|
| 1 | Dismantling tile work in floors and roofs laid in cement mortar includingstacking material within 50 metres lead. For thickness of tiles 10 mm to 25 mm DSR 15.23.1 |
| 2 | Dismantling old plaster or skirting raking out joints and cleaning thesurface for plaster including disposal of rubbish to the dumping groundwithin 50 metres lead SOR 706 |
| 3 | 40 mm thick C.C. flooring in 1:2:4: cement coarse sand & 12 mm gauge stone grit laid over floatjng coat of neat cement including fixing of glass strips (but execluding cost of glass strips)SI NO 601 |
| 4 | Providing and fixing 25 mm thick shutters for cup board etc. :Ist class teak wood including nickel plated bright finished M.S. piano hinges with necessary screws. Dsr 14.26.1.2 |
| 5 | Providing and laying vitrified floor tiles in different sizes (thickness to bespecified by the manufacturer) with water absorption less than 0.08% andconforming to IS: 15622, of approved make, in all colours and shades, laid on20mm thick cement mortar 1:4 (1 cement : 4 coarse sand), jointing with greycement slurry @ 3.3 kg/ sqm including grouting the joints with white cementand matching pigments etc., complete. cpwd 11.41.2 Size of Tile 600x600 mm |
| 6 | 12mm Thick Plastering in 1:3 Cement and Coarse sand morter over plain surface I/C all complete as per SI No.583 |
| 7 | P/F of plain gypsum board false ceiling at all height including providing and fixing of frame work made of special sections power pressed from ms sheet and galvanized with zinc coating of 120 gms/sqm (both side inclucive)as per is 277 and consiting of angle cleats of size 25mm wide and 1.6mm thick with flange of 27 mm and 37 mm at 1200mm center to center one flange fixed to the ceiling with dash fastener 12.5 mm dia and 50 mm long with 6 mm dia bolt other flange of cleat fixed to the angle hangers of 25*10*0.05 mm of required length with nuts&bolts of required size and other end of angle hanger fixed with intermediate gi channels 45mm*15mm*0.09 mm runnig at spacing of 1200 mm center to center to which the ceiling sectoin 0.5 mm thick bottom wedge of 80 mm with tapered flange of 26 mm each having lips of 10.5 mm at 450 mm c/c shall be fixed ina direction perpendicular of GI intermediate channels with connecting clip made out of 2.64 mmdia *230mm long gi wire at every junction includig fixing perimeter channels 0.5 mm thick 27 mm high having flange 0f 20mm and 30 mm long the perimeter of ceiling fixed to wall/ partition with the help og rawl plug at 450 mm center with 25mm long dry wall screw @230mm inteval including fixing gypsum board to ceiling section and perimeter channel wiuh the help of dry wall screw of size 3.5mm*25mm at 230 mm c/c includig jointing and finishing to a flush finished tapered and square edge of the board with recomanded jointig compound jointig tape finishing compound in 3 layer covering up to 150mm on both side of joints and two coat of primer suitable board all as per manufacture specifications and also including the cost of making opening for the light fittings grills diffusuers cutout made with frame of perimeter channels suitably fixed all complete as per drawing specification and direction of the engineer incharge but excluding the cost of painting(12.5 mm thick tapered edge gypsum board confirming to is 2095-part-112.45.2 12.5 mm thick tapered edge gypsum fire resistant board conforming to IS: 2095- Part I (CPWD code no 12.45.3) (2021) |
| 8 | Wiring point for light with 1.5 sq mm FRLSH PVC insulated single core copper conductor cable in PVC condute with 1.5 sq mm FRLSH PVC insulated multistrand copper conductor cable as earth wire drawn inside the condute. GP Box, piano type switch & ceiling rose/ angle/ batten holder on 3mm thick phenolic laminated backlite sheet etc.Complet in all respect. Add for light / fan points with modular type switch in place of piano type switch. SI No. 131 (C) + 187 (A) Rs. 518+125=643.00 |
| 9 | Wiring point for fan /fresh air fan (light duty exhaust fan) with 1.5 sq mm. FRLSH PVC insulated multistrand single core copper conductor cable in PVC condute with 1.5 sq mm FRLSH PVC insulated multistrand copper conductor cable as earth wire drawn inside the condute GP Box, piano type switch & ceiling rose/ angle/ batten holder on 3mm thick phenolic laminated backlite sheet etc.Complet in all respect. Add for light / fan points with modular type switch in place of piano type switch. SI No. 133 (C) + 187 (A) Rs. 595+125=720.00 |
| 10 | Wiring point for plug with 1.5 sq mm FRLSH PVC insulated single core copper conductor cable in PVC condute with 1.5 sq mm FRLSH PVC insulated multistrand copper conductor cable as earth wire drawn inside the condute. GP Box, piano type switch and socket etc. Complet in all respect. Add for plug point with modular switch and socket in place of piano type switch SI No. 134 (C)+187 (A) Rs.335+125=400.00 |
| 11 | Supply and fixing of power plug with 20 Amp./250 volt flush type modular switch and 5 pin 20A/250 volt flush type universal modular socket switch on concealed M.S. Box including supply of all material, labour T&P etc. Require for proper completion of work. SOR SI No. 1139 (A) |
| 12 | Supply and fixing of power plug with 15 Amp./250 volt flush type switch and 5 pin 15A/250 volt flush type universal socket switch in suitable M.S. Box of 175 mm x 100 mm x 50 mm size with phenolic laminted bakelite sheet cover 3mm thick fixed with brass machine screw and cup washer .SOR SI No. 1139 |
| 13 | Supply and Fixing of 100 Amp. 4 pole isolator. SOR 1007 (C) CAT B |
| 14 | Supply and Fixing of LED Tube light with batten suitable for up to 1x22 watt LED tube light fitting including tube on Surface complete in all respect. SOR S.I. No. 1413 CAT-AA |
| 15 | Supply and fixing of electronic fan regulator ( Modular ) 120-280 V. ISI marked, on the existing switch board including making connections, required materials, labour T&P etc. For proper completion of work to the satisfaction of Engineer in charge of work. SOR SI No. 1203 (C) |
| 16 | Supply and fixing of recess/ Surface/ Pendent mounting round 10 to 15 Watt LED Down Lighter having Powder coated die cast aluminium housing with heat sink, diffuser/ Reflector and driver set complete in all respe si no 1401 (CAT- A AA) |
| 17 | Painting old surface & two coat of approved paint I/C all complete as per sch p.w.d.642 page 32 |
| 18 | Providing and fixing panelling waterproof,pare soffit wall panels and all completion of work (rate sanction by SERED_ Please Enable Macros to View BoQ information |
