|
| 1 | Taking down chowkats or frames with shutter (without taking off shutter from the frames) n. exc 1.50 Sqm each complete all as specified and directed. |
| 2 | Taking down chowkats or frames with shutter (without taking off shutter from the frames) exc. 1.50 Sqm but n.exc 4 Sqm each complete all as specified and directed. |
| 3 | Taking down shutters of any description exc. 1 Sqm but n. exc. 2.0 Sqm each complete all as specified and directed. |
| 4 | Resecuring or easing & adjusting of shutters without taking down of shutters of any description not exc 2.0 Sqm each complete all as specified and directed. |
| 5 | S&F factory made solid PVC door frame of size 50 mmx47 mm made out of 5mm thick wood grain printed PVC sheet used instead of plain colour PVC sheet & edges will be painted to match with printed sheet reinforced MS square tube supplying & fixing in opening as per specification & drawing complete all as specified and directed. |
| 6 | S&F factory made solid PVC moulded door shutter 28 to 30 mm thick (stiles, with particle board core) with 2,4, or 6 raised panel design with 2mm thick Moulded PVC sheet on the front face & 2mm plain colour PVC sheet on back face, supplying & fixing in frame at site as per specifications and drawing of page no 146 of SSR Part -II complete all as specified and directed. |
| 7 | S&F 2nd class hardwood plain solid, straight chowkat and frames, wrought, framed rebated on the solid, rounded or chamfered put together with glue pinned at joints all as specified in and directed. |
| 8 | S&F 35 mm thick, 2nd class hardwood glazed and skeleton shutters, open rebated and prepare to receive gauge etc (without sash bars) edges of framing plain, chamfered or rounded fitted with cut and mitred beads for secruing glass/gauge etc size of member of shutter as specified in SSR Part-I Section 8 Clause 8.20 (a), fitted to chowkats complete all as directed. |
| 9 | S&F 30 mm thick flush shutters solid core construction, with particle board core and ply wood face panels commercial type on both sides complete all as specified and as directed. |
| 10 | S&F35mm factory made plain framed, panelled shutter (two panel) with lock rail and panel of 9 mm BWP commercial ply or 12 mm veneered particle board with commercial veneering on both faces. The size of rail and stile as per IS-1003 (Part - I) kiln seasoned and chemically pressure treated (35 mm thick with 2nd class HW rail and style) complete all as specified and directed. |
| 11 | S&F butt hinges, cast brass, with mild steel hinge pin, bright polished of size 100 mm complete all as specified and directed. |
| 12 | S&F MS butt hinges medium weight cold rolled of size 100 mm complete all as specified and as directed . |
| 13 | S&F in repair MS butt hinges medium weight cold rolled of size 100 mm complete all as specified and as directed . |
| 14 | S&F 250 mm long aluminium alloy anodised sliding door bolt with hasp and staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy complete all as specified directed, |
| 15 | S&F in repair 250 mm long aluminium alloy anodised sliding door bolt with hasp and staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy complete all as specified directed, |
| 16 | S&F 150 mm long aluminium anodised barrel tower bolt of extruded section complete all as specified and directed. |
| 17 | S&F in repair 150 mm long aluminium anodised barrel tower bolt of extruded section complete all as specified and directed. |
| 18 | S&F Extruded aluminium alloy handles 150 mm long fabricated type anodised complete all as specified and directed. |
| 19 | S&F in repair Extruded aluminium alloy handles 150 mm long fabricated type anodised complete all as specified and directed. |
| 20 | Resecuring or easing & adjusting of shutters without taking down of shutters of any description exc 2.0 Sqm each complete all as specified and directed. |
| 21 | S&F in repair stainless steel door stopper with solid stem and rubber end fixed to doors all as specified and as directed |
| 22 | Hacking out old broken glass (any thickness, size, quality or description) from wooden frames or stone, concrete or brick surrounds, glazed with putty or fixed with beadsarea exceeding 1.5 sqm complete all as specified and directed. |
| 23 | S&F new sheet glass 4.8 mm thick ordinary quality and glazing with oil putty or glazing pins / spring clip in square, rectangle n exc 0.5 sqm in each pan all as specified and as directed. |
| 24 | S&F old sheet glass 4.8 mm thick ordinary quality and glazing with oil putty or glazing pins / spring clip in square, rectangle n exc 0.5 sqm in each pan all as specified and as directed. |
| 25 | S&F stainless steel wire cloth 0.36 mm nominal dia of wire and average width of aperture 1.40 mm and fixed with tinned tacks or stainless steel wire staple complete all as specified and directed |
| 26 | S&Fin repairs stainless steel wire cloth 0.36 mm nominal dia of wire and average width of aperture 1.40 mm and fixed with tinned tacks or stainless steel wire staple complete all as specified and directed including down old one. |
| 27 | Cutting holes in brick walls exc one brick but not exc two brick in mud mortar for inserting holdfasts and making good dismantled portion in cement mortar (1:3) or cement concrete (1:2:4) Type B-1 as required complete all as specified and directed. |
| 28 | S&F mild steel flat iron as in hold fast for door window frames or chowkat etc. cut to length or drilled hole and fixed with screw etc. complete all as directed grade of steel conforming to Fe-290 Gde-E-165 complete all as specified and directed. |
| 29 | S&F in repair wall mixer, cast copper alloy, screwed down, high pressure (chromium plated) with provision for overhead shower with 115mm long bend pipe on upper side, connecting legs & wall flanges etc. complete for fixing with 15 mm dia pipe, complete all as specified and directed. (Make: Jaquar FUS Wall Mix 3 in 1 -29281) |
| 30 | S&F in repair 10 Ltr capacity PVC valveless syphonic action type flushing cistern low level white, with inlet, ball valve, float and handle including PVC flush pipe and brackets complete fixed in wall and floor to trap of WC as required and as directed |
| 31 | S&F in repair angular stop cock (chromium plated fancy type) 15 mm dia, cast copper alloy, screwed down, high pressure with crutch or butterfly handles, screwed both end for iron pipe or for unions complete all as specified and directed |
| 32 | S&F in repair 15 mm bib tap, cast copper alloy fancy type chromium plated with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule complete all as specified and directed |
| 33 | S&F in repair tubular Towel rail chromium plated 20mm dia 'D' type 600 mm long including brass screws and wooden / plastic cleats complete all as specified and directed |
| 34 | S&F in repair corner/wall mounted sheet glass shelf assembly consisting of 5.5mm thick sheet glass shelf 12 cm wide with chromium plated bracket guard and railing 60cm long complete all as specified and as directed |
| 35 | M&L in repair Vitreous China wash basin, white, flat back, size 550x400 mm including suitable size of CI brackets, brass chromuum plated waste fittings 32 mm dia with long screw shanks and fly nuts, chain and plug and porcelain stopper but including brackets complete all as specified and as directed |
| 36 | S&F in repair 15mm dia pillar tap fancy type, cast copper alloy, with capstan heads, chromium plated, screwed down high pressure, with or without lettered 'Hot' or 'Cold' with long screwed shanks and fly-nuts, screwed for iron pipe and fixed complete all as specified and as directed including taking out old one. |
| 37 | S&F in repair chromium plated shower roses with swivel joints, 125mm size including fixing to steel pipe or union all as specified and directed |
| 38 | S&F in repair chromium plated hand shower helth faucet ABB body with 8 mm dia. 1.00 m long CP flexiable pipe 15 mm bore with wall hook complete all as specified and directed including taking down old one. |
| 39 | S&F in repair PTMT grating round of size 125mm dia with waste hole of approved design complete all as specified and as directed |
| 40 | S&F in repair plastic water closet seat, black, closed pattern with flat bottom, and cover and mild steel chromium plated or aluminised hinging device complete all as specified and as directed. |
| 41 | S&F in repairs sinks with drainage board made of stainless steel 1mm thick kitchen or laboratory with plugs, washers and wastes; including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe overall size 915mm x 460mm bowl size 410mm x 330mm x 160mm complete all as specified and as directed. |
| 42 | S&F in repair 25mm dia Powder coated aluminium curtain rod with catrip type fixed on walls complete all as specified and directed |
| 43 | S&F in repair 25mm dia Powder coated aluminium hooks/brackets fixed on walls complete all as specified and directed . |
| 44 | S&F in repair 15 mm dia basin mixer cast copper alloy, chromium plated, single lever, without popup waste, 450 mm braided hoses with capstan head, high pressure with long screwed shanks and fly nuts screwed for iron pipes complete all as specified and directed. |
| 45 | Demolition of brick work or stone/boulder masonry, built in lime mortar including all quoins, arches, pillars, ect but excluding dressed stonework and precast concrete articles. |
| 46 | M&L for brickwork with subclass 'B' bricks, straight or curved on plan exc 6m mean radius built in CM(1:4) all as specified. |
| 47 | Taking down cement plaster on brick or concrete wall/ceiling etc including racking out joint hacking for key, scrubbing down with water etc. complete all as specified and as directed. |
| 48 | M&L 15mm thick plastering in cement mortar on brick/concrete wall surfaces in CM (1:6) and finishing the surfaces even and smooth without using extra cement complete all as specified & directed. |
| 49 | M&L for rendering 5 mm thick in cement mortar (1:3) on concrete surfaces as in ceilings and finishing the surfaces even and smooth without using extra cement complete all as specified & directed. |
| 50 | M&L preparing new surfaces of walls and applying two coats of oil emulsion distemper over a coat of alkali resistant primer complete all as specified and directed. |
| 51 | M&L for preparing new surfaces of ceiling and applying two coats of oil emulsion distemper over a coat of alkali resistant primer complete all as specified and directed. |
| 52 | Dismantling floor hearth or wall tiling including cement mortar bedding (but not backing) removing serviceable tiles to store and rubbish off the premises complete all as specified and as directed. |
| 53 | M&L for coloured printed glazed ceramic tiles in vertical surface 450 x 350 x 7 mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match including 10 mm thick plastering in cement mortar (1:4) brick or on concrete surfaces of wall and finishing the surfaces fair and even without using extra cement all as specified and directed as in backing of tiles complete all as specified and directed. |
| 54 | S&F Non skid ceramic coloured tiles 7 to 8mm th area of each tile exceeding 0.06sqm but not exc 0.11 sqm in floors etc. set and joined in neat cement slury and pointed in coloured cement to match including screed bed or bedding layer 15 mm thick in cement mortar (1:6) on floors for laying floor finish all as specified and as directed. |
| 55 | M&L for vitrified ceramic tiles 10mm thick (Square/rectangular) polished, area of each tiles not exceeding 0.36 sqm in floors etc set and jointed in neat cement slurry and pointed in white or colured cement to matches light shed including screed bed or bedding layer 15 mm thick in cement mortar (1:6)on floors for laying floor finish complete all as specified and as directed. |
| 56 | M&L for vitrified ceramic tiles 10mm thick (Square/rectangular) polished, area of each tiles not exceeding 0.36 sqm in floors etc set and jointed in neat cement slurry and pointed in white or colured cement to matches light shed including rendering 10 mm thick in cement mortar (1:4) on wall for laying floor finish complete all as specified and as directed. |
| 57 | M&L for PCC (1:2:4) type B1(20 mm graded stone aggregate) as in bed block for embedding hold fast of doors, window frames or chowkats including necessary form work complete all as all as specified directed. |
| 58 | M&L for cleaning of aluminium window sliding channels oiling to roller, tightning to lock, hinges, rubber gasket etc all as specified and as directed. |
| 59 | S&F in repair 600 x 450mm bevelled edge mirror of selected quality glass, mounted on 6mm thick AC building board or commercial plywood and fixed to wooden plugs with chromium plated brass screws and cup washers complete all as specified and as directed |
| 60 | M&L for oiling and greasing of rolling shutter of any size and any patterrn incl scrubbing down old greasing complete all as specified and as directed. |
| 61 | S&F in repairs Ball bearing for rolling shutters of suitable size all as specified and directed. |
| 62 | Taking down aluminium window/ventilator with side hung,top hung or fixed type, sliding shutter of any description complete all as specified and directed. |
| 63 | S&F anodised aluminium door/ window / ventilator shutters, sliding type with styles, rails, sash bar, sliding frame etc. all are made from anodised aluminium section all are made from anodised aluminium section weighting 0.55 kg / m including necessary jointing cleats, glazing clips, rubber packing, anodised, aluminium snap beadings, screws , aluminium handles, locking system etc complete all as specified and directed. |
| 64 | Providing and fixing Powder coated aluminium (minimum thickness of powder coating 50 micron) work for doors, windows, ventilators and partitions (Fixed portions) with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS:1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPD Mrubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing/ paneling, C.P. brass/ stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-Charge |
| 65 | Dismantling of stone slabs & tiles of any description or thickness in floor, aprons etc. complete all as specified and as directed. |
| 66 | M&L Granite (of any type) slab, 20 mm thick machine cut laid over cement screed as in floor and jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of the granite stone including cutting and polishing Screed bed or bedding layer of mortar 15 mm thick in CM (1:4) for laying floor finishes complete all as specified and directed |
| 67 | S&F in repair anodised aluminium grill, having mesh size 100mmx100mm made out 4mm wide and 3mm thick aluminium section with MS hooks of 6mm round bars two numbers each side insert into the jambs/cill complete all as specified and directed |
| 68 | M&L in repair for replacement of old spindle / washer including head for 15 mm dia brass wall mixer / basin mixer complete all as specified and directed. |
| 69 | S&F in repair PVC flush / waste pipe 32/40 mm dia 1150 mm long fixed to walls complete all as specified and as directed |
| 70 | S&F in repair 15 mm dia PVC connections, 450 mm long with PTMT nuts of suitable size at two end complete all as specified and directed |
| 71 | S&F in repair Ball valves high pressure of PTMT with PTMT arm & highdensity plastic ball screwed for PVC Connection and fixed in cistern of 25mm dia pipe all as specified and as directed |
| 72 | S&F in repair 20mm Gun-metal, globe or gate valves, with iron wheel head, screwed both ends in PPR pipe line and fixed complete all as specified and directed. |
| 73 | S&F in repair vitreous China Wash down water closet pan (Pedestal Pattern), white fixed with brass screws with necessary connection with water line and sewer line etc. complete including PVC seat cover for pedestal pan complete all as specified and directed |
| 74 | S&F in repair vitreous china squatting pan, Orissa Pattern, size 580 x 440 mm white, with integral foot rests (excluding flushing cistern and flush pipe) with CI trap of suitable size ( P or S type) including connection to trap and to flushing pipe, anti syphonic pipe etc complete including provision of lime concrete bedding & making good to floor complete all as specified and directed |
| 75 | M&L for points of contact of wood work by chemical emulsion (in oil or kerosenebased solution) @ 0.5 litre/hole by drilling 6mm dia holes at adownwardangle of 45 degree at 150mm centre to centre and sealing the same complete all as specified and directed. |
| 76 | Providing and injecting chemical emulsion for Post Constructional Antitermite Treatment of voids in masonry using chemical emulsion one litre per hole, at 300mm intervals including drilling holes at 45 degree and replugging them with cement mortar (1:2) to match the existing floors complete all as specified and directed. |
| 77 | Supplying and laying in repair of 20mm bore CPVC pipes SDR 11 & Plain CPVC SDR 11 fittings on walls/ceiling or laying in floors complete all as specified including taking down old pipe. |
| 78 | M&L CPVC Brass fittings like Brass elbow / Tee / Sockets / Reducing sockets / MBTA / FBTA / Union / Adaptor etc. suitable for fixing with steel pipe 20 mm dia CPVC pipe fixed in wall / floor complete all as specified and directed. |
| 79 | Taking up or down 15mm steel tubing and connections including cleaning for re fixing or removal to store all as specified and directed. |
| 80 | M&L for Tubes, 'medium grade' 15mm galvanised,with all fitting and fixed complete to walls and ceilings or laid in floors all as specified and directed. |
| 81 | Taking up or down 25mm stee tubing and connections including cleaning for refixing or removal to store all as specified and directed. |
| 82 | M&L for Tubes, 'medium grade'25mm galvanised,with all fitting and fixed complete to walls and ceilings or laid in floors all as specified and directed. |
| 83 | S&Fin repair cast iron (sand cast) soil, waste and vent pipe 100 mm bore in any length, with or without ears, with cement joints, fixed with stack clamps out of 25x5 mm flat iron and 16mm dia round iron stays, including bolts and nuts and securing ends of stays to wall or roof complete all as specified and directed including taking down old pipe upto 4th storey |
| 84 | S&Fin repair cast iron (sand cast) soil, waste and vent pipe 100 mm bore in any length, with or without ears, with cement joints, fixed with stack clamps out of 25x5 mm flat iron and 16mm dia round iron stays, including bolts and nuts and securing ends of stays to wall or roof complete all as specified and directed including taking down old pipe upto 5th to 8th storey incl taking out old one |
| 85 | S&Fin repair cast iron (sand cast) soil, waste and vent pipe 100 mm bore in any length, with or without ears, with cement joints, fixed with stack clamps out of 25x5 mm flat iron and 16mm dia round iron stays, including bolts and nuts and securing ends of stays to wall or roof complete all as specified and directed including taking down old pipe upto 9th to 13th storey |
| 86 | S&F in repair 100 mm dia CI branch piece double, (equal or unequal) ordinary or inverted spigot or socketed type with oval access doors all as specified and directed |
| 87 | S&F in repair 100 mm dia CI branch piece single, (equal or unequal) ordinary or inverted spigot or socketed type with oval access doors all as specified and directed |
| 88 | S&F in repair cast iron bends 100mm bore of pipe (any radius ) with ducks foot or heel rest complete all as specified and directed. |
| 89 | S&F in repair Cast iron floor trap 100 mm, setting and jointing to waste pipe fixed in cement concrete type B1 (1:2:4) complete all as specified and directed including taking out old one. |
| 90 | S&F in repair 100mm diameter of outlet cast iron Nahani trap, with grating including jointing to waste pipe fixed in cement concrete type B-1 (1:2:4) all as specified. |
| 91 | S&F PVC mirror cabinet of size 400 mm x 500 mm with mirror at front view fixed with brass screws and wooden / plastic cleat complete all as specified and directed. (Make :- Prayag, Cat No. 554 or equivalent) |
| 92 | S&F in repair stainless steel kitchen rack of sie 750mm x 750mm x 300mm with 4 shelf made out of 0.8 mm thick sheet fixed with suitable size cromium plated screws complete all as specified and directed including taking out old one |
| 93 | M & L for one coats of distemper oil emulsion including preparation of old plastered surfaces of wall complete all as specified and as directed work upto 4th storied. |
| 94 | All as per item no 93 above but for 5th to 8th storied complete all as specified and directed. |
| 95 | All as per item no 93 above but for 9th to 12th storied complete all as specified and directed. |
| 96 | All as per item no 93 above but for 13th storied complete all as specified and directed. |
| 97 | Complete removal of existing treatment Washing, rubbing down and stopping of distempered and painted surfaces providing and applying plaster of paris putty of 2 mm thickness over plastered surface to prepare the surface even and smooth and applying one coat of primer and two coat of oil bond distemper complete all as specified and as directed. |
| 98 | M&L for old decorated plastered or unplastered surfaces of ceiling and applying one coat of oil emulsion distempler complete all as specified and as directed work upto 4th storied. |
| 99 | All as per item no 98 above on ceiling surfaces but for 5th to 8th storied complete all as specified and directed. |
| 100 | All as per item no 98 above on ceiling surfaces but for 9th to 12th storied complete all as specified and directed. |
| 101 | All as per item no 98 above on ceiling surfaces but for 13th storied complete all as specified and directed. |
| 102 | M&L for prepration of old painted wooden surfaces of any description not otherwise described over 10cm width or girth and applying one coat of synthetic enamel paint complete all as specified and as directed. |
| 103 | M&L for preparation of old painted steel surfaces of any description over 10cm width or girth not otherwise described and applying one coat of synthetic enamel paint complete all as specified and as directed. |
| 104 | M&L for preparation of new or previously untreated wooden surface of any description not otherwise described over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified and directed. |
| 105 | M & L for preparation of old plastered surfaces of walls and applying finishing walls with Acrylic Smooth exterior emulsion (weather coat) paint of required shade old work (one or more coat applied @ 1.67 ltr/10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/10 sqm complete all as specified and directed for work upto 4 th storied. |
| 106 | Dismantling boarding, any description, fixed in any position with nails complete all as specified and directed |
| 107 | M&L for veneered decorative plywood, grade 1, 12mm thick (with BWR resin) with decorative faces veneers on one faces, fixed with screws to timber frame work complete all as specified and directed |
| 108 | S&F Decorative auto soft close steel hinges for upto 25mm thick door/kitchen cabinet etc complete all as specified and as directed. |
| 109 | S&F Brass handles, cast type, polished bright 100mm long complete, including taking down old one complete all as specified and directed |
| 110 | Complete removal of existing treatment Washing, rubbing down and stopping of distempered and painted surfaces providing and applying 3 mm thick wall care putty on wall over plastered surface to prepare the surface even and smooth and applying one coat of primer and two coat of oil bond distemper complete all as specified and as directed. |
| 111 | M&L for one coat of french polishing on old work wood surfaces of any description, width or girth including cleaning and preparing the surface including a coat of wood filler complete all as specified and as directed. |
| 112 | M&L 20mm thick plastering in cement mortar on brick/concrete wall surfaces externally in CM (1:4) with water proofing admixture (Product like Conplast x421 c manufactured by Fosroc Chemicals (India) Ltd or Product like pidiproof LW manufactured by Pidilite industries Ltd or any other equivalent brand as approved by GE) @ 150 ml per 50 kg of cement or as per manufacturers instruction and finishing the surfaces even and smooth without using extra cement complete all as specified & directed (Note :- Admixture will be measured and paid seperately). |
| 113 | M&L rendering 5 mm thick in cement mortar (1:3) on concrete surfaces as in ceilings (sunshed, chajja etc) with Integral water proofing admixture (Product like Conplast x421 IC manufactured by Fosroc Chemicals (India) Ltd or Product likePidiproof LW manufactured by Pidilite industries Ltd or any other equivalent brand as approved by GE) @ 150 ml per 50 kg of cement or as per manufacturers instruction and finishing the surfaces even and smooth without using extra cement complete all as specified & directed for work upto 4 th storied. (Note :- Admixture will be measured and paid seperately). |
| 114 | Supply only Conplast x 421 C (Make: FORSOC or equivalent). |
| 115 | M & L finishing walls with Acrylic Smooth exterior emulsion paint of required shade new work (Two or more coat applied @ 1.67 ltr/10 sqm over and including priming coat of exterior weather coat primer applied @ 2.20 kg/10 sqm) complete all as specified and directed. |
| 116 | Material & Labour for applying one coat of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over new surfaces. all as specified and directed for work upto 4 th storied. |
| 117 | Aall as per item No 116 above 5th to 8th storied complete all as specified and directed. |
| 118 | Aall as per item No 116 above 9th to 12th storied complete all as specified and directed. |
| 119 | Aall as per item No 116 above 13th storied complete all as specified and directed. |
| 120 | Removing plants / herbs grown on walls / junctions with roots using herbicide chemical rendering and making good of existing brick / concrete surfaces complete all as specified and all as directed Please Enable Macros to View BoQ information |
