|
| 1 | Earth work in excavation by mechanical means (Hydraulic excavator) / manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan) including dressing of sides and ramming of bottoms, lift up to 1.5 m, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m. |
| 2 | All kinds of soil. |
| 3 | Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level : |
| 4 | 1:2:4 (1 cement : 2 coarse sand(zone-III) derived from natural sources : 4 graded stone aggregate 20 mm nominal size derived from natural sources) |
| 5 | Repairs to plaster of thickness 12 mm to 20 mm in patches of area 2.5 sq.meters and under, including cutting the patch in proper shape, raking out joints and preparing and plastering the surface of the walls complete, including disposal of rubbish to the dumping ground, all complete as per direction of Engineer-in-harge. |
| 6 | With cement mortar 1:4 (1 cement : 4 fine sand). |
| 7 | Removing white or color wash by scrapping and sand papering and preparing the surface smooth including necessary repairs to scratches etc. complete |
| 8 | Distempering with 1st quality acrylic distemper (ready mixed) having VOC (Volatile Organic Compound ) content less than 50 gram/ litre, of approved brand and of required shade and colour complete to give and even shade. |
| 9 | Old work (one or more coats) |
| 10 | Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade : |
| 11 | One or more coats on old work. |
| 12 | Finishing walls with Acrylic Smooth exterior paint of required shade |
| 13 | Old work (One or more coat applied @ 0.90 ltr/10 sqm). |
| 14 | Disposal of building rubbish / malba / similar unserviceable, dismantled or waste materials by mechanical means, including loading, transporting, unloading to approved municipal dumping ground or as approved by Engineer-in-charge, beyond 50 m initial lead, for all leads including all lifts involved. |
| 15 | Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings. This includes jointing of pipes & fittings with one step CPVC solvent cement, trenching, refilling & testing of joints complete as per direction of Engineer in Charge : External work |
| 16 | 15 mm nominal outer dia. Pipes. |
| 17 | 20 mm nominal outer dia. Pipes. |
| 18 | 25 mm nominal outer dia. Pipes. |
| 19 | 32 mm nominal outer dia. Pipes. |
| 20 | Providing and fixing C.P. brass bib cock of approved quality conforming to IS:8931: |
| 21 | 15 mm nominal bore. |
| 22 | Providing and fixing C.P. brass stop cock (concealed) of standard design and of approved make conforming to IS:8931. |
| 23 | 15 mm nominal bore. |
| 24 | Providing and fixing PTMT bib cock of approved quality and colour. |
| 25 | 15mm nominal bore, 86 mm long. Weighing not less than 88 gms. |
| 26 | Providing and fixing PTMT stop cock of approved quality and colour. |
| 27 | 15 mm nominal bore, 86 mm long. Weighing not less than 88 gms. |
| 28 | Providing and fixing PTMT pillar cock of approved quality and colour . |
| 29 | 15mm nominal bore, 107 mm long. Weighing not less than 110 gms. |
| 30 | Providing and fixing unplasticised P.V.C. connection pipe with PTMT Nuts, collar and bush of approved quality and colour. |
| 31 | 15 mm nominal bore with 30 cm length. |
| 32 | 15 mm nominal bore with 45 cm length. |
| 33 | Providing and fixing PTMT Waste Coupling for wash basin and sink, of approved quality and colour. |
| 34 | Waste coupling 31 mm dia of 79 mm length and 62 mm breadth weighing not less than 45 gms. |
| 35 | Providing and fixing P.V.C. waste pipe for sink or wash basin including P.V.C. waste fittings complete. Semi rigid pipe |
| 36 | 32 mm dia |
| 37 | Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever require: |
| 38 | White Vitreous China Flat back wash basin size 550x 400 mm with single 15 mm C.P. brass pillar tap |
| 39 | Providing and fixing P.V.C. low level flushing cistern with manually controlled device (handle lever) conforming to IS : 7231, with all fittings and fixtures complete. |
| 40 | 10 litre capacity - White |
| 41 | Providing and fixing white vitreous china water closet squatting pan (Indian type) : |
| 42 | Orissa pattern W.C. pan of size 580x440 mm |
| 43 | Providing and fixing white vitreous china pedestal type (European type/ wash down type) water closet pan. |
| 44 | Providing and fixing 8 mm dia C.P. / S.S. Jet with flexible tube upto 1 metre long with S.S. triangular plate to Eureopean type W.C. of quality and make as approved by Engineer - in - charge. |
| 45 | Providing and fixing solid plastic seat with lid for pedestal type W.C. pan complete : |
| 46 | White solid plastic seat with lid |
| 47 | Coloured (other than black & white) solid plastic seat with lid |
| 48 | Taking out existing wooden door shutter, repairing by cutting, painting etc. and refixing of repaired door shutters to existing door frames, including replacement of hinges with screws, etc. as required, all complete as per the direction of the Engineer-in-charge. |
| 49 | Providing and fixing to existing door frames. |
| 50 | 24 mm thick factory made PVC door shutters made of styles and rails of a uPVC hollow section of size 59x24 mm and wall thickness 2 mm (± 0.2 mm) with inbuilt edging on both sides. The styles and rails mitred and joint at the corners by means of M.S. galvanised/plastic brackets of size 75x220 mm having wall thickness 1.0 mm and stainless steel screws. The styles of the shutter reinforced by inserting galvanised M.S. tube of size 20x20 mm and 1 mm (± 0.1 mm) wall thickness. The lock rail made up of ‘H’ section, a uPVC hollow section of size 100x24 mm and 2 mm (± 0.2 mm) wall thickness, fixed to the shutter styles by means of plastic/galvanised M.S. ‘U’ cleats. The shutter frame filled with a uPVC multi-chambered single panel of size not less than 620 mm, having over all thickness of 20 mm and 1 mm (± 0.1 mm) wall thickness. The panels filled vertically and tie bar at two places by inserting horizontally 6 mm galvanised M.S. rod and fastened with nuts and washers, complete as per manufacturer’s specification and direction of Engineer-in-charge. (For W.C. and bathroom door shutter). |
| 51 | Renewal of old putty of glass panes (length) at any height up to floor five level location within the premises. |
| 52 | Renewing glass panes, with putty and nails wherever necessary including racking out the old putty at any height up to floor five level location within the premises. |
| 53 | Float glass panes of nominal thickness 4 mm (weight not less than 10kg/sqm). |
| 54 | Providing and fixing aluminium sliding door bolts ISI marked anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade with nuts and screws etc. complete : |
| 55 | 300x16 mm |
| 56 | 250x16 mm |
| 57 | Providing and fixing aluminium tower bolts ISI marked anodised (anodic coating not less than grade AC 10 as per IS : 1868 ) transparent or dyed to required colour or shade with necessary screws etc. complete : |
| 58 | 300x10 mm |
| 59 | 250x10 mm |
| 60 | Providing and fixing aluminium handles ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade with necessary screws etc. complete : |
| 61 | 125 mm |
| 62 | Providing and fixing aluminium hanging floor door stopper, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour and shade, with necessary screws etc. complete. |
| 63 | Single rubber stopper |
| 64 | Cleaning of terrace/loft water storage tank (inside surface area) upto 2000 litre capacity at all heights with coconut brushes, duster etc., removal of silt, rubbish from the tank and cleaning the tank with fresh water disinfecting with bleaching powder @ 0.5gm per litre capacity of tank, including marking the date of cleaning on the side of tank body with the help of stencil and paint and disposing of malba, all complete as per direction of Engineer-in-Charge. (The old date already written on tank should be removed with paint remover or black paint and if date is not written with the stencil or old date is not removed deduction will be made @ Rs. 0.10 per litre if during cleaning any GI fittings or ball cock is damaged that is to be repaired by contractor at his own cost and nothing extra will be paid on this account) |
| 65 | Structural steel work riveted, bolted or welded in built up sections, trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete. |
| 66 | Providing and placing on terrace (at all floor levels) polyethylene water storage tank, IS : 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank. |
| 67 | Clearing jungle including uprooting of rank vegetation, grass, brush wood, trees and saplings of girth up to 30 cm measured at a height of 1 m above ground level and removal of rubbish up to a distance of 50m outside the periphery of the area cleared. |
| 68 | Disconnecting damaged overhead/terrace PVC water storage tank of any size from water supply line and removing from the terrace as per direction of Engineer-in- charge. |
| 69 | Providing and fixing polyethylene cover for terrace water storage tanks with suitable locking arrangement for tank. |
| 70 | Providing and fixing C.P. brass pillar cock of approved quality conforming to IS:8931: |
| 71 | 15 mm nominal bore. |
| 72 | Providing and fixing ball valve (float valve for water tanks)of approved quality, High or low pressure, with plastic floats complete : |
| 73 | 15 mm nominal bore |
| 74 | 20 mm nominal bore |
| 75 | Providing and fixing plain polycarbonate sheet works (excluding supporting framework) fitted and fixed with reqd nuts & bolts ,screws etc as per direction of E-in-C Transparent/Green polycarbonate sheet(a) 1.5 mm thick |
| 76 | Repairing of existing window shutters wooden or steel by taking out , straightening and providing missing members etc. cutting and dressing to required size , and refixing of repaired window shutters to existing frames, including replacement of hinges with screws or welding etc. as required, all complete as per the direction of the Engineer-in-charge. |
| 77 | Laying red sand or other stone slabs over drains,chambers,grounds, gardens for covering horizontal ,vertical or inclined surface area jointing with cement mortar 1:3(1 cement:3 fine sand) laying over existing brick/stone/concrete work or ground surface at required line and level, including dressing/ leveling of the bed all complete. |
| 78 | Existing available Red sand stone /any other stone slabs of any size up to 40 mm thickness .Taking out from over drains , grounds and re- laying to new position including all lead and lift complete as per direction of engineer in charge . |
| 79 | Providing and fixing brass spindles of required size for |
| 80 | C.P. brass bib cock (15 mm nominal size ) |
| 81 | C.P. brass stop cock /angle cock (15 mm nominal size ) |
| 82 | C.P. pillar cock (15 mm nominal size ) |
| 83 | Repair of PVC low level flush tank by providing cistern set including providing handle and seal ring etc . All complete as per site requirement . |
| 84 | Renewal of white cement of tiles joints in floor tiles / wall tiles in toilet /bath or any such locations to prevent water leakage from joints .All operation including racking out and refilling joints and cleaning the surface.(at any floor level up to floor five ) . |
| 85 | Repairing of leakages like under floor in sewer /pipe lines , on internal and external wall face due to tree roots etc. in bathroom and W.C. (water closet )areas related to internal and external sewer/water supply lines , Execution of work by dismantaling of floor, tiles, cement concrete,RCC, Brick wall etc. , detection of leakage and exposing the sewer/GI/PVC pipes for repairing ,including taking out and refixing of w.c. sheet , floor trap, nahani trap , defective pipe fittings etc. and other fittings as required at site and refixing the same in position ,tightening of fixtures and sealing of pipe joints ,Making good the floor and wall surface with waterproofing compound and testing after completion of the repair work. ( Item includs cost of necessary pipe, pipe fittings and fixtuers , floor and wall repairing / replacing the floor or wall tiles of affected area. Nothing shall be paid extra for this , but excluding the cost of WC sheet ,and floor trap if required to replace. All work up to floor five level location within the premises . |
| 86 | Attending urgent complaints related to internal and external water supply lines and leakages , including detection and repair of leakages in GI/PVC pipes , refixing of loose joints, tightening of fixtures and sealing of pipe joints including minor excavation and refilling if required all complete for restoration of water supply . All work to be carried out at any height up to floor five level location within the premises attending the complaints and providing solution as per directed by the Engineer-in-Charge. |
| 87 | Clearing blockages in sewer lines, gully traps, manholes, storm water drain chambers by removing and refixing CI/SCI / concrete covers, scraping inside garbage ,silt and other deposits from manholes including connecting sewer line / drains ensuring free flow through sewer line /drain including lifting and disposal of garbage ,malba up to dumping area or beyond objectionable area as per direction of engineer in charge . |
| 88 | Supply and replacement of steel spindle for gate valve in water supply line including reassembling and testing for leak-proof operation. |
| 89 | For Gate valve 100mm (4\\") diameter pipe line |
| 90 | For Gate valve 150mm (6\\") diameter pipe line |
| 91 | Credit for taken out / replaced items |
| 92 | Unserviceable GI pipes any dia |
| 93 | Unserviceable Bib cock , stop cock , pillar cock |
| 94 | Unserviceable MS door fittings / fixtures Please Enable Macros to View BoQ information |
