|
| 1 | site cleareance |
| 2 | Dismantling pucca brick or lime work including staking serviceable materials in countable stacks within 15m lead and disposal of unserviceable materials with all leads all complete …do…do…E/I |
| 3 | Dismantling floor tils…do….E/ |
| 4 | Dismantling old plaster and pointing in cement or lime and raking out joints to 15mm depth, watering and disposal of unserviceable materials with all leads all complete as per direction of E/I. |
| 5 | Reinforced cement concrete work in beams, suspended floors, roofs having slope up to 15° landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases above plinth level up to floor five level, excluding the cost of centering, shuttering, finishing and reinforcement, with 1:1.5:3 (1 cement : 1.5 coarse sand(zone-III) : 3 graded stone aggregate 20 mm nominal size). |
| 6 | Reinforced cement concrete work in beams, suspended floors, roofs having slope up to 15° landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases above plinth level up to floor five level, excluding the cost of centering, shuttering, finishing and reinforcement, with 1:1.5:3 (1 cement : 1.5 coarse sand(zone-III) : 3 graded stone aggregate 20 mm nominal size). |
| 7 | Providing designation 75 A brick work in C.M. (1: 6) in superstructure with approved quality of clean coarse sand of F.M. 2 to 2.5 including, providing 10mm thick mortar joints, cost of screening materials, raking out joints to 15mm depth curing, taxes and royalty all complete as per building specification and direction of E/I |
| 8 | Providing 12mm cement plaster (1:6) with clean coarse sand of F.M. 1.5 including screening, curing with all leads and lifts of water, scaffolding taxes and royalty all complete as per building specification and direction of E/I. |
| 9 | Providing two coats of plastic emulsion paint of approved shade and make over old surface including washing cleaning and preparing the walls scaffolding washing of floor and taxes all complete as per building specification and direction of E/I. |
| 10 | Supplying, fitting, and fixing M.S. Grill made of 20X6mm M.S. Flate as per approved design and drawing, properly fabricated with joints continuous fillet welded and finished smooth, carriage of grill to work site, hoisting as per building specification and direction of E/I. (where materials is not supplied by the deptt. |
| 11 | Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections / appropriate Z sections--do-- Anodised aluminium (anodised transparent or dyed to required shade according to IS: 1868, Minimum anodic coating of grade AC 15) 63 mm x 38 mm x 1.5 mm For fixed portion |
| 12 | Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with EPDM rubber / neoprene gasket etc. complete With float glass panes of 4.0 mm thickness (weight not less than 10 kg/sqm) |
| 13 | Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections / appropriate Z sections--do-- Anodised aluminium (anodised transparent or dyed to required shade according to IS: 1868, Minimum anodic coating of grade AC 15) 63 mm x 38 mm x 1.5 mm For fixed portion |
| 14 | for shutter of door window and ventilation include providing and fixing hing …etc….dodo Powder coated aluminum minimum thickness of powder coated of 50 micron |
| 15 | s/f/f aluimium fitting of approved quality and made to door & windows 75mm butt hinge |
| 16 | 400mm tower door bolt |
| 17 | 75mm door handle with flate |
| 18 | Supplying, fitting and fixing collapsible gate of approved size and make properly fabricated with vertical double channels 20 x 10 x 2mm at 100mm centers and braced with M.S. flat diagonals 20 x 3mm with top and bottom rails of T.iron 40 x 40 x 6mm with 38mm dia steel pulleys complete with bolts, nuts, locking arrangement, stoppers, handles, including applying a priming coat of red lead paint, car riage, hoisting and taxes all complete as per building specification and direction of E/I. |
| 19 | Structural steel work in single section, fixed with or without connecting plate, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete. |
| 20 | Supplying, fitting and fixing 30mm thick solid core type non-decorative single leaf flush door shutter in door and windows with black board core blended with high quality phenol formal dehydes synthetic resine both side commercial veneered of standard make with oxidised iron fittings such as hinges, towerbolts, handle, cleat and sand blocks and taxes all complete as per building specification and direction of E/I. |
| 21 | Providing Tor steel reinforcement as per approved design and drawing including carriage of Rods (straight or in coils) to work site, cutting, bending and binding with annealed wire with cost of wire, removal of rust, placing the rods in position complete as per building specification and direction of E/I. |
| 22 | Supplying, and fixing fan hook of 16mm dia M.S. bar 1 meter long bent to required size and shape , placed in position and fixed in R.C.C. slab/beam at the time of casting all complete as per building specification and direction of E/I. (where materials is not supplied by the deptt.) |
| 23 | Centering and shuttering including strutting, propping etc. and removal of form for : Lintels, beams, plinth beams, girders, bressumers and cantilevers |
| 24 | Centering and shuttering including strutting, propping etc. and removal of form for : Suspended floors, roofs, landings, balconies and access platform |
| 25 | Providing primer two coat of red lead paint of approved make over new steel surface including preparing the surface after cleaning, removing dust, dirt, scales smokes and grease and cleaning the surface throughly including cost of scaffolding and taxes all complete as per building specification and direction of E/I. (Mode of measurement area shall be multiplied by the co-efficient as indicated in building specification) |
| 26 | providing and laying vertified floor tiles for step of stair in with water absorption less than0.08% and conforming to IS15622,of approved make,in all colours and shades,laid on20mm thick cement mortar 1:4 (1 Cement:4 Course Sand),Jointing with grey cement slurry @3.3Kg/Sqm Including Grouting the joints with Cement and matching pigment etc.,complete step tiles & have bullnose,anti and self embossed line. Size of tile 1200mmx300mmx15mm for Stair |
| 27 | Providing and laying Polished Granite stone flooring in required design and patterns, in linear as well as curvilinear portions of the building all complete as per the architectural drawings with 18 mm thick stone slab over 20 mm (average) thick base of cement mortar 1:4 (1 cement : 4 coarse sand) laid and jointed with cement slurry and pointing with white cement slurry admixed with pigment of matching shade including rubbing, curing and polishing etc. all complete as specified and as directed by the Engineer-in Charge.Polished Granite stone slab colour of Black, Cherry/Ruby Red or equivale |
| 28 | Add carriage cost of Materials i) Sand lead 30 km |
| 29 | ii) Chips lead 12 km |
| 30 | iii) Bricks lead 11 km |
| 31 | iv) Steel + Cement lead 05 km |
| 32 | Point wiring in pvc conduit with piano type switch wiring for point /fan/exaut fan point /call point with 1.5sq.mm FR PVC installtion….do…....E/I |
| 33 | S/F Piano type switch/socket:- Supplying and fixing following piano type switch/sockit on the existing switch box/cover including connections etc as required. |
| 34 | Circuit/submain wiring in PVC conduit:- Wiring for circuit/submain wiring along with earth with following sizes --do-- 2x2.5sq.mm+1x2.5sq.mm earth wire |
| 35 | 2 x 4.00 Sq.mm + 1 x 4.00 Sq. mm earth wire |
| 36 | 2x6sqmm+6sqmm |
| 37 | Supplying and fixing following capacity double pole/TP&N sheet metal switch disconnector fuse unit in existing metal board with rewirecable type fuses, including drilling holes in metal board, making connections, etc as required. |
| 38 | LED Street light |
| 39 | S/F power plug point with piano type accesories with suitable size of G.I. Box with welded pluse including providing and fixing 6 pin 5/6 AMP and 15/16 AMP socket outlet and 15/16 AMP piano type switch connection etc as required. |
| 40 | S/F Brass batton / Angle Holder including connection etc as reqd |
| 41 | S/F 3 Pint 5 Amp ceiling rose on the existing Juction Box wooden block including connection etc as reqd. |
| 42 | 10/12 W LED Tubelight |
| 43 | 15/18 W LED Bulb |
| 44 | Supply of ceiling fan 48'' (1200 mm) BLDC Star IS:374:219 |
| 45 | Supply of Recess square LED Round down light (36W) |
| 46 | Exuaust fan |
| 47 | Supply and fitting of 16''(400 mm) Wall mounted fan |
| 48 | Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes,having thermal stability for hot & cold water supply, including testing of joints complete as per direction of Engineer in Charge.Concealed work,including cutting chases and making good the walls etc |
| 49 | Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, |
| 50 | Making holes in walls for laying G.I. pipes and restoring the same after pipe laying with complete job 250 mm thick wall |
| 51 | Providing and fixing Gun metal full way valve of approved quality with complete job 20 mm dia |
| 52 | Providing and fixing male ended 15mm dia brass bib cock with complete job |
| 53 | Providing and fixing brass/C.I. Stop cock of approved quality all complete as per specification and direction of E/I. (A) BRASS STOP COCK: (b) 20mm dia |
| 54 | Providing and fixing on wall face un plasticized rigid PVC rain water pipe with complete job (i) single socketed pipes (110 mm dia) |
| 55 | Providing and fixing on wall face un plasticized PVC molded fittings / with complete job.(110 mm) |
| 56 | Supplying fitting and fixing viterous white glazed earthen ware wash hand basin of parry or Hindustan --do-- |
| 57 | Supplying,materials and labours for constructing inspection chamber ofdesignation class 75 B bricks --do-- |
| 58 | Kitchen shink |
| 59 | work plece floor driner jali |
| 60 | Polythen water storage tank of mark with cover and suitble locking system in double layer confirming to IS 12701-1996 with latest revision…do…..E/I 2000.00 Litter |
| 61 | pressuer adjust shower with revolcity joint ….do…E/ |
| 62 | 15Lit capcity pull and let go high level C.I cistern ….do. |
| 63 | E/W in excavation in foundation trenches in ordinary soil(vide classification of soil item A) and disposal of excavated earth as obtained to a distance upto 50m including all lifts,levelling,ramming,the foundation trenches,removing roots of trees and extra for earthwaork in hard soil(vide classification of soil item B)...do.....do.....E/I |
| 64 | Providing Stone Dust filling in foundation trenches or in plinth including ramming and watering in layersnotexceeding150mmthickwith all leads and lifts including cost of materials, labour, royaltyand taxesall complete as per specification and directionofE/I. (Modeofmeasurement compactedvolume.)Stonecrusherdust finer than3mmwithnotmorethan10% passing 0.075 seive at quarry (Add CPOH @ 14.95%) (M-004 |
| 65 | Provinding and laying factory made chamfered cement concrete paver block in foot path lawns , parking drive way light trafic parking etc…..do….....E/I 60 mm thick cement concrete paver block of M -35 grade with approved colour design |
| 66 | Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level : 1:1½:3 (1 Cement: 1½ coarse sand (zone III) : 3 graded stone aggregate 20 mm nominal size) |
| 67 | Add carriage cost of Materials i) Dust lead 12 km |
| 68 | ii) Chips lead 12 km |
| 69 | iii) Cment lead 5 km |
| 70 | Providing, hoisting and fixing above plinth level up to floor five level precast Reinforced cement concrete in shelves, including setting in cement mortar 1:3 (1cement : 3 coarse sand), cost of required centering, shuttering and finishing with neat cement punning on exposed surfaces but , excluding the cost of reinforcement, with 1:1.5:3 (1 cement : 1.5 coarse sand(zone-III) : 3 graded stone aggregate 20 mm nominal size). |
| 71 | providing Tor steel reinforcement of 10mm,12mm,& 16mm. dia bars as per approved design and drawing inclusive carriage of M.S. bars to work site, cutting, bending and binding with annealed wire with cost of the wire, removal of rust, placing the rods in position all complete as per building specification and direction of E/I. (a) 10mm (TMT coil Fe 500) (only valid for Tata (Tiscon), SAIL, JSPL,Electrosteel Steels Ltd. Bokaro and Vizag (RINL)} |
| 72 | Supplying, fitting and fixing M.S. grill gate with M.S. grill made of 20X6mm M.S. flats or 16mm M.S. square bars fitted on 25X25X6mm M.S. Angle frame of size 60X60X6mm. Including cost of fabrication, providing necessary locking arrangement with haskal and domny duly fixed in P.C.C. (1:2:4) blocks of required size applying a priming red lead paint over steel work, taxes all complete as per drawing specification and direction of E/I. |
| 73 | Provinding plate -10mm thick |
| 74 | Providing and applying plaster of paris putty 2mm thickness over plastered wall & ceilling ….do…do all complete job ..as per specifiction …...E/I |
| 75 | Providing two coats of plastic emulsion paint of approved shade and make over old surface including washing cleaning and preparing the walls scaffolding washing of floor and taxes all complete as per building specification and direction of E/I. |
| 76 | Labour for fabricating, erecting, hoistion and fixing in position structrral steel work in R.S. Joist, channel, Angle, Tee, flat, plate, latice member, built up compound section in column, girder, stair case, or truss including cost of gusset plates, holding down bolts, anchor plates at all heights and depths, bolting, welding ( machining wherever necessary) with applying a priming coat of red lead paint all complete as per approved drawing, building specification and direction of E/I |
| 77 | Add carriage cost materials |
| 78 | Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections / appropriate Z sections-- do-- Anodised aluminium (anodised transparent or dyed to required shade according to IS: 1868, Minimum anodic coating of grade AC 15) 63.5 mm x 38.5 mm x 2mm For fixed portion.............Do.......E/I |
| 79 | Unskill Labour |
| 80 | Supply of 4mm thick ACP |
| 81 | Providing and fixing false ceiling at all heights with integral densified calcium silicate reinforced with fibre and natural filler false ceiling tiles of Size 595x595mm of approved texture, design and patterns as per CPWD Specification 2019 --do-- With 15 mm thick Tegular edged light weight calcium sliciate false ceiling tiles |
| 82 | Add GST 18 % |
| 83 | add 1 % labour cess Please Enable Macros to View BoQ information |
