|
| 1 | CIVIL WORKR.C.C. work of M20 in following works using 12 mm. to 20 mm. (½” to ¾”) size (20 mm. not to exceed 25%) hard black crusher broken granite stone chips of approved quality from approved quarry including hoisting, lowering, laying and compacting concrete, watering curing, centering, shuttering and finishing the exposed surfaces smooth with cost, conveyance, royalties, taxes of all materials with all labour and T & P required for the work etc. complete in all respect but excluding the cost and conveyance of M.S. rods or Tor steel and binding wire of 18 to 20 gauge and labour charges for straightening, cutting, bending, binding and tying the grills and placing in proper position complete in all respect as per specification and direction of the Engineer-in-charge.2nd floorColumn in Super Structure |
| 2 | Lintel |
| 3 | Roof Beam |
| 4 | Roof Slab |
| 5 | Stair Case |
| 6 | RCC Chhaja |
| 7 | Terrace FloorColumn in Super Structure |
| 8 | Lintel |
| 9 | Roof Beam |
| 10 | Mumty Room Slab |
| 11 | RCC Chhaja |
| 12 | COMPOUND WALLColumn Base |
| 13 | Plinth Beam |
| 14 | Column & Beam |
| 15 | Earth in excavation of foundation and trenches in hard soil within 50m lead and 1.5 m lift including rough dressing and breaking colds to maximum 5 cm to 7 cm and laying in layers not exceeding 0.3 m in depth and as per specification complete.Compound Wall |
| 16 | Supplying, filling foundation & plinth with sand including watering, ramming, cost, conveyance, royalty, taxes of all materials and labour (T&P) etc. complete.Compound Wall |
| 17 | C.C. (1:4:8) using 4cm size b.h.g.c.b. metal including watering, curing with cost, conveyance, royalty and taxes of all materials and labour etc. complete.Compound Wall |
| 18 | Fly Ash Brick Masonry in C. M. (1:6) in superstructure including watering, curing with cost, conveyance, royalty and taxes of all materials and labour etc. complete.2nd Floor |
| 19 | Terrace Floor |
| 20 | Compound Wall |
| 21 | Fly Ash Brick Masonry in C. M. (1:6) in superstructure including watering, curing with cost, conveyance, royalty and taxes of all materials and labour etc. complete.2nd Floor |
| 22 | Fly Ash Brick Masonry in C. M. (1:6) in Foundation & Plinth including watering, curing with cost, conveyance, royalty and taxes of all materials and labour etc. complete.Compound Wall |
| 23 | 16mm thick C.P. (1:6) over brick surface of inside walls finished smooth including watering, curing with cost, conveyance, royalty and taxes of all materials and labour etc. complete.2nd Floor |
| 24 | Terrace Floor |
| 25 | Compound Wall |
| 26 | 12mm thick C.P. (1:6) to out side bricks wall surface finished smooth including watering, curing with cost, conveyance, royalty and taxes of all materials and labour etc. complete.2nd Floor |
| 27 | Terrace Floor |
| 28 | Compound Wall |
| 29 | Providing 6 mm thick cement plaster on ceiling with cement mortar of mix (1:6) with screened and washed sharp sand for mortar and finished smooth to the rough surface of walls in all heights after racking out joints including watering and curing, rounding of corners, providing grooves where ever necessary with cost, conveyance, royalties and taxes of all materials with cost of all labour, T&P, and scaffolding required for the work etc. complete in all respect as per specification and direction of the Engineer-in-charge.2nd Floor |
| 30 | Terrace Floor |
| 31 | Supplying, fitting and placing uncoated HYSD bar reinforcement complete as per drawing and technical specification.2nd Floor |
| 32 | Terrace Floor |
| 33 | Compound Wall |
| 34 | Supplying, fitting and fixing of tiles (60cm x 60cm colour/printed premium grade) in floors, treads or steps landing on 20mm thick bed of CM (1:4) jointed with neat cement slurry mixed with pigments including watering and curing, rounding of corners, providing grooves where ever necessary with cost, conveyance, royalties and taxes of all materials with cost of all labour, T&P, and scaffolding required for the work etc. complete in all respect as per specification and direction of the Engineer-in-charge.2nd Floor |
| 35 | Providing fitting and fixing of false ceiling with alluminium anodisized T section including cost, conveyance, royalties and taxes of all materials with cost of all labour, T&P, and scaffolding required for the work etc. complete in all respect as per specification and direction of the Engineer-in-charge.2nd Floor |
| 36 | Providing, fitting, fixing of dressed seasoned sal wood work framed and fixed (wrought and put up) in frames of doors, windows & ventilabours door frame of Sal/Piasal Windows & Ventilators including all cost of labour, T&P , hire charges of drilling machine, labour charges etc. complete in all respect as per specification and direction of the Engineer-in-charge.2nd Floor |
| 37 | Terrace Floor |
| 38 | Providing, fitting, fixing of dressed seasoned 32mm piasal wood or local Teak wood panelled shutters moulded panels with all labour, iron fittings, and wooden hinged cleats etc fitted and fixed brass fittings (heavy type) complete in all respect with cost of all materials taxes, labour T&P etc complete in all respect as per direction of Engineer-incharge.2nd Floor |
| 39 | Terrace Floor |
| 40 | Supplying, fitting, fixing up window (sliding type) made up aluminum Section 151-154, 151-155, as windows frame section No. 151- 155, 151-153 and 151-167 as shutter frame with 5mm thick plain glass as panel fitted with rubber beading including locking arrangement including all fitting including cost of materials all taxes labour, T&P etc. complete as per direction of Engineer-incharge. Shutter Frame 2nd Floor |
| 41 | 5mm thick Glass |
| 42 | Supplying, fitting, fixing in all floor W. I. grills, grill gates, M. S. gates with top and bottom rails, steel window, crital frames for windows stair case and parapet railing as per approved drawing and design including making holes in walls and R.C.C. structure, wood works etc. and making good the damages to walls with (1:2:4) with black hard crusher broken granite chips of 12mm size complete in all respect as per direction of the Engineer – in – Charge.2nd Floor |
| 43 | Supplying, fitting and fixing of Stainless steel of 304 grade in hand railing using 50mm dia of 2mm thick circular pipe with Balustrade of size 32mm x 32mm x 2mm @ 0.90mtr. C/C and stainless square pipe bracing of size 32mm x 32mm x 2mm in 3 rows in stair case as per approved design and specification, buffing, polishing etc with cost, conveyance, taxes of all materials, labour, T&P etc. required for the complete in all respect.2nd Floor |
| 44 | Painting two coats with enamel paints of approved shade in all floors to iron /wood work including sand papering, polishing the surface, including cost, conveyance, royalties and all taxes of all materials along with T & P required for the work including cost of paints etc. complete in all respect.2nd Floor |
| 45 | Terrace Floor |
| 46 | Compound Wall |
| 47 | Finishing wall surface of walls with white wall putty (Water based) of approved make and finished smooth and even surface to receive painting including cost of scaffolding staging charges with cost of all materials taxes, labour T&P etc complete.2nd Floor |
| 48 | Terrace Floor |
| 49 | Painting one coat of wall primer including cost of paint and cost of all materials taxes, labour T&P etc complete.2nd Floor |
| 50 | Terrace Floor |
| 51 | Wall Painting two coats with approved Plastic Emulsion Paint walls etc. complete as directed by the Engineer – in – Charge using distemper including cost, conveyance of all materials including cost of distemper with all taxes and cost of all labour with T & P required for the work etc. complete in all respect.2nd Floor |
| 52 | Terrace Floor |
| 53 | Painting 2 coats with Weather coat of approved shade by means of brush to outside surface of walls after cleaning the surface including cost of material with all taxes and cost of all labour with T&P required for the work etc. complete in all respect.2nd Floor |
| 54 | Terrace Floor |
| 55 | Dismantling and removing R.C.C. columns, beams, slab, staircase, landing and lintels including stacking the useful materials for reuse and removing the debris within 50m lead, within initial lead & lift with all labour, T&P etc.complete.2nd Floor |
| 56 | Dismantling and removing R.C.C. chajja, shelves, fins, and parapet including stacking the useful materials for reuse and removing the debris within 50m lead, within initial lead & lift with all labour, T&P etc.complete.2nd Floor |
| 57 | Dismantling and removing doors, windows and ventilators including removal of frame, hinges, fastening and stacking the same for reuse and removing the debris within 50m lead, within initial lead & lift with all labour, T&P etc.complete.2nd Floor |
| 58 | Providing of M.S. Door / Window / Grill gates made out of M.S. Angle, flat, sheet etc. including cost, conveyance, taxes of all materials and labour (T&P) etc. complete.Compound Wall |
| 59 | Labour for fitting, fixing of M.S. Door / Window / Grill gates with C.C. (1:2:4) including cost of all labour (T&P) etc. complete.Compound Wall |
| 60 | Priming one coat over wall surface with cement primer including cost of all materials and labour (T&P) etc. complete.Compound Wall |
| 61 | Finishing wall surface with Weather Coat (I.S.I) two coats of approved shade including cost of all materials and labour (T&P) etc. complete.Compound Wall |
| 62 | EI WORKRecessed modular wiring to Light/ Fan/ Call bell and Exhaust fan points with 1.5 mm2 FRLSH PVC insulated single core multistrand copper conductor of ISI marked with 20mm dia non-metalic PVC flexible conduit with 5/6Amp 250volt Modular type switch,ceilling rose mounted on MS box having front bakelite cover of suitable size M.S box with 1.5mm2 FRLSH pvc insulated Single Core multistrand copper conductor as earth wire Including all accessories and connection as per direction of Engineer-in-charge. (Make of wire:- Finolex/Polycab/ Havells/ V.Guard) & (Make of Switch:-Legrand/Havells/ Schnider/Hager).Group-A |
| 63 | Group-B |
| 64 | Group-C |
| 65 | Recessed wiring to 5/6A modular socket outlet with 2x1.5mm2 PVC Insulated S.C FRLSH multistrand Cu.wire ISI marked in 20mm non-metalic PVC flexible conduit pipe with modular type switch. (Make of wire -Finolex//Havells /Polycab/V.Guard) (Make of Switches & Sockets:-Legrand/ Havells/ Schnider/Hager)Group-A |
| 66 | On existing board |
| 67 | Recessed wiring to modular type power plug point with 16Amp Switch and Socket along with 2x4mm2 PVC Insulated S.C FRLSH multistrand Cu.wire ISI marked in 20mm dia non-metallic PVC flexible conduit along with 1x1.5mm2 FRLSH PVC insulated S.C C.U. wire for loop earthing as required.(Make of wire:-Finolex/Havells/Polycab/V.Guard) & Make of Switches & Sockets:-Legrand/Havells/Schnider/Hager) |
| 68 | Wiring to Circuit/ Sub-main along with earth wire with following size of FRLSH PVC S.C.Cu. Wire (Make of wire:- Finolex/Havells/ V.Guard/Polycab) 1 x 1.5mm2 Submain wiring for Invertor wiring |
| 69 | 2X1.5mm2 + 1x1.5mm2 |
| 70 | 2X2.5mm2 + 1x1.5mm2 |
| 71 | 2X4mm2 + 1x1.5mm2 |
| 72 | 2X6mm2 + 1x2.5mm2 |
| 73 | 2x10mm2 + 1x4mm2 |
| 74 | S/F of Step type modular regulator of Havells/ Legrand/Schnider make. |
| 75 | S/F of 1200mm Ac Ceilling Fan of model Usha Allure plus (Ivory/White colour)/ Bajaj Regal goldNXG (Ivory/white)/Havells festiva/Crompton Diago/equivalent make of mentioned brand without Regulator as per direction of Engineer in- charge. |
| 76 | S/F of 18watt LED Tube Light fitting of Philips/Bajaj/Havells make. |
| 77 | S/F of 18watt LED Ceiling down light fitting complete of Havells/Bajaj/Philips make. |
| 78 | S/F of 18watt LED Surface light fitting complete of Havells/Bajaj/Philips make. |
| 79 | S/F of Computer board consisting of 3 Nos 6Amp modular Switch with sockets of Havells/Legrand/Schnider make including all accessories,cutting of wall,recessed wiring and connections as per requirement. |
| 80 | S/F of Modular type Angle Holder of any ISI make. |
| 81 | S/F of 9watt LED Bulb of Havells/HPL/Bajaj make. |
| 82 | S/F of 300mm Exhaust Fan of model Usha turbojet/Bajaj freshee/Havells/V-Guard make. |
| 83 | S/F of 8-way double door MCB distribution Box with Incoming-1x32Amp DP MCB of C'Series+ 6x(6-16)Amp SP MCB of B' Series as per direction of Engineer-in-charge.(All DB& MCB of make-Schnider/Hager/Legrand/L&T) |
| 84 | S/F of 8-way double door MCB distribution Box with Incoming-1x63Amp DP MCB of C'Series+ 2x32Amp DP MCB of B'Series as per direction of Engineer-in-charge.(All DB& MCB of make-Schnider/Hager/Legrand/L&T) |
| 85 | S/F of 8-way double door MCB distribution Box with Incoming-1x63Amp DP MCB of C'Series+ 6x10Amp SP MCB of B'Series as per direction of Engineer-in-charge.(All DB& MCB of make-Schnider/Hager/Legrand/L&T) |
| 86 | S/F of 3.5Corex50mm2 PVC Alluminium Armoured Cable of ISI marked (Polycab/KEI/Havells make) |
| 87 | S/F of 100Amp TPN Copper Busbar of Havells/HPL/L&T make. |
| 88 | S/F of 100Amp TPN Main Switch of Havells/HPL/L&T make. |
| 89 | S/F of Special Earthing complete with provision of 600x600x3.15mm thick copper plate along with25x5mm copper strip in 40mm dia GI pipe including soldering of strip if necessary and providing masonary enclosure with cover plate having locking arrangement and watering pipe etc.with charcoal and salt as required. |
| 90 | S/F of Earth Bus of 50mmx5mm Copper Strip of ISI marked on surface for connection of earth wires as required. |
| 91 | S/F of extra long No.8 G.I.Wire for running of earth from Earth Bus to all panel boards and distribution boxes for earth continuity. |
| 92 | S/F of Copper 5-Star Rated 1.5Ton Split type Adjustable Invertor A.C Machine, make of Carrier/Voltas/LG/Bluestar/any ISI equivalent make. |
| 93 | Installation Charges of 1.5 Ton Split type A.C.Machine. |
| 94 | S/F of 4KVA Voltage Stabilizer having digital display,initial time delay system i.e.certified with ISO 9001:2008 with working range of Input Voltage (90-300)Volts of Autotake/V-Guard make. |
| 95 | S/F of extra long Copper pipe from Indoor to Outdoor unit. |
| 96 | S/F of M.S.Stand for fixing of Outdoor Unit of 1.5Ton Split type A.C.Machine. |
| 97 | S/F of 2350VA UPS (Invertor) of Microtek/ Luminous make. |
| 98 | S/F of 12Volts 200Ah Sinewave battery for Invertor of Exide/Luminous/Microtek make. |
| 99 | S/F of Trolley/Rag for Invertor & Battery set. |
| 100 | Providing and Fixing ISI marked ABC stored pressure type Fire extinguisher of 6 Kgs. Capacity confirming to IS: 15683 with discharge hose, nozzle, Mono Amonium Phosphate base & ABC powder pressurised with nitrogen gas carrying handle and wall mounting bracket etc as required. |
| 101 | Providing and Fixing of 4.5 Kgs. Capacity CO2 gas type ISI marked fire extinguisher (IS: 15683) fitted with high pressure 1 mtr. Long discharge hose & horn complete with refill gas, carrying handle and wall mounting bracket etc as required. |
| 102 | Provision of Lightening arrestor with 85mm dia 3mm thick Copper base plate and Copper flat 20mm width x 3mm thick including all accessories. |
| 103 | Supply & laying of 20mmx3mm Copper Strip of ISI marked for Lightening Arrestor. |
| 104 | PH WORKProviding and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes conforming to IS:15778, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer-in-Charge 20mm dia C-PVC pipe second floor |
| 105 | 25mm dia PVC pipesecond floor |
| 106 | 32mm dia C-PVC pipe |
| 107 | 40mm dia C-PVC pipe |
| 108 | Supplying all materials, labour T&P and fitting and fixing brass/CP fittings of the following nominal bore with supply of all joiniting materials including cost & conveyance of all materials to worksite, payment of taxes etc. all complete as per P.H specification and direction of the Engineer-in-charge.15mm dia CP angle stop cock (Jaquar)CON-CHR-059KN |
| 109 | 15mm dia CP two way bib cock (Jaquar)CON-041KN |
| 110 | 15mm dia CP short body bib cock (Jaquar)CON-CHR-047KN |
| 111 | 15mm dia CP long body bib cock (Jaquar Make)CON-107KN |
| 112 | 20mm dia CP consealed stop cock(Con-CHR-083KN Jaquar make) |
| 113 | 25mm dia brass full way valve (Shakti make) |
| 114 | 32mm dia brass full way valve (Shakti make) |
| 115 | 25mm dia CP Health Faucet (Jaquar Make)ALD - CHR - 565 |
| 116 | 15mm CP Extension piece |
| 117 | 125mm CP grating |
| 118 | 15mm size C.P. flange |
| 119 | Supplying all materials , labour, T&P and fixing rotational moulded polyethylene cylindrical vertical water storage tanks conforming to IS:12701/1996 including cutting holes through the tank and fixing mild steel tubes and fittings and providing extra sockets and jam nuts, fixing ball valve etc. including hoisting upto a height of 5 metres above ground level and placing the tank to the required position and providing 5.40 mtr. lengthx0.25 mtr width KB brickwork in cement mortar (1:6) of 0.46m height in staging and 0.13mtr thick circular protection wall of 0.46mtr height to support the tank,12mm thick cement plaster in cement mortar (1:6) over brick work, RCC slab of size 1.60mX1.60m and 0.10m thick ,RCC beam of 0.25mx0.30m and 3.40m average length in cement concrete (1:2:4) using 12mm size crusher broken hard black granite chips and required steel reinforcement including centering and shuttering,watering,curing ,cost of all materials,conveyance of all materials to worksite , payment of royalty, all taxes etc.all complete as per approved drawing , P.H. specification and direction of Engineer-in-charge 2000 liters capacity PVC water storage tank |
| 120 | supplying all materials, labour, T&P and cutting holes through existing brick work including making good the damages in cement mortar (1:4) for taking G.I. Pipes and fittings/ P.V.C. pipes and fittings including watering, curing, cost & conveyance of all materials to worksite, payment of royality, taxes etc. all complete as per direction of Engineer-in-charge.second floor |
| 121 | Supplying all materials , labour, T&P and cutting holes in RCC floors and roofs upto 19cm thick for passing P.V.C pipes and G.I fittings etc. , and repairing the holes after insertion of pipe etc. with cement concrete (1:2:4) including finishing complete so as to make it leak-proof as per P.H. specification and direction of Engineer-in-chargesecond floor |
| 122 | Supplying all materials, labour, T&P and cutting grooves in pucca floors and walls for taking G.I./P.V.C. pipes and making good the damages including watering , curing , cost & conveyance of all materials to worksite, payment of royality, taxes etc all complete as per direction of the Engineer-in-charge.second floor |
| 123 | Supplying all materials, labour, T&P and fitting and fixing U-PVC SWR soil waste ventilating pipes and fittings of the following outside diameter conforming to ISI No 13592/1992 to walls with nails, bobbins and wooden plugs or laying in trenches including jointing with supply of approved rubber lubricant by non-heat application method/as per manufacturer's specification, testing, earthwork in excavation in all kinds of soil and refilling of trenches , cost & conveyance of all materials to worksite, payment of taxes etc. all complete as per P.H specification and direction of the Engineer-in-charge. 110mm U-PVC SWR Pipe (Ori Plast/Finolex/Supreme Make Type-B) |
| 124 | 110mm U-PVC ‘P’ Trap(Ori Plast/Finolex/Supreme Make) |
| 125 | 110mm U-PVC door bend(Ori Plast/Finolex/Supreme Make) |
| 126 | 110mm U-PVC Plain bend(Ori Plast/Finolex/Supreme Make) |
| 127 | 20mm dia CP consealed stop cock(Con-CHR-083KN Jaquar make) |
| 128 | 110mm U-PVC offset without ear(Ori Plast/Finolex/Supreme Make) |
| 129 | 110mm U-PVC Cowl(Ori Plast/Finolex/Supreme Make) |
| 130 | 110mm U-PVC S/Jn door(Ori Plast/Finolex/Supreme Make) |
| 131 | 110mm U-PVC Plain tee(Ori Plast/Finolex/Supreme Make) |
| 132 | 110mm U-PVC Socket(Ori Plast/Finolex/Supreme Make) |
| 133 | Supplying all materials, labour T&P and and fixing 12.50 liters/10 liters capacity low level flushing cistern with a pair of cast iron or M.S. brackets complete with fittings such as siphonic arrangements 15mm nominal size brass/pvc ball valve with polythene float CP brass handle,unions and couplings for connection with inlet, outlet and overflow pipes, 32mm dia CP long flush bend, 15mm dia pvc inlet connection pipe including cutting holes and making good the same and connecting the flush bend with cistern and closet and connceting the inlet pipe with suupply main , cost & conveyance of all materials to worksite, payment of taxes etc. all complete as per P.H specification and direction of the Engineer-in-charge10 ltr. Capacity pvc L.L. cistern with 32mm. Dia CP long flush bend ( Slimline-white-Parryware make ) |
| 134 | Supplying all materials, labour, T&P and fixing the following vitreous china Wash Down Water Closet(European type W.C. pan)with integral 'p' or 's' trap to the floor with wooden plug and chromium plated pedestal screws including jointing the trap with soil pipe in cement mortar (1:1) fixing plastic seat and cover for wash down water closet with chromium plated brass hinges and rubber buffers including polishing , cost & conveyance of all materials to worksite, payment of royality, taxes etc. all complete as per P.H specification and direction of the Engineer-in-chargeEuropean water closet with 'p' trap plain(Hindware/Parryware/Neycer make) |
| 135 | Supplying all materials, labour T&P and fixing wash basins with hole for pillar taps with cast iron or M.S.brackets painted white including cutting holes in walls and making good the damages with supply of wooden plugs, screws and cement etc, fixing pedestal for wash basin recessed at the back for the reception of pipes and fittings, fixing PVC waste pipe of 32mm nominal diameter for wash basin including brass check nut complete, fixing pillar taps capstan head screw down high pressure lettered 'Hot' and 'Cold' with long screws, shanks and back nuts of 15mm dia nominal bore, fixing 15mm dia PVC inlet connection pipe and making connection with pillar cocks and supply mains for wash basin, fixing 32mm dia CP brass waste, cost & conveyance of all materials to worksite, payment of taxes etc. all complete as perP.H specification and direction of the Engineer-in-chargeHalfpedestal basin(560x450)Hindware No.91049+91115 |
| 136 | Supplying all materials, labour, T&P and fixing standard sized CP towel rail complete with CP brass brackets fixed to wooden plugs with CP screws as per specification and direction of the Engineer in charge25mmx600mm long CP towel rail |
| 137 | Towel ring |
| 138 | Supplying all materials, labour, T&P and fixing standard sized glass-shelf with CP brass brackets and guard rail complete fixed to wooden plugs with CP screws as per specification and direction of Engineer in charge.600mmx125mm plate glass shelf |
| 139 | Supplying all materials, labour, T&P and fixing mirror of superior glass mounted on 6mm.thick A.C. sheet or ply wood sheet and fixed to wooden plugs with CP screws and washers complete as per specification and direction of Engineer in charge.600mmx450mm size B.E mirror |
| 140 | Supplying all materials, labour, T&P and fixing CP soap holder complete with CP brass brackets fixed to wooden plugs with CP screws as per specification and direction of the Engineer in chargeCP soap holder |
| 141 | Supplying all materials labor T&P & Fitting & fixing CP shower with rim with supply of red lead and yarn nail complete as per direction of Engineer in charge.½” x 5” CP Shower |
| 142 | Supplying all materials , labour, T&P and cutting holes through existing brick or laterite masonry wall for taking U-PVC pipes and fittings including making good the damages etc. all complete as per P.H. specification and direction of Engineer-in-charge |
| 143 | Supplying all materials , labour, T&P and cutting of RCC chajja for taking HCI or U-PVC pipe and fittings including making good the damages etc. all complete as per P.H. specification and direction of Engineer-in-charge |
| 144 | Supplying all materials ,labour ,T&P and constructing Inspection Chamber of inside size 760mmx760mmx460mm with cement concrete (1:3:6) using 40mm size crusher broken hard black granite metal on bed , KB brick work in cement mortar (1:6) in foundation and plinth, moulding and shaping the channel inside and benching with cement concrete (1:2:4) using 12mm size crusher broken hard black granite chips, 12mm thick cement plaster (1:3) with cement punning to inside, cement flush pointing (1:3) to outside, R.C.C cover slab (1:2:4) using 12mm size crusher broken hard black granite chips with R.C.C man hole cover, earth work in excavation in all kinds of soil and refilling the cavity around the chamber including watering,curing,cost of all materials, conveyance of all materials to worksite, payment of royalty,all taxes etc.all complete as per approved drawing, P.H specification and direction of Engineer-in-chargeInside size 76cmx76cmx46cm with 18” dia RCC MH cover |
| 145 | Supplying all materials ,labour ,T&P and constructing gully trap chamber of inside size 250mmx250mm with 8cm thick RCC precast cover slab in cement concrete (1:2:4) mix using 12mm size crusher broken HG chips, foundation concrete (1:4:8) using 40mm size crusher broken HG metal on bed and around trap, KB brick work in cement mortar (1:6) in foundation and plinth and inside 12mm thick cement plastering (1:3) finished with a floating coat of neat cement including fixing 100mmx100mm size HCI gully trap, 150mmX150mm size CI grating etc.all complete as per drawing, specification and direction of Engineer-in-charge |
| 146 | Supplying all materials, labour, T&P and providing cement concrete ( 1:2:4 ) with 12mm size crusher broken hard black granite chips including watering, curing,cost of all materials, conveyance of all materials to work site with payment of royalty, all taxes etc all complete as per P.W.D specification and direction of Engineer-in-chargesecond floor |
| 147 | Supplying all materials, labour, T&P and providing and fixing vitrified tiles in floors, treads or steps and landing on 25mm thick bed of cement mortar (1:1) ( 1 cement : 1 sand ) jointed with neat cement slurry mixed with pigment to match the shades of the tiles including watering, curing,cost of all materials, conveyance of all materials to work site , payment of royalty, all taxes etc all complete as per P.W.D specification and direction of Engineer-in-charge ( ceramic floor tiles of premium grade having thickness 7mm to 8mm conforming to IS 13755 of size 40cmx40cm special printed series to be pre-approved by the Engineer-in-charge )Kajaria/Somany/Johnson tile 60cmx60cm second floor |
| 148 | Supplying all materials,labour,T&P and providing 12mm thick cement plaster(1:4) on brick work including watering,curing,cost of all materials, conveyance of all materials to worksite,payment of royalty,all taxes etc.all complete as per PWD specification and direction of the Engineer-in-charge.second floor |
| 149 | Supplying all materials, labour, T&P and providing and fixing porcelain glazed tiles in dado skirting on 12mm thick cement plaster (1:3) jointed with neat cement slurry mixed with pigment to match the shades of the tiles including watering, curing,cost of all materials, conveyance of all materials to work site , payment of royalty, all taxes etc all complete as per P.W.D specification and direction of Engineer-in-charge( ceramic wall tiles of premium grade having thickness 6.5mm to 6.7mm conforming to IS 13753 of size 25cmx33cm special plain / printed series to be pre-approved by the Engineer-in-charge )Kajaria/Somany/Johnson tile 60cmx30cm second floor |
| 150 | Providing fitting, fixing of Aluminium door with anodized AL. door section of 9202 as vertical member,9201 as top and 9200 as middle bottom member with frame section No. 9221 and tapered clip no. 4660 and the frame to be completed by means of jointing angle No. 1855 Including all Cost of Labour. T&P hire charges of drilling machine. labour charges etc. complete. Ref : OBI10 |
| 151 | Ext. S/D PortionSupplying all materials, labour, T&P and laying in trenches (to level or slope) unplasticized P.V.C. pipe conforming to IS 4985/2000 of the following out side dia for class- 3 (0.60mpa ) including jointing with supply of approved solvent cement by non-heat application method/as per manufacture's specification, provoding and laying in trench cement concrete (1:4:8) with 40mm size hard granite metal in the type C-1 standard bedding surrounding or encasing including concrete for bedding and curing etc all complete as per P.H. specification and direction of the Engineer in charge100mm dia P.V.C. pipe |
| 152 | Supplying all materials labor T&P and constructing MH chamber of sizes earth work in excavation in all kinds of soil CC(1:1:8) with black granite chips size 46mm brick work with K.B. brick having crossing strength not less than 75 Kg /CM2 to 90 Kg/CM2s in CM(1:6)12mm C.P(1:8) inside MH chamber over benching with cement slush pointing (1:3)outside the MH chamber providing painting MS or CI step iron RCC(roof of slab with CC(1:2:4)with black granite chips size 12mm bending binding tying the grills placing of the reinforcement providing RCC color of required size refilling the cavity around the MH chamber with excavated earth including channeling the bed of MH etc all complete as per PH specification. MH size 0.91m x 0.91 m with 0.45 m (18” dia RCC Cover ) |
| 153 | Supplying all materials labour T&P and constructing 1.40m dia x 2.00 m deep soak way pit with dry brick having crossing strength not less than 75Kg/CM2 to 99Kg/CM2 in CM(1:6) for the remaining 0.4572mm height of wall at top CC(1:3)inside and outside inside fill with dry brick khoa size 38mm ,CM thick RCC perforated slab to a height of 1.9012m from bottom covered by means of 50mmthick RCC wall cover in pieces filled with iron plugs including earth work in excavation refilling of cavity around the pit and painting the iron works complete as per PHD design and specification including carriage of all materials to site. |
| 154 | 1 Nos 20 Users septic tank Earth work in excavation of foundation in all kinds of soil with in 1.5m initial lift including dressing and leveling of bed and breaking the clods and the excavated materials with in 50m initial lead as per direction of Engineer in charge. |
| 155 | Earth work in excavation of foundation in all kinds of soil with in 1.5m initial lift including dressing and leveling of bed and breaking the clods and the excavated materials with in 50m initial lead as per direction of Engineer in charge with 1st extra lift of 1.50 m over initial laft. |
| 156 | Supplying all labor T&P & filling foundation and plinth with excavated materials well watered & rammed etc. all complete as per direction of EIC. |
| 157 | Supplying all materials, labour, T&P and providing cement concrete (1:3:6) with 4cm size hard granite metal including watering, curing, conveyance of all materials to worksite, payment of royalty, taxes etc all complete as per specification and direction of the Engineer in charge |
| 158 | Supplying all materials, labour, T&P and providing cement concrete ( 1:2:4 ) with 12mm size crusher broken hard black granite chips including watering, curing,cost of all materials, conveyance of all materials to work site with payment of royalty, all taxes etc all complete as per P.W.D specification and direction of Engineer-in-charge |
| 159 | Supplying all materials, labour, T&P and providing cement concrete (1:1½:3) with 12mm size crusher broken hard black granite chips for RCC works including hoisting, laying, watering, curing,cost of all materials, conveyance of all materials to worksite, payment of royalty,all taxes etc. all complete as per PWD specification and direction of the Engineer in charge. |
| 160 | Supplying all materials, labour, T&P and providing steel reinforcement of Fe-415 /Fe-500 grade for RCC work including cutting,bending,binding and tying the grills and placing in position including cost of binding wire 18 to 20 gauge,cost of steel, conveyance of all materials to worksite, payment of royalty,all taxes etc all complete as per PWD specification and direction of the Engineer-in-charge. |
| 161 | Supplying all materials, labour, T&P and providing rigid & smooth centering and shuttering for RCC works including false work and dismantling them after casting including conveyance of all materials to worksite, payment of royalty, taxes etc. all complete as per specification and direction of the Engineer-in-chargeRCC floor, roof slab chhaja up to 4.430 m height |
| 162 | Supplying all materials.labour.T&P and providing brick work in foundation and plinth with KB bricks having curshing strength not less than 75 kg/sqcm with dimensional tolerance+ 8% in cement mortar ( 1:6 ) including watering,curing,cost of all materials,conveyance of all materials to worksite,payment of royalty,all taxes etc.all complete as per PWD specification and direction of the Engineer in charge. |
| 163 | Supplying all materials,labour,T&P and providing 12mm thick cement plaster(1:3) on brick work including watering,curing,cost of all materials, conveyance of all materials to worksite,payment of royalty,all taxes etc.all complete as per PWD specification and direction of the Engineer-in-charge. |
| 164 | Supplying all materials, labour, T&P and providing cement punning including watering, curing,cost of all materials, conveyance of all materials to worksite, payment of royalty,all taxes etc. all complete as per specification and direction of the Engineer-in-charge |
| 165 | Supplying all materials labour T&P and fitting and fixing 12mm dia MS/CI step iron including supply of necessary CC(1:2:4) for fixing etc. complete as per PH specification. |
| 166 | Supplying all materials, labour T&P for providing fitting & fixing 150mm x 150mm SW Tee in wall including filling the recess with cement concrete (1:2:4) with 12mm size HG chips all complete including watering curing conveyance of all materials to work site payment of royalty all complete as per specification and direction of Engineer in charge. |
| 167 | Supplying all materials labour T&P filling sand in lavatories well watered and rammed including lead of materials to work site. Please Enable Macros to View BoQ information |
