|
| 1 | Earth work Excavation in ordinary soil in F&P within intial lead and lift including rough dressing and levelling the ground etc. complete. |
| 2 | Supplying and filling F&P with river sand with well watering and ramming etc. complete. |
| 3 | Supplying all materials, labour, T&P and providing Cement Concrete (1:3:6) using 4 cm size CBHG metal etc. complete. |
| 4 | Supplying all materials, labour, T&P and providing Flyash brick masonary in cement mortar (1:6) in F&P etc. complete. |
| 5 | Supplying all materials, labour, T&P and providing RCC M(25)using 12mm size CBHG chips etc. complete. |
| 6 | Supplying all materials, labour, T&P and providing Flyash brick masonary in cement mortar (1:6) inSuperstructure etc. complete. |
| 7 | Providing 12 mm thick CP(1:6) to out side smooth surface etc. complete. |
| 8 | Providing 16 mm thick CP(1:6) to in side smmoth surface etc. complete. |
| 9 | Providing 6 mm thick CP(1:4) to smooth surface etc. complete. |
| 10 | One coat cement wash to inside and out side smooth surface with all cost of labour, T&P , materials etc. complete. |
| 11 | Supplying all materials, labour, T&P for applying two coats of weather coat seal coat with primer over the out side and inside wall with well, watering and curing etc. complete. |
| 12 | G.I. Grill gate,Door , shutter made out of G.I.flat angle, square bar painted with red oxide primer as per the design approved . |
| 13 | Supplying all materials, labour, T&P and providing Reinforced Cement Concrete (1:1.5:3) using 12mm size BHGCB chips including centering and shuttering etc. complete. |
| 14 | Supplying, fitting & placing uncoated HYSD reinforcement including cutting, bending,binding & placing the steel rods as per drawing & technical specifications with cost of binding wire 18 to 20 gauges, etc., complete. |
| 15 | Rigid & Smooth, Centring & shuttering for RCC/CC work etc. complete.col base,GB |
| 16 | Rigid & Smooth, Centring & shuttering for RCC/CC work etc. complete.slab |
| 17 | Rigid & Smooth, Centring & shuttering for RCC/CC work etc. complete.col,beam |
| 18 | Supplying of all materials labour, T&P for providing 25mm.thick Grading concrete (1:2:2) by using 12mm Chips (C.B) to roof slab with water proof |
| 19 | Supplying all materials labour & T&P for constructing of brick masonry inspection chambers including cleaning of existing choked and damaged Inspection through sweepers dismantling and removal of old and damaged brick masonry work completely giving temporary chokes and when necessary till completion earth work in excavation in all kinds of soil, K.B. brick work in C.M. (1:5) with K.B. bricks having crushing strength not less than 75kg/cm2, 12mm thick cement plaster in C.M. (1:3) for both inside and outside of brick masonry work with neat cement punning on Top and inside surface area including benching and channelling work with C.C. (1:2:4) with 12mm Hard granite chips of requisite quantity and then plastering with C.M. (1:3) over it and then smooth finish with neat cement punning including cost of 80mm thick R.C.C. pre cast slab etc. all complete as per approved P.H.E.D. specification and direction of Engineer-in-charge. (750mm x 750mm x 450mm deep) |
| 20 | Providing, fitting, fixing P.V.C SWR pipe of standard manufactures, including all jointing, earthwork in excavation of trenches in all kinds of soil up to a depth of 0.9mtr. and refilling the trench in 0.3mtr. layers duly watered and rammed or fixing to walls with supply of naiks, bobbings, wall plugs all complete as per the PHD specification and the direction of the Engineer-in-charge. 110mm dia PVC SWR pipe S/S |
| 21 | 110mm dia PVC single junction |
| 22 | 110 mm Plain Bend 45 degree |
| 23 | 110mm dia P.V.C. SWR Cowl |
| 24 | Fixing KOTA tiles in floors, treads or steps and landing over 20mm bed of C:M (1:4) jointed with neat cement slurry mixed with pigment to match the shade of the tiles including rubbing and polishing complete |
| 25 | Fixing KOTA tiles in dados, skirting and risers of steps on 12mm C:P (1:3) jointed with neat cement slurry mixed with pigment to match the shade of the tiles including rubbing etc complete |
| 26 | Providing and Laying Factory made Chamfered edge Cement Concrete Paver Blocks 80mm thick ness of required strength, thickness & size/shape made by table Vibratory method , to attain superior smoth finish using PU or Equivalent moulds ,Laid in required gray colour and Pattern over 50mm thick Compacted bed of coarse sand , copmacting and proper embedding / laying of interlocking Paver Blocks into the sand bedding layer through vibratory compaction by using plate vibrator, Filling joints with Fine sand and cutting of Paver blocks as per required |
| 27 | Painting Two coats of weather coat over one coat of primer including painting charges of painter for decorative painting as per direction of Department Please Enable Macros to View BoQ information |
