|
| 1 | Supply , Installation , Testing and Commissioning of Fire Fighting system at CHC Kutra in the District of Sundargarh for the year 2025.26 |
| 2 | Supply, installation, testing and commissioning of 5000 litre capacity triple-layer HDPE/Fiber reinforced water storage tank for terrace mounting, made from UV-stabilized, food-grade, extra-thick, unbreakable and flexible material, complete with threaded lid, inlet, outlet, overflow, washout arrangement, and all required fittings, accessories and connections, including fixing on prepared base, as required. Approved make: Intex / Ashirvad / Supreme or equivalent. |
| 3 | Supply, installation, testing and commissioning of C.I. wafer type butterfly valve conforming to BS 5155, slim seal design, lever operated type, suitable for mounting between flanges, complete with nuts, bolts, gaskets and all necessary accessories, as required. Nominal diameter: 100 mm. Approved make: Audco / Zoloto / Leader or equivalent. |
| 4 | Supply, installation, testing and commissioning of ISI marked isolation sluice valve, PN 1.6 rating, with C.I. body and bonnet, brass trim parts, non-rising spindle, complete with necessary companion flanges, nuts, bolts, gaskets, and position indicator for open and close operation, including all accessories and fixing as required. Nominal bore: 100 mm. Approved make: Kartar or equivalent. |
| 5 | Supply, installation, testing and commissioning of C.I. wafer type non-return valve (NRV), PN 16 rating, swing check type, suitable for mounting between flanges, complete with required flanges, nuts, bolts, gaskets and all necessary accessories, as required. Nominal bore: 100 mm. Approved make: Audco / Zoloto / Leader or equivalent. |
| 6 | Supply, installation, testing and commissioning of pressure gauges of suitable range 0–16 bar, having 100 mm dia dial, for pump sets, complete with all required accessories such as ball valves, siphon, unions, collars, reducers, and other necessary fittings for proper installation and operation, including fixing, alignment, testing, and commissioning as required at site. Make: H Guru / G Guru or approved equivalent. |
| 7 | Supply, installation, testing and commissioning of differential pressure switches of suitable range (0–12 bar) for pump sets, complete with all necessary accessories such as ball valves, unions, collars, reducers, and other required fittings, including proper fixing, connection, testing, calibration and commissioning at site as required. Make: Danfoss / Grundfos / Indfoss or approved equivalent. |
| 8 | Supply, fabrication, installation and erection of structural steel work such as beams, channels, angles, plates and sheets, made from structural steel sections of minimum size 100 mm × 50 mm channel with minimum 6 mm thickness, including 6 mm thick base plate for supporting 2 Nos. terrace water tank bases and barricading, complete with cutting, welding, drilling, bolting, surface preparation, primer painting, erection, alignment, and all necessary accessories and consumables as required for complete installation. Make: SAIL / Jindal / Tata or approved equivalent. |
| 9 | Supply, installation, testing and commissioning of 1 inch Air Release Valve, complete with all required accessories such as fittings, nipples, unions, valves, fasteners, sealing materials, and other allied works as required, including fixing, testing and commissioning as per site requirements and direction of Engineer-in-Charge. Make: Kartar or approved equivalent. |
| 10 | Supply, installation, testing and commissioning of 2-way Fire Brigade Connection, complete with all required accessories such as inlet connections, non-return valve, drain arrangement, caps with chains, mounting hardware, fittings, and allied components, including fixing, testing and commissioning as per site requirements and direction of Engineer-in-Charge. |
| 11 | Supplying, installation, testing and commissioning of ‘C’ Class Mild Steel (MS) pipes conforming to IS 1239, with welded / flanged connections, complete with heavy duty clamps, hangers, brackets, pipe supports, and all necessary fittings such as short pieces, tapering connection pieces, short and long bends, forged specials, sockets, elbows, reducers, plugs, tees, etc., complete to make the fire fighting system fully operative as required and approved by LFA / TAC authorities. The pipes shall be laid and fixed on walls, ceilings, inside brick walls or RCC structures using approved anchor fasteners, including cutting, threading, welding, alignment, fixing and testing to the satisfaction of the Consultant / Client. The exposed over-ground / overhead pipelines shall be painted with one coat of approved primer and two coats of enamel paint of approved shade (Post Office Red) complete as required. Make: TATA / SAIL / Jindal or approved equivalent. 100mm Nominal Bore |
| 12 | 80 mm Nominal Bore |
| 13 | 25 mm Nominal Bore |
| 14 | Supplying, installing, testing and commissioning of single headed hydrant valve conforming to IS 5290, made of stainless steel, having 63 mm dia instantaneous outlet and 80 mm dia flanged inlet, complete with blank cap, chain, hand wheel and all associated accessories, including fixing, connection, testing and commissioning, complete as required for proper operation of the fire fighting system. Make: Newage / Minimax / Fireshield / Kartar or approved equivalent. |
| 15 | Supply, installation, testing and commissioning of stainless steel short branch pipe with nozzle conforming to IS 903, complete with all necessary fittings and accessories for proper operation, fixing, testing and commissioning as required at site; Make: Newage / Minimax / Fireshield / Kartar or approved equivalent. |
| 16 | Providing, fixing, testing and commissioning of 63 mm dia, 15 meter long RRL hose pipe conforming to IS 636 Type A, TAC / LFA approved, of standard length, approved pattern and size, complete with stainless steel male and female couplings duly bound with copper wire and all necessary accessories, complete as required for proper operation of the fire fighting system; Make: CRC or approved equivalent. |
| 17 | Supply, installation and fixing of MS hose box of size 750 mm × 600 mm × 300 mm, fabricated from 1.6 mm thick MS sheet, with double door arrangement, front door provided with full glass and locking arrangement, suitable to accommodate two nos. 63 mm dia RRL hose pipes and one no. branch pipe, complete with powder coating and postal red finish, including all necessary fittings and accessories as required for proper installation; Make: Winco or approved equivalent. |
| 18 | Supply, installation, testing and commissioning of NRV (Dual Plate Check Type) conforming to API 594/598, having CI body with trim parts, PN 1.6 rating, complete with necessary companion flanges, carbon steel hardware, gaskets, arrow marking indicating direction of flow and all required accessories, fully installed, tested and commissioned as required; valve shall be ISI marked and approved; Make: Kartar or approved equivalent. 100mm Nominal Bore |
| 19 | Supply, installation, testing and commissioning of first aid hose reel drum of 180° swinging type, complete with 19 mm dia rubber braided hose of 30 m length, ball valve and 6 mm dia shut-off nozzle, including all accessories required for proper fixing and operation, conforming to IS 884, complete as required at site; Make: Newage / Minimax / Fireshield / Mitras or approved equivalent. |
| 20 | Supply, installation, testing and commissioning of gun metal, chrome finished ball valves with fittings, screwed end type, of nominal bore size as specified, complete with all accessories required for proper installation, testing and commissioning as per site requirement; Make: Audco / Zoloto / Leader / Kartar or approved equivalent. 25 mm Nominal Bore |
| 21 | 15 mm Nominal Bore |
| 22 | Supply, installation, testing and commissioning of electrically operated terrace booster pump set, motor driven, capable of delivering 450 LPM at 36 m head, complete with 7.5 HP, 3-phase electric motor, base frame, coupling, alignment, necessary fittings, testing and commissioning for proper operation as required at site; Make: Kirloskar or approved equivalent. |
| 23 | Supply, installation, testing and commissioning of 32 mm SDR-11 UPVC pipe for filling line from existing tank to fire water tank at terrace level, including tees, elbows, ball valve, tank connector, couplers, end caps and all required fittings and accessories, complete with proper clamping and fixing on wall surface, jointing, testing and commissioning for satisfactory operation; total pipe length approximately 60 meters; Make: Supreme / Astral / Finolex / Sudhakar or approved equivalent. |
| 24 | Supply, installation, testing and commissioning of MCC cum starter control panel (7.5 HP) for terrace pump sets, complete with incomer, selector switch for standby and working pump operation, auto/manual operation facility, necessary annunciation, internal wiring, protections and all associated accessories, fully installed, tested and commissioned as per site requirements and direction of Engineer-in-Charge; Make: Powertech or approved equivalent. |
| 25 | Supply, installation, testing and commissioning of power cable 4C × 10 sqmm, including laying, clamping on wall surface, termination, glands, lugs and all necessary accessories, complete for motor connection from pump control panel to pump set, fully installed, tested and commissioned as per direction of Engineer-in-Charge; Make: Polycab / Havells / KEI / RR / Finolex or approved equivalent. |
| 26 | Supply, installation, testing and commissioning of control cable 3C × 1.5 sqmm, including laying, clamping on wall surface, termination and all necessary accessories, complete for establishing automation and control connections of pump system panel, fully installed, tested and commissioned as per direction of Engineer-in-Charge; Make: Polycab / Havells / KEI / RR / Finolex or approved equivalent. |
| 27 | Providing and fixing of 4.5 kg capacity CO₂ type fire extinguisher, ISI marked and conforming to IS 15683, complete with high pressure discharge hose of 1 m length, discharge horn, refill gas, carrying handle, wall mounting bracket and all necessary accessories, fully installed and ready for use as required; Make: Safex / Fireshield / Ceasefire or approved equivalent. |
| 28 | Providing, fixing, testing and commissioning of 6 kg ABC (Powder Type) fire extinguisher in high pressure mild steel cylinder, ISI marked and conforming to IS 15683, fitted with pressure indicating gauge, internal discharge tube, squeeze lever type valve, fully charged with ABC powder (Mono Ammonium Phosphate) pressurized with nitrogen, complete with wall suspension bracket and all required accessories, fully installed and ready for use; Make: Safex / Fireshield / Ceasefire or approved equivalent. |
| 29 | Supply and installation of fire buckets (3 Nos.) with stand, complete with mounting arrangement, painting in fire red colour and all necessary fittings and accessories as required for proper installation and use at site. |
| 30 | Supply, fabrication and installation of pump protection shed at terrace level, made of structural steel framework and sheet covering, complete with cutting, welding, fixing, anchoring, painting and all necessary fittings and accessories, fully installed as required to provide proper protection to pump equipment. |
| 31 | Supply, installation, testing and commissioning of Main Fire Alarm Control Panel (FACP), conventional type fire detection and alarm system, having minimum 4-zone capacity, complete with all necessary accessories, internal wiring, indications, controls, testing and commissioning for proper operation as required at site; Make: Honeywell / Notifier / Siemens / Ravel or approved equivalent. |
| 32 | Supply, installation, testing and commissioning of conventional type photoelectric smoke detector, complete with base, mounting accessories and all necessary fittings, fully installed, tested and commissioned as per instructions of Engineer-in-Charge; Make: Honeywell / Notifier / Siemens / Ravel or approved equivalent. |
| 33 | Supply, installation, testing and commissioning of conventional type manual call point, complete with all necessary accessories, mounting arrangement, wiring connections, testing and commissioning as per instructions of Engineer-in-Charge; Make: Honeywell / Notifier / Siemens / Ravel or approved equivalent. |
| 34 | Supply, installation, testing and commissioning of conventional type hooter cum strobe, having sound output of 80 dBA at 3 m for audible annunciation and visual indication with 70 cd flashing at 1 Hz, complete with all necessary accessories, mounting, wiring connections, testing and commissioning as per instructions of Engineer-in-Charge; Make: Honeywell / Notifier / Siemens / Ravel or approved equivalent. |
| 35 | Supply, installation, testing and commissioning of 2C × 1.5 sqmm armoured, single strand, outer sheathed, FRLS, PVC insulated copper conductor cable, conforming to relevant IS standards, complete with laying, fixing, termination, glands, lugs and all necessary accessories, fully installed, tested and commissioned as required at site; Make: Finolex / Polycab / Havells / RR Kabel / KEI / Gloster or approved equivalent. |
| 36 | Supply and installation of “Way to Exit” signage at each staircase on every floor, indicating direction of fire exit, with lettering size 7.5 cm in contrasting colour from background, overall signage size 15 cm × 60 cm, complete with fixing arrangements and all necessary accessories as required for proper installation. |
| 37 | Supply and installation of “FIRE ORDER” signage, manufactured on 3 mm thick opaque PVC foam board, computer cut, with non-reflective self-adhesive PVC vinyl finish, size 3 ft × 4 ft, conforming to BIS specifications, printed with approved fire safety instructions including evacuation procedure, use of nearest fire extinguishing equipment or wet riser, maintaining calm during evacuation, and guidance for attracting rescue attention in case of difficulty, complete with fixing arrangements and all necessary accessories as required. |
| 38 | Fire hose reel (Size:6\\" X 4\\") |
| 39 | Fire extinguishers (Size:6\\" X 4\\") |
| 40 | Manual Call Point (Size:6\\" X 4\\") |
| 41 | Supply and installation of 20 gm portable aerosol based automatic fire extinguisher with coverage up to 0.2 m³, conforming to EN 15276-1:2019, EN 15276-2:2019 and ISO 15779:2011, suitable for extinguishing Class A, B, C & E fires, non-corrosive, non-conductive and non-toxic type, with activation temperature range 70°C to 180°C, complete with all required accessories, mounting and installation as per direction of Engineer-in-Charge; product shall have minimum 3 years replacement warranty and 10 years shell life; Make: Pyrogen / Genefire / Stat-X or approved equivalent. |
| 42 | Supply and installation of linear heat detection cable compatible with aerosol based fire extinguisher system, complete with all necessary accessories, fixing and connections, fully installed as per site requirements and direction of Engineer-in-Charge; Make: Pyrogen / Genefire / Stat-X or approved equivalent. Please Enable Macros to View BoQ information |
