|
| 1 | Providing and fixing white vitreous china pedestal type water closet (European type ) with seat and lid. 10 ltr. Low level white vitreous china flushing cistern & Steel flush bend with fitting C.I. brackets, 40 mm flush bend, overflow arrangment with specials of standard make and mosquito proof coupling of approved municipal design, complete including painting of fittings and brackets, cutting and making good the wall & floor wherever reqd. DSR 17.3 |
| 2 | W.C. pan with ISI marked white soild plastic seat and lid cera hirdware DSR 17.3.1 |
| 3 | Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass pillar taps,32 mm C.P.brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever require : DSR 17.7 |
| 4 | White Vitreous China Wash basin size 550x400 mm with a pair of 15 mm C.P. brass pillar taps DSR 17.7.3 |
| 5 | Providing and fixing stainless steel A ISI 304 (18/8) kitchen sink as per IS 13983 with C.I. brackets and stainless steel plug 40 mm including painting of fittings and brackets,cutting and making good the walls wherever required DSR 17.10 |
| 6 | Kitchen sink without drain board DSR 17.10.2 |
| 7 | 610x460mm bowl depth 200 mm DSR 17.10.2.2 |
| 8 | Providing and fixing 8 mm dia C.P. / S.S. Jet with flexible tube upto 1 metre long with S.S.triangular plate to Eureopean type W.C. of quality and make as approved by Engineer - in - charge DSR 17.16A |
| 9 | Providing and fixing P.V.C. waste pipe for sink or wash basin including P.V.C. waste fittings as DSR 17.28 |
| 10 | 32 mm dia DSR 17.28.1.1 |
| 11 | Providing for fixing G.I. pipes complete with G.I. fittings and clamps, including cutting and making good etc. As per 18.10 |
| 12 | 15 mm dia. nominal bore as per DSR 18.10.1 |
| 13 | 20 mm dia. nominal bore as per DSR 18.10.2 |
| 14 | Providing and fixing gun metal gate valve with C.I. wheel of approved quality (screwed end) :DSR 18.17 |
| 15 | 15 mm dia nominal bore NSR |
| 16 | 20 mm dia nominal bore DSR 18.17.1A |
| 17 | Providing and fixing ball valve (brass) of approved quality, High or low pressure, with plastic floats complete : DSR 18.18 |
| 18 | 20 mm dia. nominal bore as per DSR 18.18.2 |
| 19 | providing and Fixing uplasticised PVC connection pipe with Brass unions: DSR No. 18.21 |
| 20 | 15 mm dia. nominal bore as per DSR 18.21.2.1 |
| 21 | Providing and fixing G.I. Union in G.I. pipe including cutting and threading the pipe and making long screws etc. complete (New work) DSR No. 18.46 |
| 22 | 20 mm nominal bore DSR 18.46.2 |
| 23 | Providing &placing on terrace (at all floor levels) polyethylene water storage tank, ISI 12701 marked,with cover and suitable locking arrangement and making necessary holes forinlet,outlet and overflow pipes but without fittings and the base support for tank.[500 ltr] DSR 18.48 |
| 24 | Providing and fixing C.P. brass bib cock of approved quality conforming to IS:8931 :DSR 18.49 |
| 25 | 15 mm nominal bore DSR 18.49.1 |
| 26 | Providing and fixing C.P. brass long body bib cock of approved quality conforming to IS standards and weighing not less than 690 gms. DSR 18.51 |
| 27 | 15 mm nominal bore DSR 18.51.1 |
| 28 | Providing and fixing C.P.brass stop cock (concealed) of standard design and of approved make conforming to DSR18.52 |
| 29 | 15 mm nominal bore. DSR 18.52.1 |
| 30 | Providing and fixing C.P. brass angle valve for basin mixer and geyser points of approved quality conforming DSR 18.53 |
| 31 | 15mm nominal bore DSR 18.53.1 |
| 32 | Providing and fixing of Extension nippple upto 1-1/2\\" length DSR 18.53A |
| 33 | Cutting holes up to 30x30 cm in walls including making good the same:DSR 18.76. |
| 34 | With common burnt clay F.P.S. (non modular) bricks |
| 35 | Cutting holes up to 15 x 15 cm in R.C.C. floors and roofs for passing drain pipe etc. and repairing the hole after insertion of drain pipe etc. with cement concrete 1:2:4 including finishing complete so as to make if leak proof. DSR No. 18.77 |
| 36 | Making chases up to 7.5x7.5 cm in walls including making good and finishing with matching surface after housing G.I. pipe etc DSR 18.78 |
| 37 | Providing and fixing of CP Brass/SS/ABS overhead shower with swiveling Joint , 125mm dia (min) with C.P Brass/ S.S Shower Arm and flange to the satsifaction of EIC of approved make ESSCO Model No. 536A & 542A or equialent Model of CERA /Kerovit/ Jal |
| 38 | Providing and fixing of CP Brass/SS/ABS Soap Tray made of Plastic including glass bowl of approved make Jal Model No. 36540 or equialent Model of CERA /Kerovit/ ESSCO |
| 39 | Providing and fixing of CP Brass/SS Towel Ring with screws etc. to the satsifaction of EIC of approved make Jal Model No. 36524 Warna or equialent Model of CERA /Kerovit/ ESSCO |
| 40 | Providing and fixing of CP Brass/SS Towel Rail 600mm of with screws etc. to the satsifaction of EIC of approved make Jal Model No. 36520 Warna or equialent Model of CERA /Kerovit/ ESSCO |
| 41 | Providing & fixing of C.P Cup heavy duty of approved make |
| 42 | Prov.& fixing of looking Glass with PVC Beeding with Plastic hard board or with Stods complete all respect of approved make |
| 43 | Providing and fixing GI Tank Nipple 20 mm dia complete |
| 44 | Conversion for OWC to EWC with 4\\" C.I. bend, 4\\" PVC collar 1 No 4\\" PVC pipe upto 1'-6\\" long including dismantling of OWC pan and floor and repair of flooring to its original condition complete in all respect with satisfaction of EIC. |
| 45 | Dismantling of Old material, not reuseable, including GI / HCI Pipe & Specials, Faucets, Ceramic Fixtures, PVC tanks & allied items and disposal of malba including that of chase from site to a approved dumping site complete. Please Enable Macros to View BoQ information |
