|
| 1 | Earth work in excavation by mechanical means (hydraulic excavator) in trenches for foundations, drains, pipes, cables etc. (not exceeding 1.5 m in width) and for shafts, wells, cesspits and the like not exceeding 10 sqm on plan, including dressing of sides and ramming of bottoms lift upto 1.5 m, including getting out excavated earth and disposal of surplus excavated earth as directed, within a lead of 50 metres:2.9.1 All kinds of soil : |
| 2 | Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations etc. in layers not exceeding 20 cm in depth, consolidating each deposited layer by ramming and watering, lead upto 50 m and lift upto 1.5 m. |
| 3 | P/L of stone soling nallah boulders, hand packed, incl. carriage |
| 4 | Cast in situ Conc. with nominal mix M-7.50 grade with 40mm nominal size agg..incl all leads lifts, carriage complete incl all carriages complete job |
| 5 | Providing and laying in position specified grade of reinforced cement concrete including curing but excluding the cost of centering, shuttering, finishing and reinforcement. All works upto plinth level 1:1½:3 (1 cement : 1½ coarse sand : 3 graded stone aggregate 20 mm nominal size) incl all carriages |
| 6 | Reinforced cement concrete work in walls (any thickness) including attached pilasters, buttresses, plinth and string courses, fillets, columns, pillars, piers, abutments, posts and struts upto floor five level including curing but excluding cost of centering shuttering, finishing and reinforcement 1:1½:3 (1 cement : 1½ coarse sand : 3 graded stone aggregate 20 mm nominal size)incl carriage |
| 7 | Reinforced cement concrete work in beams, suspended floors, roofs having slope upto 15°, landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases upto five level including curing but excluding the cost of centring, shuttering, finishing and reinforcement with 1:1½:3 (1 cement : 1½ coarse sand : 3 graded stone aggregate 20 mm nominal size) incl carriage |
| 8 | Cast in situ Providing and laying in position cement concrete of specified grade including curing but excluding the cost of centring and shuttering. All work upto plinth level with: 1:3:6(1 cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size) incl carriage |
| 9 | Centring and shuttering including strutting, propping etc and removal of form work |
| 10 | Foundations, footings, bases of columns etc. for mass concrete. |
| 11 | Walls any thickness including attached buttresses, plinth and string courses etc. |
| 12 | Lintel, beams , plinth beams, Girders, bressumers and Cantilevers. |
| 13 | Columns, pillars, piers, abutments, posts and struts. |
| 14 | Suspended floors, roofs, landings, balconies and access platforms. |
| 15 | Edges of slabs and breaks in floors and walls |
| 16 | P/L and placing high strength doformed steel including cost of binding wire Thermo-Mechanically Treated bars of grade Fe-500D or more |
| 17 | Supplying and filling in plinth GSB/Boulders under floors including, watering, ramming, consolidating and dressing complete. |
| 18 | Brick with FPS bricks of class designation 75 in foundation, plinth and superstructure in cement mortar 1:6 (1 cement : 6 coarse sand) all carriages included |
| 19 | Providing wood work in frames of doors, windows, clerestory windows and other frames, wrought framed and fixed in position with hold fast lugs or with dash fasteners of required dia and length (hold fast lugs or with dash fasteners shall be paid for separately):Imported Wood |
| 20 | Providing and fixing panelled or panelled and glazed shutters for doors, windows and clerestory windows fixing with butt hinges of required size with necessary screws, including panelling using pre laminated both sides kitply, all complete as per direction of Engineer-in-charge. .Imported Wood 30mm thick |
| 21 | Providing and fixing glazed shutters for doors, windows and clerestory windows using 4mm thick float glass panes including ISI marked M.S. pressed butt hinges bright finished of required size with necessary screws.Imported Wood 30 mm thick |
| 22 | 15mm cement plaster on rough side of single or half brick wall in1:6(1 cement : 6 fine sand mortar) |
| 23 | 12 mm Cement plaster of mix: 1 : 6 ( 1 cement : 6 coarse sand) |
| 24 | Providing and applying white cement based wall putty of avg.2mm of approved brand and manufuture |
| 25 | Distempering with oil bound washable distemper of approved brand and manufacture to give an even shade on New work (two or more coats) over and including priming coat with water thinnable cement primer |
| 26 | Applying priming coat: With ready mixed pink or grey primer of approved brand and manufacture on wood work (hard and soft wood) |
| 27 | Painting with synthetic enamel paint of approved brand and manufacture to give an even shade two or more coats on wood / steel works. |
| 28 | Providing and laying vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS:15622 of approved make, in all colours and shades, laid on 20mm thick cement mortar 1:4 (1cement :4 coarse sand) including grouting the joints with white cement and matching pigmentsetc. complete |
| 29 | Structural steel work in built up sections, trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete. Including 1mm thick MS Sheets for sofits and eves boarding. |
| 30 | Providing colour coated High Rib roofing including vertical/curved surface fixed with polymer coated J or L hooks, bolts and nuts 8mm diameter with bitumen and G.I limpet washers or with G.I. limpet washers filled with white lead, including a coat of approved steel primer and two coats of approved paint on overlapping of sheets complete (upto any pitch in horizontal/vertical or curved surface)excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required. (0.50mm thick) incl ridges hips and valleys |
| 31 | Providing 40x5 mm flat iron hold fast 40 cm long including fixing to frame with 10 mm diameter bolts, nuts and wooden plugs and embeddings in cement concrete block 30x10x15 cm 1:3:6 mix ( 1 cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size). |
| 32 | Providing and fixing of 50 mm dia stainless steel railing of 304 grade of hallow tube 1.6mm thicl jindal/salem make or equivalent including welding and fixing with stainless steel machine screws for making required size and shape buffing etc.complete and fixing stainless steel balusters upto 900 mm height newel post 1050 not less than 1050 mm ss tubes 3 in one installed horizontally includind cuttng welding grinding to required shape and size by required steel dash fasterners nuts bolts screws etc.. |
| 33 | Providing and fixing of bright finished brass hardware fittings |
| 34 | 125 mm Handle |
| 35 | 200 mm Handle |
| 36 | 100x10mm Tower bolt |
| 37 | 250x10mm Tower bolts |
| 38 | Stay hooks |
| 39 | L-Dop 18\\" with inbuilt Locking sustem |
| 40 | Providing and fixing aluminum hanging floor door stopper, ISI marked, anodized (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade with necessary screws etc. complete :9.103.2 Twin rubber stopper |
| 41 | Supplying and fixing of 25 mm dia of medium class PVC conduit along with accessories like (Light boxes 04 no/room and fan boxes 02 no./ room) in slabs including cutting the wall and making good the same in case of recessed conduit as required. Please Enable Macros to View BoQ information |
