed in the suitable base, The detector is environmentally friendly, meeting WEEE and RoHS requirements. All equipment and systems shall be tested and approved by LPCB/UL/FM/relevant IS/EN VDS Standard. The Work should complete in all respect and as desired by Engineer-in-charge of work at site. |
| 15 | Supply of Addressable rate-of-rise (ROR) heat detector that utilizes the Advanced Protocol(AP),Keys specifications Key Specifications should be as follows: Type: Addressable Photoelectric Smoke Detector, Material: PC/ABS Plastic, Diameter: 102-120mm with base approx Height: 52-63.50mm approx, Weight: 97-110g (including base),Operating Voltage Range: 15-33VDC, Current: 0.55 -3.5mA at 24V, , Temperature Range: -30°C to +70°C, Humidity: 10to93%relative humidity (non-condensing),Max Wire Gauge for Terminals: 2.5mm², Color: White, Communication: Advanced Protocol(AP), Compatibility: Mechanically and electrically compatible with existing devices, electronically addressed, Base: Designed to be installed in the suitable base, The detector is environmentally friendly, meeting WEEE and RoHS requirements. All equipment and systems shall be tested and approved by LPCB/UL/FM/relevant IS/EN/VDS Standard. The Work should complete in all respect and as desired by Engineer-in-charge of work at site. |
| 16 | Supply of Addressable, photoelectric smoke detector with a built-in isolator and use the Advanced Protocol(AP)for communication Key Specifications should be as follows: Type: Addressable Photoelectric Smoke Detector, Material: PC/ABS Plastic, Diameter: 102-120mm with base approx Height: 52-63.50mm approx, Weight: 97-110g (including base),Operating Voltage Range:15-33VDC, Current: 0.55 -3.5mA at 24V, , Temperature Range: -30°C to +70°C, Humidity: 10 to 93% relative humidity (non-condensing),Max Wire Gauge for Terminals: 2.5mm², Color: White, Communication: Advanced Protocol(AP), Compatibility: Mechanically and electrically compatible with existing devices, electronically addressed, Base: Designed to be installed in the suitable base, The detector is environmentally friendly, meeting WEEE and RoHS requirements. Enhanced False Alarm Resilience: Sophisticated processing circuitry and embedded software with smoothing filters help reduce false alarms caused by environmental noise and debris, Improved Detection Speed: The detector incorporates complex algorithms for faster detection, 360° Local Indication: Twointegralred LEDs provide visual indication of the device status. All equipment and systems shall be tested and approved by LPCB/UL/FM/relevant IS/EN/VDS Standard. The Work should complete in all respect and as desired by Engineer-in-charge of work at site. |
| 17 | Supply of Wall/Ceiling -mounted, addressable sounder designed for fire alarm systems, Key specifications include as follows:- Type: Wall/Ceiling-mounted, addressable sounder, Voltage: 15-33VDC, Sound Output:77.1-99.7dB(A) at different angles +/-3dB @1metre Max. Current Consumption: 3.5mA /3.85mA/ 11.4mA / 14.7mA, Temperature Range: -25°Cto +85°C, Humidity: Max. 95% relative humidity (non-condensing), Ingress Protection: IP44/IP43/IP33 (with deep base), Approvals: EN54-3, EN54-17,and CPD, Material: ABS plastic, individual tone and volume settings, having tone types from 16-32 nos, sounder tone synchronization, and compatibility with other devices. All equipment and systems shall be tested and approved by LPCB/UL/FM/relevant IS/EN VDS Standard. The Work should complete in all respect and as desired by Engineer-in-charge of work at site. |
| 18 | Supply of SMF (Sealed Maintenance Free) Battery, Capacity 12Volt 7AH, Lead Acid Storage Type including 02 nos terminal gap 02 nos fastener 02 nos terminal protector.The Work should complete in all respect and as desired by Engineer-in-charge of work at site. |
| 19 | Supply of Laser etched LED Light Exit Signage on ceiling/wall mounted (Two sided 25Mtr, One Side English other side Punjabi ) etching on 8mm transparent acrylic sheet (normal size) with extra super bright LED’s in glass Epoxy PCB strip concealed in top mounted suitable size 20 SWG M.S / Aluminium box duly power coated & equipped with necessary circuit to step down from 230V AC to 6V DC with nickel. The Work should complete in all respect and as desired by Engineer-in-charge of work at site. |
| 20 | Supply of of Emergency Exit Light with double LED MS dome mounted on top of light with EXIT mention in front of light and all switches are with soft touch type. Power Consumption of 12 Watt LED/ 70 Watt Halogen. Battery should be Sealed Maintenance free dry battery 7Ah 12V. The work Should Complete in all respects& as desired by the Engineer in charge of work at site. The Work should complete in all respect and as desired by Engineer-in-charge of work at site. |
| 21 | Supply of Wall mount (Cabinet) Speaker, typicallyusedforgeneralpublicaddressapplicationsRatedpower10-12W,Powertaps@100V10W/5W,SPL at 10 W / 1W, ( 200Hz-15kHz, 1m), 102 dB / 92 dB, Frequency range, (-10dB)150Hz-17kHz,Powertaps@70V5W/2.5W,Dispersionangle,(1KHz/-6dB),170°,Ratedimpedance1kΩ/2kΩ,Ratedinput,voltage100 V/70 V, Connector, Dimensions (W×H×D), 240 × 345 × 100 mm, The loudspeaker offers high sound pressure level and wide frequency range, which result in excellent audio and music reproduction. Equipped with high linearity anti-fatigue rubber, the bass audio performance is free from distortion due to a prolonged low-frequency operation. The Work should complete in all respect and as desired by Engineer-in-charge of work at site. |
| 22 | Supply of All in One amplifier 2CH 180W at 8Ω compact Class-D mixer amplifier with Display 2.8-inch LCD, Frequency Response 20Hz - 20kHz, +1/-1dB (RCA Input), 50Hz - 14kHz, +1.5/-3dB (1/4\\" TRS Input), Total Harmonic Distortion (THD) <= 1%, 20Hz - 20kHz Signal to Noise Ratio (below rated power 20 Hz to 20 kHz, A-Weighted) >=85dB (RCA Input), >=75dB (1/4\\" TRS Input) Input Impedance 3.2kΩ, Music Input VOD (RCA pair) x1, BGM (RCA pair) x1, HDMI x2, Optical x1, Bluetooth x1, USB Playback x1 Microphone Input Front (TRS) x2, Rear (TRS) x1, Output Connectors ARC (HDMI) x 1, AUX (RCA pair) x 1, Recording output (RCA) x1 Subwoofer output (RCA) x1, Speaker output (Binding Post) x2, Control Connectors PC (USB Type B) x1, RS232 (3.5mm socket) x1 Dimensions (w x h x d) 16.85\\" x 2.99\\" x 12.4\\" (428mm x 76mm x 315mm) Net Weight 11.90lb (5.4kg), Shipping Weight 15.43lb (7.0kg) Power Requirements 100V - 240V ~50/60Hz. The Work should complete in all respect and as desired by Engineer-in-charge of work at site. |
| 23 | Supply of Booster Amplifier 240W compact Class-D mixer amplifier with Signal to Noise Ratio at rated power output > 75 dB, an integrated audio source, 5-zone selectors, zone paging microphones, volume control for each input, and an equalizer Built-in speech filter for increased intelligibility Priority & VOX operation, Cooling: Convection cooled, Frequency Bandwidth: 80 Hz ~ 15 kHz with less than 0.5% THD, Total Harmonic Distortion (THD): < 0.5% at 1 kHz rated power, 3-Level Priority with Mute Function: Prioritizes audio sources, Protection System: Current limiting, overcurrent, and thermal protection, Paging Station: Includes 5-zone paging stations, Extendable: Can be expanded with additional audio mixers and power amplifiers, Compact and Lightweight: Designed for space-saving and portability, Phantom Power 15V DC. The Work should complete in all respect and as desired by Engineer-in-charge of work at site. |
| 24 | Supply of Speaker Cable 2x1.5 SQMM High quality Twisted pair speaker cable, PVC insulation Core Size: 1.5 sq. mm. Type: Heat Resistant Flame Retardant (HRFR).The cable conform stoIS694, astandard for flexible. cables. Conductors are of class V as per IS 8130, which is a standard for copper conductors bare copper conductor, Conductor: Multiwire, bright annealedflexiblebareelectrolyticgradeCuconductor.Thecableconforms to IS 694, a standard for flexible cables. Transparent insulation with high oxygen and temperature index. Distortion-Free Voice: Designed to ensure distortionorattenuation-freevoicewithverylow\\"dB\\"loss..The Work should complete in all respect and as desired by Engineer-in-charge of work at site. |
| 25 | Supply of 2-3 Meter Audio/Video Aux Cable with 1-2 male to 2 male RCA Plug Compatible for amplifier/ Speakers/Sound bar etc.The Work should complete in all respect and as desired by Engineer-in-charge of work at site. |
| 26 | Supply of Commrack 15U Wall Mount RACKS - 19\\" mounting rails movable at the front & rear, 576mm wide x 600mm deep including exhaust fan and other associated accessories. The Work should complete in all respect and as desired by Engineer-in-charge of work at site. |
| 27 | Supply of unidirectional, gooseneck condenser microphone, frequency response of 100 Hz to 16 kHz, a sensitivity of around -44 dBV/Pa, and operates on phantom power with 5-pin DIN connector. Complete in all respects as desired by the Engineer in charge of work at site. The Work should complete in all respect and as desired by Engineer-in-charge of work at site. Please Enable Macros to View BoQ information |
