|
| 1 | Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises to a distance not exceeding 500 mtr complete all as specified and directed. |
| 2 | M&L for coloured, non- skid joint free,edge cut, ceramic tiles,1st quality, 7 to 8 mm thick ,square/ rectangular, area of each tile exceeding 0.11 but not exceeding 0.18 Sqm in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the surface over and including 15mm thick screed bed or bedding layers in Cement Mortar 1:4, complete all as specified and directed. |
| 3 | M&L for coloured, non- skid joint free,edge cut, ceramic tiles,1st quality, 7 to 8 mm thick ,square/rectangular, polished, area of each tiles exceeding 0.18 but not exceeding 0.38 Sqm in floors, set and jointed in neat cement slurry and pointed in white or coloured cement to match the surface over and including 15mm thick screed bed or bedding layers in Cement Mortar 1:4, complete all as specified and directed. |
| 4 | All as per BOQ srl item No 3.00 (here-in-above) but in vertical surfaces with backing coat of 10 mm thick other than fair faces of wall in CM 1:4 complete all as specified and as directed. |
| 5 | M&L for glazed ceramic coloured tiles of size 300x450x7mm thick on vertical surface as in skirting/dado set and jointed in neat cement slurry & pointed in white or coloured cement to match over 10mm thick rendering in CM 1:4 on brick / concrete walls complete all as specified and directed. |
| 6 | Dismantling of stone slabs/ floor and wall tiles of any description or thickness as in floors, aprons etc laid and bedded in any mortar including rubbish off the premises to a distance not exceeding 500 mtr complete all as specified and directed. |
| 7 | M&L for 16 -18 mm thick Udaipur green stone slab as in shelves , over cooking platform ,machine cut bedded and jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of Udaipur green stone including grinding and poshing laid over 20mm thick screed bed in cement mortar 1:6 including bull nosing of edges and gas pipe hole up to bottom of slab complete all as specified and as directed . |
| 8 | Taking up or down steel water tubing and connections for refixing or removal from site for 15 mm bore pipe complete all as specified and directed. |
| 9 | Taking up or down steel water tubing and connections for refixing or removal from site for 20 mm bore pipe complete all as specified and directed. |
| 10 | S&F galvanised mild steel water tubes 15 mm bore, medium grade, galvanised with all fittings and fixed complete to wall and ceiling or laid in floor including cutting chasing for concealed whereas required complete all as specified and as directed. |
| 11 | S&F galvanised mild steel water tubes 20 mm bore, medium grade, galvanised with all fittings and fixed complete to wall and ceiling or laid in floor including cutting chasing for concealed whereas required complete all as specified and as directed. |
| 12 | Taking down chowkhats or frames not exceeding 1.5 sqm each with shutters without taking off shutters from the frame and removing from site, including cutting holes for taking out hold fasts and making good disturbed portion in cement mortar 1:3, complete all as specified and as directed. |
| 13 | Taking down chowkhats or frames exceeding 1.5 but not exceeding 4 sqm each with shutters without taking off shutters from the frame and removing from site, including cutting holes for taking out hold fasts and making good disturbed portion in cement mortar 1:3, complete all as specified and as directed. |
| 14 | S&F solid PVC door frame of size 50x47mm made out of 5mm thick plain/wooden grain printed coloured PVC sheet reinforced with MS square tube all as per specifications and drawing given in SSR Part-I 2009 all as per manufacturer's instructions and making good the disturbed surfaces complete all as specified and as directed |
| 15 | S&F factory made solid PVC moulded door shutter (with wood free EPS), 28 to 30mm thick (styles), with 2, 4, 6 raised panel design with 2mm thick moulded PVC sheet on the front and 2mm thick coloured PVC sheet (tint as approved) on back faces and fixing in frame at site all as shown in and specified in MES Schedule 2020 & 2009 complete all as specified and as directed |
| 16 | S&F flush shutters solid core construction with block board core and plywood face panels commercial type on both sides 30 mm thickness complete all as specified and directed. |
| 17 | M&L for Preparation of new wooden surfaces of any description over 10 cm width or girth & applying two coats synthetic enamel paint over a coat of pink primer complete all as specified and directed. |
| 18 | S&F powder coated aluminium anodised window(Three track sliding window, 02 shutters with glass and 01 shutter with wiremesh) made out hollow aluminium as mentioned below. Each shutter shall have 01 No. aluminium handle of 75mm size and 02 Nos aluminium tower bolt 150mm long. Window shall be glazed with 4.00mm thick tinted glass fixed with glazing clips, rubber beading and anodized aluminium beading and stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm fixed with tinned tacks or stainless steel wire staple etc complete all as specified and as directed. Chowkhat bottom section size : 50.3mm X 26.0mm, 1.20mm thickChowkhat top & sides section size : 50.3mm X 15.0mm, 1.00mm thickShutter top & bottom rail section size : 101.60mm X 44.45mm, 1.50mm thickShutter inner lock rail section size : 37.5mm x 15.0mm, 1.50mm thickShutter side mid rail section size : 37.5mm x 15.0mm, 1.36mm thickNote :- (i) The weight of Aluminium sectons shall not be less than 0.55Kg/RM. (ii) Minimum thickness of anodization shall be 15 micron. (iii) The door/window shall be as per drawings/directions of Engineer-in-charge and drawing may be reffered from GE office. |
| 19 | S&F powder coated anodised aluminium grill of approved design/pattern, mesh size 100mm x 100mm withh the help of glazingg plate & aluminium bars of 8mm dia using 'U' shape channel 25mm x 12mm, fixed to aluminium frame work complete all as specified and directed. |
| 20 | Roughening surface of old concrete floor by picking sweeping clean and washing down with water to remove dust etc and brushing neat cement slurry @ 3.0 Kg/Sqm complete all as specified and as directed. |
| 21 | M&L for rendering / screed bed 10mm thick in cement mortar 1:3 on concrete surface or roof / wall mixed with water proofing compound as per manufacturer's instructions, finished when concrete is green complete all as specified & directed. Note:- Water proofing compound shall be measured & paid separately. Please Enable Macros to View BoQ information |
| 22 | M&L for rendering / screed bed 10mm thick in cement mortar 1:3 on concrete surface or roof / wall mixed with water proofing compound as per manufacturer's instructions, finished when concrete is green complete all as specified & directed. Note:- Water proofing compound shall be measured & paid separately. Please Enable Macros to View BoQ information |
