|
| 1 | Part A Civil Works |
| 2 | Repair to plaster of thickness 12 mm to 20 mm in patches of area 2.5 sqm and under, including cutting the patch in proper shape, raking out joints and preparing plastering the wall surface with white cement based polymer modified self curing mortar, including disposal of rubbish, all complete as per the direction of Engineer-In-Charge. |
| 3 | Providing and fixing Sintex / Bajaj or equivalent make of ISI marked PVC false ceiling (or wall Panelling) on MS rectangular hollow section 38 mm x 25 mm fixed to wall with PVC roll plugs and main runner & intermediate section of MS square tube 25 mm x 25 mm duly coated with anticorrosive primer & ceiling panel made out of rigid PVC multichamber hollow plastic section of 6 mm thick as per instruction of Engg-in-charge |
| 4 | Providing and fixing chromium plated brass curtain rod having wall thickness of 1.25 mm with two chromium plated brass brackets fixed with C.P. brass screws and PVC sleeves etc., wherever necessary complete : 20 mm dia |
| 5 | Providing and fixing 900 mm high S.S 304 Grade Stainless steel railing with 40 mm diameter and 1.5 mm thick at top, 40 mm diameter and 1.5 mm thick vertical supports spaced at 1.5 m center to center and 8 mm thick toughened glass including fabricating, fixtures, errecting, necessary welding, grinding, finishing, buffing to stainless steel pipe etc. complete |
| 6 | Providing and fixing Canopy Retractable awning (Manual) Fabric : Saulenda Acrylic with 10 year leakage warranty and Frame : New Sun Setter with 5 years mechanical warranty as per instruction of Engineer in charge. |
| 7 | Providing and applying smooth stone textured finished 1.5 to 2 mm thick as per manufacturer spcifications over old and new plastered surface i.e. scrapping the surfae, applying specified primer for surface stabilisation and making necessary pattern there on by trawel / spraying as per architectural drawing and finishing with 2 or more coat of pure acrylic based clear coat paint complete as per the direction of E/I on internal surface with necessary scaffholding |
| 8 | Providing, applying, fabricating and fixing panel of aluminium composite panel cladding in approved shape made out of 4 mm thick ACP sheet material consisting of 3mm thick Fgrademineralcore following NBC part IV Fire and lifesafety (having 2 hours fire resistance in accordance to ASTME 119-12 and BS 476 part 6 and 7 class) sand witched between two aluminium sheets (each 0.5 mm thick of AA5005 / AA3105 grade). The aluminium composite panel cladding sheet shall be coil coated with kynar 500 based PVDF/ Lumiflon based fluro polymer resin (having 70:30 ratio of PVDF and acrylic) coating of approved colour and design on top face and polymer (service) coating of bottom face as specified using stainless steel screws, nuts, bolts, washers, cleats, weather silicon sealent, backer rod setc. overall weight of the ACP shall not be less than 7.5 Kilogram / One Square Metre) |
| 9 | Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing I paneling, C.P. brass / stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-charge. (Glazing, paneling and dash fasteners to be paid for separately) : For shutters of doors, windows & ventilators including providing and fxing hinges/ pivots and making provision for fixing of fittings wherever required including the cost of EPDM rubber / neoprene gasket required (Fittings shall be paid for separately). Anodised aluminium (anodised transparent or dyed to required shade according to IS: 1868, Minimum anodic coating of grade AC 15) |
| 10 | Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with EPDM rubber / neoprene gasket etc. complete as per the architectural drawings and the directions of engineer-in-charge . (Cost of aluminium snap beading shall be paid in basic item): With float glass panes of 4.0 mm thickness (weight not less than 10 kg / sqm) |
| 11 | Providing and fixing fly proof stainless steel grade 304 wire gauge, to windows and clerestory windows using wire gauge with average width of aperture 1.4 mm in both directions with wire of dia. 0.50 mm all complete. With 12 mm mild steel U beading |
| 12 | Providing and fixing stainless steel (Grade 304) of Hollow tubes, channels, plates etc., including welding, grinding, buffing, polishing and making curvature (wherever required) and fitting the same with necessary stainless steel nuts and bolts complete, i/c fixing the railing with necessary accessories & stainless steel dash fasteners , stainless steel bolts etc., of required size, on the top of the floor or the side of waist slab with suitable arrangement as per approval of Engineer-in- charge, (for payment purpose only weight of stainless steel members shall be considered excluding fixing accessories such as nuts, bolts, fasteners etc.). |
| 13 | Grading roof for water proofing treatment with Cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) |
| 14 | Providing and fixing on wall face unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion, (i) Single socketed pipes 110 mm diameter |
| 15 | Providing and fixing on wall face unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion, (i) Single socketed pipes. 75 mm diameter |
| 16 | Providing and fixing 18 mm thick gang saw cut, mirror polished, premoulded and prepolished, machine cut for kitchen platforms, vanity counters, window sills, facias and similar locations of required size, approved shade, colour and texture laid over 20 mm thick base cement mortar 1:4 (1 cement : 4 coarse sand), joints treated with white cement, mixed with matching pigment, epoxy touch ups, including rubbing, curing, moulding and polishing of edges to give high gloss finish etc. complete at all levels. Granite stone slab of all colour and texture except black, Cherry / Ruby red. Area of slab upto 0.50 sqm |
| 17 | Providing and laying Vitrified tiles in floor in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS : 15622, of approved brand & manufacturer, in all colours and shade. Fixing glazed/ Ceramic/ Vitrified floor tiles with cement based high polymer modified quick-set tile adhesive (Water based) conforming to IS: 15477, in average 3 mm thickness. The tiles must be cut with the zero chipping diamond cutter only. Laying of tiles will be done with the notch trowel, plier, wedge, clips of required thickness, leveling system and rubber mallet for placing the tiles gently and easily. Glazed Vitrified tiles Matt/Antiskid finish of size Size of Tile 600 x 1200 mm |
| 18 | Providing and laying Vitrified tiles in different sizes (thickness to be specified by the manufacturer), with water absorption less than 0.08% and conforming to IS: 15622, of approved brand & manufacturer, in all colours and shade, in skirting, riser of steps, laid with cement based high polymer modified quick set tile adhesive (water based) conforming to IS: 15477, in average 6 mm thickness, including grouting of joints (Payment for grouting of joints to be made separately). Size of Tile 600x600 mm |
| 19 | Supply & Fixing of Full Body Vitrifid Step tiles Ready to install Treads and Risers 12 mm thick, required width and required finish in plain pattern including Cement float, filling joints, with neat cement slurry, Natural sand, curing and cleaning etc complete |
| 20 | Supplying and fixing rolling shutters of approved make, made of required size M.S. laths, interlocked together through their entire length and jointed together at the end by end locks, mounted on specially designed pipe shaft with brackets, side guides and arrangements for inside and outside locking with push and pull operation complete, including the cost of providing and fixing necessary 27.5 cm long wire springs manufactured from high tensile steel wire of adequate strength conforming to IS: 4454 - part 1 and M.S. top cover of required thickness for rolling shutters.80x0.90 mm M.S. laths with 0.90 mm thick top cover |
| 21 | Providing and fixing Stainless Steel A ISI 304 (18/8) kitchen sink as per IS:13983 with C.I. brackets and stainless steel plug 40 mm,including painting of fittings and brackets, cutting and making good the walls wherever required : Kitchen sink with drain board 510 x 1040 mm bowl depth 250 mm |
| 22 | Brick work with non modular fly ash bricks conforming to IS:12894, class designation 10 average compressive strength in super structure above plinth level up to floor V level in : Cement mortar 1:6 (1 cement : 6 Coarse sand) |
| 23 | 12 mm cement plaster of mix : 1:6 (1 cement: 6 fine sand) |
| 24 | Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level : 1:3:6 (1 Cement : 3 coarse sand (zone-III) derived from natural sources : 6 graded stone aggregate 40 mm nominal size derived from natural sources) |
| 25 | Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level : 1:2:4 (1 cement : 2 coarse sand (zone-III) derived from natural sources : 4 graded stone aggregate 20 mm nominal size derived from natural sources) |
| 26 | Providing and fixing wooden moulded beading to door and window frames with iron screws, plugs and priming coat on unexposed surface etc. complete :2nd class teak wood 50x12 mm |
| 27 | Dismantling steel work in built up sections in angles, tees, flats and channels including all gusset plates, bolts, nuts, cutting rivets, welding etc. including dismembering and stacking within 50 metres lead) |
| 28 | Structural steel work riveted, bolted or welded in built up sections, trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete. |
| 29 | Providing and fixing precoated galvanised iron profile sheets (size, shape and pitch of corrugation as approved by Engineer-in-Charge) of total coated thickness 0.50 mm (base metal of minimum 0.45mm thickness with total coating thickness of 0.05mm) with zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns. Sheet should have protective guard film of 25 microns minimum to avoid scratches during transportation and should be supplied in single length upto 12 metre or as desired by Engineer-in- charge. The sheet shall be fixed using self drilling /self tapping screws of size (5.5x 55 mm) with EPDM seal, complete upto any pitch in horizontal/ vertical or curved surfaces, excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required. |
| 30 | Providing and fixing ISI marked flush door shutters conforming to IS : 2202 (Part I) decorative type, core of block board construction with frame of 1st class hard wood and well matched teak 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutters. 25 mm thick (for cupboard) including ISI marked nickel plated bright finished M.S. Piano hinges IS : 3818 marked with necessary screws |
| 31 | Providing and fixing ISI marked flush door shutters conforming to IS : 2202 (Part I) decorative type, core of block board construction with frame of 1st class hardwood and well matched teak 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutters. 30 mm thick including ISI marked Stainless Steel butt hinges with necessary screws |
| 32 | Providing and fixing 1 mm thick Sunmica laminate over panelling / partition etc as per instruction of E/I. |
| 33 | Providing and fixing chromium plated brass handles with necessary screws etc. complete: 125 mm |
| 34 | Providing and fixing bright finished brass tower bolts (barrel type) with necessary screws etc. complete : 100x10 mm |
| 35 | Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete |
| 36 | Applying one coat of water thinnable cement primer of approved brand and manufacture on wall surface : Water thinnable cement primer |
| 37 | Wall painting with premium acrylic emulsion paint of interior grade, having VOC (Volatile Organic Compound ) content less than 50 grams/ litre of approved brand andmanufacture, including applying additional coats wherever required to achieve even shade and colour. Two coats |
| 38 | Painting with synthetic enamel paint of approved brand and manufacture to give an even shade : One or more coats on old work |
| 39 | Providing and applying two coats of exterior weather shield paint of approved manufacture and of approved colour to the plastered surfaces including cleaning, preparing the plaster surface, applying primer coat, scaffolding if necessary, and watering the surface for two days etc complete |
| 40 | Finishing with Epoxy paint (two or more coats) at all locations prepared and applied as per manufacturer's specifications including appropriate priming coat, preparation of surface, etc. complete. On concrete work |
| 41 | Finishing walls with Premium Acrylic Smooth exterior paint with Silicone additives of required shade Old work (Two or more coats applied @ 1.43 ltr / 10 sqm)over existing cement paint surface |
| 42 | Dismantling roofing including ridges, hips, valleys and gutters etc., and stacking the material within 50 metres lead of G.S. Sheet |
| 43 | Supply & Fixing of Rock / Stone Finished out door vitrified flooring Tiles 20 mm thick and required width wide in plain pattern including Cement float, filling joints with neat cement slurry, Natural sand, curing and cleaning complete |
| 44 | 12\\" SS Handle: Supplying, fitting fixing Stainless Steel 'D' or 'H' type of size 300 mm x 19 mm tubular Handle with Grade 304, CE certified, marked & conforming to EN-1154 of approved quality (Internationally reputed brand like Dorma, Geze, Hafele, Assabloy & Magnumetc.) as per direction of Eingineer-in Charge fitted and fixed complete including all taxes & incidental charges. |
| 45 | Disposal of building rubbish / malba / similar unserviceable, dismantled or waste materials by mechanical means, including loading, transporting, unloading to approved municipal dumping ground or as approved by Engineer-in-charge, beyond 50 m initial lead, for all leads including all lifts involved |
| 46 | Earth work in excavation by mechanical means (Hydraulic excavator)/manual means over areas (exceeding 30 cm in depth, 1.5 m in width as well as 10 sqm on plan) including getting out and disposal of excavated earth lead upto 50 m and for all lift, as directed by Engineer-in-charge. All kinds of soil |
| 47 | Kota stone slab flooring over 20 mm (average) thick base laid over and jointed with grey cement slurry mixed with pigment to match the shade of the slab, including rubbing and polishing complete with base of cement mortar 1 : 4 (1 cement : 4 coarse sand) : 25 mm thick |
| 48 | Providing and fixing 1st quality ceramic glazed floor tiles conforming to IS : 15622 (thickness to be specified by the manufacturer ) of approved make in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer-in-Charge in skirting, risers of steps and dados over 12 mm thick bed of cement Mortar 1:3 (1 cement: 3 coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm including pointing in white cement mixed with pigment of matching shade complete |
| 49 | Providing and laying Ceramic glazed floor tiles of size 300x300 mm (thickness to be specified by the manufacturer) of 1st quality conforming to IS : 15622 of approved make in colours such as White, Ivory, Grey, Fume Red Brown, laid on 20 mm thick cement mortar 1:4 (1 Cement : 4 Coarse sand), Jointing with grey cement slurry @ 3.3 kg/sqm including pointing the joints with white cement and matching pigment etc., complete. |
| 50 | Providing & Fixing Jaquar WC Area Bib Cock Continental CON-CHR-047KN – Chrome or equivalent of good quality all complete. |
| 51 | Providing & Fixing Jaquar 3 Way Wall Mixer Fusion FUS-CHR-29281 Normal Flow - Chrome Finish or equivalent of good quality or equivalent complete. all complete. |
| 52 | Providing and fixing towel rail CAN-1111SM equivalent 600 mm Long stainless steel complete with brackets fixed to wooden cleats with CP brass screws with concealed fittings arrangement of approved quality. |
| 53 | Providing & Fixing Jaquar Health Faucet Allied ALD 573 or equivalent of good quality all complete. |
| 54 | Providing & Fixing Jaquar Towel Rack Continental Series ACN 1181S or equivalent of good quality all complete. |
| 55 | Providing & Fixing Jaquar Toilet Roll Holder With Flap Kubix Prime Series AKP 35753PS or equivalent of good quality all complete. |
| 56 | Providing and fixing PVC Connection of Jaqaur or equivalent Make ALD-805B equivalent 450 mm Long and approved by E/I. |
| 57 | Providing and fixing Corner Glass Shelf ( with bracket) CAN-1173 of Jaquar or equivalent make. |
| 58 | Providing and fixing Glass Shelf of Jaquar or equivalent make ACN-1171N 600 mm long all complete. |
| 59 | Providing and fixing 600x450 mm beveled edge mirror ofsuperior glass (of approved quality) complete with 6 mm thick hard boardground fixed to wooden cleats with C.P. brass screws and washers complete. |
| 60 | Providing & Fixing Jaquar WC area 2 way bibcock alive ALI85041 or equivalent of good quality all complete. |
| 61 | Providing and fixing C.P. brass angle valve for basin mixer and geyser points of approved quality conforming to IS:8931 15mm nominal bore |
| 62 | Providing & Fixing Jaquar or equivalent Table Mounted Regular pillar cock / Kitchen Sink Mixer Fusion FUS-29009B with Swinging Spout in Chrome Finish or equivalent of good quality all complete. |
| 63 | Providing & Fixing aquar Floor Mounted White 1 Piece WC Vignette VGS-WHT-81853P180UF with P-Trap or equivalent of good quality all complete. |
| 64 | Providing & Fixing Jaquar Wash Basin Full Pedestal Oval Shaped White Basin Area Continental CNS WHT 811 or equivalent of good quality all complete. |
| 65 | Providing & Fixing Jaquar Single Flow Overhead Showers OHS-CHR-35497 – Chrome finish or equivalent of good quality all complete. |
| 66 | Providing and placing on terrace (at all floor levels) polyethylene water storage tank, IS : 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank. |
| 67 | Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer in Charge. Concealed work, including cutting chases and making good the walls etc. 25 mm nominal dia Pipes |
| 68 | Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer in Charge. Concealed work, including cutting chases and making good the walls etc. 20 mm nominal dia Pipes |
| 69 | Providing service of Architect for improving Aesthetics of the Bungalow @ 2 % of the estimated cost (Sl no 1 to 67) |
| 70 | Part B Electrical Works |
| 71 | Supplying and laying HMS PVC conduit FRLS grade 25 mm dia with necessary accessories in RCC work/false ceiling/false flooring as per specification No. WG-MA/CC. |
| 72 | Supplying and erecting mains with 3x2.5 sq.mm FRLSH copper PVC insulated wire laid in provided conduit / trunking/inside pole/Bus bars or any other places as per specification No: WG-MA/BW |
| 73 | Supplying and erecting mains with 3x4sq.mm FRLSH copper PVC insulated wire laid in provided conduit /trunking /insidepole /Busbars o rany other places as per specification No: WG-MA/BW |
| 74 | Point wiring for light/bell concealed type in min 20 mm FRLS grade HMS PVC conduit with 1.5 sq.mm. (2+1E) FRLSH grade copper wires, modular type switch, earthing and required accessories as per specification No: WGPW/CW |
| 75 | Supplying and erecting modular types switch 6A/10A duly erected on provided plate and box with wiring connections complete. |
| 76 | Supplying and erecting modular type switch 16A duly erected on provided plate and box with wiring connections complete. |
| 77 | Supplying and erecting modular type 3pin 6A multi socket with safety shutter, duly erected on provided plate and box with wiring connections complete |
| 78 | Supplying and erecting modular type 3 pin 6 / 16A multi socket with safety shutter, duly erected on provided plate and box with wiring connections complete |
| 79 | Supplying and erecting modular type (two module) electronic step regulator forfan, on provided plate and box with wiring connections complete. |
| 80 | Supplying and erecting 16 / 20 / 25 A starter (modular range) 2 module for AC unit on provided box complete & duly concealed with necessary material and connected. |
| 81 | Supplying and erecting bracket fan 400 mm. sweep A. C. 230 volts 50 cycles 1350 RPM. Oscillating type, plastic or metal blades chrome plated guard with speed regulator and moisture proof treatment to winding and with ‘E’ class insulation. |
| 82 | Point wiring for ceiling fan in 20 mm FRLS grade HMS PVC conduit with 1.5 sq.mm (2+1E) FRLSH grade copper wire, modular type switch, earthing and required accessories as per specification No: WG-PW/S |
| 83 | Supplying, erecting & marking SPMCB 6A to 32A, B-series with rated short - circuit breaking capacity (Icn) 10kA in provided distribution board as per specification no. SW-SWR/MCB |
| 84 | Supplying, installation and testing of maintenance free earthing comprising of Electrode of 17.2 mm diameter Low Carbon Steel with 250 micron copper bonded earthing rod of Length 3m along with 25 kg Carbon based environment friendly back fill ground enhancing compound required to fill up the excavated earth with required quantity complete, and recording the results Specification no. EA-MOBI |
| 85 | Supplying, erecting & marking SPMCB 6A to 32A, C-series with rated short - circuit breaking capacity (Icn) 10kA in provided distribution board as per specification no. SW-SWR/MCB |
| 86 | Supplying, erecting and marking four pole isolators only switch version of miniature circuit breakers of 63A in provided distribution board. |
| 87 | Providing & erecting 4 Pole MCCB, 415 V, 100A, rated short-circuit breaking capacity 25 kA (Ics=100% of Icu), adjustable thermal (overload) setting and fixed magnetic setting with provided leads, provision for installation of shunt/UV/trip alarm contact. MCCB with phase barriers on both sides, insulation with stand capacity 800V, no line-load bias in provided enclosure/panel as per specification no. SW-SWR/MCCB (For Rate of 4 pole MCCB add is 20% extra) |
| 88 | Supplying & erecting triple pole and neutral distribution board (TPNDB), SPMCB of 8 ways / phase (24 poles), with door, 1.2mm thickness surface/ flush mounted, IP 43 Protection on iron/GI frame (horizontal busbar type) as per specification no. SW-SWR/MCBDB |
| 89 | Dismantling the existing light, fan, bell, clock, independent plug point,wiring including circuit mains of all types along with accessories etc.complete as per specification No: WG-DM/PW |
| 90 | Supplying and erecting modular type blanking plate one module, duly erected on provided plate & box. |
| 91 | Supplying and erecting unbreakable concealed type modular switch box withdouble mounting plate for 4 module duly flushed to wall with required chiselling and finishing with cement mortar / POP as per required to match thebackground. |
| 92 | Supplying and erecting unbreakable concealed type modular switch box withdouble mounting plate for 6 module duly flushed to wall with requiredchiselling and finishing with cement mortar / POP as per required to match thebackground. |
| 93 | Supplying and erecting unbreakable concealed type modular switch box withdouble mounting plate for 12 module duly flushed to wall with required chiselling and finishing with cement mortar / POP as per required to match the back ground |
| 94 | Supplying and erecting unbreakable concealed type modular switch box withdouble mounting plate for 16/18 module duly flushed to wall with required chiselling and finishing with cement mortar / POP as per required to match thebackground |
| 95 | Supplying, erecting & commissioning 2 pole RCCB 16/25A, electromagnetic type with.30/100/300 mA sensitivity with earth leakage trip indication complete as per specification no. SW-RCCB. |
| 96 | Total impact of GST for the purpose of CTC Please Enable Macros to View BoQ information |
