|
| 1 | Dismantling of Plain or corrugated steel sheeting, any gauge, thickness, including Nainital or similar pattern roof coverings, complete all as specified and directed. |
| 2 | S&F Pre-painted galvalume aluminium zine coating GI based corrugated steel sheeting 0.50mm thick any colour having tensile strenght 550Mpa in roof coverings fixed with self tapping screws, complete all as specified and directed. |
| 3 | S&F Pre-painted galvalume aluminum zinc coating GI based Plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in cladding to wall, fixed with self tapping screws complete all as specified and directed. |
| 4 | Dismantling wrought iron or mild steel work of any description specifically provided for gates, staircase railings, framed truss etc. complete all as specified and as directed. |
| 5 | S&F mild steel rolled sections, tubular section as in main and cross beams, hip and jack rafters; purlins where connected to common rafters and running rails and guides for sliding doors; fixed with angle cleats or other connecting plates complete all as specified and as directed. |
| 6 | Dismantling boarding, any description, fixed in any position with screws complete all as specifed and as directed. |
| 7 | S&F false ceiling with 4mm thick E-board 'Everest' make white prelaminated set embosed reinforced designer ceiling board of approved texture fixed with GI imposed grid frame work of size not more than 600x600mm having 24mm wide T-section, runner made of 0.33mm GI sheet and angle made of 0.45mm GI sheet suspended with 2mm dia stainless steel wire complete all as specifed and as directed. Note:- All exposed surface of grid frame work shall be powder coated white. |
| 8 | Fixing only false ceiling with 4mm thick E-board ceiling fixed with GI imposed grid frame work of size not more than 600x600mm having 24mm wide T-section, runner made of 0.33mm GI sheet and angle made of 0.45mm GI sheet suspended with 2mm dia stainless steel wire complete all as specifed and as directed. Note:- All exposed surface of grid frame work shall be powder coated white. |
| 9 | Dismantling floor, hearth or wall tiling, granite , marble including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specifed and as directed. |
| 10 | M & L, Virified Ceramic tiles 10 mm thick (square/ rectangular) polished, area of each tiles exceeding 0.42 sqm and not exceeding 1 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match including 15 mm thick screed bed in CM 1:6 as in floor etc set & jointed in neat cement slurry and pointed in coloured cement to match complete all specified and directed. |
| 11 | M & L, Virified Ceramic tiles 10 mm thick (square/ rectangular) polished, area of each tiles exceeding 0.42 sqm and not exceeding 1 sqm, in vetical surfaces etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match including 10mm thick rendering in CM 1:4 complete all as specifed and as directed. |
| 12 | M & L, non skid joint free ceramic tiles 7 to 8 mm thick area of each tile exceeding 0.11 sqm but not exceeding 0.18 Sqm, in floors over and including 15 mm thick screed bed in CM 1:6 as in floor etc set & jointed in neat cement slurry and pointed in coloured cement to match complete all as specified and directed. |
| 13 | S&F coloured Glazed ceramic tiles in vertical surface 450X 350X 7mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match including 10 mm thick rendring in CM 1:4 and complete all as specified and as directed. |
| 14 | M & L Green Marble work 18 to 20 mm thick (table rubbed and polished) in steps, jambs, pillars, windowcills, cooking platforms and like in 20 mm thick screed cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with marble shade of granite complete all as specifed and as directed. |
| 15 | M & L Makrana white Marble work 18 to 20mm thick (table rubbed and polished) in steps, jambs, pillars, windowcills, cooking platforms and like in 20cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with marble shade complete all as specifed and as directed. |
| 16 | M& L for Granite (of any type) work (table rubbed and polished) 18-20 mm thick in steps, jambs, pillars, window cills, cooking platforms and like in 20 mm thick screed cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite over 15 mm thick screed bed of CM (1:6) complte all as specified and as directed. |
| 17 | S&F non skid tiles, exterior grade, chequered/grooved pattern of size 600x600mm 8-10mm thick set and jointed in neat cement slurry and pointed in white/ coloured cement to match the shade as in floor,steps over and incl 15mm thick cement screed bed in CM 1:6 complete all as specified and as directed. |
| 18 | Demolition of cement concrete of any description and in any position not otherwise specifically provided for complete all as specifed and as directed. |
| 19 | M&L 25 mm thick PCC (1:2:4) type B-1 using 20 mm graded stone aggregate as in floor /roof surface finished rough and even to receive tiles complete all as specifed and as directed. |
| 20 | M&L for PCC 1:3:6 type C-2, (using 40mm graded stone aggregate) as in plinth protection laid in alternate panels 75mm thick finished even and smooth w/o using extra cement complete all as specifed and as directed. |
| 21 | Forming construction joints 30mm deep x 10mm wide filled with sealing compound grade 'A' complete all as specifed and as directed. |
| 22 | M&L precast cement concrete Block Masonary with solid blocks type C1 1:3:6 20mm graded stone aggregate exc 10 cm in width and setting in mortar 1:6 incl Demolition of Precast concrete block walling built in cement mortar complete all as specified and directed . |
| 23 | M&L PCC 1:2:4 type B1 (20mm graded aggregates) as coping, bed block, Haunching/ benching of drains/coving/ sides of any type of tiles etc and similar work complete all as specifed and as directed. |
| 24 | M & L for PCC 1:3:6 type C-2 using 40mm graded stone aggregate as in surface channels and drain complete all as specified and directed. |
| 25 | Extra for forming fair finished drain or channel 30 cm inner girth in cement concrete using extra cement incl forms , moulds ,mitred stopped ends etc. complete all as specifed and as directed. |
| 26 | Taking down cement plaster on brick or stone walls, etc. including raking out joints, hacking for key, scrubbing down with water, etc. complete all as specifed and as directed. |
| 27 | M & L 15 mm thick cement plaster on fair faces of brick work or concrete surface on wall in CM 1:4 using WPC as manufacture instructions finished fair and even w/o using extra cement complete i all as specified and directed. |
| 28 | M & L 15mm thick cement plaster on other than fair faces of brick work or concrete surface on wall in CM 1:6 finished fair and even complete w/o using extra cement all as specified and directed. |
| 29 | Supply only integral Water proofing compound complete all as specifed and as directed. |
| 30 | Taking down chowkhats or frames area exc 1.5 Sqm and not exc 4 Sqm each with shutter (without taking off shutter from frame) complete all as specifed and as directed. |
| 31 | Taking down chowkhats or frames area n exc 1.5 Sqm each with shutter (without taking off shutter from frame) complete all as specifed and as directed. |
| 32 | Providing and fixing factory made uPVC white colour Sliding window Three track made of extruded profiles with wall thickness of 2.3mm (+ -0.2mm). Window profile with hollow section with multi chamber. Frame (88mm x 52mm), sliding sash (42mm x 67mm). Sliding mesh Sash (42mm x 57mm) Sliding interlock (One vertical length in each shutters) (45.5mm x 28mm), Glazing bead (24.5mm x 16mm) will be miterd cut and fusion welded at all corners, including drilling of holes for fixing hardware and drainage of water etc., making arrangement for fixing of hardware. EPDM gasket, 1.2+ -0.2mm thick galvanised steel Frame (30mm x 18mm) 2 nos, sliding sash (30mm x 18mm), sliding mesh sash (26mm x 10mm) profile to be inserted in required profile, frame will be fixed to the wall with 8mm x 100mm long fasteners,Hardware [Touch Lock of zinc alloyed (white powder coated), steel roller system. Stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm and required accessories complete all as specifed and as directed.(Note: The unit rate quoted by contractor excludes cost of glass , wire mesh and includes all other connected accessories Net opening will be measured or payment purpose.) (a) Area exceeding 2.00 sqm each. |
| 33 | Providing and fixing factory made uPVC white colour casement (Openable) window/ventilator made of extruded profiles with wall thickness of 2.3mm ( + – 0.2mm). Window profile with hollow section with multi chamber, frame (60mm x 58mm), sash (60mm x 73mm), T profile (One vertical length in between two shutters) (60mm x 74mm), Glazing bead (35mm x 20mm) will be mitered cut and fusion welded at all corners, including drilling of holes for fixing hardware and drainage of water etc., making arrangement for fixing of hardware.EPDM gasket 1.2 +– 0.2mm thick, galvanized steel Frame (28mm x 21.5mm), sash (31mm x 27.5mm). T profile (27mm x 17mm) to be inserted in required profile, frame will be fixed to the wall with 8 mm x 100mm long fasteners. Hardware: [casement handle made of zinc alloyed (white powder coated), But Hinges of'zinc alloyed (white powder coated), transmission gear made of mild steel with multi point locking system] and 5mm thick glazing with selected quality glass complete all as specifed and as directed. (Note: The unit rate quoted by contractor excludes cost of glass and includes all other connected accessories. Net opening will be measured for payment purpose.)(a) Area not exceeding 1.00 sqm each |
| 34 | S&F SS wire cloth 0.36 mm nominal dia of wire and average width of aperture 1.40 mm and fixed with SS wire staples complete all as specifed and as directed. |
| 35 | S & F 3mm thick sheet glass ordinary quality and glazing with oil putty in square nexc. 0.5 sqm in each pane complete all as specifed and as directed. |
| 36 | All as per Item No 35 above but 3mm thick sheet glass ground or Obscured or frosted on one side and ditto complete all as specifed and as directed. |
| 37 | S& F Factory made extruded WPC (Wood Polymer Composite) Double Door Frame solid door/ window/ Ceosetory windows & other Frames/ Chowkhat of size 65 x 125 mm comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/ cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum comp ressive strength of 58 N/mm2 , modules of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/ moisture proof and fire retardantetc and fixed in position with MS hold fast/ lugs/SS dash fasteners of required dia and length complete all as specified and as per direction of Engineer-in-Charge. (M.S. hold fast/ lugs or SS dash fasteners shall be paid for separately). →Note: For WPC solid door/window frames,minus 5mm tolerance in dimension i.e.depth and width of profile shall be acceptable. Variation in profile dimensions on plus side shall be acceptable but no extra payment on this account shall be made complete all as specified and directed . |
| 38 | S& F Factory made extruded WPC (Wood Polymer Composite) single Door Frame solid door/ window/ Ceosetory windows & other Frames/ Chowkhat of size 65 x 100 mm comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/ cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum comp ressive strength of 58 N/mm2 , modules of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/ moisture proof and fire retardantetc and fixed in position with MS hold fast/ lugs/SS dash fasteners of required dia and length complete all as specified and as per direction of Engineer-in-Charge. (M.S. hold fast/ lugs or SS dash fasteners shall be paid for separately). →Note: For WPC solid door/window frames,minus 5mm tolerance in dimension i.e.depth and width of profile shall be acceptable. Variation in profile dimensions on plus side shall be acceptable but no extra payment on this account shall be made complete all as specified and directed . |
| 39 | S& F Factory made single extruded WPC (Wood Polymer Composite) solid flush door shutter of 30mm size prelaminated both sides comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm2 , modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws complete all as specified and all as per direction of Engineer-In-Charge. (Note: stainless steel butt hinges and necessary S S screws shall be paid separately |
| 40 | M&L 35mm thick factory made solid WPC (Wood plastic composit) gauged door shutter brown, single pieces minimum density of 600 kg/cum with wire mesh in any number of division with (Frame size bottom rail 200 to 250mm wide ,middele or lock rail rail 150mm to 250mm wide, Stiles, top and freeze rails 100 to 120 mm wide and glazing bar 75 mm wide, including stainless steel wire mesh shall be fixed with 15 mm MS Square tube and covered with PVC moulded bedding in side rails with screwing 8x28 heat metal zink coated screws can be remove or fix again of the shall be as per manufacture instructions complete all as specified and as directed. |
| 41 | S& F Factory made extruded WPC (Wood Polymer Composite) single Door Frame solid door/ window/ Ceosetory windows & other Frames/ Chowkhat of size 50 x 75 mm comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/ cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2 , modules of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/ moisture proof and fire retardantetc and fixed in position with MS hold fast/ lugs/SS dash fasteners of required dia and length complete all as specified and as per direction of Engineer-in-Charge. (M.S. hold fast/ lugs or SS dash fasteners shall be paid for separately). →Note: For WPC solid door/window frames,minus 5 mm tolerance in dimension i.e.depth and width of profile shall be acceptable. Variation in profile dimensions on plus side shall be acceptable but no extra payment on this account shall be made complete all as specified and directed . |
| 42 | S& F Factory made single extruded WPC (Wood Polymer Composite) solid flush door shutter both side laminated of 24mm size comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm2 , modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws, complete all as specified and all as per direction of Engineer-In-Charge. (Note: stainless steel butt hinges and necessary S S screws shall be paid separately |
| 43 | Providing and fixing Powder coated aluminium (minimum thickness of powder coating 50 micron) work for doors, windows, ventilators and partitions (Fixed portions) with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS:1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottomand sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing/ paneling, C.P. brass/ stainless steel screws, mortice lock in door, including all the necessary fittings for door and windows ( except glaas and wire mesh) complete as per architectural drawings complete all as specifed and as directed. |
| 44 | S & F butt hinges, medium weight, stainless steel and fixed, size of hinges 100mm complete all as specified and directed. |
| 45 | S&F 250mm long aluminium anosized sliding door bolt with hasp staple (bolt type) and fixing clips to sheet cast or extruded section of cast aluminium complete all as specified and directed. |
| 46 | S&F 150mm extruded aluminium alloy handles, fabricated type, complete all as specified and directed. |
| 47 | S&F 100mm extruded aluminium alloy handles, fabricated type, complete all as specified and directed. |
| 48 | S&F 100mm long aluminium anodized, barrel tower bolts of extruded section complete all as specified and directed |
| 49 | S&F 150mm long aluminium anodized, barrel tower bolts of extruded section complete all as specified and directed. |
| 50 | S&F 300mm mild steel ordinary rat tail rod pattern spring including roller and roller plate fixed to wooden/mild steel chowkhat complete all as specified and directed. |
| 51 | S&F 125 mm long aluminium alloy door stopper complete all as specified and directed. |
| 52 | S&F in repairs 20 mm dia fancy type SS Curtain rod fixed with SS bracket and lattoo to wall complete as sample approved all as specified and directed by Engr - in - charge. |
| 53 | M & L Preparation of new steel or iron surfaces of any description not otherwise described over 10 cm width or girth and applying two coats of synthetic enamel paint over one coat of red oxide primer complete all as specified and as directed. |
| 54 | M & L Preparation of old steel or iron surfaces of any description not otherwise described over 10 cm width or girth and applying one coats of synthetic enamel paint complete all as specified and as directed. |
| 55 | M&L for applying two coat exterior emulsion paint (weather coat of Berger or equivelent ) on newly plastered wall with airless electric sprayers over a coat of primer applied using airless electric sprayers over one coats of wall care putty of 1-1.5mm thickness prepared and sanded with electrically operated sanding machine. application to be done through the authorised applicator of manufacturer complete all as specified and directed. |
| 56 | M&L for complete removal of existing treatment using mechincal device and applying two coat exterior emulsion paint (weather coat of Berger or equivelent ) on old plastered wall with airless electric sprayers after prepearing old surface applied using airless electric sprayers over one coats of wall care putty of 1-1.5mm thickness prepared and sanded with electrically operated sanding machine. application to be done through the authorised applicator of manufacturer complete all as specified and directed. |
| 57 | M&L for applying two coat OBD on newly plastered wall with airless electric sprayers over a coat of primer applied using airless electric sprayers over one coats of wall care putty of 1-1.5mm thickness prepared and sanded with electrically operated sanding machine. application tobe done through the authorised applicator of manufacturer complete all as specified and directed. |
| 58 | M&L for complete removal of existing treatment using mechincal device and applying of two coat OBD on wall with airless electric sprayers over a coat of primer applied using airless electric sprayers over one coats of wall care putty of 1-1.5mm thickness prepared and sanded with electrically operated sanding machine. application tobe done through the authorised applicator of manufacturer complete all as specified and directed. |
| 59 | M & L for precast cement concrete 1:2:4 type B-1 using 20mm graded stone aggregate as in manhole cover, shelves, chajjas etc and set in CM 1:6 complete all as specified and directed. |
| 60 | S&F in repairs 25 mm thick boarding of 2nd class hardwood as in roof facia ,Planed one side, with butt joints and fixed with nails supplied and fixed complete all as specified and as directed. |
| 61 | S & F in repairs Table top vitreous china hand wash basin of shape as decided by engineer in charge snow white exclusive quality, incl waste pipe and waste coupling complete all as specified and directed. |
| 62 | S&F in repairs CP Bottle trap having minimum water seal of 25mm ,(Minimum weight 32mm-260gms) complete all as specified and as directed. |
| 63 | S& F in repairs CP BRASS SINGLE LEVER BASIN MIXER WITH 300mm EXTENDED BODY AND 600 mm BRAIDED CONNECTION pipe for mixing hot & cold water screwed down for iron pipe and fixed complete all as specified and directed. |
| 64 | S&F in repairs 600mm long PVC Connection 15mm size with PTMT nuts complete all as specified and directed. |
| 65 | S&F in repairs half stall Vitreous China urinals, bowl type (back or corner wall type), complete including providing and fixing plugs, bedding urinal against wall in cement mortar 1:2, securing urinal to plugs with and including 60mm long brass screws, pointing around urinal back in cement and waste pipe; fixing automatic flushing cistern with brackets, flush pipe, grating and Union for discharge pipe, (Exclusive of fixing supply pipe to flushing cistern, trap and waste pipe) complete all as specified and as directed. |
| 66 | S&F in repairs Urinal spreader of PTMT any colour for fixing with 15 mm dia pipe. (Minimum weight 60gms) complete all as specified and as directed. |
| 67 | S&F in repairs Brass chromium plated Tubular towel ring , 20mm dia, D type , 60cm long between falnges complete all as specified and directed. |
| 68 | S&F in repairs vitreous china squatting pan \\"Orissa\\" pattern size 580mmx440mm white with integral foot rests including trap set in and including concrete, connection to trap, and to flushing pipe, anti syphonage pipe, etc complete making good to floors and complete all as specified and as directed. |
| 69 | S&F in repairs viterous China wash down water closet (pedestal pattern) complete, incl toilet paper holder, Plastic water closet seat, black/white, closed pattern with flat bottom, and cover and mild steel chromium plated or aluminised hinging device, health faucet jet (excluding flushing cistern and flushing pipe) complete all as specified and as directed. |
| 70 | S&F in repairs 10 litre capacity PVC valveless, Syphonic action type, fluhing cistern low level,white with inlet ball valve, float and handle complete all as specified and directed. |
| 71 | S & F in repairs Toilet paper holder with flap guard type of stainless steel Complete all asspecified and directed. |
| 72 | S & F in repairs soap dish of stainless steel complete all as specified and directed. |
| 73 | M&L for 5 mm thick Looking mirror decorative type with moulded edgesof any size mounted on wall with the help of stainless steel brackets complete all as specified and as directed. |
| 74 | S&F in repairs 1000 liters capacity rotational moulded polyethylene water storage tank (Cylindrical vertical with close top) hoisted and fixed in position including 20mm bore dia of pipe Ball valves high pressure of PTMT with epoxy coated aluminium rod & high density plastic ball screwed for iron pipe and fixed (minimum weight 20mm -210 gms ) incl connections complete all as specified and as directed. |
| 75 | S&F in repairs C P Hand shower (health faucet) 1 mtr PVC tube with wall hook complete for EWC, complete all as specified and as directed. |
| 76 | S&F IN REPAIRS corner glass shelf assembly of 3, having sizes 300 X 300, 225 X 225 and 150 X 150 consisting of 5.5mm thick glass sheet with aluminium alloy brackets and guard complete all as specified and as directed. |
| 77 | S&F PVC (SWR) floor trap with CP grating including jointing to waste pipe 75 mm bore outlet with solvent cement complete all as specified and as directed. |
| 78 | S&F PVC (SWR) bends 75 mm bore with or with out oval excess door complete all as specified and as directed. |
| 79 | S&F PVC (SWR) bends 110 mm bore with or with out oval excess door complete all as specified and as directed. |
| 80 | S&F 110mm bore PVC (SWR) junction single (Single T) equal or unequal complete all as specified and as directed. |
| 81 | S&F 110 mm dia PVC (SWR) pipes single socketed in any length with rubber ring joints, laid in trenches or in floors etc complete all as specified and as directed. |
| 82 | S&F 75 mm dia PVC (SWR) pipes single socketed in any length with rubber ring joints fixed laid in trenches or in floors etc complete all as specified and as directed. |
| 83 | Cutting chases in brick wall, stone concrete block or slab walls, pining in, making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings ,steps,cills sunshades, shelves , lintels, etc and cutting chases for concealed water tubing and making good , cutting n'exc 10 cm girth complete all as specified and directed. |
| 84 | S&F 15 mm bore medium grade galvanised steel tubing with all fittings and fixed complete to walls and ceiling or laid in floor including taking down complete all as specified and directed. |
| 85 | S&F in repairs 20 mm bore medium grade galvanised steel tubing with all fittings and fixed complete to walls and ceiling or laid in floor including taking down complete all as specified and directed. |
| 86 | S&F in repair 15 mm bore dia Stop/angle valves fancy type Chromium plated screwed down , high pressure , with capston head, screwed both ends for iron pipe or for unions complete all as specified and directed. |
| 87 | S&F in repair 15mm bore fancy type, CP Brass Bib taps with capston head, screwed down, screwed for iron pipe or for brass ferrule and fixed complete all as specified and directed . |
| 88 | S&F in repair 15mm bore fancy type, CP Brass Two way Bib taps with capston head, screwed down, screwed for iron pipe or for brass ferrule and fixed complete all as specified and directed . |
| 89 | S&F 15 mm dia Gun-metal, globe or gate valves,with iron wheel head, screwed both ends for iron pipe and fixed complete all as specified and as directed. |
| 90 | Do - all as per above item No 89 above but 20 mm bore complete all as specified and as directed. |
| 91 | Taking down carefully Aluminium/copper wiring of any size (for light, fan, socket or power etc complete) ( fittings such as switches, sockets, ceiling roses, pendent holders regulators, tube lights etc to be measured and paid separately) and making good disturbed surfaces of wall, roof etc to match with existing surface complete all as specified and as directed. |
| 92 | M & L point wiring in replacement for Modular fittings for one light point/ fan/ bell/ 5Amps socket out let (independent) point controlled by one, one way modular switch with 1.5 sqmm size, PVC insulated and unsheathed 1100volts grade, single core stranded (multistrand) copper conductor (FRLSH) PVC cable drawn into & including medium grade PVC conduit (not less than 20mm outer dia) with all fittings and accessories fixed concealed (including chase cutting in brick/ stone masonry walls for fixing conduit and plastering and whitewash/colouring the external surface and matching the same with existing surface) including modular metal flush box for mounting modular fittings and covered with modular cover plate with frame and cup washers including one continuous run of PVC insulated (green colour) 1.5 Sqmm multistranded copper conductor cable earth wire and connected to earth dolly complete all as specified and as directed.Note: Conductor copper Wire will be drawn in conduit as per SSR part-I PARA: 19.125 Conduit and Conduit fitting table B. |
| 93 | All as per item No. 92 here in before but for One modular socket outlet 3 pin 6 amps controlled by one switch on same board complete all as specified and as directed. |
| 94 | All as per item No. 92 here in before but for One modular socket outlet 3 pin 6 amps controlled by one switch on independent board complete all as specified and as directed. |
| 95 | All as per item No. 92 here in before but for wiring with 2.5sqmm copper wire (FRLSH) PVC and 2.5 sqmm earth wire for modular socket outlet 5 pin 16 amps on independent board complete all as specified and as directed. |
| 96 | S&F in replacement for submain wiring with two single core PVC insulated flexible copper conductor multistranded cable (FRLSH) of size 6 Sqmm with proper color coding and one single core PVC insulated flexible copper conductor multistranded cable green colour of size 6 Sqmm as earth lead in & including concealed PVC conduit medium grade 25 mm dia or higher cutting chases to walls for laying conduit and making good the disturbed wall surfaces to match with existing specification all as required at site complete all as specified and as directed.Note: 1. Conductor copper Wire will be drawn in conduit as per SSR part-I PARA: 19.125 Conduit and Conduit fitting table B.2. Two runs of 6 Sqmm (2x6sqmm ) ,one run of 6 Sqmm (1x6 sqmm ) cable and one metre of conduit (25 mm dia) will be measured as one unit. |
| 97 | S&F in replacement for submain wiring with Four single core PVC insulated flexible copper conductor multistranded cable (FRLSH) of size 10 Sqmm with proper color coding and one single core PVC insulated flexible copper conductor multistranded cable green colour of size 10 Sqmm as earth lead in & including concealed PVC conduit medium grade 32 mm dia cutting chases to walls for laying conduit and making good the disturbed wall surfaces to match with existing specification all as required at site complete all as specified and as directed.Note: 1. Conductor copper Wire will be drawn in conduit as per SSR part-I PARA: 19.125 Conduit and Conduit fitting table B.2. Four runs of 10 Sqmm (4x10sqmm ) ,one run of 10 Sqmm (1x10 sqmm ) cable and one metre of conduit (32 mm dia) will be measured as one unit. |
| 98 | S&F in replacement of switch modular type single pole one way 1 module 6 amps 240 volts complete all as specified and as directed. |
| 99 | S&F in replacement of switch modular type one way 1 module 16 amps 230 Volts complete all as specified and as directed. |
| 100 | S&F in replacement of socket 6 amps modular type 2/3 pin combined 2 module , 230 volts complete all as specified and as directed. |
| 101 | S&F in replacement of socket modular type , 2/3 pin, 6 and 16 amps combined 2 module, 230 volts complete all as specified and as directed. |
| 102 | S&F in replacement for ceiling rose surface bakelite 3 terminals complete all as specified and as directed. |
| 103 | S&F in replacement of Modular type Electronic fan regulator stepped type,two module with five step 240 volts,100Watt suitable for 1200/1400 mm sweep AC ceiling fan complete, all as directed by Engineer in charge. |
| 104 | S&F in replacement of bell push AC SP 240 volts flush type 5/6 Amps, single pole one way complete as all specified and directed. |
| 105 | S&F in replacement of bell electric multi music type / AC SP 240 Volts complete all as specified and as directed. |
| 106 | Taking down Celing Fan any Sweep from the exsisting site and keep safe and under custody and complete cleaning, Oiling ,Greasing ,including replacement of capacitor , bearing and nut washet bolt and clamps of fan and Refixing fan as existing location and connection to celing rose with copper wire twin core complete all as specified and as directed. |
| 107 | S&F of Tube light fitting integrated type suitable for LED 20 W(4 feet) efficacy min 100 lumens/watt, indoor decorative LED batten complete with Aluminium housing with surge protection and high voltage protection and all accessories pre wired and making connection with cord flexible copper cable of suitable size from ceiling rose to PVC connection to light fitting complete all as specified and as directed. |
| 108 | S&F of Tube light fitting integrated type suitable for LED 20 W(4 feet) in build PIR occupancy sensor based, to reduce power consumption efficacy min 100 lumens/watt, indoor decorative LED batten complete with Aluminium housing with surge protection and high voltage protection and all accessories pre wired and making connection with cord flexible copper cable of suitable size from ceiling rose to PVC connection to light fitting complete all as specified and as directed. |
| 109 | Refixing the serviceable LED Light fitting retrieved from item no-1, LED 20 W(4 feet) with all accessories wired and making connection with cord flexible copper cable of suitable size from ceiling rose to PVC connection to light fitting complete all as specified and as directed. |
| 110 | S&F in replacement of Tube light fitting integrated type suitable for LED 10 W (2 feet) efficacy min 100 lumens/watt, indoor decorative LED batten complete with Aluminium housing with surge protection and high voltage protection andall accessories pre wired and making connection with cord flexible copper cable of suitable size from ceiling rose to PVC connection to light fitting complete all as specified and as directed. |
| 111 | S&F in replacement of LED light fitting recess mounted min 32/36 Watt, 6500 K 2' x 2' with surge protection and high voltage protection up to 380 VAC and all accessories suitable for amstrong/grid/POP ceiling complete with integrated electronic driver and making electrical connection properly complete all as specified and as directed. |
| 112 | Refixing the serviceable LED Light fitting retrieved from item no-1, LED light fitting recess mounted min 32/36 Watt, 6500 K 2' x 2' and all accessories suitable for amstrong/grid/POP ceiling complete with integrated electronic driver and making electrical connection properly complete all as specified and as directed. |
| 113 | S&F in replacement of LED bulk head fitting with opal diffuser min 10 Watt, 6500 K, IP-65, with Aluminium housing of efficient heat dissipation and integrated electronic driver with surge protection and high voltage protection complete connecting electrically complete all as specified and as directed. |
| 114 | Supply and fixing LED street light fitting 60 Watt 230 V AC, in multiple optics,Outdoor type with high pressure die cast aluminum housing, IP-65, with 4 KV inbuild surge protection driver and heat resistant complete with driver, fixing the same by GI pipe medium grade minimum 25 mm dia bore pipe with two nos FI clamps of 40X4 mm duly painted and suitable size of nut and bolts etc and making poper electric connection with three core flexible copper wire complete all as specified and as directed. |
| 115 | S & F distribution board iron clad, double door with IP-43 1K-09 protection suitable for MCCB as incommer and MCB TP as outgoing 415 Volts 3 phase 50 Hz, VTPN DB 4 way, complete with appropriate size copper bus bar 250 A and neutral link, complete with one MCCB 4 pole 415 Volts 160 Amps rating with rupturing cap 25 KA of the same make as of distribution board & with MCBs of required size making connection with thimbles & including cutting chases to wall for fixing DB and making good the disturbed wall surface all as required at site complete all as specified and as directed. |
| 116 | S&F in replacement of TPN DB, 4 Way, as per IS-8523, IP-42 protection, universal mounting with 200A copper bus bar with neutral bar, earth bar and cable ties for cable management, top and bottom removable gland plate suitable for MCB TPN as incomer and MCB TPN/MCBs as outgoing, with and including provision for MCCB/MCBs & making necessary electrical connection for Incoming & outgoing cables, with copper lugs, crimped with crimping tool complete all as specified and as directed. |
| 117 | S&F in Repalcement of MCB C- Curve of four pole TPN, 415 Volts, 100 Amp ultimate breaking capacity (Icu)-10 KA complete all as specified and as directed. |
| 118 | S&F in replacement of sheet metal enclosure MCB distribution board, double door with IP-43 IK-09 protection with metal door single phase 240 volts 12 way, including suitable size copper bus bar and neutral link fixed flush in wall including chases wall for fixing DB and making good distributed wall surfaces to match with existing specification complete all as specified and as directed. |
| 119 | S&F in replacement of sheet metal enclosure MCB distribution board, double door with IP-43 IK-09 protection with metal door single phase 240 volts 8 way, including suitable size copper bus bar and neutral link fixed flush in wall including chases wall for fixing DB and making good distributed wall surfaces to match with existing specification complete all as specified and as directed. |
| 120 | S&F in replacement of Amp rating 240,10 KA C- curve MCB SP of 6 to 32 Amp with connection testing and commisioning complete all as specified and as directed. |
| 121 | S&F in replacement of Amp rating 240,10 KA C- curve MCB DP SPN of 40-63 Amp with connection testing and commisioning complete all as specified and as directed. |
| 122 | M&L for earthing complete with galvanised steel, earth plate electrode 600x600mm x 6mm thick burried directly in ground verticaly (earth pit not less than 2.25 mtrs below ground level ) with top edge of the plate not less than 1.5 mtrs below normal ground level connected to galvanised earth lead wire 4 mm dia by means of bolts, nuts, check nuts and washers of galvanised iron/steel all as shown in electrical plate No 3 on page 497 of MES schedule 2009 part - I connected to main switch board/main DBs/earthing test point including all necessary excavation and earth work in hard/dense soil common salt and charcoal dust mixed and packed 150mm thick all round the GI earth plate, watering pipe 20mm dia GI medium grade. GI sheet 0.63 mm thick funnel, wire gauge, 50mm thick RCC cover in PCC 1:2:4 type B1 duly reinforced with MS round bars 6mm dia @ 150c/c both ways and pit/chamber in PCC 1:3:6 type C1 with suitable lifting handle to cover, GI protection pipe 15mm dia light grade up to 7.5mtr from electrode GI pipe to be fixed with complete all as specified and directed.Note :- (i) Earth lead beyond 7.5 mtr from electrode to earth terminal point/main switch & GI pipe light grade 15mm dia for protection against mechanical damage to lead shall be measured separately. (ii) On testing after completion if desired earth resistance is not obtained, the earthing will be redone at no extra cost. |
| 123 | Supply and fix Exhaust fan , steel body AC single phase 230 V of size 300 mm (12'') sweep single phase 230 V 50 Hz AC 1400 RPM energy saving, heavy duty motor copper wounded with die cast aluminium rotor mounted on two ball bearing complete with louvrs shutter including making hole of suitable size and making good disturbed surface (including making hole and plasterng, nacessary brickwork and distemparing to match with existing) connecting with 3 core copper cable to ceiling rose complete all as specified and as directed. Please Enable Macros to View BoQ information |
