|
| 1 | Demolition of un-reinforced Cement Concrete of any description and in any position not otherwise specifically provided for complete all as specified and directed. |
| 2 | M &L for 25 mm thick PCC 1:4:8 type D2 (Using 12.5 mm graded stone aggregate) as in sub base in floors complete all as specified and directed. |
| 3 | M&L screed bed or bedding layer of morter 15 mm thick cement plaster 1:6 for laying floor finished to receive floor tiles/granite complete all as specified and directed. |
| 4 | M & L for Virified Ceramic tiles 10 mm thick (square/ rectangular) polished, area of each tiles not exceeding 0.36 sqm, in loors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match complete all as specified and directed. |
| 5 | M & L for Non - skid coloured Ceramic tiles 7 to 8 mm thick area of each tile exceeding 0.06 sqm but not exceeding 0.11 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match complete all as specified and directed. |
| 6 | M&L for 75 mm thick cement concrete type D-2 (1:4:8) using 40 mm graded stone aggregate as in sub base under Chequered tiles complete all as specified and as directed. |
| 7 | M&L for chequered cement concrete tiles 20 cm by 20 cm by 25 mm thick with grey cement and pigments, set, jointed and pointed in neat cement slurry in floors complete all as specified and as directed. |
| 8 | M&L PCC (1:3:6) type C-2 using 40mm graded stone agg 75mm thick as in plinth protection finished even and fair without using extra cement complete all as specified and as directed. |
| 9 | Dismantling floor, hearth or wall tiling including cement mortar bedding but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specified and directed. |
| 10 | M & L for glazed ceramic coloured tiles in vertical surface such as skirting, dados and rises to steps etc 350x 250x 7 mm/ 450X 350X 7mm thick over 10mm thick cement morter in CM 1:6, set and jointed in neat cement slurry and pointed in white or colour cement to match the surface of tile complete all as specified and directed. |
| 11 | Dismantling wall and ceiling boards (fibre, pulp, insulation etc.) any thickness, including cover fillets complete all as specified and directed. |
| 12 | Dismantling Unframed timber scantlings 40 Sq. cm and over in section complete all as specified and directed. |
| 13 | M&L 2nd class hard wood in scantling timber framed work fixed clean sawn complete all as specified and directed. |
| 14 | M & L 4 mm thick Veneered decorative Ply wood, grade 1 with BWR resin with decorative face veneers on one face fixed with screws to timber frame work in ceiling complete all as specified and directed. |
| 15 | M&L for 9mm thick Veneered decorative plywood, grade 1 (with BWR resin) with decorative face veneers on only one face has decorative veneer fixed to timber frame work complete all as specified and directed. |
| 16 | Dismantling Unframed timber scantlings under 40 Sq. cm and over in section infillets,rails,posts,rafters,purlins complete all as specified and directed. |
| 17 | S & F 2nd class hard wood plain fillets,wrought square rectangular in section complete all as specified and directed. |
| 18 | Dismantling plain or corrugated steel sheeting any gauge, thickness, including Naintal or similar pattern roof coverings complete all as specified and directed. |
| 19 | S&F Pre- painted galvatume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified. |
| 20 | S&F Pre- painted galvatume aluminum zinc coating GI based plain sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified. |
| 21 | Ditto as per 19 above but except sheeting covering/ cladding to wall fixed with self tapping screw as specified. |
| 22 | Taking down chowkat or frames exc 1.5 sqm but n. exc 4 sqm each (w/o taking of shutters from the frame ) complete all as specified |
| 23 | S and F Steel windows for industrial buildings, fixed type, with glazing bars complete all as specified |
| 24 | M&L for preparation of new painted steel surfaces of any description, not otherwise described, over 10cm width or girth and applying two coat of synthetic enamel paint over red oxide zinc chrome priming complete all as specified and directed. |
| 25 | M & L for preparation of old painted steel surfaces of any description, not otherwise described, over 10cm width or girth and applying one coat of synthetic enamel paint (first quality) complete all as specified and directed. |
| 26 | S & F 35 mm thick second class hard wood, plain framed , panelled shutters (any number of panels), with panels of timber flat on both sides (feather edged), or of veneered particle board medium density, wood particle board with commercial face veneers supplied and fixed to chowkhats. complete all as specified |
| 27 | Preparation of New or previously untreated wood and wood based surfaces of any description, not otherwise described, over 10 cm width or girth and applying two coats of Synthetic enamel paint (Ordinary tint) over a coat of Pink primer. complete all as specified |
| 28 | Hacking out old broken glass (any thickness, size quality or description) from wooden frames or stone, concrete or brick surrounds glazed with putty or fixed with beads complete all as specified & directed. |
| 29 | M&L for 6.3 mm thick sheet glass ordinary quality and glazing with oil putty in square n-exc 0.5 sqm in each pane complete all as specified & directed. |
| 30 | S and F Mild steel barrel tower bolts, 150 mm long stove enamelled black, with bright bolt and fixed complete all as specified. |
| 31 | S & F in repairs of floor door stopper of aluminium alloy body and tongue, anodised, with hard drawn steel spring, fixed in floor with overall length of vover plate 140 mm complete all as specified. |
| 32 | S and F 300mm long Mild steel sliding door bolts, plate type, stove enamelled black, with bright bolt not less than 12mm dia with and including a minimum of 6 bolts and nuts, four on bolt plate and fixed complete all as specified. |
| 33 | S and F 125 mm long MS Butt hinges medium weight, cold rolled mild steel, and fixed complete all as specified. |
| 34 | S & F 125 mm long Extruded Aluminium alloy handles, fabricated type, anodised in repairs complete all as specified. |
| 35 | M & L for Door closer hydraulically regulated, Aluminium body section designation No. 3, universal type, suitable for door shutters of 851 to 1000 mm in width and of weight between 61 to 80 kg and fixed complete all as specified and directed. |
| 36 | S and F in repair 300mm, ordinary rat tail rod pattern springs including roller and roller plate complete all as specified and directed. |
| 37 | Demolition of precast concrete block walling built in cement morter complete all as directed. |
| 38 | M&L for precast cement concrete block masonary walling type C-I 1:3:6 using 20mm graded aggregate with solid blocks, exc. 10 cm in width and setting in CM 1:6 complete all as specified and directed. |
| 39 | M/L for PCC 1:2:4 type B1, using 20mm graded stone aggregated as in plinth band, lintel band, roof band , lintel bands ,copings and other similar bands etc Complete all as specified and directed. |
| 40 | Taking down cement plaster on brick or stone walls, etc. including raking out joints, hacking for key, scrubbing down with water, etc complete all as specified and directed. |
| 41 | M&L for rendering 10 mm thick on fair faces of brick work or concrete surafces in CM 1:4 complete all as specified and directed. |
| 42 | M & L for preparation of surfaces of new plaster surface of wall and applying two coats of oil emulsion distemper over a coat of chalk whiting , on plastered surfaces, preparatory to distempering complete all as specified and directed. |
| 43 | M & L for rendering 15mm thick in cement plaster 1:4 on stone masonry surfaces or surface other than fair face of brickwork or on one side of lathing finishing even and smooth without using extra cement complete all as specified and directed. |
| 44 | M & L for preparation of new plastered surface of wall and applying two coats of cement base paint over a coat of alkali resistant priming paint complete all as specified and directed. |
| 45 | S & F in repairs for Health faucet (ABS Body) mild steel chromium plated suitable for 15 mm dia pipe with 1.25 metre long flexible tube and ABS wall hook including making connections and fixed in position complete in all respect as specified. |
| 46 | S & F in repairs White toilet paper holder, vitreous china box type fixed to wall with chromium plated brass screws,complete all as specified and directed. |
| 47 | S & F in repairs PVC valveless, syphonic action type, flushing cistern of 10 ltrs capacity, high or low level, white, with inlet, ball valve, float and handle including brackets, and connections to flush pipes of polyethylene of low or high density or PVC. 32 mm dia, for low level cistern complete all as specified and directed. |
| 48 | S&F in repairs for Wash basins, Vitreous China (flat back or angle back type) size 580X450mm, including cutting for and pinning in ends of brackets or erecting stand but exclusive of fixing of supply and waste pipe , complete all as specified and as directed. |
| 49 | S&F in repairs mirror glass of size 0.60X0.450m bevelled edge mirror of selected quality glass mounted on 6mm thick AC building board or commercial plywood and fixed to wooden plugs with cromium plated brass screw and cup washer etc complete all as specified and as directed. |
| 50 | S & F in repairs 20 mm dia Aluminium anodised tubular towel rail, D type,one pair of fixing brackets , 60cm long between flanges complete all as specified and directed. |
| 51 | S & F in repairs Soap dish, any type, fixed to plugs with chromium plated brass screws Soap dish, vitreous China white, ap proximate size 160x 160x90 all as specified and directed. |
| 52 | S & F in repairs Sheet glass shelf assembly consisting of 5.5mm thick sheet glass shelf 12cm wide with chromium plated bracket guard and railing 60cm long all as specified and directed. |
| 53 | S& F chromium plated shower roses with or without swivel joints, any size including fixing to steel pipe or union completed all as specified and as directed. |
| 54 | Demolition of reinforced cement concrete cover slab for MH/Spetic tank and removing the debris to a distance not exc 500 M as directed. |
| 55 | M & L precast cement concrete 1:2:4 type B1 using 20 mm graded stone aggregate for cover slab for Man holes/Septic tank set in CM 1:4 complete all as specified and directed. |
| 56 | M&L for mild steel deformed bars or TMT bars10mm dia, cut to length, bent to shape required including cranking bending spirally & binding with and in including mild steel wire (annealed) not less than 0.9mm dia complete all as specified and directed. |
| 57 | M&L for mild steel deformed bars or TMT bars 6mm to 8mm dia, cut to length, bent to shape required including cranking bending spirally & binding with and in including mild steel wire (annealed) not less than 0.9mm dia complete all as specified and directed. |
| 58 | M&L for harrison rails of anodised aliminium alloy with fixing brackets stops rollers etc complete all as specified and as directed. |
| 59 | S&F in repair brass CP Stop cock/ Angle cock 15 mm fancy type choromium platedetc, complete all as specified and as directed. |
| 60 | S&F in repairs PVC connection 15mm size with PTMT nuts of length 450mm complete all as specified and as directed. |
| 61 | S&F in repairs pillar taps 15mm dia cast copper alloy capstan heads, chromium plated, screwed down high pressure with or without lettered HOT or COLD with long screwed shank and fly nuts screwed for iron pipe and fixed bore of pipe 15mm complete all as specified and direrected. |
| 62 | S&F in repair brass CP mixer, 15mm bore ,for mixing hot & cold water screw down for iron pipe , complete all as specified and as directed. |
| 63 | S&F in repairs bib taps cast copper alloy , choromium plated ,with crutch or butter fly handle screwed down screwed for iron pipe etc complete 15mm dia complete all as specified and as directed. |
| 64 | S&F PVC waste pipe 40mm bore with cup and washers complete on new or old locations complete all as specified and directed. |
| 65 | S&F in repair C.P. grating 100mm square/round with or without hole, complete,all as specified and directed. |
| 66 | S&F in repairs of UPVC floor trap, plain with grating, diameter of outlet in 75mm including jointing to waste pipe fixed with solvent cement complete all as specified and directed. |
| 67 | S & F Vitreous china premium/ 1st quality wash down water closet wall hung EWC white/ ivory/ off white( closed pattern incl all necessary accessories like rag bolts/ gel gasket, jet spray etc (excluding flushing cistern and flush pipe) complete in all respect all as specified. |
| 68 | S & F for plastic water closet seat cover, black, closed pattern with flat bottom and cover and mild steel chromium plated or aluminised hinging deviced complete all as specified and directed. |
| 69 | Dismantling water tanks of capacity exc 250 & n exc 500 litres and removing to all store as specified and directed. |
| 70 | S & F 500 Ltr capacity Rotational moulded polye thylene water storage tanks (cylindrical vertical with closed top) hoisted and fixed in position all as specified. |
| 71 | S & F in repair 20mm bore of pipe PP-R Ball valves (brass insert) as per requirement of the site, complete, all as as specified and directed. |
| 72 | S & F in repair 20mm bore of pipe PP-R Gate valves (brass insert) as per requirement of the site, complete, all as as specified and directed. |
| 73 | Taking up or down 15 mm steel tubing and connections, including cleaning for re fixing or removal to store all as specified and directed. |
| 74 | Taking up or down 20 mm steel tubing and connections, including cleaning for re fixing or removal to store all as specified and directed. |
| 75 | S&F 16mm bore of pipes in 3- layer PP-R Polypropylene random copo lymer) conceal ed pipes SDR 7.4 (PN16) UV stabi lized and antimi crobial fusion welded having thermal stability for hot & cold water supply all PP-R plain & brass threaded polypropylene random fittings laid in trenches complete all as specified. |
| 76 | S&F 20mm bore of pipes in 3- layer PP-R Polypropylene random copo lymer) conceal ed pipes SDR 7.4 (PN16) UV stabi lized and antimi crobial fusion welded having thermal stability for hot & cold water supply all PP-R plain & brass threaded polypropylene random fittings laid in trenches complete all as specified. |
| 77 | Dismantling of cast iron ,PVC or reinforced concrete pipes 110 mm/ 75mm dia bore jointed in cement mortar and taking out of trenches if reqd of any dia complete all as specified and directed. |
| 78 | S & F 75mm dia bore PVC (SWR) pipes single socketed , in any length with rubber ring joints , laid in tenches or in floors, complete all as specified and directed. |
| 79 | S & F 110 mm dia bore PVC (SWR) pipes single socketed , in any length with rubber ring joints , laid in tenches or in floors, complete all as specified and directed. |
| 80 | S & F 75 mm dia bore PVC (SWR) bends any radius, complete all as specified and directed. |
| 81 | S & F 110 mm dia bore PVC (SWR) bends any radius, complete all as specified and directed. |
| 82 | S & F 110 mm dia bore PVC (SWR) junction single 'T' equal or unequal fitting, complete all as specified and directed. |
| 83 | S & F 75 mm dia bore PVC (SWR) junction single 'T' equal or unequal fitting, complete all as specified and directed. |
| 84 | S & F 110 mm dia bore PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to walls complete all as specified and directed. |
| 85 | S & F 75 mm dia bore PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to walls complete all as specified and directed. |
| 86 | Taking down Chowkats or frames not exceeding 1.5 Sq. M each (Without taking off shutters from the frames) complete all as specified. |
| 87 | S & F Second class hard wood plain, solid, straight chowkats and frames, wrought, framed, rebated on the solid, rounded or chamfered, put together with glue pinned at joints. complete all as specified. |
| 88 | M&L for cutting through brick walls for door,windows and other opening or enlarging existing opening converting window into door opening etc or cutting out defective bricks work for under-pinning, including providing fixing and removing shoring cleaning stacking ricks removing surplus serviceable bricks hardcore etc store and rubbish not exc 50m complete all as specified. |
| 89 | Anodised aluminium window and ventilator shutter side hung type without sash bars aluminium sections weighing .55kg/m including necessary joining cleats,glazing clips rubber packing anodised aluminium snap beading screw anodised aluminium fitting such as peg stays 150mm long (1 nos) hunges type b-21 100mm long (2 nos) suitable (1 nos) complete all as specified. |
| 90 | M&L for sheet glass 5.5mm thick ordinary and glazing with oil putty in square n.exc .5 sqm in each pane ordinary if sheet glass is ground or obscured or frosted on one side complete all as specified. |
| 91 | taking down copper/aluminium point wiring (light, fan, socket or power) complete, including fixture and fittings such as switches, ceiling roses, , pendents, regulators sockets, light fittings , holder, bell push, ding dong etc. removing materials to store for keeping in safe custody or for taking credit ( credit for above items should be made as per conditions separately ) and making good disturbed suefaces of walls, floor etc. complete all as specified and directed. |
| 92 | M&L for point wiring using approved colour coding as per IS with using 1.5 Sqmm multistranded,1100 volt grade copper conductor cable of PVC insulated and unsheathed type alongwith 1.5 Sqmm PVC insulated FRLSH stranded copper conductor cable for continuous earthing in & incl PVC casing & capping with accessories having ISI mark fixed on wall surfaces / ceiling including provision of 2 mm thick sheet metal modular terminal box with 3 mm thick hylam laminated sheet on top for fixing modular switches sockets etc. all as specified for one light point/ fan Bell point controlled by one switch complete all as specified and directed by Engineer-in-Charge. |
| 93 | All as per Srl item No 92 here-in-before but controlled with one 3 pin socket outlet 5 Amp, independent board with other switches with cable 1.5 Sqmm complete all as per specified and directed by Engineer-in-Charge. |
| 94 | All as per srl item no 92 here-in-before but controlled with one 3 pin socket 5 Amp on the same board with other switches with cables 1.5 Sqmm complete all as specified and directed by Engineer-in-Charge. |
| 95 | All as per srl item no 92 here-in-before but controlled with one 3 pin socket 15 Amp on the independent board with other switches with cables 2.5 Sqmm complete all as specified and directed by Engineer-in-Charge. |
| 96 | Supply and fixing of modular socket 6A-2/3 pin combined 2 module outlet 5 Amp, 230 Volt, flush button single pole one way complete all as specified and directed by Engineer -in-Charge, |
| 97 | Supply and fixing of modular switch1 way 6 Amp 1 module , 230 Volt,single pole one way complete all as specified and directed by Engineer -in-Charge, Make :ANCHOR or equivalent. |
| 98 | Supply and fixing modular switch 1 way 16 Amp ,1 module 230 Volts single pole one way complete all as specified and directed by Engineer-in-Charge. |
| 99 | Supply and fixing modular socket 6A/16A - 2/3 pin combined 2 module 230 Volts flush type complete all as specified and directed by Engineer-in-Charge. |
| 100 | Supply and fixing modular white plate cover with frame 2 module complete all as specified and directed by Engineer-in-Charge. |
| 101 | Supply and fixing modular white plate cover with frame 4 module complete all as specified and directed by Engineer-in-Charge. |
| 102 | Supply and fixing modular white plate cover with frame 6 module complete all as specified and directed by Engineer-in-Charge. |
| 103 | M&L Ceiling rose, 3 terminal with ISI mark all as specified and directed by Engr-In-Charge. Make :ANCHOR or equivalent. |
| 104 | S/F in replacement LED integrated batten tube light fittings 20W 4 Feet long warm colour temperature 3500-4100 K complete with twin core twisted flexible copper conductor cable complete all as specfied and directed. |
| 105 | S/F in replacement LED integrated batten tube light fittings 10W 2 Feet long warm colour temperature 3500-4100 K complete with twin core twisted flexible copper conductor cable complete all as specfied and directed. |
| 106 | Supply and fixing LED Lamp 12 Watt in lamp (bulb warm ) holder complete all as specified and directed. |
| 107 | Supply and fix Bajaj LED Bulk head light fittings, 10 W cool white, color temperature 3500-4100K wall mounting type complete all as specifed and directed of equavalent make : CG/Philips/wipro etc. |
| 108 | Supply and fixing in replacement of sheet metal enclosure double door for DBs single pole and neutral for 8 way 240 volt complete all as specified and direct by Engineer-in-Charge . |
| 109 | Supply and fixing in replacement of isolator SPN 40 AMP rating 240V, 10KA 'C' curve in the DB complete with connection testing and commissioning all ass directed by Engineer in Charge. |
| 110 | Supply and fixing in replacement of 240V, 10 KA 'B' curve miniature circuit breaker (MCB) of single poles and current carrying capacity 6 to 32 AMP, in the MCB DB Complete with connection testing and commissioning. |
| 111 | M & L in replacement for earthing complete with galvanised steel earth plate electrode 600x600x6.0 mm thicj\k buried directly in ground ( earth pit not less than 2.25 metres deep below ground level) with top edge of the plate not less than 1.5 metres below normal ground level, connected to galvanised iron wire of 4.0 mm dia as earth continuty conductor by means of bolts, nuts check nuts and washers of galvanised iron or steel all as shown in electrical plate No 3 of SSR-I 2010, connected to main switch board all as specified and including testing on completion , necessary excation, earthwork, PCC works ans CI earth pit cover with watering pipe 20 mm dia GI pipe medium grade , funeels with wire mesh and lugs GI pipe of 15 mm dia of light grade for protection of earth wire upto 7.5 mtrs complete all as specified and directed by Engineer-in-Charge. Note:- On testing after completion if the desired resistance is not obtained the earthing shall be re- done aat no extra cost. |
| 112 | Supply and fixing in replacement of 1100 Volts grade heavy duty cable PVC insulated aluminium stranded conductor served with inner sheathing of PVC tape and overall PVC sheathed in service connection suspended by insulating hangers not more than 1 meter apart including 4mm suspension wire one twin core cable flat or circular of size 10 Sqmm complete all as specified. |
| 113 | Supply and fix exhaust fan, Steel body body AC single Phase. 230V of size 200 mm sweep with, blades, and frame and louvers all as per specified and directed by Engieer-in - Charge . |
| 114 | Supply and fix electric water heater, storage type steel body and heating element upto 2 KW capacity 25 litre, BEE 5 Star rated complete with all accessories such as safety valve, thermostate, NRV, connection piece etc. |
| 115 | Schedule of Credit Please Enable Macros to View BoQ information |
