|
| 1 | Providing and fixing white vitreous china pedestal type water closet (European type) with seat and lid, 10 litre low level white vitreous china flushing cistern & C.P. flush bend with fittings & C.I. brackets, 40 mm flush bend, overflow arrangement with specials of standard make and mosquito proof coupling of approved municipal design complete, including painting of fittings and brackets, cutting and making good the walls and floors wherever required : .17.3 |
| 2 | W.C. pan with ISI marked white solid plastic seat and lid 17.3.1 |
| 3 | Providing and fixing white vitreous china water closet squatting pan(Indian type) :17.13 |
| 4 | Orissa pattern W.C. pan of size 580x440 mm17.13.2 |
| 5 | Providing and fixing white vitreous china pedestal type (European type/ wash down type) water closet pan17.15 |
| 6 | Providing and fixing 8 mm dia C.P. / S.S. Jet with flexible tube upto 1 metre long with S.S. triangular plate to Eureopean type W.C. of quality and make as approved by Engineer - in - charge.17.16A |
| 7 | Providing and fixing controlled flush, low level cistern made of vitreous china with all fittings complete17.19 |
| 8 | 10 litre (full flush) capacity-white17.19.1 |
| 9 | Providing and fixing solid plastic seat with lid for pedestal type W.C. pan complete :17.2 |
| 10 | White solid plastic seat with lid17.20.1 |
| 11 | Providing and fixing P.V.C. waste pipe for sink or wash basin including P.V.C. waste fittings complete.17.28 |
| 12 | Flexible pipe17.28.2 |
| 13 | 32 mm dia17.28.2.1 |
| 14 | Providing and fixing 600x450 mm beveled edge mirror of superior glass (of approved quality) complete with 6 mm thick hard board ground fixed to wooden cleats with C.P. brass screws and washers complete.17.31 |
| 15 | Providing and fixing G.I. pipes complete with G.I. fittings and clamps, i/c cutting and making good the walls etc.18.1 |
| 16 | 15 mm dia nominal bore18.10.1 |
| 17 | 20 mm dia nominal bore18.10.2 |
| 18 | 25 mm dia nominal bore18.10.3 |
| 19 | 32 mm dia nominal bore18.10.4 |
| 20 | 40 mm dia nominal bore18.10.5 |
| 21 | 50 mm dia nominal bore18.10.6 |
| 22 | Providing and fixing gun metal gate valve with C.I. wheel of approved quality screwed end) :18.17 |
| 23 | 20 mm nominal bore18.17.1A |
| 24 | 25 mm nominal bore18.17.1 |
| 25 | 32 mm nominal bore.18.17.2 |
| 26 | 40 mm nominal bore.18.17.3 |
| 27 | 50 mm nominal bore.18.17.4 |
| 28 | Providing and fixing uplasticised PVC connection pipe with brass unions :18.21 |
| 29 | 45 cm length18.21.1 |
| 30 | 15 mm nominal bore18.21.2.1 |
| 31 | Providing and fixing G.I. Union in G.I. pipe including cutting and threading the pipe and making long screws etc. complete (Newwork) :18.46 |
| 32 | 15 mm nominal bore18.46.1 |
| 33 | 20 mm nominal bore18.46.2 |
| 34 | Providing and placing on terrace (at all floor levels) polyethylene water storage tank, IS : 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank.18.48 |
| 35 | Providing and fixing C.P. brass bib cock of approved quality conforming to IS:8931 :18.49 |
| 36 | 15 mm nominal bore18.49.1 |
| 37 | Providing and fixing C.P. brass angle valve for basin mixer and geyser points of approved quality conforming to IS:893118.53 |
| 38 | 15 mm nominal bore18.53.1 |
| 39 | Providing and fixing PTMT bib cock of approved quality and colour.18.54 |
| 40 | 15 mm nominal bore, 86mm long, weighing not less than 88 gms18.54.1 |
| 41 | Providing and fixing PTMT Ball cock of approved quality, colour and make complete with Epoxy coated aluminium rod with L.P./ H.P.H.D. plastic ball.18.62 |
| 42 | 15 mm nominal bore, 105 mm long, weighing not less than 138 gms18.62.1 |
| 43 | 20 mm nominal bore, 120 mm long, weighing not less than 198 gms18.62.2 |
| 44 | Providing and fixing C.P. brass long body bib cock of approved quality conforming to IS standards NSR |
| 45 | 15 mm nominal bore |
| 46 | Providing and fixing of One piece (EWC) water closet pan/European type full complete make as per approved make listNSR |
| 47 | Providing and fixing of C.P. Grating of approved makeNSR |
| 48 | Providing and fixing of SFRC G.T. cover 375x375x25 mm thick made out of M.S. angle iron size 25x25x5 mm thick with fixing wire mash 1\\"x1\\" of 10 guage including cutting welding and fixing with cement concrete 1:1 1/2:3 completeNSR |
| 49 | Providing and fixing of SFRC inspection chamber cover 600x600x35 mm thick made out of M.S angle iron size 35x35x5 mm and TMT bars 10 mm i/d both sides including cutting welding and fixing with cement concrete 1:1 1/2:3 completeNSR |
| 50 | Providing and fixing of PVC fitting for L/L cisternNSR |
| 51 | Providing and fixing of PVC ball cock for L/L cisternNSR |
| 52 | Providing and fixing CP Waste complete in all respectNSR |
| 53 | Providing and fixing of C.P. brass spindel for bib taps weight approx 110 gms complete in all respect NSR |
| 54 | Normal duty Spindle |
| 55 | Heavy duty Spindle |
| 56 | Providing and fixing of PVC handle for L/L cistren complete in all respect as per entire satisfaction of EIC.NSR Please Enable Macros to View BoQ information |
