|
| 1 | Surface dressing not exceeding 30 cm deep and averaging 15 cm deep and getting out in hard/dense soil complete all as specified and directed. |
| 2 | Removing excavated material/soils n exc. 50m and depositing where directed at a level n exc. 1.5m above the starting point complete all as specified and directed |
| 3 | M&L for Brickwork with old size subclass 'B' bricks, straight or curved on plan exc 6m mean radius, built in CM (1:6) complete all as specified and directed. |
| 4 | M& L for moorum/red bajri filling in floors or pavings, laid in layers n.exe. 15cm thick, spread, levelled and rammed incl watering. |
| 5 | M & L for hardcore of gauge n exc. 63mm, deposited, spread and levelled in layers n exc. 15 cm thick, watered and rammed to a true surface |
| 6 | M & L 100 mm thick PCC 1:4:8 type D-2 using 40 mm graded stone aggregate as in sub base for flooring complete all as specified and directed. |
| 7 | M & L 40 mm thick PCC 1:2:4 type B-1, (20 mm graded aggregate) as in base for flooring complete all as specified and directed. |
| 8 | M & L PCC 1:4:8 type D-2 using 40 mm graded stone aggregate as in foundation, complete all as specified and directed. |
| 9 | M&L for 15 mm thick rendering on brick work or concrete surfaces of internal wall in cement mortar 1:4 surface finished Even and Smooth without using Extra Cement complete all as specified and as directed. |
| 10 | M & L Preparation of newly plastered surface and apply two coat of cement base paint over a coat of Priming paint complete all as specified and directed. |
| 11 | M&L for Excavating in post holes (or similar holes) each n exc 0.5 cu. m, getting out, returning, filling in & raming earth/ broken rubble mixed with earth around, in layers n. exc. 25cm, watering, & removing surplus soil to a distance n exc 50m & making good surface in soft/loose soil complete all as specified and as directed. |
| 12 | M&L for Plain cement concrete type B2 (1:2:4) using 40 mm graded crushed stone aggregate) as in foundations fillings and mass concrete or embeding in fencing post complete all as specified and as directed. |
| 13 | S&F mild steel rolled sections as in roof trusses (framed), trussed purlins crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle channel or flat sections) including distance pieces, cleats etc. ( Fe 410-W (Gde E-250) quality A) complete all as spd and directed. |
| 14 | M & L for mild steel Steel work in tubular trusses and pole including special shaped washer etc. complete using ERW or induction butt weldedtubes conforming to I. S.1161- 1979 grade St.-240 complete all as specified and directed |
| 15 | S&F Plates (plain or chequered) channels. Square cut or notched (ordinary and counter sunk) forming holes, without any attachment using Fe 410 -W (Gde- E- 250) quality- B, complete all as spd and directed. |
| 16 | M & L for new steel Surfaces of any description, not otherwise descri-bed, over 10cm width or girth of old surfaces applying Two coat of synthetic enamel paint over a coat of red oxide complete all as specified and directed |
| 17 | S&F Pre-painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50mm of an colour having tensile strength of 550Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified |
| 18 | S&F Pre-painted galvalume aluminium zinc coating GI based plain steel sheet 0.50mm of an colour having tensile strength of 550Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified |
| 19 | Returning, filling in, including spreading, levelling, watering and well ramming in layers not exc 25 cm in soft/loose soil, complete all as specified |
| 20 | M&L 75 mm thick PCC 1:3:6 type C2 using 40 mm graded stone aggregate as in plinth protection/foot path etc. |
| 21 | Excavating in trenches, not exc 1.5m wide and not exc 1.5m in depth; for foundation etc. or for shafts, wells, cesspits, manholes, pier holes etc. not exc 10 sq. m on plan and not exc 1.5m in depth and getting out in soft/loose soil, complete all as specified |
| 22 | M&L for Surface excavation n.exc 15cm deep and averaging 15cm deep in soft/loose soil complete all as specified and as directed. |
| 23 | M & L for providing and laying 60mm thick factory made chamfered edge cement concrete paver block of M-35 grade with approved colour,design & pattern as in footparth, parks,lawns, drive ways or light traffic parking etc.,of required strength, thickness & size/shape, made by table vibratory method using PU mould, laid in required colour & pattern over and including 50mm thick compacted bed of fine sand, compacting and proper embedding/ laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with sand and cutting of paver blocks as per required size and pattern, finishing and sweeping extra sand; |
| 24 | M&L for Rendering 10mm thick on fair faces of brick work or concrete surfaces in CM (1:6) finished even & smooth (without using extra lime or cement) complete all as specified and as directed. |
| 25 | M&L for Applying two coats of cement base paint, white or tinted on new wall surface including preparation of surface complete all as specified and as directed. |
| 26 | M & L Providing, cement concrete (1:2:4) type B-1(using 20 mm graded agg) in roof kerbs or mud stops, rounded or chamfered on edges in lintels upto 1.5m clear span, cills, steps; seismic and other similar bands, plinth courses, string courses, lacing courses, parapets and railings upto 60 cm in height, copings, kneelers, apex stones, bed plates, kerbs not provided for in Item 04028, water troughs and the like including weathering, slightly rounded or chamfered angles and throating, complete all as specified and directed. |
| 27 | M&L for Applying two coats of synthetic enamel paint on steel & iron surfaces of any description, not otherwise, described, over 10cm width or girth including preparation of new surface & applying one coat of red oxide, zinc chrome complete all as specified and as directed. |
| 28 | M&L Precast cement concrete type B1 (1:2:4) using 20 mm graded aggregate set in CM(1:4) in landings, cover slabs (for manholes etc.) chullah hoods, chajjas, water troughs, mangers, shelves and similar articles with plain faces complete all as specified and as directed. |
| 29 | M&L Mild steel round bars 6mm to 8mm dia,cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends & binding with & including mild steel wire (annealed) not less than 0.9mmdia or securing with clips quality conforming to GD-I. IS-432 (Part I) complete all as specified and as directed. |
| 30 | Notes :- Amount of Credit Schedule for Schedule 'A' Part-ll shall be deducted from total quoted amount of BOQ to arrive at the contract sum Please Enable Macros to View BoQ information |
