|
| 1 | Clearing jungle including uprooting of rank vegetations, grass,bush,wood trees and saplings of girth up to 30 cm. measured at a height of 1.00 M. above ground level and removal of rubbish up to a distance of 50.00M.Out side the peripheri of area cleared as per E/I & dsr2.31 |
| 2 | Earthwork in Excavation in foundation in Ordinary Soil including Lift up to 1.50 M. and Lead up to 30.00m. Including all Complete as per dsr2.1.1 |
| 3 | Concrete with 40 mm gauge B/Ballast,Fine sand of 1.25 FM.and Cement in proportion of 12:6:1 in Foundation and under Floor I/C Supply of all material labour and T&P etc.all complete as per S.I.No.273. |
| 4 | Class M-150 Brick work in 1:6 Cement and Coarse sand of 1.25FM.morter in foundation and plinth I/C all complete as per dsr 6.1.1 |
| 5 | R.C.C.Work in 1:2:4 cement coarse sand &20 MM stone grit in sill band, lintel band,sun shade I/C all Complete as per dsr 5.3 |
| 6 | Earth work in filling or in Embankment in Ordinary soil I/C 1.00Km. Extra cartage from site as per S.I. No.253 |
| 7 | Fabrication & supply of angle iron or T-Iron door / window chaukhat frame,record racks etc.I/C cost of steel all carriage,welding,cutting,labour,smooth finishing staple plate 6 mm thick welded in back plain of hinges I/C all Complete as per si no502 (1) (40x40x6 or 35x35x5 ) dsr 10.1 |
| 8 | Class M-150 Brick work in 1:4 Cement and coarse sand of 1.25FM.morter in superstructure I/C all complete as per dsr 6.4.1 |
| 9 | Class M-150 Brick work in 1:4 Cement and coarse sand of 1.25FM.morter in superstructure I/C all complete as per dsr 6.4.1 |
| 10 | R.C.C.Work in 1:1.5:3 cement coarse sand & 20 MM stone grit in Lighter Beam I/C all Complete as per dsr 5.30 |
| 11 | R.C.C.Work in 1:1.5:3 cement coarse sand & 20 MM stone grit in Lighter Beam I/C all Complete as per dsr 5.30 |
| 12 | R.C.C.Work in 1:1.5:3 cement coarse sand & 20 MM stone grit in Lighter Beam I/C all Complete as per dsr 5.30 |
| 13 | M.S. OR Iron Work in plain work such as R.C.C./R,B. work as per dsr 5.22.1 |
| 14 | Providing Mild Steel Fan hook 16 mm dia I/C all complete of works as per dsr 10.17 |
| 15 | Concrete with 40 mm gauge B/Ballast,Fine sand of 1.25 FM.and Cement in proportion of 12:6:1 in Foundation and under Floor I/C Supply of all material labour and T&P etc.all complete as per S.I.No.273. |
| 16 | 12mm Thick Plastering in 1:4 Cement and Coarse sand morter over plain surface I/C all complete as per dsr13.4.1 |
| 17 | 12mm Thick Plastering in 1:4 Cement and Coarse sand morter over plain surface I/C all complete as per dsr13.4.1 |
| 18 | Finishing walls with Acrylic Smooth exterior paint of required shade : New work (Two or more coat applied @ 1.67 ltr/10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/ 10 sqm) dsr 13.47.1 |
| 19 | Finishing walls with Acrylic Smooth exterior paint of required shade : New work (Two or more coat applied @ 1.67 ltr/10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/ 10 sqm) dsr 13.47.1 |
| 20 | 40 mm thick C.C. flooring in 1:2:4: cement coarse sand & 12 mm gauge stone grit laid over floatjng coat of neat cement including fixing of glass strips (but execluding cost of glass strips) dsr 11.30.1 |
| 21 | 40 mm thick C.C. flooring in 1:2:4: cement coarse sand & 12 mm gauge stone grit laid over floatjng coat of neat cement including fixing of glass strips (but execluding cost of glass strips) dsr 11.30.1 |
| 22 | Wiring point for light with 1.5 sq mm FRLSH PVC insulated single core copper conductor cable in PVC condute with 1.5 sq mm FRLSH PVC insulated multistrand copper conductor cable as earth wire drawn inside the condute. GP Box, piano type switch & ceiling rose/ angle/ batten holder on 3mm thick phenolic laminated backlite sheet etc.Complet in all respect. Add for light / fan points with modular type switch in place of piano type switch. SI No. 131 (C) + 187 (A) Rs. 518+125=643.00 |
| 23 | Wiring point for fan /fresh air fan (light duty exhaust fan) with 1.5 sq mm. FRLSH PVC insulated multistrand single core copper conductor cable in PVC condute with 1.5 sq mm FRLSH PVC insulated multistrand copper conductor cable as earth wire drawn inside the condute GP Box, piano type switch & ceiling rose/ angle/ batten holder on 3mm thick phenolic laminated backlite sheet etc.Complet in all respect. Add for light / fan points with modular type switch in place of piano type switch. SI No. 133 (C) + 187 (A) Rs. 595+125=720.00 |
| 24 | Wiring point for plug with 1.5 sq mm FRLSH PVC insulated single core copper conductor cable in PVC condute with 1.5 sq mm FRLSH PVC insulated multistrand copper conductor cable as earth wire drawn inside the condute. GP Box, piano type switch and socket etc. Complet in all respect. Add for plug point with modular switch and socket in place of piano type switch SI No. 134 (C)+187 (A) Rs.335+125=400.00 |
| 25 | Supply and fixing of power plug with 15 Amp./250 volt flush type switch and 5 pin 15A/250 volt flush type universal socket switch in suitable M.S. Box of 175 mm x 100 mm x 50 mm size with phenolic laminted bakelite sheet cover 3mm thick fixed with brass machine screw and cup washer .SOR SI No. 1139 |
| 26 | Supply of ceiling fan 1200 mm size . (Market rate for estimatig purpose) Havells Company dsr 19.10 |
| 27 | Centering and shuttering including strutting, propping etc. and removal (DSR 5.9.3) Suspended floors, roofs, landings, balconies and accessplatformof form for : |
| 28 | Centering and shuttering including strutting, propping etc. and removal (DSR 5.9.5) Lintels, beams, plinth beams, girders, bressumers andcantileverplatformof form for : |
| 29 | Centering and shuttering including strutting, propping etc. and removal (DSR 5.9.6) Columns, Pillars, Piers, Abutments, Posts and Strutsplatformof form for : |
| 30 | Laying Glass strips size 32 mm wide & 5.5 mm thick in floor I/C all complete of work |
| 31 | Providing & applying white cement based putty of average thickness 1.0 mm of approved brand & manufacture , overe the plastered wall surface to prepared the surface even and smooth complete CPWD 13.8 |
| 32 | Providing and fixing ISI marked flush door shutters conforming to IS : 2202(Part I) decorative type, core of block board construction with frame of 1stclass hard wood and well matched teak 3 ply veneering with vertical grains orcross bands and face veneers on both faces of shutters (30 mm thick including ISI marked Stainless Steel butt hinges with necessaryscrews cpwd 9.20.2) |
| 33 | S/F OF 4MM THICK GLASS PANS ETC COMPLETE WORK DSR 10.30.1 |
| 34 | Providing and fixing wash basin with C.I. brackets, 15 mm dia CP Brass single hole basin mixer of approved quality and make, including painting of fittings and brackets, cutting and making good the walls wherever required:(a) White Vitreous China Wash basin size 550x400 mm with a 15 mm CP Brass single hole basin mixer dsr 17.7A(A) |
| 35 | Providing & fixing 20mm dia G.I pipe s.i.no.2 |
| 36 | s/f of looking mirroratul make 600mm*450mmbevelled edge (si no 20) etc complete |
| 37 | 15 mm dia brass bib cock 400 gram s.i. no.43 |
| 38 | Concrete with 40 mm gauge B/Ballast,Fine sand of 1.25 FM.and Cement in proportion of 8:4:1 in Foundation and under Floor I/C Supply of all material labour and T&P etc.all complete as per S.I.No.275 |
| 39 | Class M-150 Brick work in 1:4 Cement and coarse sand of 1.25FM.morter in foundation I/C all complete as per si no 305b |
| 40 | R.C.C.Work in 1:2:4 cement coarse sand &20 MM stone grit in sill band, lintel band,sun shade I/C all Complete as per SI.NO.283 |
| 41 | 12mm Thick Plastering in 1:3 Cement and Coarse sand morter over plain surface I/C all complete as per SI No.583 |
| 42 | 12mm Thick Plastering in 1:3 Cement and Coarse sand morter over plain surface I/C all complete as per SI No.583 |
| 43 | Structural steel work riveted, bolted or welded in built up sections, trussesand framed work, including cutting, hoisting, fixing in position andapplying a priming coat of approved steel primer all complete. ( CPWD 10.25.1) |
| 44 | Painting over M.S.work with approved paint I/C all complete as per pwd schedule 642 |
| 45 | Providing and fixing precoated galvanised iron profile sheets (size,shape and pitch of corrugation as approved by Engineer-in-charge)0.50 mm (+ 0.05 %) total coated thickness with zinc coating 120grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 micronsepoxy primer on both side of the sheet and polyester top coat 15-18 microns. Sheet should have protective guard film of 25 micronsminimum to avoid scratches during transportation and should besupplied in single length upto 12 metre or as desired by Engineerin-charge. The sheet shall be fixed using self drilling /self tappingscrews of size (5.5x 55 mm) with EPDM seal, complete upto anypitch in horizontal/ vertical or curved surfaces, excluding the cost ofpurlins, rafters and trusses and including cutting to size and shape wherever required. dsr 12.50 Please Enable Macros to View BoQ information |
