Sales : +91-777 804 8217
| Sl. No. | Item Description |
| 1 | Dismantling plain or corrugated steel sheeting, any gauge, thickness as in roof coverings. |
| 2 | S&F prepainted aluminium zinc steel sheet (galvalume base) or thinknee 0.50mm having tensile strength of 550 MPA , in colour and to be facotry moulded as in roof covering /cladding and fixed with self tapping screws /self drilling serews, to suit the roofing in customized colour matching with the colour of roofing and screws are to be fixed using torque adjustable electronic gun screws drills of suitable capacity complete all as specified. |
| 3 | M&L Pre-painted galvalume aluminum zinc coating GI based Plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified. |
| 4 | Dismantling timber scantlings 40 sq. cm and over in section, in any position |
| 5 | M&L Rolled sections channel, angle, Tee section and in tubular section as in main and cross beams, hip and jack rafters; purlins,post of Fe 410- W (Gde-E-250) where connected to common rafters and running rails and embbeded in concrete complete . |
| 6 | Dismantling wrought iron or mild steel work of any description not otherwise provided for. |
| 7 | M&L Bands, straps, supports or stays for rainwater, ventilating pipes, including bolts, if required: hooks (stay), heavy, for large gates; hook and pintle hinges: large hasps and staples; chains; hand made sliding bolts; clamps; hold fasts; wall ties; hooks for hanging fans; plain angle cleats for securing purlins to wood trusses or rafters; knee piece inserts; two way and three way straps, plate washers and similar small articles conforming to Fe-290 Gde-E-165 |
| 8 | M&L for two coats of synthetic enamel painting over a coat of red oxide zinc chrome primer on new steel surfaces over 10cm width or girth including preparation of surface complete. |
| 9 | Demolition of brick work built in cement work complete. |
| 10 | M&L for brick work with sub class `B’ bricks, straight on plan exc 6m mean radius built in CM 1:6 complete all as specified and directed. |
| 11 | Taking down cement plaster on brick or stone walls etc raking out joints hacking for key scrabbing down water etc complete. |
| 12 | M&L for rendering 15 mm thick readymade plaster on inner/outer walls by adding 17-19% of potable water by weight of material for thickness above 15mm it is recommended to be applied in multiple layers. ready mix plaster shall complies with IS 1661-1972, IS 2250-1965, IS 2402-1963 and confirms the compressive strength @ 28 days 10-12 Mpa/Bulk density 1500-1600 Kg/m3. (Note : The rate quoted by contractor shall include cleaning of surface, application as per instruction and scaffolding upto 20 Mtr ht all as specified and directed) |
| 13 | Supply only WPC complete all as specified and directed. |
| 14 | M&L Preparing new plastered or unplastered surfaces of walls and applying two coats of distemper oil emulsion, white or tinted over & including a coat of primer complete. |
| 15 | Material & Labour preparation of newly plastered surfaces of wall and applying wall care putty 2mm thick (averaging) in two coats on wall surfaces including cornics etc for proper levelling of plaster and applying a two coats of exterior emulsion paint over a priming coat (as per manufacturers instruction) including all preparation complete all as specified and directed |
| 16 | M&L preparation wood Surfaces and applying two coats of synthetic enamel paint over a coat of pink primer on newly prepared wooden surfaces complete all as specified and directed. |
| 17 | Dismantling of Wall and ceiling boards (fibre, pulp, insulation, etc.) any thickness, including cover fillets but without frame work. |
| 18 | S&F powder coated aluminium snap grid frame work for false ceiling size of grid 605 mm x 605 mm complete all as specified and directed. |
| 19 | Supply & fixing 4mm thick non asbestos fibre board cememt building board for insulation and accoustic purpose, 600 x 600 mm size fixed with staples on snap grid as in ceiling complete all as specified and directed. |
| 20 | Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises.complete all as directed. |
| 21 | M&L for Vitrified tiles 9 to 10 mm thick light shade (square/ rectangular) polished, area of each tiles n exc 0.36 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match including 15 mm thick screed bed or bedding Layer in cement mortar 1:6 complete all as specified and directed. |
| 22 | M&L Vitrified tiles 9 to 10 mm thick light shade (square/ rectangular) polished, area of each tiles n exc 0.36 sqm, in skirting/ dado or verticle surfaces set and jointed in neat cement slurry and pointed in white or coloured cement to match including 10 mm thick plaster in CM 1:3 complete all as specified and directed. |
| 23 | Taking down chowkats or frames n.exc 1.50 sqm each with shutters (without taking off shutters from the frames) complete. |
| 24 | S&F Factory made precoated steel window and vents (Box Section) with glass shutter and fly proof shutter incl guard bars as per HQ CEBZ Drg No TD/158 of sh 1/2 & 2/2 with and including all precoated fittings .NOTE: (i) Payment under this item will be make combined for steel frames, steel shutters and Guard bard/Grill, However unit rate quoted shall deemed to include cost of beading, fittings such as handles, hinges,Telescopic stays, locking arrangements and fixing of glass and wiremesh etc.(ii) Supply only 4 mm thick sheet glass and stainless steel wire mesh be measured and paid separately. (iii) Weight of Grill/Guard Bars, handle,hinges and locking arrangements shall not be accounted for payment purpose . |
| 25 | Supply only Stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples |
| 26 | Supply only4mm thick sheet glass ordinary quality and glazing with oil putty in square/rectangular n.exc 0.50 sqm in each panes. |
| 27 | M&L for PCC 1:3:6 type C-1(using 20mm graded stone agg) for bed block for fixing hold fast complete all as specified. |
| 28 | S&F plain framed solid, chowkhats and frames, wrought rebated on solid rounded or chamfered put together with glue pinned supplied and fixed 2nd class hard wood. |
| 29 | S&F 35mm thick flush shutters, solid core construction, with block board core and plywood face panesls, commercial type on bothe sides complete all as specified and as directed. |
| 30 | S & F aluminium handle, cast type anodized 150mm size. |
| 31 | S & F 200 mm long aluminium anodized barrel tower bolts of extruded section lcomplete all as specified and as directed. |
| 32 | S&F butt hinges medium weight cold rolled mild steel of 100mm long complete all as specified and directed. |
| 33 | S&F Aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips with sheet, cast and extruded section and fixing bolt and sliding bolt of extuded sections or cast aluminium alloy and fixed 300 mm long complete. |
| 34 | S&F powder coated Anodised aluminium frame for doors, windows ventilators with one or more rebates including joining cleat for fixing etc. complete shall as specified. |
| 35 | S&F powder coated Anodised aluminium door shutters, aluminium section weighing 0.55kg/m including necessary joining cleats, glazing clips, rubber neoprene packing, handles 2 Nos in each door, hinges, anodised aluminium snap beading, screws etc. complete all as specified |
| 36 | S&F Sheet glass 5.5mm thick tinted glass and glazing in squares complete. |
| 37 | S&F Factory made single extruded WPC (wood polymer Composite) solid door/ window/ Ceosetory window & other Frames/ Chowkhat of size 45 x 70 mm comprising of PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wwod powder/ rick husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms ) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded stat headed SS screws having minimum frame density of 750 kg/ cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2, modules of elasticity 900 N / mm 2 and resistance to spread of flame of Class A catogory with property of being termite/ borer proof, water / moisture proof and fire retardant and fixed in position with MS hold fast/lugs / SS dash fasteners of required dia and length complete as per direction of Engineer-in-Charge (M.S. hold fast/ lugs or SS dash fasteners shall be paid for separately). |
| 38 | S&F Factory made single extruded WPC (wood polymer Composite) solid plain flush door shutter of 35 mm thick comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/ cum and screw withdrwal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N mm2 modulus of elasticity 850 N / mm2 and resistance to spread of flame of Class A catogary with property of being termite/ borer proof, water/ moisture proof and fire retardanat and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk SS screws, all as per direction of Engineer-In-Charge (Note:- stainless steel butt hinges and necessary SS screws shall be paid separately. |
| 39 | S&F in repair Decorative Stainless steel tubular Harrison rails curtain rail of 20 mm dia and over of mild steel, chromium plated with fixing brackets, stops, rollers, glove at ends etc. complete all as specified and directed. |
| 40 | M&L Non - skid coloured ceramic tiles 7 to 10 mm thick (square/rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors etc. set and jointed in neat cement slurry over screed bed of 15 mm thick 1:6 and pointed in white or coloured cement to match complete. |
| 41 | M&L glazed coloured ceramic tiles in verticle surfaces 450 x 300 x 7mm thick set and jointed in neat cement slurry and pointed in coloured cement to match with backcoat of screed bed or bedding layer 10 mm thick 1:3 and pointed in white or coloured cement to match complete all as specified.. |
| 42 | S&F in repair vitreous China squatting pan, Orissa pattern incl CI spun trap, size 580 x 440 mm white, with integral foot rests squat pattern closet also includes setting the trap and pan in lime concrete (1 lime, 2 sand or surkhi and 5 aggretate), min. 150mm thick all round and finished just below level of rim of pan to receive the floor finishing (thickness as indicated) and making good floor complete all as specified incl cutting to the flush pipe and necessary repair to the floor complete all as specified and directed. |
| 43 | S&F in repair PVC Flushing Cistern 10 litre capacity, Low Level Valve Less, Symphonic Action type, White, with Inlet, Ball Valve, Float and Handle including 32mm dia PVC Flush Pipe, a Pair of MS Brackets,CP flush bend including Cutting and Pinning in Ends, Making Good Disturbed Surfaces in Cement Mortar 1:3 including taking down unserviceable Flushing Cistern and connected Items of any description, complete all as specified and as directed. |
| 44 | S& F in repair 600x 450mm beveled edge mirror or selected quality glass mounted on 6mm thick AC bldg board or commercial plywood and fixed to wooden plugs with CP brass screws and cup washers. |
| 45 | M&L for cutting chases, pinning in, making good to facing on brick wall where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades shelves, lintels etc, and cutting chases for concealed water tubing or concealed conduit wiring etc and making good, cutting not exc 10cm girth. |
| 46 | Taking up or down GI Water Tubing 15mm dia (bore) including Connections and Fittings, segregating serviceable Pipes & Fittings and Stacking properly at Site(s) for re-use, complete all as specified and as directed. |
| 47 | -ditto- all as per Item No. 46 here–in–before, but for 20mm dia (Bore). |
| 48 | -ditto- all as per Item No. 46 here–in–before, but for 25mm dia (Bore). |
| 49 | Supply and Laying Steel Water Tubing 15mm dia (Bore), Galvanised, ‘Medium Grade’ with all Fittings, fixed on Walls, Ceiling or laid in Floors or any other Situation, complete as all specified and as directed. |
| 50 | -ditto- all as per Item No. 49 here–in–before, but for 20mm dia (Bore). |
| 51 | -ditto- all as per Item No. 49 here–in–before, but for 25mm dia (Bore). |
| 52 | S&F in repair 15mm dia bib taps CP Brass with Capstanhead, screwed down, screwed for iron pipe of bore 15mm complete. |
| 53 | S & F vitreous china wash basin, white, flat back, size 550X400 mm, (flat back or angle back type) including brackets and including cutting for and pinning in ends of brackets or erecting stand, fixed in repairs complete all as speified and directed. |
| 54 | S&F in repair Angle Cock,15mm fancy type, chromium plated, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed complete all as specified and as directed. |
| 55 | S&F in repair 15mm dia Gun-metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe and fixed |
| 56 | S&F in repair Gate valve 20mm Gun-metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe and fixed |
| 57 | S & F in repair Stainless Steel grating 125mm dia complete all as specified. |
| 58 | Supply & fixing in repair 110 mm bore PVC (SWR) Soil, waste and vent pipes single socketed including necessary fittings like socket, bend, elbow, single/double tee etc in any length with rubber ring joints in any length with rubber ring joints, laid in trenches or in floors and making good with cement mortor 1:3 or with PCC 1:2:4 complete all as specified and directed. |
| 59 | Supply & fixing in repair 75 mm bore PVC (SWR) Soil, waste and vent pipes single socketed including necessary fittings like socket, bend, elbow, single/double tee etc in any length with rubber ring joints fixed with clamps of flat iron and including bolts and nuts and securing ends of stays to wall or roof and making good with cement mortor 1:3 or with PCC 1:2:4 including two coats of cement base paint /colour wash complete all as specified and directed. |
| 60 | S & F PVC floor traps of size 75mm with grating including jointing to PVC pipe with lead joint all as specified and as directed. complete fixed in repair incl making joint water tight. |
| 61 | Dismantling water tanks of capacity exc 250 but not exc 500 ltr capacity complete. |
| 62 | S&F rotational moulded polythene water storage tanks tripple layer (cylindrical vertical with closed top) hoisted and fixed in postion 1000 ltrs capacity with and including 20 mm dia ball valves, high pressure of PTMT with epoxy coated aluminium rod and high density plastic ball screwed for iron pipe minimum weight 210 gram complete all as specified and directed. |
| 63 | S&F in repair Brass chromium plated shower rose 125mm size with 225 mm Flange, swivel joints, including fixing to steel pipe or union complete all as specified and directed. |
| 64 | S&Fin repair Tubular towel Rail CP Brass, chromium plated D type with CP Brackets, 600 mm long between flanges all as specified. |
| 65 | S&F in repair Soap Dish Stainless Steel complete all as specified & directed. |
| 66 | S&F in repair Peg Set of 6 Stainless Steel as approved by Engr-in-Charge |
| 67 | S&F in repair Brass CP Wall mixer/ Basin mixer for mixing hot & cold water (3 in 1) screwed down for iron pipe and fixed bore of pipe 15mm complete all as specified |
| 68 | S&F in repair Glass shelf 60cm(long) x 12cm(wide) x 5.5MM thick (with ABS Bracket chromium plated bracket guard and SS railing complete all as specified and as directed |
| 69 | S&F in repair Corner Glass Shelf 300mm (with ABS Brackets) 300 x 600mm as approved by Engr-in-Charge |
| 70 | Demolition of reinforced cement concrete of any description and in any position not otherwise specifically provided for (reinforcement cut as required to facilitate demolition) complete. |
| 71 | M&L for RCC nominal mix Type B1 1:2:4 (using 20mm aggregate) for slabs supported on walls,beams and columns in floors,roofs, landings, balconies,canopies, deck slabs and in shelves and the like complete all as specified and direceted. |
| 72 | Formwork to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work; not exceeding 200mm thick (Horizontal or sloping) etc. |
| 73 | Mild steel TMT bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire annealed not less than 0.9mm dia or securing with clips. |
| 74 | Demolition of cement concrete (unreinforced) in ground floors and pavings not exceeding 15 cm thickness.(below or above ground level) Complete all as specified and directed. |
| 75 | M&L for 75mm thick cement concrete 1:3:6 type C-2 using 20mm graded agg as in plinth protection & finishing surface even & smooth using extra cement complete all as specified and as directed. |
| 76 | M&L Chequered cement concrete tiles 20cm x 20cm x 25mm thick, set, jointed and pointed in neat cement slurry in floor etc with grey pigment cement and pigment. set and jointed in neat cement slurry over screed bed of 15 mm thick 1:6 and pointed in white or coloured cement to match complete all as specified. |
| 77 | M & L for providing plain cement concrete type B-1, 1:2:4 (using 20 mm graded crushed stone aggregate) as in coping, bed block for embedding hold fasts, kneelers, apex stones, bed plates, water troughs and the like including weathering, slightly rounded or chamfered angles & throating as directed including necessary form work as required complete all as specified and directed. |
| 78 | M&L for rendering 15mm thick in CM 1:4 on fair faces of brick work or concrete surfaces finished even and smooth without using extra cement complete all as specified and directed. |
| 79 | Demolation and breaking up drain pipes 150 mm (salts glazed ware ,AC or Reinforced concrete) set in cement mortar all as specified. |
| 80 | M&L unplasticised PVC pipe 160mm dia type 'B' with wall thickness 4mm (Min) of pressure rating 4 KN/Sqm laid in trenches and jointed with cement solvent including testing complete all as specified and directed. |
| 81 | M & L for PCC 1:3:6 type C2 (using 40 mm graded granite stone aggregate) in concrete bed to drain pipes including packing under and haunching against the sides of pipes after they are laid and tested for pipes of 150mm bore complete all as specified and directed. |
| 82 | Removing Excavated soil exceeding 250 M but not exceeding 500 M and depositing where directed at a level not exceeding 1.5 M above the starting point complete all as specified and directed. |
| 83 | M & L providing precast cement concrete 1:2:4 type B1(20mm graded aggregate) as in cover slab for manholes, landing etc. setting in cement mortar 1:6 including necessary formwork complete all as specified and directed. |
| 84 | M&L for Cement concrete 1:2:4 in haunching and benching for manholes complete all as specified and directed. |
| 85 | Removing the existing covers of septic tank & cleaning the same of any size / capacity by dewatering and taking out sludge in liquid, mud, silt or in solid state after emptying the water by manual or by mechanical means and removing the sludge complete all as specified and directed incl disposal of sludge / containted works Out side the defence area to a place designed for the same by the civil authrities for dumping of sludge / contement water after cleaning incl covers to be put back to its place all as directed by Engi-in-charge. |
| 86 | Construction of brick masonary septic tank 25 users capacity with excavation and earth work in hard/dense soil or in soft/disintegrated rock PCC 1:2:4 type B-2 as in foundation, brick work in CM 1:4, RCC M-25, CI manhole cover (HD), vent, shaft and sludge chamber etc complete all as specified and directed |
| 87 | Soakage wells excavation, in any type of soil, foundation in PCC 1:3:6, walls of honey combed masonary with top ring of M25 concrete including intercepting chamber and screen chamber made of brick masonary in CM, RCC cover slab in M25/SFRC cover, interconnecting pipes of RCC/DWC complete filled with brick bats of size 3m dia X 4.5m effective depth |
| 88 | M & L for Surface channel in concrete 1:2:4 (20 mm graded aggregate) for drain complete all as specified and directed. |
| 89 | Extra for forming fair finished drain or channel 30 cm inner girth in cement complete all as specified and directed. concrete, using extra cement, including forms, moulds, mi-tred/stopped ends etc.All as specified and directed. |
| 90 | Surface excavation not exceeding 0.30m deep and averaging 15 cm deep getting out hard/dense soil all as spd & directed by Engr-in charge . |
| 91 | Rough excavation not exceeding 1.5 m deep and getting out hard/dense soil complete. |
| 92 | Rough excavation exceeding 1.5 m and N. exceeding 3.00m deep and getting out hard/dense soil complete. |
| 93 | Excavating in trenches, not exceeding 1.5m wide and not exceeding 1.5m in depth for foundation, etc or n. exc.10 Sqm on plan and n. exc. 1.5m in depth for shafts, cesspits, manholes, pier holes, etc and getting out hard/dense soil complete. |
| 94 | Returning, filling in, including spreading, levelling, watering & well ramming in layers n. exc 25 cm in soft/loose soil. |
| 95 | Spreading & levelling in layers n exc. 25 cm thick & well ramming incl. watering as required |
| 96 | Removing excavated soil n exc. 50m & depositing where directed at a level n exc. 1.5 m above the starting point |
| 97 | M&L for cement concrete 1:4:8 type D2 (using 40 mm graded stone aggregate) as in foundation, filling & mass concrete complete all as specified and directed. |
| 98 | M/L for Rcc Design Mix M-25 type B-1 using 20mm graded aggregate as in foundations, including rafts, footings, foundation beams; plinth beams; bases for columns, etc.; basement slabs, under-reamed piles complete (reinforcement to be measured separately). |
| 99 | M/L RCC Design Mix M-25 type B-1 using 20mm graded stone aggregate in columns, pillars, posts & struts complete (reinforcement to be measured separately). |
| 100 | M&L RCC design Mix M-25 type B1 using 20 mm graded aggregate in Beams, cantilevers, bressummers, lintels over 1.5m span |
| 101 | 40mm thick Damp proof course to horizontal or vertical surfaces including necessary formwork in PCC (1:2:4) type B-0 using 12.5mm graded stone aggregate |
| 102 | Applying evenly a coat of blown type bitumen @1.50 kg / Sqm and blinding with clean dry sand @ 0.05 Cum/ Sqm |
| 103 | Polythene film, 150 micron thick, laid on a coat of bitumen primer, @ 0.30 to 0.50 kg /Sqm |
| 104 | M&L RCC Design Mix M-25 type B1 using 20 mm graded aggregate in Slabs supported on walls, beams and columns in floors, roofs, landings, blaconies, canopies, deck slabs and in shelves and the like |
| 105 | Use and waste of form work to sides of concrete foundation, footing, bases of columns, raft and raft beams, sides and soffits of foundation and plinth beams and similar work vertical or to batter, flat, rough finish surface of concrete complete all as specified and directed. |
| 106 | M/L Form work to sides of square or rectangular columns, pillars, posts and struts for rough finished surfaces of concrete complete. |
| 107 | Formwork to sides & soffits of floor or roof beams, beam haunchings, girders, bressum-mers, lintels, cantilevers, shelves including supports, overhangs, etc. also splays between floors & beams, etc. Fair finished surfaces of concrete flat. |
| 108 | Formwork to soffits of suspended slabs such as roof slabs, floor slabs, landings & similar work; not exc. 200mm thick (Horizontal or sloping) Rough finished surfaces of concrete flat. |
| 109 | S&F mild steel TMT bar 10 mm dia and over, as in reinforcement, cut to length, bent to shape etc, including binding with and including mild steel wire (annealed) not less than 0.9 mm dia complete all as specified and directed. |
| 110 | -do- but 6mm to 8mm dia. |
| 111 | -do- but 5mm dia and over upto and including 10mm dia in stirrups, spaces and binders complete all as spd. |
| 112 | M&L 75 mm thick cement concrete 1:4:8 type D-2 finished fair and even as in sub base Complete all as specified and directed. |
| 113 | M&L 25mm thick PCC type B-0, (1:2:4) using 12.5mm graded stone aggregate as in floor complete all as specified & directed |
| 114 | M/L for Virified Ceramic tiles dark shade/double charged/ultra charged 10 mm thick (square/ rectangular) polished, area of each tiles exceeding 0.42 sqm but not exceeding 1.00 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match complete. |
| 115 | M & L for screed bed or bedding layer 15mm thick in cement mortar(1:6) for laying floor finishes Complete all as specified and directed. |
| 116 | All as per item no 3 for dado /skirting Complete all as specified and directed. |
| 117 | M & L for Rendering 10mm thick in CM 1:3 on fair faces of brick work or concrete surfaces complete all as specified and directed. |
| 118 | M&L for rendering 5 mm thick on fair faces of brick work or concrete surfaces in cement mortar 1:3 and finished smooth and even in ceiling without using extra cement. |
| 119 | M/L for preparing newly plastered wall surfaces and applying two coat of distemper oil emulsion including alkaliresistant priming over 1mm thick wall care putty, complete all as specified . |
| 120 | S&F 18mm thick MDF Board both side finished as in wardrobe/ cup board shutter all as specified and as directed by Engineer-in-Charge. |
| 121 | S & F CABINET HANDLE, Finish Type: Stainless Steel complete all as specified and directed. |
| 122 | Supply and fix Continuous (piano) hinges width 30 mm mild steel , bright finish or eletrogalvanised complete all as specified |
| 123 | S&F three track aluminum powder coated sliding window with three sliding shutter , the size of outer frame three track 100 x 37x 1.50mm ( using two track for glazed window shutter and one track for wire gauged ) , the section shutter size 37x 18x 1.2mm)and glazing with 5 mm thick Transparency glass of poly carbone including all-around suitable rubber gasket and stainless steel wire cloth 0.36 mm nominal dia of wire and average width of aperture 1.4mm and fixed on aluminum flat and inserted in the frame of shutter with tracking arrangement each sliding window shall be provided with one number handle including aluminium grill type DG 102 and locking arrangement & 2 numbers’s sliding rollers of nylon with including all necessary fittings complete |
| 124 | S&F aluminium powder coated door with shutter and frame of aluminium section sliding type as per following specifications with and including round type aluminium handle, tower bolts, hinges, panes etc and as directed at site. Make Jindal or its equivalent approved make:- (a) DOOR FRAME : 100 x 44 x1.6 mm section for complete frame. (b) DOOR SHUTTER : Top & bottom rail of 100x44x1.6 mm, middle rail of 83 x 44 x 1.6mm, both styles of 83 x 44 x 1.6 mm size shall be used. (c) GLASS PANE : 5mm thick sun broken glass fixed with gasket with aluminium clip , jointing clips, glazing clips, rubber packing, screws etc. (d) Jointing cleats, glazing clips, rubber packing, anodized aluminium snap beading, screws, anodized aluminium fittings such as 100mm long 03 Nos. hinges, aluminium handles , aluminium tower bolts ,and mortice lock 6 Levers etc complete all as specified and directed |
| 125 | Hardcore of Broken stone/boulders gauge n exc. 63mm, deposited, spread & levelled in layers n exc. 15 cm thick, watered & rammed to a true surface |
| 126 | M&L form work to chullah hoods, chajjas/shelfs and similar items incl edges rough finished surfaces of concrete flat all as specified. |
| 127 | M&L RCC M-25 (Design Mix) as in chajjas/shelfs complete all as specified and as directed. |
| 128 | S & F 20mm Dia Aluminium alloy anodised curtain rod decorative fency type with brackets complete all as specified. |
| 129 | Applying three coats of white wash on new Ceiling surface including preparation of surface. |
| 130 | M & L for roof surface must be pressure-washed with water with, is to be used to and/ or remove all dirt, dust, chalking and waste products. Remove algae, mold by using bleach solution. 2 tiles joint repair all visible and joint more than 0.50mm and not giving hollow sound, on the tiles roof or at the junctions of flat roof & vertical parapet wall, pipe joints, should be cut and widen v shape with mechanical cutter in the size (6mm W x 6mm D) and fill with Dr. Fixit PMM methodology.Glass fiber apply Dr Fixit URP or Primeseal A on the well prepared groove, allow to cure tack free. Followed by filling all the joints covering the entire area uniformly with suitable chemical. Allow chemical to cure a minimum 24 hours. Apply minimum 50mm-100mm width 45 GMS glass Fibre mesh/ non-woven geo testile fleece with the coat of Dr Fixit Roofseal classic along the length of crack when the 1st coat is still in wet condition. Apply the second coat with an interval if 4-6 hours. Waterproofing: Apply a coat of Dr Fixit Roofseal classic (diluted with water in the ratio 2:1) as Self Priming 14.0-18.0 Sq. mt/litre.Allow coating to dry for 3-4 hours. Applt two coats of Dr Fixit Roofseal classic/litre/coat, without, the rate of application being the same for both the coats. This would ensure correct consumption of material that will deliver a total of DFT of microns. Allow the system to air cure for 5 days minimum. Check to see no void surface is left untreated/uncoated. The material having following technical specification as per ASTM D 6083 M- type II, Attains a Tensile strength of 2.5 N/mm2 confirming to ASTM D 2370: Elongation at break > 300% confirming ASTM D 2370, Adhesion to Concrete 2.0N/mm2 Confirming ASTM D 4541 and crack bridging ability up to 2mm, air cure the coating for 7 days before water pound test for 48 Hrs. The system comes with 7 year waterproofing warranty from service provider. For vertical surface : Apply 2 coat of Dr Fixit Roofseal classic with forced coverage of /litre/coat. Entire terrace should be coated with roofseal classic alongwith parapet walls needs to be enveloped with roofseal classic/Raincoat system. Make : Dr Fixit or equivalent (Note : The treatment should be carried out through authorised applicator only) |
| 131 | S&F Steel work in tubular trusses in RHS and SHS section including purlins RHS and SHS section special shaped washer etc. complete using ERW or induction butt welded tubes conforming to I. S.1161- 1979 grade St.-240 all as specified |
| 132 | S&F One piece Vitreous china wash down water closet (Pedestal Pattern) \\"snow white\\" with duroplast slim soft close seat cover & twin flush fittings, toilet paper holder, health fuaucet, PVC connection, angular stop cock (valve) (2 Nos) with flange etc all as specified in particular specifications. Note: Vitreous china wash down water closet (Pedestal pattern) cat Part No S1013208 trap 100mm of Cera or equivalent model of make specified. |
| 133 | S & F for snow white wall mounted 330x310x540mm flat back urinal with integrated wash basin and sensor tap (cera model No S4025101 or equivalent) with complete installation including necessary fittings complete all as specified and as directed by Engineer in Charge. |
| 134 | S & F for Aluminium anodised snap grid frame work for false ceiling comprising of following section for making partitions of 605 X 605 mm size fixed to walls with rawl plugs and screws and hang to roof with s 6 mm dia. G.I. (upto 1200mm length) adjusting levelfixed to roof slabs by means ofceilling cleats made out of G.I.flat 40 x 3 mm size 60mm long and expansion hold fasteners12.5mm dia. 40mm long complete all as specified. size of main tee shall be :-(i)36.5mmx25mmx1.4mm thick, Weighing 0.24Kg/Rm(ii)Cross Tee 23.5mmx36.4mmx1.4mm thick Weighing 0.191 Kg/Rm and (iii)Wall angle 40mmx25mmx2mm thick. Weighing 0.36 Kg/Rm |
| 135 | S & F 4 mm thick non asbestos fiber designer ceiling (E-board classic) board / tiles for insulation and accoustic purpose, 600 X 600 mm size fixed as in ceiling with and including dusting of surface complete all as specified and directed |
| 136 | Brickwork with sub-class `B' brick straight or curved on plan to any radius in half brick thick walls built in CM (1:4) |
| 137 | S&F Coloured Non Skid ceramic tiles 7 to 8mm thick (squares/rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over 15mm thick screed in CM(1:4) |
| 138 | S&F Butt hinges 100mm size, extruded aluminium alloy with galvanised mild steel hinge pin, anodised, type B-21 |
| 139 | S&F Aluminium, anodised, barrel tower bolts 150mm long of extruded section. |
| 140 | S&F Aluminium alloy, anodised, sliding door bolt 250mm long with hasp, staple (bolt type) & fixing clips of sheet, cast or extruded sections & fixing bolts & sliding bolts of extruded sections or cast aluminium alloy. |
| 141 | S&F extruded aluminium alloy handles 125mm size, fabricated type, anodised |
| 142 | M&L for 75mm thick cement concrete 1:3:6 type C-2 (using 40mm graded stone agg) as in plinth protection laid to slope in bays and finishing the surfaces of concrete topping fair and even and exposed edges fair or rounding or chamfering laid in panels. |
| 143 | Material & Labour for prepration of surfaces for New plastered or unplastered surfaces and applying Two or more coats of 100% remium acrylic emulsion paint havingVOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance,dirt resistance exterior paint of required shade(Company Depot Tinted) with silicon additives@ 1.43 litre/ 10 sqm over and including primingcoat of exterior primer applied @ 0.90 litre/ 10sqm over new surfaces |
| 144 | S&F GI Tubes, `medium grade' with all fitting & fixed complete to walls & ceilings or laid in floors of 15mm bore |
| 145 | S&F GI Tubes, `medium grade' with all fitting & fixed complete to walls & ceilings or laid in floors of 20mm bore |
| 146 | S&F Rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top) hoisted & fixed in position all as specified in SSR Part I 500 Ltrs Capacity |
| 147 | S&F CP Bib taps 15 mm bore, cast copper alloy with crtuch or butterfly handle,screwed down, screwed for iron pipe or for brass ferrule |
| 148 | S&F Gun-metal, globe or gate valves 15mm bore, with iron wheel head, screwed both end for iron pipe |
| 149 | S&F Gun-metal, globe or gate valves 20mm bore, with iron wheel head, screwed both end for iron pipe |
| 150 | S&F Cast iron 75mm bore sand cast soil, waste & vent pipes, in any length with or without ears with cement joints, laid in trenches or in floors |
| 151 | S&F Cast iron 100mm bore Sand cast soil, waste & vent pipes, in any length with or without ears with cement joints, laid in trenches or in floors |
| 152 | S&F Cast iron 100mm bore Bends (any radius), diminishing pieces or tapers (larger bore measured) |
| 153 | M&L Cast iron floor trap 75mm dia, with CP grating including jointing to waste pipe fixed in cement concrete type B1 (1:2:4) |
| 154 | S & F vitreous china wash basin, white, flat back, size 620mm x 480mmx185mm, wall hung Basin (flat back or angle back type) including brackets and including cutting for and pinning in ends of brackets or erecting stand, fixed Make i ( Jaquar cat Part No:- FNS-WHT-40801 ii ( Cera cat Part No :- 1067 A or Hindware Equivalent. |
| 155 | M & L for Brass chromium plated bottle traps (32mm bore) for wash basins with inlet and outlet screwed for pipe or connectionsincluding necessary packing, union and cap and fixed complete all as specified and direcetd. |
| 156 | S & F for Vitreous China Urinal, full stall type, white (excluding flushing cistern, flush pipe and waste pipe) |
| 157 | S & F for PVC connections 15mm size with PTMTnuts of length 450mm complete all as specified and direcetd. |
| 158 | S & F aluminium Hat pegs, solid body, 125 mm to 175 mm |
| 159 | S&F Aluminum anodized Tubular towel rail 20mm dia, D type, 60cm long between flanges |
| 160 | S & F for paper holder of vitreous china fixed to walls with chromium plated (CP) brass screws complete all as specified and direcetd. |
| 161 | S&F 15mm bore angle cock CP, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed complete all as specified and directed. |
| 162 | S&F 600x750mm size mirror of selected quality 4mm thick glass, mounted on 6 mm thick commercial ply wood and alaround teak wood beding fixed chromium plated brass screw complete all as spd and directed. |
| 163 | S & F 12mm thick tempered glass urinal partition with steel frame including all cuts & holes for fixing in size & design as approved by GE complete all as specified |
| 164 | M&L for rendering 15mm thick in CM 1:6 on fair faces of brick work or concrete surfaces finished even and smooth without using extra cement complete all as specified and directed |
| 165 | M & L for PCC 1:3:6 type C-2 (using 40mm graded stone aggregate ) as in foundation & mass concrete , bed of manhole etc, complete all as specified and directed. |
| 166 | M & L DWCPE (SN8) 180 (OD)/163(ID) mm diameter Pipes laid in trenches and jointed as required complete all as specified and directed. |
| 167 | Excavation over areas n exc 1.5 mtr deep and getting out in hard & dense type of soil complete all as specified and directed. |
| 168 | -ditto- as per item No 2 but depth exceeding 1.5 mtr and n.exc. 3.00 mtr -ditto- |
| 169 | M&L for RCC M-25 design mix as in walls, retaining walls, basement walls, ballast walls and the like of any thickness above top of footing including attached pilasters and buttresses complete all as specified and directed. |
| 170 | Use and waste of form work to walls, retaining walls, basement walls, ballast walls and the like including attached pilasters and buttresses and similar work vertical or to batter, flat, fair finished surface of concrete complete all as specified and directed. |
| 171 | Hand packing of broken stone ( any thickness) at back of the retaining wall etc and raising and lowering to required level complete all as specified and directed. Note:- Stone obtained from srl item No 4 shall be used. |
| 172 | M & L for Walling of random rubble,uncoursed, well bonded, bedded and solidly hearted, built in CM 1:6 complete |
| 173 | S&F PVC (SWR) pipes 110mm bore single socketed in any length with rubber ring joints complete all as spd. |
| 174 | Taking down carefully Aluminium/copper wiring of any size (for light, fan, socket or power etc complete) ( fittings such as switches, sockets, ceiling roses, pendent holders regulators, tube lights etc to be measured and paid separately) and making good disturbed surfaces of wall, roof etc to match with existing surface complete all as specified and directed. |
| 175 | M & L point wiring for Modular fittings for one light point/ fan/ bell/ 5Amps socket out let (independent)point controlled by one, one way switch with 1.5 sqmm size, PVC insulated and unsheathed 1100volts grade, single core stranded (multistrand) copper conductor (FR-LSH) PVC cable drawn into & including medium grade PVC conduit (not less than 20mm outer dia )with all fittings and accessories fixed concealed (including chase cutting in brick/ stone masonry walls for fixing conduit and plastering and whitewash/colouring the external surface and matching the same with existing surface) including one continuous run of PVC insulated (green colour) 1.5 Sqmm multistranded copper conductor cable earth wire and connected to earth dolly complete all as specified and directed (a) One light/One fan/one bell point controlled by one modular switch |
| 176 | One modular socket outlet 3 pin 6 amps controlled by one switch on same board. |
| 177 | One modular socket outlet 3 pin 6 amps controlled by one switch on independent board. |
| 178 | All as per item No 2 herein before but wiring with 2.5 sqmm copper wire (FR-LSH) PVC and 2.5 sqmm earth wire for modular socket outlet 5 pin 16 amps on independent board. |
| 179 | S & F Modular metal flush box of 2 Module complete all as specified and directed |
| 180 | S & F Modular White cover plate with frame of 2 Module complete all as specified and directed |
| 181 | S & F Modular metal flush box of 6 Module complete all as specified and directed |
| 182 | S & F Modular White cover plate with frame of 6 Module complete all as specified and directed |
| 183 | S & F Modular metal flush box of 3 Module complete all as specified and directed |
| 184 | S & F Modular White cover plate with frame of 3 Module complete all as specified and directed |
| 185 | S & F Modular metal flush box of 1/2 Module complete all as specified and directed |
| 186 | S & F Modular White cover plate with frame of 1/2 Module complete all as specified and directed |
| 187 | S & F Modular metal flush box of 4 Module complete all as specified and directed |
| 188 | S & F Modular White cover plate with frame of 4 Module complete all as specified and directed |
| 189 | Supply and fix modular type switch single pole, one way 6 Amp complete all as specified and directed. |
| 190 | Supply and fix socket out let multi 5 pin, 6 Amps, modular type complete all as specified and directed. |
| 191 | Supply and fix switch modular type single pole, one way 16 Amp complete all as specified and directed. |
| 192 | Supply and fix socket out let 2 in1,3 pin, 6 and 16 Amp, modular type complete all as specified and directed. |
| 193 | S&F ceiling rose, PVC/ Poly carbonate,isolated body three terminal complete all as specified and directed. |
| 194 | S & F lamp holder angle type PVC/Poly carbonate type insulated body with back plate suitable for batten/wall fitting complete all as specified and directed. |
| 195 | Supply and fix in replacement High quility LED T8 indoor batten tube light 20 Watt with aluminium extrusion in D shaped have large diameter for increased convection heat transfer incl one LED PC tube rod and driver, internaly pre wired of 1.5 sqmm twin twisted flexible cable all as specified & directed.NOTE: The contractor must submit 5 years warranty for LED fitiings. |
| 196 | Supply and fix in replacement High quality LED smart batten tubelight 20 W, aesthetically designed LED having extruded aluminum housing with Microwave motion technology for providing an energy efficient solution and with aluminum housing & integrated electronic driver., internaly pre wired of 1.5 sqmm twin twisted flexible cable of make Havells with cat part no.LUMILINESMART20WLED865PCWH or equivalent, Including marking of CA No on batten all as specified & directed.NOTE: The contractor must submit 5 years warranty for LED fitiings. |
| 197 | S&F in replacement MCB SP, 240 volts,AC C curve, 10 KA 6 to 32 Amps complete all as specified and directed |
| 198 | S&F in replacement MCB SPN , 240 volts,AC B curve, 10 KA 40 Amps complete all as specified and directed |
| 199 | S&F sheet metal enclosure in replacement single pole and neutral with a two pin and earth plug and socket complete with one single pole MCB 240 Volts 20 Amps including one 15 Amp switch on existing board with wiring for switching geyser on/off complete all as specified and directed. |
| 200 | Supply and fix in replacement LED street light fitting 35 Watt 230 V AC outdoor type with high pressure die cast aluminum hosing and heat resistant complete with driver, lamp bracket with impact and corrosion resistant including thermal management in multiple optics complete with IP 66 protection complete. all as specified and directed .NOTE : The contractor must submit 5 years warranty for LED fittings |
| 201 | S&F in replacement sheet metal enclusure for DBs(double door type) single pole and neutral 4 way including blanking platge as required with 200 Amps rated bus bar, 240 volts fixed complete all as specified and directed . |
| 202 | S&F in replacement sheet metal enclusure for DBs(double door type) single pole and neutral 12 way including blanking platge as required with 200 Amps rated bus bar, 240 volts fixed complete all as specified and directed . |
| 203 | S & F in replacement LED bulk head fitting, 1 x 10 watt with PDC aluminium housing and milky diffuser including LED light driver holder, complete with all accessories and including connecting up with three core twisted flexible copper conductor cable with suitable size of 230 Volts, 50 Hz complete all as specified and directed. NOTE: The contractor must submit 5 years warranty for LED fittings |
| 204 | S & F in replacement for earthing complete with galvanised steel, earth plate electrode 600x600mm x 6mm thick burried directly in ground verticaly (earth pit not less than 2.25 mtrs below ground level ) with top edge of the plate not less than 1.5 mtrs below normal ground level connected to galvanised earth lead wire 4 mm dia by means of bolts, nuts, check nuts and washers of galvanised iron/steel all as shown in electrical plate No 3 on page 497 of MES schedule 2009 part - I connected to main switch board/main DBs/earthing test point including all necessary excavation and earth work in hard/dense soil common salt and charcoal dust mixed and packed 150mm thick all round the GI earth plate, watering pipe 20mm dia GI medium grade. GI sheet 0.63 mm thick funnel, wire gauge, 50mm thick RCC cover in PCC 1:2:4 type B1 duly reinforced with MS round bars 6mm dia @ 150c/c both ways and pit/chamber in PCC 1:3:6 type C1 with suitable lifting handle to cover, GI protection pipe 15mm dia light grade up to 7.5mtr from electrode GI pipe to be fixed with complete all as specified and directed.Note :- (i) Earth lead beyond 7.5 mtr from electrode to earth terminal point/main switch & GI pipe light grade 15mm dia for protection against mechanical damage to lead shall be measured separately. (ii) On testing after completion if desired earth resistance is not obtained, the earthing will be redone at no extra cost. |
| 205 | S& F LED Bulb of 9 watt as specified .NOTE: The contractor must submit 5 years warranty for LED fittings |
| 206 | Supply and fix in replacement Geyser 25 Ltr Capacity ,CRCA Metallic body,Stainless Steel (SS) Inner tank, BEE five star rating, heating element upto 2 KW, ISI mark, with all accessories such as safety valve, thermostate, NRV, connection piece etc & making 04 Nos hole and grouting of suitable size of nuts and bolts and making good as per existing surface |
| 207 | Supply and fix in replacement LED light fitting mirror type with high out put diffuser 2 feet, 10 watt 220 V AC decorative type with driver holder and LED lamp including connecting up with two core flexible copper conductor cable of suitable size complete all as specified and directed. NOTE: The contractor must submit 5 years warranty for LED fittings |
| 208 | S&F in replacement Exhaust fan metallic bady ISI mark, 300 mm size with louvers including cutting openings, through brick/ stone wall , making of holes and grouting of suitable size of nuts and bolts for 300 mm exhaust fan and making good dismantled portion and making connection with wire of suitable size and connecting accesssories complete all as specified and directed. |
| 209 | Supply and fix High quility LED T5 integrated batten tube light 20 Watt with aluminium extrusion with frosted PMMA/PC diffuser, internaly pre wired of 1.5 sqmm twin twisted flexible cable incl connection with ceiling rose all as specified & directed. |
| 210 | Supply and fix High quility LED lighting fixture mirror type with high output diffuser 2 feet 1x 5 Watt. 220V AC,complete with polycarbonate tube, white/warm white suitable for mirror light internally pre wired of 1.5 sqmm three core flexible cable complete all as specified & directed. |
| 211 | Supply and fix exhaust fan made of sturdy Engineering plastic complete with louvers shutter, voltage 230V, 50 Hz,RPM 1200, Copper winding of sweep 250mm including cutting openings, through brick/ stone wall , making of holes and grouting of suitable size of nuts and bolts for 250 mm exhaust fan and making good dismantled portion and making connection with wire of suitable size and connecting accesssories complete all as specified and directed. |
| 212 | S & F Recess/surface mounting LED luminaire 600mm x 600 mm ,36 W, 220V, with high efficiency PMMA diffuser soft glare free light suitable for recessed/ surface mounting ,with powder coated CRCA housing with LEDs, seamless front frame complete with driver and all accessories internally pre-wired and including necessary cutting as required in panel and connecting up with twin core twisted flexible copper conductor cable with suitable size complete all as specified and directed. |
| 213 | S & F surface suspended LED circular luminaire, 25 W, 230 volt, suitable for suspended mounting with CNC stretch bent extruded aluminium in powder coated housing panel for surface mounting with an effective height of 70 mm and produces diffused planar and low glarel illumination complete with driver and all accessories internally pre wired and including suspension kit and surface mounting kit and connecting up with twin core twisted flexible copper conductor cable with suitable size complete all as specified and directed of make Havells cat part No.- TORUS600RDP/S25WLED857SPMMAWH or its equivalent cat part in make Bajaj,CromptonNOTE: The contractor must submit 5 years warranty for LED fitiings. |
| 214 | S&F sheet metal enclusure for DBs(double door type) single pole and neutral 8 way including blanking platge as required with 200 Amps rated bus bar, 240 volts fixed complete all as specified and directed . |
| 215 | Supply, laying, and testing in replacement cable XLPE insulated screened, PVC bedded galvanized steel strip or wire armoured, electric power cables (heavy duty) 1100 volts grade with stranded aluminium conductor of size 16 sqmm 2 core complete all as specified and directed. |
| 216 | Excavation in trenches not exceeding 1.5 m wide and not exceeding 1.5 m deep for laying of underground cable and getting out in any type of soil complete all as directed by the Engineer-in-Charge |
| 217 | M&L for sand cushioning in trenches spreading and consolidation 8cm thick before laying the cable & 15 cm of sand after laying the cable complete all as specified |
| 218 | M&L for laying of bricks well burnt sub class ‘B’ (old pattern) laid flat for cable protection width equal to the lengrth of brick complete all as specified . |
| 219 | M & L galvanised steel water tubing 'light grade' 40 mm bore with all fittings laid under the roads, drains, culverts and fixed on poles etc complete all as specified and directed . |
| 220 | S&F in replacement service connection cable, 1100 volts grade heavy duty PVC insulated aluminium conductor, 16 Sqmm 2 core size, served with inner sheathing of PVC tape and overall PVC sheathed in service connections suspended by insulating hangers not more than 1 metre apart including 4mm suspension wire, one twin core cable flat or circular, complete all as specified and directed. |
| 221 | S&F in replacement service connection cable, 1100 volts grade heavy duty PVC insulated aluminium conductor, 16 Sqmm 2 core size, served with inner sheathing of PVC tape and overall PVC sheathed in service connections suspended by insulating hangers not more than 1 metre apart including 4mm suspension wire, one twin core cable flat or circular, complete all as specified and directed. |
| 222 | M & L galvanised steel water tubing 'light grade' 25 mm bore with all fittings laid under the roads, drains, culverts and fixed on poles etc complete all as specified and directed . Please Enable Macros to View BoQ information |
| SR No | FileName | File Description |
| 1 | Click here to download tender document | Tender Documents |
| 2 | Click here to download tender document | Tender Documents |
| 3 | Click here to download tender document | Tender Documents |
| 4 | Click here to download tender document | Tender Documents |
We are a group of professionals specializing in custom software development, web development, mobile app development, IOT base solutions, web design, graphics & Enterprise solutions provid.
Copyright © 2026 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail
