|
| 1 | Earth work in hard soil or gravelly soil within 50m. Initial lead and 1.5m initial lift including rough dressing and breaking clods to maximum 5cm to 7cm and laying in layers not exceeding 0.3m in depth and as per the direction of the Engineer-in-charge. |
| 2 | Supply & Filling in Foundation and Plinth with excavated materials including watering and ramming as directed by Engineer-in- charge. |
| 3 | Supply & Filling in Foundation and Plinth with sand watered and rammed. |
| 4 | Plain Cement concrete (1: 4: 8) with 40 mm size hard granite metal. |
| 5 | Plain Cement Concrete work in floor and drain base slab of M-15 grade with 20mm & down grade crusher broken hard Granite chips including hoisting & laying with cost of all labour, materials with all taxes, lead, T & P etc all complete . |
| 6 | R.C.C. works (M-25) in foundation, footing, beams, plinth band, footing, base of columns, lintels, roofs, chhajas, mass concrete etc. using 10 mm & 20 mm size black hard granite crusher broken chips including hoisting, lowering, laying and compacting, watering, curing for 28 days, including all cost, conveyances, royalties and taxes of all materials and cost of labour with T & P required for the work etc. all complete in all respect but excluding cost of Steel and labour charges for bending and binding as per the Direction of the Engineer in charge. GROUND FLOOR |
| 7 | FIRST FLOOR |
| 8 | HEADROOM |
| 9 | Rigid and smooth centering and shuttering for R.C.C. works including false works and dismantling them after casting including cost of materials complete. FOOTINGS |
| 10 | COLUMNS |
| 11 | COLUMNS FF |
| 12 | Headroom-Columns |
| 13 | PLINTH BEAM |
| 14 | LINTEL BEAMS |
| 15 | LINTEL BEAMS FF |
| 16 | Headroom Lintels |
| 17 | ROOF BEAMS |
| 18 | ROOF BEAMS FF |
| 19 | Headroom Beams |
| 20 | ROOF SLAB, LANDING SLABS |
| 21 | ROOF SLAB, LANDING SLABS FF |
| 22 | Headroom Slab |
| 23 | STAIRCASE EXCLUDING LANDING |
| 24 | STAIRCASE EXCLUDING LANDING FF |
| 25 | Supplying, fitting and placing uncoated HYSD bar reinforcement complete as per drawing and technicalspecifications. GF+ST+BW+DRAIN |
| 26 | Fly Ash. Brick masonry using Fly Ash. Bricks in Foundation & Plinth, having crushing strength not less than 75Kg. / cm2 in cement mortar (1:6) after immersing the brick for six hours in water before use including splays, cutting circular moulding, corbelling, chamfering and similar such type of works, watering & curing including cost, conveyances, royalties taxes of all materials and cost of all labour with T&P required for the work etc. all complete in all respect as per the Direction of Engineer in charge. FOUNDATION & PLINTH |
| 27 | Fly Ash. Brick masonry using Fly Ash. Bricks in Superstructure , having crushing strength not less than 75Kg. / cm2 in cement mortar (1:4) after immersing the brick for six hours in water before use including splays, cutting circular moulding, corbelling, chamfering and similar such type of works, watering & curing including cost, conveyances, royalties taxes of all materials and cost of all labour with T&P required for the work etc. all complete in all respect as per the Direction of Engineer in charge. GROUND FLOOR WALLS |
| 28 | 12mm thick cement plaster (1:6) over brick masonary after racking out the joints watering and curing etc. complete with cost, conveyance royalties and taxes of all materials & all labour with T & P required for the work etc. all complete in all respect as per the Direction of the Engineer in charge. GROUND FLOOR- INT. WALLS |
| 29 | 16mm thick cement plaster (1:6) over brick walls in all floors after racking out joints including watering & curing etc. complete with cost, conveyance royalties & taxes of all materials & cost of all labour with T & P required for the work etc. all complete in all respect as per the Direction of the Engineer in charge. GROUND FLOOR- EXTERNAL WALLS |
| 30 | 6 mm thick cement plaster (1:4) over RCC surfaces of Ceiling in all floors after racking out joints including watering & curing etc. complete with cost, conveyance royalties & taxes of all materials & cost of all labour with T & P required for the work etc. all complete in all respect as per the Direction of the Engineer in charge. GROUND FLOOR - CEILING |
| 31 | Supplying, fitting and fixing vitrifed tile of premium grade in floors of size 600mm x 600mm of approved make conforming to IS: 15622 laid on 20 mm thick cement mortar (1:4) and filling joints with white cement of approved quality including cost of all materials, labour, T&P atc. required for the work all complete as per direction of Engineer-in-Charge. GROUND FLOOR |
| 32 | FIRST FLOOR |
| 33 | HEAD ROOM, MACHINE ROOMS |
| 34 | Supplying, fitting & fixing Tiles in floors , treads or steps and landing on 25 mm thick bed of cement mortar (1:1) (1 cement : 1 course sand) jointed with neat cement slurry mixed with pigments to match the shades of the tiles including rubbing and polishing complete including cost of all materials, labour T&P and conveyence etc required for the work all complete as per direction of the Engineer-in-charge. IN BACK LANDSCAPED AREA |
| 35 | Supplying, fitting and fixing tiles in dados, skirting and risers of steps on 12mm thick cement paster (1:3) jointed with neat cement slurry mixed with pigment to match the shades of the tiles including rubbing and polishing including cost of precast tiles, labour T&P,Conveyence etc . complete required for the work as per the direction of engineer-in-charge .VITRIFIED TILES GROUND FLOOR |
| 36 | GROUND FLOOR- INT. WALL FACES |
| 37 | Priming surface of walls with 1 coat of Wall Cement primer (Water Bound) including cost of scaffolding staging charges with cost of all materials labour T & P etc. as per direction of Engineer -In -charge. GROUND FLOOR- INT. WALL FACES |
| 38 | GROUND FLOOR- EXTERIOR WALL FACES |
| 39 | GROUND FLOOR- EXTERIOR. WALL FACES |
| 40 | Wall painting 2 coats with Weather Coat of approved shade on new work to give an even shade including the cost of paint, including cost of scaffolding staging charges with cost of all materials, labour, T & P etc. as per direction of Engineer -In -charge. GROUND FLOOR- EXTERIOR. WALL FACES |
| 41 | Supplying , fitting and fixing of two track UPVC sliding window of approved make with 6mm thick glass of approved quality complete with frame, shutters and all fitting and fixtures. GROUND FLOOR- WINDOWS |
| 42 | Supplying , fitting and fixing of openable UPVC doors with door frame of approved make with 6mm thick glass of approved quality complete with frame, shutters and all fitting and fixtures. GROUND FLOOR- DOORS |
| 43 | Providing and fixing in position collapsible steel shutters of approved design with vertical channels 20 x 10 x 2 mm and braced with flat iron diagonals 20 x 5mm size, with top and bottom rail of T-iron 40x40x6mm, with 40 mm dia steel pulleys, complete with bolts, nuts, locking arrangement, stoppers, handles etc. all complete, including cost of all materials, labour, T&P as per direction of Engineer-in-charge. COLLAPSIBLE GATE |
| 44 | Priming surface of M.S. Works with 1 coat of Red Oxide Primer including cost of scaffolding staging charges with cost of all materials, labour, T & P etc. as per direction of Engineer -In -charge.COLLAPSIBLE GATE |
| 45 | Painting two coats with approved Enamel Paint including cost of scaffolding staging charges with cost of all materials, labour, T & P etc. as per direction of Engineer -In -charge. COLLAPSIBLE GATE |
| 46 | Supplying, fitting and fixing of 5.5 mm thick hexagoanal Aluminum jally in windows as single groove, double groove and tapered clip as horizontal and vertical members for fixing of aluminum jally and jointing angle conforming to standard Aluminium sections etc. complete. |
| 47 | Wall Painting one Coat with Plastic Emulsion Paint of approved shade on new work to give an even shade including cost, conveyence and taxes all materials including cost of all labour and T & P etc. required for new work complete in all respect as per the Direction of the Engineer in charge. FF |
| 48 | Additional lift |
| 49 | Cement Concrete ( 1 : 2 : 4 ) with 12mm size HG chips all complete |
| 50 | Fitting & fixing of M.S. Step Iron built in wall complete. |
| 51 | Commissioning of Septic tank with charge full water. |
| 52 | Providing and fixing in position Mild Steel boundary wall railing all complete, including cost of all materials, labour, T&P as per direction of Engineer-in-charge.BWALL |
| 53 | Priming surface of M.S. Works with 1 coat of Red Oxide Primer including cost of scaffolding staging charges with cost of all materials, labour, T & P etc. as per direction of Engineer -In -charge.BW |
| 54 | Painting two coats with approved Enamel Paint including cost of scaffolding staging charges with cost of all materials, labour, T & P etc. as per direction of Engineer -In -charge.DRAIN |
| 55 | Supplying and fixing Colour Coated G.C.I. Sheet (0.4mm THK.) of TATA BLUESCOPE DURASHINE RED COLOR in roof drilling hole in wind ties including fixing of ridges valleys wind ties etc. ,including cost of fitting, conveyances, T&P, etc. |
| 56 | Supplying, hoisting joists and trusses of grade E350 and placing in position including all costs complete, as per direction of Engineer-in-charge. |
| 57 | Supply, Installation, Testing and Commissioning of 10kW Off-Grid Solar Power Plant inlcuding 540w Monocrystaline Solar Panels, 200Ah Battery, Battery Stand, 10.1KVA - 120V Solar Inverter, MMS- 10.KW, DC & AC Cable, Battery Stand, DCDB, LA , Earthing , BOS etc all complete. |
| 58 | Installation and Transportation |
| 59 | Providing, Installation, Testing and Commissioning of Otis / Kone/ Thyssenkrupp /Hindwell/ or any approved make Electric Traction Passenger Elevator of 10 person (680 Kgs) capacity Elevators, traveling from GROUND FLOOR to FIRST FLOOR above, stopped at all floor and opening on the same side, 1 m/s speed, AC varable voltage variable frequency ( with close loop) controlled, simplex full collective, automatic with ACVVVF door operator & multi-ray door detector system, etc complete ( Otis model code No. 7C10A-7-24.00M or equivallent) as per specification and instruction of Engineer in charge. The work also include all building/ structural works for supporting arrangement system, necessary scaffolding required for erection of the complete system, necessary wiring and installation of lighting for lift well and lift pit, providing ladder in the lift pit etc. as required complete. Rates also includes minimum 2 years Annual Maintenance Charges. |
| 60 | Providing, Installation, Testing and Commissioning of Otis/ Kone/ Thyssenkrupp/ Hindwell/ or any approved make Electric Traction Passenger Elevator of 6 person (340 Kgs) capacity Elevators, traveling from ground floor to 3rd floors above, stopped at all floor and opening on the same side, 0.7 m/s speed, simplex full collective, etc complete ( Otis model code 7C5A-4-10.00M-200VF or equivallent) as per specification and instruction of Engineer in charge. The work also include all building/ structural works for supporting arrangement system, necessary scaffolding required for erection of the complete system, necessary wiring and installation of lighting for lift well and lift pit, providing ladder in the lift pit etc. as required complete. Rates also includes minimum 2 years Annual Maintenance Charges. |
| 61 | Premium Executive Chair High Back: Supplying and placing of Ergonomically designed high back Senior executive visitor revolving chair with foam seat and back upholstered with leatherite, user friendly torsion bar mechanism, soft touch leatherite cushion arms, one position locking system and hydro pneumantic system for easy height adjustment. The chair has five prong base with premium quality castors. |
| 62 | Executive Chair High Back: Supplying and placing of Ergonomically designed high back Senior executive visitor revolving chair with foam seat and back upholstered with leatherite, user friendly torsion bar mechanism, soft touch leatherite cushion arms, one position locking system and hydro pneumantic system for easy height adjustment. The chair has five prong base with premium quality castors. |
| 63 | Office Chair Supplying of Ergonomically designed low back executive revolving chair with high density moulded foam seat, upholstered with specially developed low piling permeable upholstery, mesh back, user friendly push back mechanism, PP arms and hydro pneumatic system for easy height adjustment. The chair has five prongs nylon base with premium quality 60mm glass filled nylon castors. |
| 64 | Visitors ChairSupplying of Ergonomically designed medium back visitor chair with high density foam seat and back upholstered with leatherite, soft touch leatherite cushion arms and having cantilivered chromium plated frame. |
| 65 | Sofa Three Seater with Two Single Seater Secondary UnitsSupplying of Sofa Set with 3+1+1 seater configuration ergonomically designed visitor sofa with right density foam seat and back upholstered with leatherite upholstery. |
| 66 | Center Table with legs Supplying center table of size 600 x 1200 x 430mm (H) with 12mm thick black GLASS top (cut to shape as per design) including stainless steel pipe frame with chrome finish. Legs must have rubber anit skid grip at bottom. |
| 67 | Office Table 2400L x 2100W x 750mm (H) With 2 Drawer Box (PreLam Board) Supplying desk with Main Table of size 2400mm x 1100mm x 750mm including drawer pedestal and Return unit size 1000mm x 500 x 450mm (return unit with 18mm thick PreLaminated Particle board front sliding door lockable sides and closed back with 9mm thick PreLaminated Particle board). The Worktops shall be made of superior quality 25mm thick particle board of grade II, type II, confirming to IS : 12823 of approved shade. The top 25mm thick and side panels (18mm thick PreLaminated particle board) will be claded with special post forming laminated of thickness 0.62X0.8mm. Wire managers and computer tray shall be provided on table top with 55-60mm dia to hold wires. All exposed edges of table shall have 2mm thick Hot melt PVC banding. |
| 68 | Office Table 1650 x 750 x 750mm (H) (PreLam Board) Supplying Desk with main table of size 1650mm x 750 x 750mm(H) and Drawer Box consisting three drawers lockable. The Worktops shall be made of superior quality 25mm thick particle board of grade II, type II confirming to IS: 12823 of approved shade. The top and side panels will be claded with special post forming laminated of thickness 0.62X0.8mm, One no. of Modesty panel and sides shall be provided made of 18-25mm thick laminated particle board of grade II, type II, confirming to IS: 12823 of length as per design. Wire managers and computer tray shall be provided on table top with 55-60mm dia to hold wires. All exposed edges of table shall have 2mm thick Hot melt PVC banding |
| 69 | Multiseater Vistors' Bench/Waiting Bench - 2180(L) X 660(D) X 870(H)Supplying 4 Seater Bench with Aluminum Arm And Leg, Powder Coated Cross Beam, Metal Insert PU Seat Back,With Switch Board(REFERENCE- GEEKEN MODEL FLY-7) |
| 70 | Cafeteria Table - 900(D) X 870(H)Supplying Café Table resting on Chrome Plated Stainless steel pipe, Powder Coated Base Plate, 25mm thick PLPB Edge Banded top(REFERENCE- GEEKEN MODEL GC 985) |
| 71 | Cafeteria Chair -Supplying Café Chair made up of SS Pipe Frame with 12mm thick wooden seat, chrome plated. (REFERENCE GEEKEN GC 919 MODEL) |
| 72 | Auditorium/Seminar Hall Chair -Supplying Chair made up of black powder coated Pipe Frame with PU Arm, back and seat upholstered with fabric tapestry. (REFERENCE- GEEKEN GV633 MODEL) |
| 73 | Reception Table Supplying and fixing of Reception table at the entrance of office of size 1500 L X 1000H X 600D , with main table of size 1500X600 mm, working space 1500 X 600mm .The Worktops shall be made of superior quality 25mm thick particle board of grade II, type II confirming to IS: 12823 of approved shade. The top and side panels will be claded with special post forming laminated of thickness 0.62X0.8mm,Modesty panel shall be all around made of 18-25mm thick laminated particle board of grade II, type II, confirming to IS: 12823 of length as per design. one wire managers shall be provided on table top with 55-60mm dia to hold wires. The side shall be provided with 2 nos. glide screws each. All exposed edges of table shall have 2mm thick Hot melt PVC banding. Complete in all respect including Glass top design fixed on glass fitting. |
| 74 | Vertical Filing Cabinet W470 X D620 X H1320 Supplying of Filing Cabinet with miniumum Outer Dimension 460mm (W) x 600 mm (D) x 1300mm (H).The filing cabinet should have four filling drawers with equally divided shelves.It should have a rigid knockdown construction made of CRCA Steel.The Top, Side, Drawer front and frames should be minimum 0.6mm thickness and the Back, Bottomand Drawer should be of minimum 0.5mm thickness.Drawers opening/closing should be achieved by pulling/pushing on high quality precision ball slides and should have interlocking system along with anti‐tilt and anti‐rebound mechanism.Each drawer should be capable of withstanding a load of minimum 35kg.Handling groove/Handle should be provided for each drawer along with a suitable label holder.The Final finish should be Epoxy powder coated to the thickness of 50±10 microns. |
| 75 | Steel Almirah - W900 X D450 X H1830Supplying Steel Almirah with 2 glass doors, 2 steel doors, adjustable shelf, made up of metal sheet of 0.8mm thikckness |
| 76 | Assembled Computer- Specifications: CPU: Intel Core i5 or Above, RAM: 8GB DDR4 3200MHz or Above SSD: 512 GB, HDD: Not Required, OS: Microsoft Windows 11 (64 Bit), Monitor: 20 Inch LED Monitor with Full HD Display • Keyboard: Mechanical Keyboard • Mouse: Optical Tracking Based With 3 Buttons |
| 77 | Internal,external electrification and PH and sanitary fitting as direction by EIC |
| 78 | Land Scaping work |
| 79 | Fixing Wash Down Water Closet (European type W.C pan) with integral ‘S’ or ‘P’ trap conforming to IS 2556 : Part 8-2004, to the floor with wooden plug and chromium plated screws including jointing the trap with soil pipe in cement mortar (1:1) etc all complete as per specification. (Seat and cover to be measured and paid separetely. GROUND FLOOR |
| 80 | FIRST FLOOR |
| 81 | Fixing water closet (Orissa type sqatting pan ) 500 mm x 440mm size white glazed Vitreous China Orissa Pattern squatting pan conforming to IS:2556,Part.3-2004 duly embeded in cement conrete (1:4:8) all complete as per specification.GROUND FLOOR |
| 82 | FIRST FLOOR |
| 83 | Fixing Bowl Pattern Urinal conforming to IS 2556: PART 6-1996 including connecting the urinal of 430x260x350mm or 340x410x265mm size respectively with waste pipe by means of white lead mixed with chopped hemp etc all complete as per specification. GROUND FLOOR |
| 84 | FIRST FLOOR |
| 85 | Fixing manual flushing cistern with a pair of Cast Iron or M.S brackets complete with fittings including Cast iron siphonic apparatus, mosquito proof lead, chromium plated brass couplings for connections with inlet, outlet and overflow pipes, making connection with suply main with 12mm dia pvc inlet pipe including cutting holes and making good the same all complete as per specification. GROUND FLOOR |
| 86 | FIRST FLOOR |
| 87 | GROUND FLOOR |
| 88 | FIRST FLOOR |
| 89 | Fixing 600mm x 450mm bevelled edge mirror of superior glass mounted on 6mm thick A.C sheet or plywood sheet and fixed to wooden plugs with chromium plated brass screws and washers complete as per specification. GROUND FLOOR |
| 90 | FIRST FLOOR |
| 91 | Fixing standard sized CP brass Towel Rail complete with CP brass brackets fixed to wooden plugs with CP brass screws etc complete as per specification. GROUND FLOOR |
| 92 | FIRST FLOOR |
| 93 | Fixing CP brass soap holder complete with CP brass brackets fixed to wooden plugs with CP brass screws etc complete as per specification.GROUND FLOOR |
| 94 | FIRST FLOOR |
| 95 | Fixing PVC Waste pipe of the following diameter for Wash Basin and Sink including brass check nut etc complete as per specification.32mm dia GROUND FLOOR |
| 96 | FIRST FLOOR |
| 97 | Fixing cp brass Waste coupling of following diameter for wash basin/Sink including brass check nut etc complete as per specification. 32mm dia GROUND FLOOR |
| 98 | FIRST FLOOR |
| 99 | Fixing 15mm dia CP Brass Short Body Bib Cock with long screws, shanks and back nuts of the following nominal bore as per specification GROUND FLOOR |
| 100 | FIRST FLOOR |
| 101 | Fixing of 15mm C.P brass Angular Stop Cock conforming to IS781/1995 of following nominal sizes as per specificationGROUND FLOOR |
| 102 | FIRST FLOOR |
| 103 | Fixing 15mm dia PVC inlet connection pipe and making connection with pillar cocks and supply mains for wash basin complete as per specification GROUND FLOOR |
| 104 | FIRST FLOOR |
| 105 | Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings, with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer-in-Charge.Concealed work, including cutting chases and making good the wall etc. 15 mm nominal dia |
| 106 | 20 mm nominal dia |
| 107 | 25 mm nominal dia |
| 108 | 32 mm nominal dia |
| 109 | 40 mm nominal dia |
| 110 | Providing and fixing of Brass or Gun metal Full Way valve conforming to IS :71-1995 of the following nominalsized with wheel as per specification complete. 40mm |
| 111 | Fixing Rotational moulded polyethylene cylindrical vertical water storage tanks conforming to IS : 12701--1996 including cutting holes through the tank and fixing mild steel tubes and fittings and providing extra sockets and jam nuts, fixing ball valve etc, including hoisting upto a height of 5 metres above ground level and placing the tank to the required position etc all complete as per specification and direction of the Engineer in charge 2000 litre capacity Double Layer Cylinderical Vertical water storage tanks (Without stagging 3rd Floor) |
| 112 | Providing and fixing under ground unplasticized rigid PVC soil waste & rain water pipes conforming to IS:13592 Type-A including jointing with seal ring conforming to IS:5382 leaving 10mm gap for thermal expansion single socketed pipes with nails,bobbins and wooden plugs as per specification or laying in trenches including earth work in exavation in all kind of soil & refilling of trenches as er specification.(Jointing to be measured & paid for separately) including fitting and fixtures. 110mm |
| 113 | Cutting holes through existing brick work including making good the same in cement mortar (1:4) for taking GI/PVC pipes and fittings etc all complete as per specification. |
| 114 | Cutting hole in RCC floors and roofs upto 19cm thick for passing G.I / P.V.C pipes and fittings etc and repairing the holes after insertion of pipe etc with cement concrete (1:2:4:) including finishing complete so as to make it leak proof. |
| 115 | Cutting grooves in pucca floors and walls for taking GI/PVC pipes and making good the damages as per specification complete. |
| 116 | C.P Grating Please Enable Macros to View BoQ information |
