|
| 1 | Supplying and erecting steel centering for plain surface and basement for grade beams, column footings, plinth beams, staircase steps with all cost and conveyance etc complete. |
| 2 | Lintel |
| 3 | For Beam & Slab |
| 4 | Supplying , fabricating and placing in it position of MS or RTS rod including the cost of steel & Binding wire, labour charges for cutting, bending, placing & tying with grills and conveyance etc., complete. |
| 5 | Reinforced Cement concrete 1:1.5 :3 (one cement, one and half sand & three course aggregate) using 20mm gauge hand broken/ and broken granite stone for all RCC items of works excluding centering shuttering and cost of reinforcement but including curing etc.,complete and also including fixing fan clamps and fixtures in rcc works wherever necessary as directed by departmental officer etc., complete. |
| 6 | First Floor |
| 7 | Brick work in the cement mortar 1:5 ( one cement Five sand) mix using well burnt country bricks of size 8 ¾” x 4 ¼” x2¾” from approved quarry including all cost and conveyance of materials to site and all labours charges etc., complete as per standard specification. |
| 8 | First Floor |
| 9 | Second floor |
| 10 | Plastering with c.m. 1:3 (one cement and threesand) 10mm thick including all cost of materials and labour charges etc. complete. |
| 11 | Plastering with c.m. 1:5 (one cement and five sand) 12mm thick including all cost of materials and labour charges etc. complete. |
| 12 | Weathering Course with Concrete Broken Brick (S.I.No.278) & ( P & D) Data 54.Jelly 20mm gauge in pure slaked lime (no sand to be added) over roof slab,the proportion of brick jelly to lime being '32 to 12.5 well beated with wooden beaters for giving required slope and thickness as directed by the departmental officers etc., complete.-10 cum |
| 13 | Finishing the top of roof with one course of machine pressed tiles of size 200 mm x 200 mm x 20 mm of approved quality in Cement Mortar 1:3 (One Cement add three sand) 12 mm thick mixed with water proofing compound conforming to ISS at 2% by weight of cement used and the joints pointed neatly to full depth of tiles with the same cement mortar mixed with red oxide and water proofing compound including curing etc., co |
| 14 | Paving the floor with Vitrified tiles of size 600mm x 600mm x 8mm in Cement Mortar 1:3, 20mm thick with all cost and conveyance of materials etc., for flooring of self designed grooves and both way special colour tile of best quality and pointing with white cement using atthe rate of 0.40Kg / sq m including finishing thejoint neatly and pointing flush with tile surfaceetc complete |
| 15 | Paving the floor with design Antiskirt ceramic tiles (colour and shade as directed) of size 305 mm x 305mm x 6 mm in all floors over a base layer of cement mortar 1:3 (One part of Cement and Three part of Plastering Sand (P- Sand)), 20mm thick laid in-situ and pointed with same coloured cement |
| 16 | Supplying and fixing of MS iron door with iron angles including all cost and conveyance all materials to the site and all labour charges etc. complete |
| 17 | Painting two coats with approved interior and exterior emulsion paint over cement plastered wall surfaces, ceiling and other new surfaces including Cleaning preparing the surface and curing etc., complete as per standard specification |
| 18 | Painting two coats with best quality enamel paint over New iron work including all cost of material and labour charges etc, complete |
| 19 | Wiring with 2x1.5sqmm PVC unsheated SC.alu.cable of 1100V grade with sutable PVC riged pipe on wall and ceiling with accessories and TW switch box and 5A F.T Switch in flush withwall 3mm thick hylum sheet cover for making good of the Concealed portion with painting of sutable colour and continues earthwire connection of 19 SWG TC wire for Concealed PVC light point /Fan point (SD 1) |
| 20 | Wiring with 2x1.5sqmm PVC unsheated SC.alu.cable of 1100V grade with sutable PVC riged pipe Concealed on wall and ceiling with accessories and in flush with wall with 150mm X 100mm x113mm TW switch box and 5A F.T Switch in flush withwall 3mm thick hylum sheet cover for making good of the Concealed portion with painting of sutable colour and continues earthwire connection of 14 SWG TC wire for Concealed PVC Plug Point (SD 38) |
| 21 | Supplying and fixing of single box type 4'40 w flu fitting complete with Electronic Ballast with TW round block on wall or ceiling with flutube PVC unsheathed Copper leads from terminal to the fitting (SD 88) |
| 22 | Wiringwith2x4sq.mm.(56/0.3mm)PVCinsulatedSCunsheathedcoppercableconductorcableof1100VgradeinsuitableheavygaugeMSconduitpipeonwallandceilingwithMSaccessorieswith150mmx100mmx75mmMSswitchboxfor15A3pinnoninterlockingCSplugwithpaintingofsuitablecolourwithcontinuousearth wire connection by 14 SWG TC wire for open power plug point (SD 13) |
| 23 | Supply and fixing of 1200mm (48\\") sweep AC ceiling fan complete with stepped electronic 300W regulator with 1 metre down rod with fan clamp with side plates and cross arm of size 450mm (18\\") (SD 106) |
| 24 | Supply and Run off 2 x 4 Sqmm 56/0.3 PVC insulated SC unsheathed cu.conductor of 1100V grade in rigid pipe conceled in wall and ceiling with continious earth wire connection of 14 SWGC TC wire and making good of the conceled portion with suitable colour(SD 56) |
| 25 | Supply and fixing of TNEB meter Board suitable for 32A Three Phase service connection with 3 Nos. 32A Fuse unit (500V) 32A neutral link and earth link (1\\" x 1/8\\" Copper flat) on TW plank of size 600mm x 450mm x 19mm with supporting TW reepers of 1\\" thick an either side with painting with suitable bolt and nuts for fixing the TW plank on wall with earth connection and inter connection with 7/20 PVC insulated copper wire from EB meter to fuse unit. SD 127 |
| 26 | Supplying and fixing of service material set with necessary 3Phase 32A aerial fuse unit for63A fuse unit on suitable MS SHEET COVERED WITH 6MM THICK HYLEM SHEET ON SUITABLE ANGLE IRON WORK THE TAPPING POLE with necessary clamps(Data G) SD 132 |
| 27 | Earthing as per PWD Standard with an earth electrode of 2Mtr class B\\" GI Pipe of dia not less than 32mm complete with necessary masonry work (SD 234) |
| 28 | Supply and Run off 1No 8 SWG GI Wire for Earth Connection (SD 74) |
| 29 | Supply and fixing of 25W LED outdoor street light fitting (Philips/havells) Complete with TW round blocks on wall or ceiling with flu tube pvc unsheathed copper leads from terminals to the filling. |
| 30 | Manufacturing, Supplying and Fixing of Stainless Steel Hand rails for staircase using 50mm dia 304L Grade Stainless Steel pipe of 1.60mm thick at required locations to a height of 900mm from finished floor level welded to 38mm dia Stainless Steel pipe post of 1.00mm thick as vertical at 900mm centre with 2 Nos. of 25mm dia intermediate horizontal stainless steel pipe of 1.60mm thick in between. The vertical pipe has to be welded to the 100 X 100 X 6mm MS base plate encased in the base concrete. The rate is inclusive of the charges for cutting, bending, welding, grinding, polishing, conveyance, electrical charges, etc. complete Please Enable Macros to View BoQ information |
