|
| 1 | Material and labour for applying one coat of white/ lime wash on old decorated surface of ceiling incl preparation of old decorated plastered or unplastered surfaces of walls including cornices etc by brooming down or steel wire brushing, scrapping down smoke soot, moulds, moss and efflorescent salts and trading oil and greasy spots cornices etc complete all as specified and directed. |
| 2 | Material and labour for applying one coat of white/ lime wash on old decorated surface of wall incl preparation of old decorated plastered or unplastered surfaces of walls including cornices etc by brooming down or steel wire brushing, scrapping down smoke soot, moulds, moss and efflorescent salts and trading oil and greasy spots cornices etc complete all as specified and directed. |
| 3 | Material and labour for preparation of plastered or unplastered old distempered surfaces of wall including pilasters and cornices and applying one coat of oil emulsion distemper (any tint) complete all as specified and directed . |
| 4 | Material and labour for preparation of plastered or unplastered old distempered surfaces of ceiling including pilasters and cornices and applying one coat of oil emulsion distemper (any tint) on ceiling complete all as specified and directed |
| 5 | Material and labour for complete removal of existing treatment of distemper and applying two coat of oil emulsion distemper (any tint as approved by GE) over a coat of primer on wall of any height including 2mm thick wall care putty complete all as specified and directed |
| 6 | Material and labour for complete removal of existing treatment of external surfaces washing, rubbing down by wire brushes stopping of surfaces & levelling / edging the disturbed places / edges using necessary filling & including 2mm thick of white cement wall Putty to obtain smooth regular / even finish, using sand paper and applying two coats of smooth exterior acrylic emulsion paint over a coat of primer complete all as specified and directed (Tint and shade as approved by the GE). |
| 7 | Material and labour for preparation of plastered or unplastered old decorated surfaces of walls applying one coat of cement base paint upto the height 12m of approved make & colour complete all as specified and directed |
| 8 | Material and labour for complete removal of existing treatment of cement base paint applying two coat of cement base paint including 2 mm thick birla white wall care putty upto the height 12m of approved make & colour complete all as specified and directed. |
| 9 | Material and labour for preparation of old wooden surfaces of any description over 10 cm width or girth and applying one coat of synthetic enamel paint complete all as specified and directed |
| 10 | Material and labour for preparation of old steel surfaces of any description over 10cm girth or width no otherwise described and applying one coat of synthetic enamel paint complete all as specified and directed. |
| 11 | Taking down chowkhats or frames with shutters (without taking off shutters from the frame) n.exc. 1.5 sqm each complete all as specified and directed. |
| 12 | All as per serial item no 11.00 above but exc. 1.5 sqm and n.exc. 4 sqm each -ditto-. |
| 13 | Taking down shutters of any description n.exc. 1 sqm each complete all as specified and directed. |
| 14 | All as per serial item no 13.00 above but exc. 1 sqm and n.exc. 2 sqm each -ditto-. |
| 15 | Cutting holes for inserting hold fast and making good dismantled portion in CM (1:3) in brick walls, built in cement mortar or cement concrete 1:2:4 type B1 as required exc one brick but not exc two bricks complete all as specified and directed. |
| 16 | Supply and fixing for factory made solid panel PVC door shutter 30mm thick (style) consisting of frame made out of M.S tubes for top & bottom rails. M.S frame shall be covered with heat moulded plain colour PVC C channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheet for top rail, lock rail & bottom rail, on either side & as gap insert for top rail & bottom rail. Panelling of plain colour PVC sheet to be fitted in the M.S frame welded/sealed to the stiles & rails with suitable PVC sheet beading and jointed together with solvent cement complete all as specified and directed. |
| 17 | Supply and fixing for factory made solid PVC chowkhats or frames of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with MS square tube, complete all as specified and directed. |
| 18 | Supply and fixing for aluminium anodized barrel tower bolt of extruded section 150mm long complete all as specified and directed. |
| 19 | Supply and fixing for aluminium anodized handle of extruded section 150mm long complete all as specified and directed. |
| 20 | Supply and fixing for 100 mm Butt hinges, extruded aluminium alloy with galvanised mild steel hinge pin, anodised and fixed, type C-21 complete all as specified and directed |
| 21 | Supply and fixing for factory made ERW section window box type ( 'P' Section) with hinges, steel handle, peg stay, complete with glazing bars, dovetailed or welded (to receive glazed or gauzed) complete all as specified and directed. |
| 22 | Dismantling of wrought iron or MS work of any description complete all as specified and directed |
| 23 | Supply and fixing for framed work such as grills, gratings, etc.. with ends of bars shouldered and/or riveted, or forged into spikes, framed guard bars, barred iron doors, ladders, framed balusters, walk ways, railings, framework of water tanks and similar work con- forming to Fe. 290.Gde-E-165 etc complete all as specified and directed |
| 24 | Supply and fixing for 105 x 60mm pressed steel frames for doors with one or more rebates including necessary fixing lugs hinges lock strike plate etc complete all as specified and directed. |
| 25 | Supply and fixing for 125 x 60mm pressed steel frames for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate etc complete all as specified and directed. |
| 26 | Material and labour for PCC 1:3:6 type C-0 using 12.5mm graded stone aggregate as in filling of pressed steel chowkhats complete all as specified and directed. |
| 27 | Supply and fixing for 35mm thick 2nd class hardwood (Hollock) factory made glazed and skelton shutters, open rebated and prepared to receive glass, gauge etc divided into squares with sash bars, edges of framing plain, chamfered or rounded fitted with cut and metered beads for securing glass etc, size of members complete all as specified and directed. |
| 28 | Supply and fixing for 35mm thick 2nd class hardwood (Hollock) factory made framed, panelled shutter (three panels) with lock rail and panel of 9mm BWP commercial ply or 12mm thick veneered particle board with commercial veneering on both faces and fitted to chowkhats size of rails and styles as per IS-1003 (Part-I). The timber shall be kiln seasoned and chemically pressure treated complete all as specified and directed. |
| 29 | Supply and fixing for 300mm mild steel sliding door bolts, plate type, stove enamelled black, with bright bolt not less than 12mm dia with and including a minimum of 6 bolts and nuts, four on bolt plate and two on staple plate and fixed complete all as specified and directed |
| 30 | Supply and fixing for MS barrel tower bolt stove enamelled black with bright bolt 200mm long complete all as specified and directed. |
| 31 | Supply and fixing for mild steel pressed handle stove enamelled black 150mm complete all as specified and directed. |
| 32 | Supply and fixing for aluminium anodized door stopper 140mm long overall length complete all as specified and directed. |
| 33 | Supply and fixing for MS helical door spring (rat tail pattern) 300mm long including roller and roller plate complete including welding and providing 40 X 3mm flat iron welded to angle iron frame as in repair complete all as specified and directed. |
| 34 | Supply and fixing for galvanized mild steel wire cloth 0.56mm nominal dia of wire and average width of aperture 1.18mm and fixed with tinned tacks or galvanized wire staples complete all as specified and directed. |
| 35 | Hacking out old broken glass (any thickness, size quality or description) from wooden/steel frames or stone concrete or brick surrounds glazed with putty or fixed with walls complete all as specified and directed. |
| 36 | Supply and fixing for 4 mm thick figured sheet glass ordinary quality with silicone gel and oil putty all around the glass in square n exc. 0.5 sqm in each pane complete all as specified and directed. |
| 37 | Demolition of cement concrete (unreinforced) in ground floors and paving n. exc 15 cm thickness below or above GL complete all as specified and directed. |
| 38 | Material and labour for PCC 1:4:8 type D-2 using 40 mm graded stone agg.as in foundation or mass concrete complete all as specified and directed. |
| 39 | Material and labour for providing 40 mm thick PCC 1:2:4 Type B-1 (using 20 mm graded stone aggregate) as in flooring including finishing the cement concrete surface even and smooth with using extra cement complete all as specified and directed. |
| 40 | Material and labour for 75mm thick PCC 1:3:6 type C-2 as in plinth protection fixed even and smooth without using extra cement complete all as specified and directed. |
| 41 | Supply and fixing for glass dividing strips, 3 mm thick 38 mm wide inserted in position, conform to design complete all as specified and directed. |
| 42 | Demolition of brick work or stone /boulder masonry built in cement mortar including all quoins, arches, pillar etc complete all as specified and directed. |
| 43 | Material and labour for brick work with subclass B bricks, straight or curved on plan exc 6m mean radius built in cement mortar (1:6) complete all as specified and directed |
| 44 | All as per serial item no 43.00 above but except brick -ditto- |
| 45 | Taking down cement plaster on brick walls ceiling and chajjas, including hacking out joints, hacking for key, scrubbing down with water complete all as specified and directed. |
| 46 | Material and labour for internal plastering 10 mm thick on fair faces of brick or concrete surfaces, in cement mortar 1:6, finished even and smooth without using extra cement complete all as specified and directed. |
| 47 | Material and labour for rendering 15 mm thick external using cement plaster in CM 1:4 on fair faces of brick/concrete work surfaces complete all as specified and directed. |
| 48 | Material and labour for rendering 5mm thick cement plaster 1:3 on fair faces of concrete surfaces in ceiling complete all as specified and directed. |
| 49 | Material and labour for two coats of oil bound distemper over a coat alkali resistant priming paint on walls including preparation of new surfaces complete all as specified and directed. |
| 50 | Material and labour for applying two coats of white wash on ceiling including preparation of new surfaces complete all as specified and directed. |
| 51 | Material and labour for two coats of cement based paint over one coat of primer on newly plastered surfaces of walls incl preparation of surfaces complete all as specified and directed. |
| 52 | Dismantling floor hearth or wall tilling including cement mortar bedding (but not backing coat) removing serviceable tiles to store & rubbish off the premises complete all as specified and directed. |
| 53 | Material and labour for machine cut pre polished kota stone slab flooring 20-25mm thick over cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete including screed bed of 20 mm in CM 1:6 complete all as specified and directed |
| 54 | Material and labour for pre polished Kota stone slab 20-25mm thick in riser of steps, skirting, dado and pillar laid over cement screed and jointed 15mm thick rendering CM 1:4 complete all as specified and directed |
| 55 | Material and labour for glazed ceramic tiles (coloured) 600x300x7mm/450x350x7 thick on vertical surfaces set, jointed in neat cement slurry and pointed with white cement mixed with pigment to match over & including 10mm thick rendering CM 1:4 complete all as specified and directed. |
| 56 | Material and labour for vitrified tiles 7 to8 mm thick jointed free squarer/rectangular) area of each tile exceeding 0.18 sqm but not exceeding 0.36 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match all as specified and as directed over & including 15mm thick screed bed CM 1:6 complete all as specified and directed. |
| 57 | Material and labour for vitrified tiles 7 to8 mm thick jointed free as in skirting squarer/rectangular) area of each tile exceeding 0.18 sqm but not exceeding 0.36 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match all as specified and as directed over 15mm thick rendering CM 1:4 complete all as specified and directed. |
| 58 | Material and labour for non - skid Ceramic coloured tiles 7 to8 mm thick jointed free squarer/rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match all as specified and as directed over & including 15mm thick screed bed CM 1:6 complete all as specified and directed |
| 59 | Material and labour for non - skid Ceramic coloured tiles 7 to8 mm thick jointed free as in skirting squarer/rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match all as specified and as directed over & including 15mm thick rendering CM 1:4 complete all as specified and directed |
| 60 | Cutting chases, pinning in, making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelves, lintels, etc.; and cutting chases for concealed water tubing or concealed conduit wiring, etc., and making good, cutting not exc 10cm girth in stone, concrete wall and slabs complete all as specified and directed |
| 61 | Taking up or down steel tubing 15 mm dia and connections, including cleaning for re-fixing or removal to store complete all as specified and directed |
| 62 | Taking up or down steel tubing 20 mm dia and connections, including cleaning for re-fixing or removal to store complete all as specified and directed |
| 63 | Supply and fixing for 15 mm bore GI tubing medium grade to walls, ceiling or laid in floors complete all as specified and directed |
| 64 | Supply and fixing for 20 mm bore GI tubing medium grade to walls, ceiling or laid in floors complete all as specified and directed |
| 65 | Supply and fixing in repair 15mm dia CP bib taps, fancy cast copper alloy with crutch or butterfly handle, screwed for iron pipe fixed complete all as specified and directed. |
| 66 | Supply and fixing in repair 15 mm dia CP fancy type stop valves, cast copper alloy screwed pressure, with crutch of butterfly handle, screwed both ends for iron pipe for unions and fixed complete all as specified and directed |
| 67 | Supply and fixing in repair 15mm bore pillar taps cast copper alloy, with capstan heads, chromium plated, screwed down, fancy type high pressure, with or without lettered 'HOT or COLD' with long screwed sunk and fly nuts screwed for iron pipe complete all as specified and directed. |
| 68 | Supply and fixing for PVC connections 15mm size with PTMT nuts of length 450 mm complete all as specified and directed |
| 69 | Supply and fixing for 600mmx450mm bevelled edge mirror of selected quality glass, mounted on 4mm thick commercial plywood and fixed to wooden plugs with chromium plated brass screws and cup washers complete all as specified and directed |
| 70 | Supply and fixing in repair Brass chromium plated shower rose 125mm size complete all as specified and directed |
| 71 | Supply and fixing in repair Tubular towel rail 20mm dia, D type, 60cm long between flanges complete all as specified and directed |
| 72 | Supply and fixing in repair vitreous China squatting pan, `Orissa' pattern, size 630 x450 mm white, with integral foot rests (excluding flushing cistern and flush pipe) complete all as specified and directed |
| 73 | Supply and fixing in repair PVC valveless, symphonic action type, flushing cistern 10 LTRS CAPACITY, low level, white, with inlet, ball valve, float and handle including brackets with flush pipe complete all as specified and directed |
| 74 | Supply and fixing in repair vitreous China wash basin, white, flat back, size 450x300mm excluding taps, waste chain and plug and porcelain stopper but including brackets 32 mm waste fittings, brass, chromium plated for glazed ware sinks, basins, etc. with long screwed shanks and fly-nuts, flange end bedded in red lead cement and other and fixed complete all as specified and directed |
| 75 | Supply and fixing in repair SS fancy type curtain rod of 20 mm dia with two no of bracket & final per running meter complete all as specified and directed |
| 76 | Supply and fixing in repair CP grating 110 dia complete all as specified and directed |
| 77 | Material and labour for two coats of synthetic enamel painting over one coat of pink primer including preparation of previously untreated surfaces of wood or wood based material exc. 10 cm width or girth complete all as specified and directed. |
| 78 | Material and labour for fixed in repair precast cement concrete type B-0 (1:2:4) using 12.5mm graded stone aggregate for jallies 25 mm thick set in cement mortar 1:4 including all moulding frame complete all as specified and directed. |
| 79 | Supply and fixing for pre- painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and directed. |
| 80 | Demolition of RCC/ Chajjas of any description and in any position not otherwise specifically provided for etc complete all as specified and directed |
| 81 | Dismantling Plain or corrugated fibre sheeting, any gauge, thickness, including Nainital or similar pattern roof coverings complete all as specified and directed |
| 82 | Material and labour for roof trusses framed trussed purlins crane rails and fastening and heavy brackets framing ( Beam tee, angle, square, rectangular hallow sections or flat sections indl distance pieces, cleats etc Fe-410W (Gde E 250) complete all as specified and directed |
| 83 | Taking down rolling shutters push/pull type and removing all denting, bending & greasing, tightening the springs and refixed in position complete all as specified and directed. |
| 84 | All as per serial item no 83.00 above but gear type operated by handles --ditto--. |
| 85 | Supply and fixing for steel rolling shutters with thickness of lathes 1.00mm thick without ball bearing as specified with ventilating portion including top cover anchoring rod, hasp & staple & one shop coat of red oxide primer. Created in position as indicated for push pull or manhole type fixed as in repair complete all as specified and directed. |
| 86 | All as per serial item no 85.00 above but 1.25mm thick gear operated type with level gear box & crank hands -ditto- |
| 87 | Supply and fixing in repair PVC (SWR) 110 mm bore of pipes double socketed in any length with rubber ring joints fixed to walls complete all as specified and directed |
| 88 | Supply and fixing in repair PVC (SWR) 100 mm bore of bends any radius complete all as specified and directed |
| 89 | Material and labour for 1.5 mm thick PVC tiles/ sheets, laminated plain coloured, marbled mosaic or mottled finish, laid with approved rubber based adhesive in floors complete all as specified and directed |
| 90 | Material and labour for roof cleaning by cutting or uprooting grass, vegetation and small plants etc from the roof/wall, including making good cement plaster/concrete surface as specified and directed and removing rubbish off the premises, cleaning the surface complete all as specified and directed. |
| 91 | Taking down existing water proofing treatment and chiselling the existing bituminous coating and disposing rubbish off the premises to a distance exceeding 150 m and n. exc 250 m complete all as specified and directed. |
| 92 | Roughening surfaces of old concrete floor etc by picking, sweeping clean and washing down with water to remove dust, etc. complete all as specified and directed. |
| 93 | Dismantling of brick tiles or terracing tiles or any other roof treatment, single layer on roof & stacking serviceable tiles for use and disposal of unserviceable material off MOD premises complete all as specified and directed |
| 94 | Demolition of mud in roofs, any thickness, including plastering and leaping (whether full thickness removed or only a part thereof) complete all as specified and directed. |
| 95 | Material and labour for providing plain cement concrete (1:3:6) type C1 using 20mm graded crushed stone aggregate on roof surfaces as padding to receive waterproofing treatment and to the required slope including finishing the exposed surface even and fair complete all as specified and directed. |
| 96 | Material and labour for Cleaning (by use of wire brush, broom and high-pressure jet) and preparation of roof/wall (RCC/BRICK/tiles/Cement concrete) surface and made free of dirt, foreign particles, laitance followed by grinding all protrusions to make surface modulated. Thereafter, inspection for cracks on the surface caused by thermal expansion/ contraction and repairing the cracks on the surface caused by thermal machine, filled with repair mortar/general purpose grout in the proportions as recommended by manufacturer, supply and applying high performance hybrid polyurea waterproofing coating spray/hand applied liquid membrane complete all as specified and directed with following specifications: (a) Elongation of range 400% to 600%. (b) Tensile strength of 8-12N/mm2. (c) Crack bridging ability of 3.00-4.00mm. (d) Hardnes (Shore \\"A\\" ASTM D2240) of range 50-70. The application shall include final base preparation, epoxy primer application in ratio 1.1 (resin: hardener) with 100% water dilution and application of Hybrid polyurea in two coats in 6 hrs interval to achieve total min thickness 1 to 1.50mm. The application/ treatment shall be carried out by authorized rep of approved specialist firm/manufacturer. A sample has to be prepared by applicator before starting of work on ground and this sample to be approved by GE. Make- SIKA/FOSROC/AsianPaints/Berger.Note:- The defect liability period of water proofing treatment to RCC roof slab including sunken floor shall be 10 years and the contractor shall be responsible to keep the entire building(s) free from leakage/seepage for a period of 10 years after certified date of completion. The contractor may obtain a similar guarantee from the specialist firm engaged by him for the purpose. (b) Contractor has to bring entire quantality (as per manufacturer instruction for coverage area per unit of material) of water proofing material in one go and to be deposited in MES store. MES JE will issue material for use at site on daily basis and all empty cane shall be kept in MES store until entire work of water proofing is completed as per CA.(c) Contractor shall submit original purchase voucher as soon as material arrived at site, for verification of required quantity of material as per manufacturers instruction. |
| 97 | Material and labour for cleaning (by use of broom and high-pressure water jet) the surface and making free of dirt, foreign particles, laitance followed by grinding all protrusions to make surface modulated, thereafter, inspection for cracks on the surface caused by thermal expansion, contraction. Cutting the grooves with suitable cutter machine in \\"v\\" groove filled with Repair mortar/micro concrete/General purpose grout as recommended proportionally as per recommendation of manufacturer. Making of Gollas at all the corners with Polymer modified mortar (1:4 Cement: sand with acrylic polymer 3.5% by weight of cement) complete all as specified and directed |
| 98 | Material and labour for two coats of synthetic enamel paint including one coat of red oxide primer on steel surfaces exc. 10cm width or girth including preparation of new surfaces, complete all as specified and directed. Please Enable Macros to View BoQ information |
