|
| 1 | Dismantling, clearing away and carefully stacking materials useful for re-use for any thickness of walls. |
| 2 | Brick / Stone Masonry in cement mortar walls under 3m high. |
| 3 | Dismantling RCC using deploying machineries |
| 4 | Dismantling weathering course and pressed tiles |
| 5 | Plain cement concrete 1:4:8 mix using 40mm metal ISS HBG metal including and const and conveyance of all materials and all labour charges etc completeas per std specification |
| 6 | Providing steel centering for sides and soffits of cement concrete works including necessary arrangements with strutting for plain surfaces with out props, With all cost and conveyance of materials and lab our at site ect ., Coplete as per standard specfication. |
| 7 | For Toilet |
| 8 | Supplying , fabricating and placing in it position of MS or RTS rod including the cost of steel & Binding wire, labour charges for cutting, bending, placing & tying with grills and conveyance etc., complete.asper standard specification. |
| 9 | Providing and laying in position Standardised Concrete Mix M-20 Grade in accordance with IS 456 - 2000 using 20mm and down graded hard broken granite stone jelly for all RCC items of works with minimum cement contenet of 325Kg/ cum and maximum water cement ratio of 0.55 including admixture (Plasticiser / super plasticiser) in recommended proportions as per IS 9103 to accelerate, related setting of concrete, improve workability without imparing strength and durability with about (5.0cum), 7730Kg of 20mm machine crushed stone jelly and with about (3.3 cum), 5156kg of 10 - 12mm machine crushed stone jelly and with about (4.79cum) 7670 kg of Crushed Stone Sand (M- Sand), but excluding cost of reinforcement grill and fabricating charges centering and shuttering but including laying, vibrating with mechanical vibrators, finishing, curing, etc and providing fixtures like fan clamps in the RCC floor / roof slabs wherever necessary without claiming extra cost etc., complete complying with standard specification and as directed by the departmental officers - |
| 10 | Grade Beam |
| 11 | Supplying and filling the basement with Good Earth filling in layers of not more than 15cm thick well rammed watered and compacted - etc., complete complying with standard specification. |
| 12 | Brick work in CM 1:5 (one cement & Five Crushed Stone Sand (M- Sand)) using II class ground moulded bricks of size 9\\" X 43/8\\"X 2 3/4\\" including finishing, curing, etc., complete complying with standard specification - 100CFT |
| 13 | For Toilet |
| 14 | Plastering with cement mortar 1: 5 mix 12mm thick including cost and conveyance all materials etc. complete asper standard specification. |
| 15 | Paving the floor with Vitrified Marbonite tiles of approved quality and colour of size 600x600x8mm thick of approved make, quality and colour in all floors over a base layer of cement mortar 1:3(one cement three sand) 20mm thick and laid straight alignment and pointed neatly with colour cement at the rate of 0.40kg/m2 laid without any air gap in the tiles neatly and fixing in position as per standard specifications and as directed by the departmental officer. The colour & quality of tiles should be got approved by Municipal Engineer before use on work |
| 16 | Paving the floor with ceramic tiles siratch proof design of size 305mm x 305mm x 6mm in Cement Mortar 1:3, 20mm thick with all cost and conveyance of materials etc., for flooring of self designed grooves and both way special colour tile of best quality and pointing with white cement using atthe rate of 0.40Kg / sq m including finishing thejoint neatly and pointing flush with tile surface etc complete |
| 17 | Dadooring the walls with glazed square tiles of 150mmx150mmx6mm of the following colour set in cement Mortar 1:2 10mm thick and pointed with white cement @ 0.4Kg/m2 in all floors as directed etc., complete complete complying with standard specification (S.D.261A) |
| 18 | Providing polished cuddapha slab of 20mm to 30mm thick for shelves, cupborards, cover slabs etc., and pointing with cement mortar 1 : 3 ( One cement and three sand) and mixed with black oxide and finished smooth etc., complete. |
| 19 | Painting two coats with approved Interior and Exterior Emulsion paint over cement plastered wall surfaces including cleaning preparing the surface and quring etc complete asper standard specification. |
| 20 | Painting two coats with ready mixed approved paint over new steel surface including cost and conveyance all materials etc. complete asper standard specification. |
| 21 | Solid PVC Door Shutters using 19 Gauge 19mm MS square tubes for styles and outer frames. 15mm MS square tubes for top, lock and bottom rails. The steel tubes shall be covered with 5mm thick solid PVC Sheets. Shutter using 5mm thick solid PVC Sheets for panelling shall rigidly fixed in position including necessary furniture and fittings. The over all size of styles shall be 50mm x 30mm. The over all size of top rail, lock rail and bottom rail shall be 75mm x 30mm. The over all size of frames shall be 50mm x 45mm with suitable rabate for housing the shutter. |
| 22 | Supplying of following pipes and special including cost and conveyance all materials etc. complete |
| 23 | 1/2\\" GI pipe |
| 24 | 1/2\\" GI union |
| 25 | 1/2\\" GI elbow |
| 26 | 1/2\\" GI tee |
| 27 | 1/2\\" GI coupling |
| 28 | 1/2\\" G.I Hex Nipple |
| 29 | 1\\" PVC Pipe |
| 30 | 1\\" PVC Coupling |
| 31 | 1\\" PVC Tee |
| 32 | 1\\" PVC Ellbow |
| 33 | 3/4\\" PVC Pipe |
| 34 | 3/4\\" PVC Coupling |
| 35 | 3/4\\" PVC Tee |
| 36 | 3/4\\" PVC Ellbow |
| 37 | 3/4\\" x 1/2\\" PVC Reducer |
| 38 | 3/4\\" G.M Gate valve |
| 39 | 110mm PVC Pipe |
| 40 | 110mm PVC Tee |
| 41 | 110mm PVC Elbow |
| 42 | Solvent cement |
| 43 | Supply and run of 2 of 4 sq.mm(56/0.3) PVC insulated SC unsheathed Cu.conduction of 1100V on 7/20 GI bearer wire for service connection mains. (SD 65) |
| 44 | Supply and run of 2 of 6 sq.mm.(84/0.3)PVC insulated SC unsheathed Cu.Conductor of 1100V grade in 25mm dia GI pipe (class 'B' ) suitably bent at both ends with neccessay angle iron upright and end support for mains (SD 69) |
| 45 | Earthing as per the ISI specification with an earth electrode of 2.1 mt class 'B' GI pipe of dia not less than 40mm, with copper earth plate of size 125mmx50mmx6mm, with necessary funneling arrangements with necessary masonry work and with 38mm RCC cover slab for the brick masony. (SD 233) |
| 46 | Providing and fixing 110mm dia PVC Rain water down fall pipe eith necessary specials with all cost and conveyance or material cost and all labourcharges etc, complete as per standard specification |
| 47 | Supplying and fixing in position White / Colour Glazed Model Floor Mounted European Water Closet of best quality and approved make with 100mm “P” or “S” trap connecting with CI pipe of 100mm dia / PVC pipe of 110mm dia, double flapped rigid PVC black seat and seat cover with CP brass hinges including cost of white cement, cement for packing, spun yarn, teak wood plugs, brass screws, etc., including supplying and fixing 10 liters capacity PVC / 12.5 liters capacity porcelain low level flushing tank with a pair of CI brackets, etc., complete with all fittings, such as, 15mm brass ball valve with polythene float with brass handle, union coupling connected by means of 40mm white PVC flush hand using Indian adopter joint including all internal fittings, such as, 15mm bras connections, 15mm GM wheel valve, 15mm brass nipple (2 Nos.), 15mm nylon connection, TW plugs, screws and also giving necessary connection to the PVC pipe and painting the CI brackets with 2 coats of approved paint over one coat of red oxide primer, dismantling the masonry and re-doing the dismantled masonry to original condition, etc., complete complying with standard specifications. (The EWC and flushing tank with all accessories should be got approved by the Executive Engineer before use on works) Floor Fitting |
| 48 | Wiring with 2 x 1.5 sqmm (22 / 0.3) PVC insulated SC unsheathed Cu. Conductor of 1100V grade in suitable PVC rigid pipe concealed in wall and ceiling with PVC accessories in flush with wall with 3mm thick hylum sheet cover with TW switch box and 5A F.T switch with continuous earth wire connection of 14 SWG TC wire for making good of the concealed portion with suitable colour for PVC concealed light point / Fan point (For electronic regulator). (SD 22) |
| 49 | Supply and fixing of 1200mm (48\\") A C ceiling fan complete with stepped electronic 300W regulator with 300mm down rod on the existing clamp(S D 110) |
| 50 | Supply and fixing of 20W 4 Feet LED Fitting with LED M-1273 |
| 51 | supply and fixing of 30W LED street light fitting with LED (Higher end) with 25 mm dia. GI pipe (class B)with 1 no. 25 mm GI bend complete on the existing post/ on wall with PVC unsheathed copper leads withMS clamps and with painting . |
| 52 | Wiring with 2X1.5 sq mm (22/0.3) P V C insulated S C, unsheated Cu. Conductor of 1100 V grade in suitable P V C rigid pipe on wall and ceiling with P V C accessories 100X113mm TW switch box for 5 A3 pin non interlocking C S plug with painting of suitable colour with contineous earth wire connection of 14 SWG TC wire for open P V C plug point ( S D 36) |
| 53 | Supply and fixing of 375mm (15\\") sweep (light duty) AC exhaust fan complete with necessary wall opening and making of the wall |
| 54 | Painting and lettering arrangements for using best and approved colour including all cost and conveyance of materials to site and all labour cahrges etc. complete as per standard specification. |
| 55 | Supplying and fixing in position best quality approved make white glazed earthenware wash hand basin of size 550 X 400 mm with a pair of cast iron brackets, including cost of 15mm diametre brass chromium plated piller tape,32 mm diametre C.P. Waste union, 32 mm diametre P.V.C. waste pipe with rubber plug and chain, 15mm diametre G.M.wheel valve, 15mm dia brass nipple, 15mm dia nylon connections etc., including fixing the wash hand basin in the wall in position with a pair of C.I. brackets with teak wood plugs and screws and giving necessary water supply connection and paintiung the brackets with two coats of paint over a primimg coat of anticorrosive paint including testing for leackage etc., complete complying with standard specifications |
| 56 | Supplying and fixing best approved quality Brass C.P / Al anodised Towel rail 600mm. long and 20mm Diameter with brackets of same material including cost of Teak-Wood plugs and C.P.Screws etc., complete complying with standard specifications |
| 57 | Supplying and fixing best approved quality C.P.Soap Tray of size 150mm X 100mm including cost of Teak Woodplugs, brass screws complete complying with standard specifications. |
| 58 | Supply and fixing of PVC. Nahini / Floor Trap with stainless Steel Gratings - 100 mm x 75 mm including all charges etc, complete as per standard specification. |
| 59 | Supplying, fabricating and fixing in position of Alumi.Anod.natural colour matt finish door half glazed and half PLB board using 12 mm thick PLB board and 5.5 mm thick glazed door using rectangular Alu.Box section of following sizes for frame and shutter with necessary accessories such as rubber beading, Al. Clips, Best double action floor springs, Aluminium Handles on both sides,floor stopper,Tower bolt, Locks and glass including all materials, Labour, power consemption charges required for fabrication if necessary chipping, dismantling making necessary holes in RCC Coloums, Beams or Masonry wherever necessary with power drill to the extent required and made good to the original conditions after fixing etc.,complete. The Alumi. surface must be anodised with matt finish under electrically controlled condition in accordance with IS specification 1868 / 1962 of Anodic filthickness of not less than 15 Microns (Fifteen) for all sections. |
| 60 | Supplying and fixing of Furniture items including all cost etc., Please Enable Macros to View BoQ information |
