|
| 1 | Item No.1 :- Cleaning & removing grass bushes, shrubs etc. stacking the stuff up to a lead of 15m. And lift 1.5m with all lead and lift etc complete. |
| 2 | Item No.2:Excavation for foundation in earth, soil of all types, sand, gravel and soft murum, including removing the excavated material up to a distance of 50 m. beyond the building area and stacking and spreading as directed, dewatering, preparing the bed for the foundation and necessary backfilling, ramming, watering including shoring and strutting etc. complete. (Lift upto 0.00 to 1.50 m.) By Manual Means |
| 3 | Item No.3:Excavation for foundation in hard murum including removing the excavated material up to distance of 50 metres beyond the building area and stacking and spreading as directed, dewatering, preparing the bed for the foundation and necessary back filling, ramming, watering including shoring and strutting etc.complete.(Lift upto 1.50 m) By Manual Means |
| 4 | Item No.4:Providing and laying Cast in situ/ Ready Mix cement concrete in M15 of trap /granite /quartzite /gneiss metal for foundation /steps including steel centering, formwork, laying /pumping, compacting, roughening the mif special finishis to be provided, finishing unevenan d honey combed surface and curing etc. complete. The Cement mortar1:3 plaster is considered forr end ering uneven and honey combed surface ,only. Newly laid concrete shall be covered by gunny bag, plastic, tarpaulinetc .(Wooden centering will not be allowed.), with fully automatic micro process or based PLC with SCADA enabled reversible Drum Typemixer /concrete Batch mix plant (Pan mixer) etc. complete. With fine aggregate (Crushed sand VSI Grade) |
| 5 | Item No 5.:- providing laterite stone masonry in cement mortar 1.6 in foundation and plinth including striking joints on the unexposed faces and watering with all lead and lift etc complete. (Laterite stone six sides cut and thickness of mortar joints shall be 12mm max |
| 6 | Item No 6: Providing and laying damp proof course 50mm thick inM20 cement concrete layer and bitumen/ using cement with water proofing compound curing, formworketc. complete. |
| 7 | Item No.7:Filling in plinth and floors with approved excavated material in 15cm .to 20cm. Layers including watering and compacting etc. complete.. |
| 8 | Item No 8. :- Providing laterite stone masonry in cement mortar 1.6 in superstructure including racking out joints where plastering is to be done watering and sacffolding with all lead and lift etc complete. ( Laterite stone six sides cut and thickness of mortor joints shall be 12mm max) |
| 9 | Item No.9: Providing and fixing in position. (as per I.S.1868/1982) Aluminium sliding window of two tracks with rectangular pipe having over all dimension 63.50x38.10x1.02 mm at weight 0.547 Kilogram/One Running Metre. and window frame bottom track section 61.85x31.75x1.20mm at weight 0.695 Kilogram/One Running Metre. Top and side track section 61.85x31.75x1.30mm at weight 0.659 Kilogram/One Running Metre. The shutter should be of bearing bottom 40x18x1.25mm at weight 0.417 Kilogram/One Running Metre. Inter locking section 40x18x1.10mm at weight 0.469 Kilogram/One Running Metre. And handle section 40x18x1.25mm at weight 0.417 Kilogram/One Running Metre. and top section 40x18x1.25mm at weight 0.417 Kilogram/Running metre. As per detailed drawings and as directed by Engineer incharge with allnecessary Aluminium sections fixtures and fastenings such as roller bearing in nylon casing and self locking catch fitted in vertical section of shutter including 5 mm thick plain glass with all required screws and nuts etc, complete. With powder coating with box |
| 10 | Item No.10: Providing and laying Cast in situ /Ready Mix cemen tconcrete M-20 of trap /granite /quartzite /gneiss metal for R.C.C. beams and lintels as per detailed designs and drawings or as directed including steel centering, formwork, coverblocks, laying/ pumping, compaction and roughening the surface if special finish is to be provided and curing etc.complete. (Excluding reinforcement and structural steel ).with fully automatic micro process or based PLC with SCADA enabled reversible Drum Type mixer /concrete Batch mix plant (Panmixer) etc. complete. With fine aggregate (Crushed sand VSI Grade) |
| 11 | Item No 11.:- Providing & casting in situ cement M-20 of trap metal for R.C.C. chajja as per detailed designes and drawings, including centering, plywood/steel form work compacting roughening the surface if special if special finish is to be provided and curing ( Excluding steel reinforcement) including admixture/plasticizers/water proofing agents with all lead and lift etc complete. |
| 12 | Item No.12 : Providing and laying Cast in situ /Ready Mix cement concrete M-20of trap /granite /quartzite /gneiss metal for R.C.C. slabs and landings as per detailed designs and drawings including steel centering, formwork, coverblocks, laying /pumping, compaction finishing the formed surfaces with cement mortar1:3 of sufficient minimum thickness to give as mooth and even surface or roughening if special finish is to be provided and curing etc.complete, (Excluding reinforcement and structural steel).with fully automatic mic oprocess or based PLC with SCADA enabled reversible Drum Type mixer /concrete Batch mix plant (Panmixer)etc.complete.With fine aggregate (Crushed sand VSI Grade) |
| 13 | Item No.13 : Providing and fixing in position TMT- FE-500 bar reinforcemen to f various diameters for R.C.C. pile caps, footings, foundations, slabs, beams columns, canopies, stair case, newels, chajjas, lintels pardis ,copings, fins, arches etc. as per detailed designs, drawings and schedules. including cutting, bending, hooking the bars, binding with wires or tack welding and supporting as required complete. |
| 14 | Item NO 14:- Providing internal cement plaster 12mm thick ins single coat in cement mortar 1:3 without neeru finish to concrete or brick surfaces in all positions including racking out joints scaffolding and curing with all lead and lift etc complete. |
| 15 | Item No.15: Providing rough cast cement plaster externally in two coats to concrete, brick or stone masonry surfaces in all positions with base coat of 12 to15 mm thick in C.M.1:4 and rough cast treatment 12mm thick in proportion1:11/2:3 including scaffolding and fourteen days curing complete. |
| 16 | Item No.16: Providing and fixing green marble of 18 to 20 mm thick for door frame/ dado/ window boxing etc. On C.M. 1:6 including filling joints with polymer base filler nosing / moulding the sharp edges wherever necessary, curing, etc. complete. |
| 17 | Item No.17: Providing and fixing solid core flush door shutter in single leaf 32mm thick decorative type of exterior grade as per detailed drawings approved face veneers 3mm thick on both faces or as directed, all necessary beads, mouldings and lipping, wrought iron holdfasts, chromium plated fixtures and fastenings, with brass mortise lock, chromium plated handles on both sides, and finishing with French Polish etc. complete. |
| 18 | Item No 18:- Providing and laying polished hand cut Kotah Stone flooring 25mm to 30mm thick and 45 cm to 55 cm wide in plain/diamond pattern on a bed of 1:6 C.M. including cement float, filling joints with neat cement slurry, curing, polishing and cleaning complete. |
| 19 | Item No 19:- Providing and applying Bitumen VG30/VG40 layer at 2 Kilogram. Per One Square Meter over the terrace, structural slab including cleaning the surface for waterproofing as directed complete |
| 20 | Item No 20 :- Providing and applying three coats of water proof cement paint of approved manufacture and of approved colour to new plastered surfaces including scaffolding if necessary, cleaning and preparing the surface, watering for two days etc. complete |
| 21 | Item No 21: Providing and applying white-wash in two coats on old / new plastered or masonry surfaces and asbestos cement sheets including scaffolding and preparing the surface by brushing and brooming down etc. complete. |
| 22 | Item No.22: Providing and fixing white glazed earthenware Wash Hand Basin of 55cm. x 40 cm. size including cold water pillar tap/cold and hot water pillar tap brackets, rubber plugs and brass chain, stop tap and necessary pipe connections including P.V.C. waste pipe and trap up to the outside face of the wall. Making good the damaged surface, testing etc. complete. |
| 23 | Item No.23: Providing and fixing Orissa Pan of size 580x445x260 mm with approved make flush valve including trap, C.I. soil and vent pipe upto outside face of wall including 100mm dia. C.I. plug, bend and necessary pipe connection, etc complete. As directed by Engineer in charge. |
| 24 | Item No.24: Providing and fixing 34mm thick moulded door shutter consisting of solidcore single leaf flush door of 30mm thickness lipped with 15mm(5mmx3)thickx30mm width on one style and top rail and 10mm(5mmx2)thickx30mm width on other style and bottom rails. The inner panels laminated with2mm thick termiteproof, waterproof and fire resistant moulded PVC sheet with2,4,6design in different plainand/ or prelimcolours on oneside after routing the moulded design on flush door and2mm plainand/orprelam PVC on other side using rubber adhesive on flush door and solvent cement adhesive on the PVC lipping etc. as per direction of Engineer incharge and manufacturers specification and drawing etc. complete. |
| 25 | Item No.25: Providing & Fixing on walls /ceiling/floor 15 mm dia CPVC pipe with necessary fittings ,remaking good the demolished partition etc. complete including removing the existing pipe line if necessary and conveying & stacking the same in the PWD chowky or as directed etc.complete. |
| 26 | 15 mm |
| 27 | Item No.26: Providing and constructing Brick Masonry Inspection chamber 90x45 cm x 90 cm in depth including 1:4:8 cement concrete foundation, 1:2:4 cement concrete channels,half around ,glazed stonware pipes, brick masonry, plastering from inside and with frame fixed in cement concrete with R.C.C. cover medium duty 140 kg.etc.complete. |
| 28 | Item No.27: Providing and fixing 10 cm dia. P.V.C. Nahani Trap fixed with P.V.C. grating etc.complete. |
| 29 | Item No.28: Providing & Fixing 100 mm diameter stabiliser pipe /PVC soil vent /waste water pipe and with necessary fixture and fitting such as bends ,tees,single juctions,slotted vent,clamps etc.complete. |
| 30 | Item No.29: Providing and fixing hume pipe septic tank 900 mm diameter with vent pipe and cap including necessary ( including excavation and laying) |
| 31 | Item No.30: Providing soak pit of size 120x120x120cm including excavating and filling with brick bats. |
| 32 | Item No.31: Providing and fixing C.P. BIB cock with wall flange of approved make including necessary sockets/ union nut etc. complete. |
| 33 | Item No.32: Providing & Fixing H.D.P. container syntex or alike one piece of moulded water tank made out of high density polythyler and bult corrugated inclusive of delivery up to destination hoisting and fixing of accessories such as inlet ,outlet overflow pipe inclusive of all tanks capacity betn 200 to 1000 litre |
| 34 | Item No.33 : Point wiring in PVC trunking (casing-capping) with 1.5 sq.mm (2+1E) FRLSH grade copper wire, modular type switch, earthing and required accessories as per specification No: WG-PW/SW |
| 35 | Item No.34 : Supplying and erecting regular/ standard model ceiling fan of 1400mm. sweep complete erected in position as per specification no. FG-FN/CF |
| 36 | Item No.35 : Supplying and erecting LED square / circular 16 to 20W down lighter having pressure die-cast aluminium housing, opal translucent cover, mounting arrangement with board for surface type or spring loaded mounting clips for flush type complete |
| 37 | Item No 36:Providing and fixing mild steel grill work for windows, ventilators etc. 20 Kilogram/One Square Metre as per drawing including fixtures, necessary welding and painting with one coats of anticorrosive paint and two coats of oil painting complete. |
| 38 | Item no 37: Providing dry / trap / granite / quartzite / gneiss rubble stone soling 15cm to 20cm thick including hand packing and compacting etc. complete. |
| 39 | Item No.38 : Supply & Fixing of Full Body Vitrifid Step tiles Ready to install Treads and Risers 12 mm thick, required width and required finish in plain pattern including Cement float, filling joints, with neat cement slurry, Natural sand, curing and cleaning etc complete. |
| 40 | Item No.39 : Supplying and erecting minimum Three & above star rated 1 phase, 230 V, 50 Hz, submersible pump set of 0.75 KW/1HP for erection on open well, pump having delivery head from 30 to 15 m and discharge from 30 to 270 litres. per minute & pipe of Suction 32 mm/Delivery 25 mm diameter erected with necessary H type clamps as per specification No. WP-OSP |
| 41 | Item No.40 : Supplying & erecting automatic control panel for 1 Ph, 230 volt, A.C. ubmersible/centrifugal pump set up to 3 HP consisting of DOL starter Of suitable relay range S.P.P., Combined ammeter/ voltmeter, phase indicating lamp enclosed in CRCA powder coated Vibration proof enclosure with IP 54 protection. |
| 42 | Item No.41 : Supplying & erecting flat flexible 3 core 4 sq.mm PVC sheathed submersible type copper cable suitably clamped at fixed intervals with column pipe assembly complete. |
| 43 | Item No.42: Sofa Set 3+1+1 Providing & fixing Sofa Set 3+1+1 Brown and Cream leather DIMENSION Length:182.5 (cms) Breadth (cms):100 (cms) Height (cms):100(cms) Weight (Kilograms) :66 (Kilogram) Seating Capacity: Five Seat |
| 44 | Item No.43: Tea Table 900mm X 750mm X 450mm for m.s. ante chamber Providing And Fixing Of Tea Table 900 mm X750 mm X450mm With 12mm Thick Colour Eitched Tempered Glass With Bevelled Drawing Made Out Of 18mm Thick Water proofing Ply. The Outer Laces To Be Finished With High Quality 4Mm Thik Veneer Or 1 Mm Thik Mica Etc. |
| 45 | Item No.44: Providing CPVC 40 MM dia Pipe |
| 46 | Item No. 45: Free Standing Table @ 1200Lx600Dx750HT Providing and fixing Table of Size 1200x600x750mm. Top: made from 25mmP relaminated Particle board. All edges are covered by 2mm. Thk. PVC edge bands glued by hot melt glue applied by auto edge banding machine. Legs: C Shape made from CRCA Sheet with Powder Coat finish. Mode sty panel: Made from 18mm both side prelaminated particle boards. All edges are covered by 0.8mm PVC edge bands glued by hot melt glue applied by auto edge banding machine. KEY BOARD TRAY (WITHOUT MOUSE TRAY):- Metal Powder Coated- Black Color, CPU TROLLEY: Metal Powder Coated-Black Color, 3 DRAWER PEDESTAL UNIT having over all size 392Lx450Dx680 Ht. mm. with central lock and key. Drawers and body are complete metal with powder coat finish, facia in 18mm prelaminated particle board, |
| 47 | Item No 46: Providing & Arrangemnt of High BackChair TILT MECHANISM WITH MULTILOCKING, HIGH DENSITY CUSHION ON SEAT COMPOSITE LEATHER WITH METALLIC SILVER FINISH BASE AND ARMS WITH P.U.CASTORS GAS LIFT FOR HEIGHT ADJUSTMENT. |
| 48 | Item No: 47: Providing & Arrangemnt of Mid Back, ECO CTS Mechanism, Fixed Armrest, Gaslift for Seat height adjustment, Standard 5-prong P/Nylon Base with Fabric Upholstery |
| 49 | Item No 48: Medium Height Steel Storage @ 750Lx450Dx1200HT Providing and fixing Openable Stee lStorage of 750x450x1200Ht, with 2 adjustable shelves, Complete body & shutter made in 0.8 mm thick & Top in 2mm thick CRCA, 2 Shutter to be mounted with the help of cup hinges, and 4 adjustabl elevelers, enitre storage in powder coated finish with 60 to 80 microns. with 25 mm. thk. as per drawing. |
| 50 | Royalty Charges |
| 51 | Labour Insurance @ 0.5% Please Enable Macros to View BoQ information |
