|
| 1 | Demolition of un-reinforced Cement Concrete of any description and in any position not otherwise specifically provided for. |
| 2 | M &L for 25 mm thick PCC 1:2:4 type BO (Using 12.5 mm graded stone aggregate) as in sub base in floors complete all as specified and directed by Engr-in-charge |
| 3 | M&L screed bed or bedding layer of morter 15 mm thick cement plaster 1:6 for laying floor finished to receive floor tiles/granite complete all as specified and directed . |
| 4 | M & L for Non - skid coloured Ceramic tiles 7 to 8 mm thick area of each tile exceeding 0.18 sqm but not exceeding 0.38 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match complete all as specified and directed . |
| 5 | M & L for Non - skid coloured Ceramic tiles 7 to 8 mm thick area of each tile exceeding 0.06 sqm but not exceeding 0.11 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match complete all as specified and directed . |
| 6 | Dismantling floor, hearth or wall tiling including cement mortar bedding but not backing), removing serviceable tiles to store and rubbish off the premises |
| 7 | M & L for glazed ceramic coloured tiles in vertical surface such as skirting, dados and rises to steps etc 350x 250x 7 mm/ 450X 350X 7mm thick over 10mm thick cement morter in CM 1:6, set and jointed in neat cement slurry and pointed in white or colour cement to match the surface of tile complete all as specified and directed. |
| 8 | M&L PCC (1:3:6) type C-2 using 40mm graded stone agg 75mm thick as in plinth protection finished even and fair without using extra cement complete all as specified and directed . |
| 9 | M&L for 75 mm thick cement concrete type D-2 (1:4:8) using 40 mm graded stone aggregate as in sub base under Chequered tiles. |
| 10 | M&L for chequered cement concrete tiles 20 cm by 20 cm by 25 mm thick with grey cement and pigments, set, jointed and pointed in neat cement slurry in floors complete all as specified and as directed. |
| 11 | Dismantling plain or corrugated steel sheeting any gauge, thickness, including Naintal or similar pattern roof coverings complete all as specified and directed . |
| 12 | S&F Pre- painted galvatume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified complete all as specified and directed . |
| 13 | Ditto as item No 12 above but except sheeting covering/cladding to wall, fixed with self tapping screws complete all as specified and directed by Engr in Charge. |
| 14 | S&F Fibre glass reinforced translucent corrugated sheeting with two corrugations side lap fixed with coach screw and washer in roof, wall etc complete all as specified and directed . |
| 15 | S&F Pre- painted galvatume aluminum zinc coating GI based plain sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified |
| 16 | Dismantling structural steel work in cluding doors, gates but excluding framed truss etc complete all as specified and directed. |
| 17 | M&L Roof trusses (framed),trussed,purlins,crane gantries,rails and fastenings and heavy bracket framing (Beam, tee, angle, channel or flat sections) including Fe 410-W (Gde E- 250) quality A complete all as specified . |
| 18 | S&F Framed work as in doors or gates of angle or other section with gusset plates, rails,braces, etc., complete, drilled for fixing of steel sheeting or other covering. Doors, etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails and guides) and hanging; also fastening and fixing Fe 410 (Gde-E- 250) quality-A) complete |
| 19 | S&F 1.25mm thick mild steel, plain, black sheet in wall cladding, steel gates and similar work, cut to size, holes punched; including round headed screws, clout nails or rivets and fixed to wood or steel framing with plain 40 mm lap joints with riveted or welded seams, including bending or turning up, mitred angles, etc. as required |
| 20 | M&L for preparation of new painted steel surfaces of any description, not otherwise described, over 10cm width or girth and applying two coat of synthetic enamel paint (ordinary tint) over red oxide,zinc chrome complete all as specified and directed. |
| 21 | M&L for preparation of old painted steel surfaces of any description, not otherwise described, over 10cm width or girth and applying two coat of synthetic enamel paint (first quality) complete all as specified and directed. |
| 22 | Taking down shutters of any description area exc 1 sqm and n exc 2 sqm each complete all as specified & directed. |
| 23 | Taking down shutters of any description area exc 2 sqm each complete all as specified & directed. |
| 24 | Taking down chowkhats or frames with shutters exc 1.5 Sqm but not exc 4 Sqm each (without taking off shutters from the frame) complete all as specified & directed. |
| 25 | Taking down chowkhats or frames with shutters not exc 1.5 Sqm each (without taking off shutters from the frame) complete all as specified & directed. |
| 26 | S & F 35mm second class hard wood Plain, framed, panelled shutters (any number of panels), with panels of timber flat on both sides (feather edged), or of veneered particle board medium density, wood particle board with commercial face veneers: supplied and fitted to chowkats complete all as specified and directed. |
| 27 | S&F 300mm long aluminium anodised sliding door bolts , plate type ,stove enameled black , with bright bolt not less than 12mm dia with and incl minimum of 6 bolts and nuts ,four on bolt plate and two on staple. |
| 28 | S&F 100mm long Aluminium butt hinges of extruded aluminium alloy with galvanized mild steel hinge , pin anodized complete all as specified |
| 29 | S&F 150mm long aluminium anodised handle fabricated type complete all as specified and as directed by Engineer-In-Charge. |
| 30 | S&F 150mm long aluminium anodized barrel tower bolt of extruded section complete all as specified and directed by Engineer-In-Charge. |
| 31 | S&F Anodised aluminium window and ventilator shutters, fixed type without sash bar, aluminium section weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws etc. complete all as specified |
| 32 | S&F anodised aluminium door/window/ventilator shutters shutters,aluminium section weighing 0.55 kg/m including necessary joining cleats,glazing clips, ruber neoprene packing,handles 2 Nos in each door, hinges,nodised aluminum snap beadingscrews etc. complete all as specified |
| 33 | S&F anodised aluminium frame for doors, windows, ventilators fabricate & fix anodised aluminium sliding windows/ ventilators with one or more rebates including joining cleat for fixing etc. complete all as specified |
| 34 | S&F anodised aluminium grill (anodised transparent or dyed to required shade according to IS: 1868 with minimum anodic coating of grade AC 15) of approved design/pattern, with approved standard section and fixed to the existing window frame with C.P. brass/ stainless steel screws @ 200 mm centre to centre, including cutting the grill to proper opening size for fixing and operation of handles and fixing approved anodised aluminium standard section around the opening, all complete as per requirement and direction of Engineerin-charge. complete all as specified |
| 35 | Hacking out old broken glass (any thickness, size quality or description) from wooden frames or stone, concrete or brick surrounds glazed with putty or fixed with beads complete all as specified & directed. |
| 36 | M&L for 5.5mm thick sheet glass in squares exceeding .50 Sqm in each pane with oil putty in complete all as specified & directed. |
| 37 | S&F in repair for galvanised M S Wire cloth of 0.56 mm nominal dia of wire and average width of aparture 1.18 mm fixed with tinned tack for galvanized wire staple complete all as specified & directed. |
| 38 | Dismantling wall and ceiling boards (fibre, pulp, insulation etc.) any thickness, including cover fillets complete all as specified and as directed. |
| 39 | M&L for 6mm thick decorative veneered decorative plywood, grade 1 (with BWR resin) with decorative face veneers on one faces fixed with screws to timber frame work as in wall pannelling/ceiling/cup board shutters complete all as specified & directed. |
| 40 | Dismantling Unframed timber scantlings under 40 sq. cm in fillets, rails, posts, rafters, purlins, etc. in any position complete all as specified. |
| 41 | M&L 2nd class hard wood for Plain fillets exc 13 sq.cm but n.exc 25 sq.cm, rectangular or triangular in section, clean sawn, secured with nails or brads complete all as specified and directed by Engr-in-charge. |
| 42 | All as per item 41 above exc 6 sq.cm but n.exc 13 sq.cm but bull nosed, splayed, chamfered or rounded on one edge or face for corner complete all as specified and as directed. |
| 43 | M&L 2nd class hard wood for Plain fillets n.exc 3 sq.cm, rectangular or triangular in section, clean sawn, secured with nails or brads complete all as specified and directed |
| 44 | Dismantling Unframed timber scantlings 40 Sq. cm and over in section and in any position complete all as specified. |
| 45 | M&L clean sawn 2nd class hard wood in scantling timber framed work fixed with screws/ nails complete all as specified and directed by Engr-in-charge. |
| 46 | S&F in repair Vitreous China wash down water closet pan (pedestal pattern), white (excluding fixing bolts, flushing cistern and flush pipe) including Flush pipe of polyethylene of low or high density or PVC. 32 mm dia, for low level cistern including cover and complete all as specified. |
| 47 | S&F in repair CP jet Spray with 15mm bore flexible connecting pipe complete with all assembly as directed. |
| 48 | S & F in repairs PVC valveless, syphonic action type, flushing cistern of 10 ltrs capacity, high or low level, white, with inlet, ball valve, float and handle including brackets, and connections to flush pipes of polyethylene of low or high density or PVC. 32 mm dia, for low level cistern complete all as specified and directed. |
| 49 | S&F in repairs for Wash basins, Vitreous China (flat back or angle back type) size 580X450mm, including cutting for and pinning in ends of brackets or erecting stand but exclusive of fixing of supply and waste pipe , complete all as specified and as directed. |
| 50 | S&F in repairs mirror glass of size 0.60X0.450m bevelled edge mirror of selected quality glass mounted on 6mm thick AC building board or commercial plywood and fixed to wooden plugs with cromium plated brass screw and cup washer etc complete all as specified and as directed. |
| 51 | S & F in repairs 20 mm dia Aluminium anodised tubular towel rail, D type,one pair of fixing brackets , 60cm long between flanges complete all as specified and directed. |
| 52 | S & F in repairs Soap dish, any type, fixed to plugs with chromium plated brass screws Soap dish, vitreous China white, ap proximate size 160x 160x90 all as specified and directed. |
| 53 | S & F in repairs Sheet glass shelf assembly consisting of 5.5mm thick sheet glass shelf 12cm wide with chromium plated bracket guard and railing 60cm long all as specified and directed. |
| 54 | S&F in repair brass CP Stop cock/ Angle cock 15 mm fancy type choromium platedetc, complete all as specified and as directed. |
| 55 | S&F in repairs PVC connection 15mm size with PTMT nuts of length 450mm complete all as specified and as directed. |
| 56 | S&F in repairs pillar taps 15mm dia cast copper alloy capstan heads, chromium plated, screwed down high pressure with or without lettered HOT or COLD with long screwed shank and fly nuts screwed for iron pipe and fixed bore of pipe 15mm complete all as specified and direrected. |
| 57 | S&F in repairs bib taps cast copper alloy , choromium plated ,with crutch or butter fly handle screwed down screwed for iron pipe etc complete 15mm dia complete all as specified and as directed. |
| 58 | S&F PVC waste pipe 32mm bore with cup and washers for WHB complete on new or old locations complete all as specified and as directed. |
| 59 | S&F in repair C.P. grating 100mm square/round with or without hole, complete,all as specified and directed. |
| 60 | S&F in repairs of UPVC floor trap, plain with grating, diameter of outlet in 75mm including jointing to waste pipe fixed with solvent cement complete all as specified and as directed. |
| 61 | Dismantling water tanks of capacity exc 250 & n exc 500 litres and removing to all store as specified and directed |
| 62 | S&F PUF insulated cylndrical tank of capacity 500 Ltr Vertical type double layer duly filled with puf insulation superior quality to resist in temp -30 to +35 degree centigrade alongwith hinged top lid of same material with locking arrangement and hoisted on platform complete with making pipeline connection with the following specification:-(a) Inner tank will be double layered HDPE food grade material.(b) Outer 4mm thick FRP jointless casing of tank.(c) Thickness of PUF insulation shall be 75mm.(d) Minimum density of PUF insulationshall be 44 kg per/cum+ 10%.MAKE-ACE or equivalent. |
| 63 | S & F in repair 20mm bore of pipe PP-R Ball valves (brass insert) as per requirement of the site, complete, all as as specified and directed. |
| 64 | S & F in repair 20mm bore of pipe PP-R Gate valves (brass insert) as per requirement of the site, complete, all as as specified and directed. |
| 65 | Taking up or down 15 mm steel tubing and connections, including cleaning for re fixing or removal to store all as specified and directed. |
| 66 | Taking up or down 20 mm steel tubing and connections, including cleaning for re fixing or removal to store all as specified and directed. |
| 67 | Taking up or down 25 mm steel tubing and connections, including cleaning for re fixing or removal to store all as specified and directed. |
| 68 | S&F 16mm bore of pipes in 3- layer PP-R Polypropylene random copo lymer) conceal ed pipes SDR 7.4 (PN16) UV stabi lized and antimi crobial fusion welded having thermal stability for hot & cold water supply all PP-R plain & brass threaded polypropylene random fittings laid in trenches complete all as specified |
| 69 | S&F 20mm bore of pipes in 3- layer PP-R Polypropylene random copo lymer) conceal ed pipes SDR 7.4 (PN16) UV stabi lized and antimi crobial fusion welded having thermal stability for hot & cold water supply all PP-R plain & brass threaded polypropylene random fittings laid in trenches complete all as specified |
| 70 | S&F 25mm bore of pipes in 3- layer PP-R Polypropylene random copo lymer) conceal ed pipes SDR 7.4 (PN16) UV stabi lized and antimi crobial fusion welded having thermal stability for hot & cold water supply all PP-R plain & brass threaded polypropylene random fittings laid in trenches complete all as specified |
| 71 | Dismantling of cast iron ,PVC or reinforced concrete pipes 110 mm/ 75mm dia bore jointed in cement mortar and taking out of trenches if reqd of any dia complete all as specified and as directed. |
| 72 | S & F 75mm dia bore PVC (SWR) pipes single socketed , in any length with rubber ring joints , laid in tenches or in floors, complete all as specified and directed. |
| 73 | S & F 110 mm dia bore PVC (SWR) pipes single socketed , in any length with rubber ring joints , laid in tenches or in floors, complete all as specified and directed. |
| 74 | S & F 75 mm dia bore PVC (SWR) bends any radius, complete all as specified and directed. |
| 75 | S & F 110 mm dia bore PVC (SWR) bends any radius, complete all as specified and directed. |
| 76 | S & F 110 mm dia bore PVC (SWR) junction single 'T' equal or unequal fitting, complete all as specified and directed. |
| 77 | S & F 75 mm dia bore PVC (SWR) junction single 'T' equal or unequal fitting, complete all as specified and directed. |
| 78 | S & F 110 mm dia bore PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to walls |
| 79 | S & F 75 mm dia bore PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to walls |
| 80 | Demolition of precast concrete block walling built in cement morter complete all as directed. |
| 81 | M&L for precast cement concrete block masonary walling type C-I 1:3:6 using 20mm graded aggregate with solid blocks, exc. 10 cm in width and setting in CM 1:6 complete. |
| 82 | Taking down cement plaster on brick or stone walls, etc. including raking out joints, hacking for key, scrubbing down with water, etc complete all as specified and directed. |
| 83 | M & L for rendering 15mm thick in cement plaster 1:4 on on fair faces of brick work or concrete surfaces even and smooth without using extra cement complete all as specified and directed. |
| 84 | M & L for preparation of new plastered surface of wall and applying two coats of cement base paint over a coat of alkali resistant priming paint complete all as specified and directed. |
| 85 | M&L for rendering 10mm thick on fair faces of brick work or concrete surafces in CM 1:4 complete all as specified and as directed. |
| 86 | M & L for preparation of surfaces of new plaster surface of wall and applying two coats of oil emulsion distemper over a Chalk whiting, on plastered surfaces, preparatory to distempering ,complete all as specified and directed. |
| 87 | M & L for Non - skid coloured Ceramic tiles 7 to 8 mm thick area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors laid over 15mm thick screed bed in CM 1:6 as in floor etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match complete all as specified and directed . |
| 88 | Demolition of Reinforeced Cement concrete cover slab for MH/Septic tank and removing the debris to a distance not exe 500 M as directed. |
| 89 | M&L Precast cement concrete 1:2:4 type B1 using 20 mm graded stone aggregate for cover slab for man holes/Septic tank set in CM 1:4 complete all as specified and directed. |
| 90 | S&F for Mild steel deformed bars or TMT bars 10mm dia cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and as directed. |
| 91 | M&L Mild steel deformed bars or TMT bars 6 mm to 8 mm dia, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia complete all as specified and directed. |
| 92 | S&F for Vitrious china squattin pan ,Orrissa Paattern Size 580x440 mm white with integral foot rests and 'P' or 'S' trap ( Excluding flushing cistern and flush pipe) complete all as specified and as directed. |
| 93 | S&F in repairs vitreous China bowl urinal flat back, size of 465 x 355 x 265 mm white (minimum), with grating and union for discharge pipe (excluding flushing cistern, flush pipe and waste pipe) complete all as specified and as directed. |
| 94 | S&F Toughnrd glass 10mm thick as hinged doors, partitions automatic doors and similar work including cutting to shape, drilling holes required. in complete all as specified & directed. |
| 95 | S&F in repairs chromium plated shower roses with or without swivel joints, any size, including fixing to steel pipe or union complete all as specified and as directed. |
| 96 | Dismantling water tanks of capacity exc 500 & n exc 1000 litres and removing to all store as specified and directed |
| 97 | S & F 1000 Ltr capacity Rotational moulded polye thylene water storage tanks (cylindrical vertical with closed top) hoisted and fixed in position all as specified |
| 98 | Refixing in door chowkhat with shutter chowkhats or frame exe 1.5 Sqm but not exe 4.0 Sqm each complete all as specified and as directed. |
| 99 | M & L cast iron floor trap 75 mm out let dia with grating including jointing to waste pipe fixed incement concrete type B-1 (1:2:4) complete all specified |
| 100 | S & F 3 mm thick glass sheet any size ordinary qlty in steel or wooden frames complete with fixing materials such as putty glazing pins wooden beads etc complete all as specified and as directed. |
| 101 | Soap dish, any type, fixed to plugs withchromiu, plated brass screws complete all as specified and as directed. |
| 102 | taking down copper/aluminium point wiring (light, fan, socket or power) complete, including fixture and fittings such as switches, ceiling roses, , pendents, regulators sockets, light fittings , holder, bell push, ding dong etc. removing materials to store for keeping in safe custody or for taking credit ( credit for above items should be made as per conditions separately ) and making good disturbed suefaces of walls, floor etc complete all as specified and as directed. |
| 103 | M&L for point wiring using approved colour coding as per IS with using 1.5 Sqmm multistranded,1100 volt grade copper conductor cable of PVC insulated and unsheathed type alongwith 1.5 Sqmm PVC insulated FRLSH stranded copper conductor cable for continuous earthing in & incl PVC casing & capping with accessories having ISI mark fixed on wall surfaces / ceiling including provision of 2 mm thick sheet metal terminal box with 3 mm thick hylam laminated sheet on top for fixing switches sockets etc. all as specified for one light point/ fan Bell point controlled by one switch complete all as specified and directed by Engineer-in-Charge. |
| 104 | All as per Srl item No 103 here-in-before but controlled with one 3 pin socket outlet 5 Amp, independent board with other switches with cable 1.5 Sqmm complete all as per specified and directed by Engineer-in-Charge. |
| 105 | All as per srl item no 103 here-in-before but controlled with one 3 pin socket 5 Amp on the same board with other switches with cables 1.5 Sqmm complete all as specified and directed by Engineer-in-Charge. |
| 106 | All as per srl item no 103 here-in-before but controlled with one 3 pin socket 15 Amp on the independent board with other switches with cables 2.5 Sqmm complete all as specified and directed by Engineer-in-Charge. |
| 107 | Supply and fixing of socket outlet 5 Amp, 230 Volt, flush button single pole one way complete all as specified and directed by Engineer -in-Charge, |
| 108 | Supply and fixing of switch piano type 5 Amp, 230 Volt, flush button single pole one way complete all as specified and directed by Engineer -in-Charge, Make :ANCHOR or equivalent. |
| 109 | Supply and fixing switch piano type 15 Amp, 230 Volts flush button single pole one way complete all as specified and directed by Engineer-in-Charge. |
| 110 | Supply and fixing socket outlet 3 pin 15 Amp, 2-in one , 230 volts flush type230 Volts flush type complete all as specified and directed by Engineer-in-Charge. |
| 111 | M&L Ceiling rose, 3 terminal with ISI mark all as specified and directed by Engr-In-Charge. Make :ANCHOR or equivalent. |
| 112 | S/F in replacement LED integrated batten tube light fittings 20W 4 Feet long complete with twin core twisted flexible copper conductor cable complete all as specfied and directed. |
| 113 | Supply and fixing LED Lamp 12 Watt in lamp (bulb) holder complete all as specified and directed. |
| 114 | Supply and fix Bajaj LED Bulk head light fittings, 10 W cool white, color temperature 3500-4100K wall mounting type complete all as specifed and directed of equavalent make : CG/Philips/wipro etc. |
| 115 | Supply and fixing in replacement of sheet metal enclosure double door for DBs single pole and neutral for 8 way 240 volt complete all as specified and direct by Engineer-in-Charge . |
| 116 | Supply and fixing in replacement of sheet metal enclosure double door for DBs single pole and neutral for 12 way 240 volt complete all as specified and direct by Engineer-in-Charge . |
| 117 | Supply and fixing in replacement of isolator SPN 40 AMP rating 240V, 10KA 'C' curve in the DB complete with connection testing and commissioning all ass directed by Engineer in Charge. |
| 118 | Supply and fixing in replacement of 240V, 10 KA 'B' curve miniature circuit breaker (MCB) of single poles and current carrying capacity 6 to 32 AMP, in the MCB DB Complete with connection testing and commissioning complete all as specified and as directed. |
| 119 | M & L in replacement for earthing complete with galvanised steel earth plate electrode 600x600x6.0 mm thicj\k buried directly in ground ( earth pit not less than 2.25 metres deep below ground level) with top edge of the plate not less than 1.5 metres below normal ground level, connected to galvanised iron wire of 4.0 mm dia as earth continuty conductor by means of bolts, nuts check nuts and washers of galvanised iron or steel all as shown in electrical plate No 3 of SSR-I 2010, connected to main switch board all as specified and including testing on completion , necessary excation, earthwork, PCC works ans CI earth pit cover with watering pipe 20 mm dia GI pipe medium grade , funeels with wire mesh and lugs GI pipe of 15 mm dia of light grade for protection of earth wire upto 7.5 mtrs complete all as specified and directed by Engineer-in-Charge. Note:- On testing after completion if the desired resistance is not obtained the earthing shall be re- done aat no extra cost. |
| 120 | Supply and fixing in replacement of 1100 Volts grade heavy duty cable PVC insulated aluminium stranded conductor served with inner sheathing of PVC tape and overall PVC sheathed in service connection suspended by insulating hangers not more than 1 meter apart including 4mm suspension wire one twin core cable flat or circular of size 10 Sqmm completed. |
| 121 | Supply and fixing air termination single pointed aluminium rod 12 mm 300 mm long include fixing on aluminium flat saddle on roof/wall with ms clamp/ nut bolt washer complete all as specified and directed. |
| 122 | M&L for Aluminium strip 25 x 3 mm with saddles and fixing screws etc for roof conductor and down conductors above ground for fitting the strips. |
| 123 | M & L for earthing complete with galvanised steel earth plate electrode 600 x 600 x 6.0 mm thick burried directly in gorund (earth pit not less than 2.25 Mtr normal ground level),and top edge of earth plate not less than 1.5 mtr below normal ground level, connected to galvanised earth strip 32 x 6 mm means of bolts, nuts & check nuts, and washers of galvanised iron protection pipe light grade of 40 mm dia and watering pipe medium grade of 20 mm dia and filled with alternate layer of charcoal and common salt, watering funnel with wire mesh, earth pit chamber and cover CI frame PCC 1:3:6 type C-2 all as shown in electrical plate No-3 of SSR part-I of 2009 connected to earthing test point all as specified and indicated including all earth work excavation, returning filling and disposal of surplus soil and testing on completion. |
| 124 | Supply and fixing test point terminal block made of gun metal or phosphorus bronze size drilled and screwed including75x75x25mm 3 nos. 8mm dia 25mm long hex. head screw complete all as specified and directed. |
| 125 | Supply and fix electric water heater, storage type steel body and heating element upto 2 KW capacity 25 litre, BEE 5 Star rated complete with all accessories such as safety valve, thermostate, NRV, connection piece etc. |
| 126 | Supply and fix exhaust fan, PVC body AC single Phase. 230V of size 300 mm sweep with, blades, and frame and louvers all as per specified and directed by Engieer-in - Charge . |
| 127 | Supply and fixing replacement LED intigrated ceiling recess light fittings 40 Watts 2x2 feet long complete with twin core twiste flexible copper conductor cable complete specified and directed by Engrs-in- Charge . |
| 128 | Schedule of Credit Please Enable Macros to View BoQ information |
