|
| 1 | Earth work Excavation in ordinary soil in F&P within intial lead and lift including rough dressing and levelling the ground etc. complete. |
| 2 | Supplying and filling F&P with river sand with well watering and ramming etc. complete. |
| 3 | Supplying all materials, labour, T&P and providing Cement Concrete (1:3:6) using 4 cm size CBHG metal etc. complete. |
| 4 | Supplying all materials, labour, T&P and providing Flyash brick masonary in cement mortar (1:6) in F&P etc. complete. |
| 5 | Supplying all materials, labour, T&P and providing RCC M(25)using 12mm size CBHG chips etc. complete. |
| 6 | Supplying all materials, labour, T&P and providing Flyash brick masonary in cement mortar (1:6) inSuperstructure etc. complete. |
| 7 | Providing 12 mm thick CP(1:6) to out side smooth surface etc. complete. |
| 8 | Providing 16 mm thick CP(1:6) to in side smmoth surface etc. complete. |
| 9 | Providing 6 mm thick CP(1:4) to smooth surface etc. complete. |
| 10 | One coat cement wash to inside and out side smooth surface with all cost of labour, T&P , materials etc. complete. |
| 11 | Supplying all materials, labour, T&P for applying two coats of weather coat r over the out side wall with well, watering and curing etc. complete. |
| 12 | Supplying all materials, labour, T&P for applying two coats of plastic paint inside wall with well, watering and curing etc. complete. |
| 13 | G.I. Grill gate,Door , shutter made out of G.I.flat angle, square bar painted with red oxide primer as per the design approved . |
| 14 | Supplying all materials, labour, T&P and providing Reinforced Cement Concrete (1:1.5:3) using 12mm size BHGCB chips including centering and shuttering etc. complete. |
| 15 | Supplying, fitting & placing uncoated HYSD reinforcement including cutting, bending,binding & placing the steel rods as per drawing & technical specifications with cost of binding wire 18 to 20 gauges, etc., complete. |
| 16 | Rigid & Smooth, Centring & shuttering for RCC/CC work etc. complete.col base,GB |
| 17 | Rigid & Smooth, Centring & shuttering for RCC/CC work etc. complete.lintel |
| 18 | Rigid & Smooth, Centring & shuttering for RCC/CC work etc. complete.slab |
| 19 | Rigid & Smooth, Centring & shuttering for RCC/CC work etc. complete.column,Beam |
| 20 | fitting and fixing of humSupplying of all materials labour, T&P for providing 25mm.thick Grading concrete (1:2:2) by using 12mm Chips (C.B) to roof slab with water proof epipe in proper position |
| 21 | Fixing KOTA tiles in floors, treads or steps and landing over 20mm bed of C:M (1:4) jointed with neat cement slurry mixed with pigment to match the shade of the tiles including rubbing and polishing complete |
| 22 | Fixing KOTA tiles in dados, skirting and risers of steps on 12mm C:P (1:3) jointed with neat cement slurry mixed with pigment to match the shade of the tiles including rubbing etc complete |
| 23 | Providing and Laying Factory made Chamfered edge Cement Concrete Paver Blocks 80mm thick ness of required strength, thickness & size/shape made by table Vibratory method , to attain superior smoth finish using PU or Equivalent moulds ,Laid in required gray colour and Pattern over 50mm thick Compacted bed of coarse sand , copmacting and proper embedding / laying of interlocking Paver Blocks into the sand bedding layer through vibratory compaction by using plate vibrator, Filling joints with Fine sand and cutting of Paver blocks as per required |
| 24 | Recessed wiring to light point / fan point / exhaust fan point / call bell point with 1.5 sq.mm FR PVC insulatedsingle core multistrand copper conductor of ISI marked with 20 mm dia non-metalic PVC conduit with 5Amp, 250 V piano type switch with white colour frame ISI marked and ceiling rose ISI marked mounted on MS box having front bakelitecover of suitable size , MS box with 1.0 sq.mm FR PVC insulated single core multistrand copper conductor asearth wire including all accesories and connection as per direction of Engineer in Charge. Group-A |
| 25 | Supplying and fixing of metal box of 150 mm x 75 mm x 60 mm deep (nominal size) on surface or inrecess with suitable size of phenolic laminated sheet cover in front including providing and fixing 3pin 5 / 6 amps socket outlet and 5 / 6 amps piano type switch & with colour frame, connection, painting etc as required. complete as per the direction of Engineer-in-Charge.. |
| 26 | Circuit or Sub-main wiring in 20/25/32/50mm dia. good quality ISI mark PVC Conduit with following sizes PVC insulated un-sheathed 1100V,Single Core FRLS Cu. conductor wire of approved make with all other required materials & labour complete as per the direction of Engineer-in-Charge. (2 x 1.5 + 1 x 1.0) sq.mm copper wire for 6A Light plug Point, wall fan. |
| 27 | (2 x 2.5 + 1 x 1.5) sq.mm copper wire for ,6/16A Plug & Lighting Switch Board from main switch. |
| 28 | Supplying & Fixing of angle / Batten Holder fitting complete with 1 no of LED Lamp of approved make complete with all other necessary fixing materials including termination & labour including all other materials as required complete as per the direction of Engineer-in-Charge(Philips/CG/Havells). |
| 29 | Installation of Ceiling fan(Crompton/Havells) |
| 30 | Installation of Wall fan(Crompton/Havells) |
| 31 | Supply, Installation,Testing & commissioning of Surface mounting 1 x 28W T5 tube light fitting including luminairs of approved make complete with all materials & labour.(Make : WIPRO-WRF 80128SG/Equiv.-CG/Havells/PHILIPS ) |
| 32 | supplying and fixing of GI / Cement concrete display board Please Enable Macros to View BoQ information |
