|
| 1 | Dismantling of floor, hearth or wall tiles including cement mortar bedding but not backing and rubbish off permises all as specified. |
| 2 | M&L for joint free non skid coloured ceramic floor tiles 7 to 8 mm thick square/rectangular) (joint free) area of each tile exc 0.18 sqm but n.exc 0.38 sqm, in floor etc set & jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tiles over and including 15 mm thick screed bed in cement mortar 1:6 complete all as specified and directed. |
| 3 | M&L for joint free non skid ceramic coloured tiles 7 to 8 mm thick (square / rectangular) area of each tile exc 0.18 sqm & not exceeding 0.38 sqm as in skirting etc set & jointed in neat cement slurry and pointed with white or coloured cement to match the shade of tile over and including 10 mm thick rendering in cement mortar 1:4 complete all as specified and directed. |
| 4 | M&L 25 mm thick plain cement concrete (1:2:4), type B-0 using 12.5 mm graded stone aggregate as in floors incluring fninshing the surface rough & even for receiving Kota/tiles complete. |
| 5 | M&L for glazed ceramics coloured tiles of size 450x350x7mm thick in vertical surfaces such as skirting/dados / wall set and jointed neat cement slurry ad pointed in white or coloured cement to mathc the shade of tiles over and including 10 mm thick rendering in cement mortar complete all as specified and directed. |
| 6 | Demolition of brick work built in cement mortar including all quions, arches, pillars, etc complete. |
| 7 | M&L Brick work with sub class 'B' bricks straight or curved on plan exc 6m mean radius built in CM (1:6) all as specified |
| 8 | Same as item No 10 above but except bricks. |
| 9 | Demolition of cement concrete (unreinforced) in ground floors and paving n exc 15 cm thickness (below or above ground level) complete all as specified and directed. |
| 10 | M&L Chequred cement concrete tiles 20cm x 20cm x 25cm thick/30cmx30cmx25 mm thick set jointed and pointed with grey cement slurry mixed with pigment to match the shade of the tile over and including 20 mm thick screed bed in cement mortar 1:6 complete all as specified and directed. |
| 11 | M&L PCC 1:4:8 type D-2 (using 40mm graded stone aggregate) as in fdn, sub base, mass concrete & cinder concrete etc. complete all as specified and directed. |
| 12 | M&L for PCC 1:2:4 type B1 using 20 mm graded stone aggregate for insertion of hold fast ,coping lintels ,plinth course, cills etc, incl necessary form work complete all as specified and directed. |
| 13 | M&L machine cut cudappah stone slab flooring 20-25 mm thick over cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing over and including 20 mm thick screed bed in cement mortar 1:6 complete all as specified and directed. |
| 14 | Taking down cement plaster on wall/ceiling/roof etc including raking out joints, hacking for key scrubbing down with water etc complete all as specified and directed. |
| 15 | M&L 15 mm thick rendering on fair faces of brick /concrete surfaces in CM (1:6), finished even and smooth (without using extra cement ) complete all as specified and directed. |
| 16 | M&L for rendering 15 mm thick in cement mortar 1:4, in two layers (1st layer 10 mm thick rendering coat and 2nd layer 5 mm thick finishing coat) on brick work or concrete surfaces, second layer (finishing coat) mixed with liquid water proofing compound @ 200 ml / 50 Kg bag of cement or as per manufacturer's instructions and finished the surfaces even and fair without using extra cement complete all as specified and directed. Note : Liquid WPC will be measured and paid separately. |
| 17 | M&L 5 mm thick rendering on fair faces of brick /concrete surfaces as on ceiling in CM (1:3), finished even and smooth (without using extra cement ) complete all as specified and directed. |
| 18 | Supply only water proofing compound (liquid), ISI marked. |
| 19 | Taking down chowkats or frame with shutters of any description (without taking off shutters from the frames) n. exc 1.5 Sqm each complete all as specified and directed. |
| 20 | Same as item No 19 above but exc 1.5 Sqm but n.exc. 4 Sqm each. |
| 21 | S & F 35 mm thick 2nd class hardwood glazed and skeleton shutters, open rebated and prepared to receive glass, gauze etc (without sash bars) edges of framing plain chamfered or rounded fitted with cut and mitred beads for securing glass etc fitted to chowkhats for doors complete all as specified and directed. |
| 22 | S & F 30 mm thick flush shutters solid core construction with particle board core and plywood face panels, commercial type on both sides supplied and fitted to chowkats complete all as specified and directed. |
| 23 | S&F Steel windows with side hung shutters including projecting type hinges with steel handle, and steel peg stay, complete with glazing bars, dovetailed or welded complete all as specified and directed. |
| 24 | Sme as item No 23 above but without glazing bar |
| 25 | S&F steel ventilators with top hung shutters including hinges, steel peg stay complete. |
| 26 | S&F Mild steel framed works such as grills,gratings,etc, with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work for portions framed and hung as gates, including pintle hinges, stops, hand made sliding bolts, etc conforming to Fe 290 Gde -E-165. |
| 27 | S & F pressed steel frame of size 105 X 60 mm and 1.25 mm thick MS sheet for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plates etc complete all as specified and directed. |
| 28 | S & F pressed steel frame of size 125 X 60 mm and 1.25 mm thick MS sheet for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plates etc complete all as specified and directed. |
| 29 | S&F Mild steel works as in hold fasts, clamps, plain angle cleats for securing purlins to wood trusses or rafters, cooler stands and similar small articles conforming to Fe 410-0 or Fe 310-0 |
| 30 | S & F, Solid PVC door frame of size 50mm x47mm made out of 5mm single side prelam PVC sheet used instead of plain colour PVC sheet & edges will be painted to match with prlam sheet, reinforced with MS square tube, supplying and fixing in opening complete all as specified and directed. |
| 31 | S&F Factory Made Solid PVC Moulded Door Shutter with Particle Board Core, 28 to 30mm thick (stiles), with 2, 4, or 6 raised panel design with 2mm thick Moulded PVC Sheet on the front face & 2mm plain colour PVC sheet on back face, supplying & fixing in frame at site complete all as specified and directed. |
| 32 | S&F 100 mm size Butt hinges, extruded aluminium alloy with galvanised mild steel hinge pin, anodised and fixed, type B-21 complete all as specified and directed. |
| 33 | S&F aluminum alloy anodised sliding door bolts with hasp & staple & fixing clips of sheet cast extruded section & fixing bolts & sliding bolts of extruded section 300 mm long. |
| 34 | S&F mild steel, 150 mm long ordinary helical door spring incl roller and roller plate complete all as specified and directed. |
| 35 | S&F 200 mm long aluminum anodised barrel tower bolts of extruded section complete all as specified and directed. |
| 36 | S&F 150 mm Aluminium anodised, barrel tower bolts of extruded section and fixed complete all as specified and directed. |
| 37 | S&F 100 mm Aluminium anodised, barrel tower bolts of extruded section and fixed complete all as specified and directed. |
| 38 | S&F 150 mm extruded aluminium alloy handles, fabricated type anodised complete all as specified. |
| 39 | S&F 100 mm extruded aluminium alloy handles, fabricated type anodised complete all as specified. |
| 40 | S&F floor door stopper 140 mm overall length of cover plate of aluminium alloy body and tongue, anodised. With hard drawn spring, fixed in floor complete all as specified and directed. |
| 41 | S&F small fittings of 2nd class hard wood door, window stops and the like not exc 200 cucm each including MS butt hinges, medium weight, cold rolled 50mm long all as specified. |
| 42 | S&F GI wire cloth 0.56 mm nominal dia of wire and average width of aperture 1 mm and fixed with stainless steel wire staple complete all as specified. |
| 43 | S& F 3 mm thick sheet glass ordinary quality and glazing with oil putty in square n. exc 0.5 Sqm in each pane. |
| 44 | S & F 3 mm thick figured glass pin head type and glazing with oil putty in squares n exc 0.5 Sqm in each pane etc complete all as specified and directed. |
| 45 | S& F in repair 18/19 mm thick Prelaminatd particle board, interior grade, prelaminated one side with decorative choice lamination & other side balancing white lamination, fixed with screws to timber frame work complete all as specified and directed. |
| 46 | S&F 100 mm long hasp & staple aluminium anodised wire type, incl bolt to hinge plate and fixed with screw complete all as specified and directed. |
| 47 | S&F 100 mm dia extruded brass handle, fabricated type polished fixed to board complete all as specified and directed. |
| 48 | S&F MS Peg set of six powder coated as approved by GE |
| 49 | S&F in repair mild steel conduit curtain rod with PVC coating fancy type curtain rod 20 mm dia of any colour as approved complete all as specified and directed. |
| 50 | S&F mild steel Bracket with PVC coating fancy type for curtain rod 20 mm dia of any colour as approved complete all as specified and directed. |
| 51 | Taking up or down steel tubing and connections, including cleaning for re-fixing or removal to store of 15 mm dia. |
| 52 | Taking up or down steel tubing and connections, including cleaning for re-fixing or removal to store of 20 mm dia. |
| 53 | Supply and laying of 16 mm CPVC Pipes SDR 11 & plain CPVC SDR 11 fittings on walls /ceiling or laying in floors including union, brass elbow,brass tee, MBTA, FBTA complete all as specified. |
| 54 | Supply and laying of 20 mm CPVC Pipes SDR 11 & plain CPVC SDR 11 fittings on walls /ceiling or laying in floors including union, brass elbow,brass tee, MBTA, FBTA complete all as specified. |
| 55 | Cutting chases in brick walls, pinning in. making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelves, lintels, etc.; and cutting chases for concealed water tubing or concealed conduit wiring, etc., and making good, cutting not exc 10 cm girth complete. |
| 56 | S&F in repair chromium plated central hole basin mixer single lever without popup waste system with 450 mm long braided hoses complete all as specified and directed. |
| 57 | S&F in repair vitreous china WHB size 550x400 mm white flat back including PVC waste pipe but excluding taps, waste, chain & plug & porcelain stopper but including brackets painted with two coats of synthetic enamel painting over a coat of red oxide primer etc complete all as specified and directed. |
| 58 | S&F in repair vitreous china squating pan 'Orissa' pattern WC size 580x440 mm white with integral foot rest and trap and including connection to trap, and to flushing pipe, anti-syphonage pipe, etc. complete including making good to floor complete all as specified and directed. |
| 59 | S&F in repair 10 Ltr capacity PVC valveless shyphonic action type low level flushing cistern white with inlet, ball valve, float valve and handle incl bracket and flush pipe of low level of 32mm dia fixed to wall complete all as specified and directed. |
| 60 | S&F in repair chromium plated health foucet with 8mm dia and 1.2 m long flexible tubes and wall hook suitable for EWC including nut/washer complete all as specified and directed. |
| 61 | S&F in repair PVC connection 15mm dia size and 450 mm long with 2 Nos check nuts its washers complete all as specified and as directed. |
| 62 | S&F in repair 5 mm thick looking mirror selected quality glass exc 0.50 sqm each and fixed to wall with stainless steel flat head mirror screw cups and washers including polished , rounded off edges of glass and drilling hole in glass complete as specified and directed. |
| 63 | S&F in repair bib tap 15 mm bore, chromium plated with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule complete all as specified and directed. |
| 64 | S&F in repair 15 mm bore pillar taps cast copper alloy with capstan heads chromium plated screwed down high pressure with or without lettered 'Hot' or 'Cold' with long screwed shanks & fly-nuts screwed for iron pipe & fixed complete all as specified and directed. |
| 65 | S&F in repair CP brass tubular towel rail 20 mm dia D type 60 cm long between flanges complete all as specified and directed. |
| 66 | S&F in repair angle cock 15 mm bore fancy type chromium plated, with capstan head, high pressure, screwed down, screwed for iron pipe or for brass ferrule fixed to iron pipe complete all as specified and directed. |
| 67 | S&F in repair CP two way angle valve with wall flanges 15 mm bore, screwed down, screwed for iron pipe or for brass ferrule complete all as specified and directed. |
| 68 | S&F in repair of stainless steel soap dish, of standard size and shape complete all as specified and directed. |
| 69 | S&F sinks without drainge board made of stainless steel 1mm thick kitchen or laboratory with plugs, washers and wastes; & pvc waste pipe including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe overall size 495 mm x 420 mm bowl size 410 mm x 330 mm x 160 mm complete all as specified and directed. |
| 70 | S&F in repair 0.63 mm thick kitchen plate rack made of stainless steel 900 x 750 x 220 mm size fixing with wooden plug with suitable size of screws complete all as specified. |
| 71 | S&F in repair chromium plated overhead shower rose swivel type 125 mm with CP arms 300 mm long complete all as specified and directed. |
| 72 | S&F PVC (SWR) 'P' or 'S' trap for 110 mm dia etc complete all as specified and directed. |
| 73 | S&F in repair chromium plated toilet paper holder with flap complete all as specified and directed. |
| 74 | M&L for RCC as in kitchen platform, shelves & chajjas etc 1:2:4 type B1 (using 20 mm graded stone aggregate) including necessary form work complete all as specified and directed. |
| 75 | S&F MS TMT bar 8 dia & over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire not less than 0.90mm dia or securing with clips. |
| 76 | Taking down AC/PVC pipes (including all fittings), with spigot and socket ends and lead joints including burning out joints of 100 mm dia pipe. |
| 77 | S&F PVC (SWR) pipes 110mm bore single socketed in any length with rubber ring joints laid in floors, trenches complete. |
| 78 | S&F PVC (SWR) pipes 110mm bore single socketed in any length with rubber ring joints fixed to wall complete. |
| 79 | S&F PVC (SWR) pipes 75mm bore single socketed in any length with rubber ring joints laid in floors, trenches complete. |
| 80 | S&F clamp made out of 50x5 mm flat iron, 16mm dia round iron stays including bolts & nuts and securing ends of stays to wall or roof for 110mm PVC pipe complete all as specified and directed. |
| 81 | M/L PVC (SWR) bend of 110mm dia of any radius etc complete all as specified and directed. |
| 82 | S&F PVC (SWR) bends any radius provided with access door of 110 mm dia. |
| 83 | M/L PVC(SWR) Tee of 110mm dia etc complete all as specified and directed. |
| 84 | S&F PVC (SWR) bends any radius provided with access door of 75 mm dia |
| 85 | S&F PVC (SWR) branch pieces, single (equal or un equal) , ordinary or inverted (spigot or socket type) or with parralled branches of 110 mm dia with access door |
| 86 | Same as item No 85 above but 75 mm bore |
| 87 | S&F PVC (SWR) vent cowl 110mm bore |
| 88 | S&F PVC (SWR) nahani/ floor trap, plain with grating with or without waste hole including jointing with solvent cement 75mm dia etc complete all as specified and directed. |
| 89 | Dismantling water tanks and removing to store of capacity exc 500 and n exc 1000 ltrs complete all as specified and directed. |
| 90 | S/F in repair rotational moulded polyethylene water storage tank of capacity 500 litrs (Cylindrical vertical with closed top) hoisted and fixed on position complete all as specified and directed. |
| 91 | S&F Ball valves 20mm dia high pressure of PTMT with epoxy coated Aluminium rod & high density plastic ball screwed for iron pipe and fixed. (Minimum weight 20mm-210gms) complete all as specified and directed. |
| 92 | S&F in repairs Gun metal, globe or gate valve with iron wheel head, 20 mm bore, screwed both ends for iron pipe complete all as specified and directed. |
| 93 | M&L for preparation of new wooden surfaces of any description, not otherwise described, over 10 cm width or girth and applying two coats of synthetic enamel paint (Ordinary tint) over a coat of pink primer complete all as specified and directed. |
| 94 | M & L for preparation of new steel surfaces any description over 10 cm width or girth and applying two coat of synthetic enamel paint over a coat of red-oxide primer complete all as specified and directed. |
| 95 | M&L for applying 2mm thick Birla / JK Putty in two layers on old wall surfaces including complete removal of existing wall finish of any type with wire brush, brooming, dusting and finally washing with water to clean the surface absolutely free from any kind of foreign materials and making good minor cracks etc. and surfaces absolutely even and smooth, rubbing with sand paper complete. |
| 96 | M & L for preparation of newly plastered surfaces of wall & concrete and applying 2mm thick wall care putty including preparation complete. |
| 97 | M&L for applying two coats of oil bound distemper on wall or concrete over a coat of primer on prepared surfaces including, rubbing with sand paper complete on newly plastered surface. |
| 98 | M&L for applying 2mm thick Birla / JK Putty in two layers on old ceiling surfaces including complete removal of existing wall finish of any type with wire brush, brooming, dusting and finally washing with water to clean the surface absolutely free from any kind of foreign materials and making good minor cracks etc. and surfaces absolutely even and smooth, rubbing with sand paper complete. |
| 99 | M & L for preparation of newly plastered surfaces of ceiling and applying 2mm thick wall care putty including preparation of new surface complete. |
| 100 | M&L for applying two coats of oil bound distemper on ceiling over a coat of primer on prepared surfaces including, rubbing with sand paper complete all as specified and directed. |
| 101 | M&L for preparation of old decorated surfaces of walls by washing, rubbing down and scrapping of distemper surfaces and applying two coat of Oil Bound Distemper of any light shade complete all as specified and directed. |
| 102 | M&L for preparation of old decorated plastered or unplastered surfaces of wall by brooming down or steel wire brushing, scrapping down smoke soot, moulds, moss and efflorescent salts and trading oil and greasy spots and applying two coat of white wash complete. |
| 103 | M&L preparation of new plastered or unplastered surfaces of wall and applying two coats of cement based paint over a coat of primer complete all as specified and directed. |
| 104 | M&L Preparing old painted surfaces of walls, chajjas etc by washing rubbing down and stopping and applying two coat of cement base paint white or tinted complete all as specified as directed. |
| 105 | Preparing surface of sunken slab and applying 15 mm thick cement plaster 1:4 cement sand mortar with integral water proofing compound both on floor and wall. The surface shall then be cured and allowed to dry then applying Epoxy Resin coating polymer modified cementitious coating like brush bond of Fosroc, Pidilite and Bostic as per manufacturer's instructions both on floor as well as on wall and sunken floor shall be filled with graded cinder complete all as specified. Note: LWPC will be measured and paid separately. |
| 106 | Roughing of old surface of concrete by picking sweeping, cleaning & washing down with water to remove dust etc complete. |
| 107 | M&L brushing neat cement slurry with 3 Kg of cement per square meter complete all as specified and directed. |
| 108 | M&L for PCC 1:2:4 type B0 (Using 12.50 mm graded stone aggregate) in roof padding/kerbs/sunken slab etc complete all as specified and directed. |
| 109 | M&L for 10mm rendering on roof surfaces/ concrete surface in CM 1:4 complete all as specified and directed. |
| 110 | M&L for water proofing treatment on \\"non approachable/non accessible and approachable roof surface (horizontal & vertical surface) in following sequence through manufacturer/ authorized applicator of the manufacturer including taking down of existing roof treatment, properly cleaning & drying the concrete surfaces complete. |
| 111 | Applying a coat of oxidised bitumen based solvent primer @ 0.3 Kg/Sqm |
| 112 | Applying evenly a tack coat of industrial bitumen 85/25 grade @ 1.2 Kg/Sqm incl cleaning surface. |
| 113 | Laying unrolled over the bitumen coated surface, polymeric water proofing membrane hyperplas standard wt not less than 3Kg/ Sqm with 100mm over laps shall be sealed by frame as per manufacturers instruction |
| 114 | Applying two coats of bituminous aluminium paint including preparation complete. |
| 115 | M&L for two coats of elastomeric cementatious coating pidifin 2k of pidilite or equivalent in fosroc, sika, STP on exposed brick surface after complete removal of old plaster surface complete all as manufacturer instructions and as directed. |
| 116 | Taking down carefully copper/aluminium point wiring (Light,fan,socket are power) complete fitting such as switches, ceiling rose, regulator, sockets etc. removing materials to store for keeping in safe custody or for taking credit (credit for above items should be made as per conditions separately) and making good disturbed surfaces of wall, floors, etc. all as specified and directed. |
| 117 | M&L for point wiring complete with PVC insulated unsheathed, 1100 volts grade cable 1.5 Sqmm (nominal area) FRLS type multi stranded copper conductor, single core drawn in and including not less than 20 mm dia rigid PVC conduit 'medium grade' ISI marked including all conduit accessories for concealed wiring for one light/fan/call bell / exhaust fan point controlled by one, one way switch, including concealed pressed steel terminal box of required size not less than 1.0 mm thick factory made duly painted inside & outside with two coats of black bituminous paint over & including a coat of red oxide primer, with 2.8 mm thick top cover of plastic laminated sheet of required colour for mounting switch, sockets, fan regulator etc including 1.5 Sqmm FRLS type PVC insulated unsheathed cable multi-stranded copper conductor as continuous earth wire and connected to earth dolly as required at site& including chases cutting & making good disturbed surface & applying finishes to match existing surface complete all as specified and directed. |
| 118 | Same as item No 113 above but one 3/5 pin socket out let 5 amp on same board with other switches. |
| 119 | Same as item No 113 above but socket 5 amp on independent board. |
| 120 | Same as item No 113 above but One bell/ buzzer point controlled by one push button on the same board with other switches or independent with cables 1.5 sqmm size |
| 121 | Same as item No 113 above but one light point controlled by two two way switches. |
| 122 | Same as item No 113 above but socket out let 3/6 pin 15 Amp with 2.5 sqmm size copper conductor for power point on indipendent board. |
| 123 | S & F for switch piano, flush type, 5 amps, single pole , one way , 230 volt complete all as specified and directed. |
| 124 | Supply & Fixing switch bell push flush type 5 Amps, one way, 230 volt complete all as specified and directed. |
| 125 | Supply & Fixing switch piano flush type two way 5 Amp. |
| 126 | S & F for 2/3 pin, 5 Amp/ 6 Amp , socket outlet, flush type, 2 in 1 complete all as specified and directed. |
| 127 | S&F switch socket combination 2 in 1, 6 pin 16 Amps multipurpose type 240 volts complete all as specified and directed. |
| 128 | Supply & Fixing ceiling rose surface backlite 65X20 mm two to three terminals complete. |
| 129 | Supply & Fixing lamp holder PVC / Ploycarbonate type with back plate suitable for batten fittings complete all as specified and directed. |
| 130 | S&F stepped type electronic fan regulator flush type AC 230 volt suitable for any type of ceiling fan complete all as specified and directed. |
| 131 | S&F bell ding dong, AC 230 volt complete all as specified and directed. |
| 132 | M & L for power/sub main wiring with two runs of single core 6 sqmm size and one run of single core 6.0 sqmm (green colour as earth continuty conductor ) PVC insulated unsheathed multi stranded copper conductor cables drawn through and including rigid PVC concealed conduit complete all as specified and directed.( Note - Two runs of 6 sq mm single core copper conductor and one runs of 6.0 Sq mm copper conductor shall be measured as one unit length.) |
| 133 | Supply & Fixing sheet metal enclouser MCB DB double door bus bar neutral link,earth bar and din rail SPN 8 way. |
| 134 | Supply & Fixing MCB SPN 32 Amps 240 volts, 10 KA, \\"C\\" curve. |
| 135 | Supply & Fixing MCB SP 5 to 32 Amps 240 volts, 10 KA, \\"C\\" curve. |
| 136 | Supply & Fixing in replacement LED lamps 9 W .Make Havells/Bajaj /Crompton. |
| 137 | Taking down existing light fitting of any type,make & capacity . |
| 138 | Supply and fixing LED lights fitting 1x 20W, 220V,AC integrated type including driver, Extruded aluminum housing (enhances safety) with high quality polycarbonate diffuser , 4 ft,2000lm,voltage protection range 140V -270 V,NW 4000K , ,connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete all as specified and directed. |
| 139 | Same as item No 134 above but of 10 W 2 feet. |
| 140 | Supply and fixing integral LED light fitting, 15 W, 230 Volts, decorative surface mounted round / Square shaped (down lighter) , complete with all accessories pre wired and including connecting up with twin core twisted flexible copper conductor of suitable size. |
| 141 | Supply and fixing integral LED bulkhead luminaire, 10 W, 230 Volts, IP 65 protection decorative surface mounted, complete with all accessories pre wired and including connecting up with twin core twisted flexible copper conductor of suitable size. |
| 142 | Supply & fix exhaust fans heavy duty complete steel body and copper winding fan motor,1400 rpm ,AC single phase 230/ 240 V, 50 Hz AC, of size 300 mm sweep with louver including breaking necessary hole in wall for fixing the exhaust fan and making good to disturbed surfaces with cement mortar to match with existing after commissioning. |
| 143 | Supply and fixing ceiling fans complete with blades, down rods, electronic regulator and accessories, 230 V, 1200 mm sweep. Min air delivery 210 CFM with service value 6.00 BEE. Five star rated with brushless direct current motor(BLDC) complete all as specified and directed. |
| 144 | M&L earthing complete with galvanised steel earth plate 600X600X6 mm thick buried directly in ground (earth pit not les than 2.25 M deep below GL with top edge of plate not less than 1.5 m below GL) connected with GI earth wire 4 mm dia as earthing leads by means of bolts, nuts, check nuts and washers properly jointed as shown on drawings and including excavation, earth work. GI pipe light grade 15 mm bore for protection of GI earth wire from earth electrode to and including the earth test point, supplying and laying charcoal dust, common salt PCC (1:2:4) type B1chamber and MS angle iron frame of 40mmx40mm x3 mmand RCC cover 40 mm thick (1:2:4) type B1 using 20 mm graded stone aggregate reinforced with 8 mm dia TMT bars @ 75 mm C/C both ways with MS handle 12 mm dia, PGI funnel and wire mesh, 20 mm dia GI pipe light grade for watering all as shown in electrical plate No 3 of SSR Part -I and conected to earth test point including testing complete all as secified and directed. Please Enable Macros to View BoQ information |
