|
| 1 | Taking down chowkats or frames with shutters (without taking off shutters from the frames) area exceeding 1.5 Sqm and not exceeding 4 Sqm each complete all as specified and directed. |
| 2 | Taking down chowkats or frames with shutters (without taking off shutters from the frames) area not exceeding 1.5 Sqm each complete all as specified and directed. |
| 3 | Demolition Mud block masonry built in Mud mortar including all quoins, arches, pillars, etc, complete all as specified and as directed. |
| 4 | M&L for pre cast cement concrete block masonary of 1:3:6, type C-1 (using 20 mm graded crushed stone aggregate) with soild blocks, exc.10cm in width, set and jointed in cement mortor 1:6 complete all as spd and directed. |
| 5 | S&F 2nd class hard wood plain, solid, straight chowkets and frames, battens for grids of ceiling & lining wrought, framed rebated on the solid, rounded or chamfered, put together with glue pinned at joints, supplied and fixed complete all as specified and directed. |
| 6 | S&F for 35 mm thick 2nd class Hard wood plain framed paneled shutters (any number of panels) with panels of timber flat on both sides (feather edged), or of veneered particle board medium density, wood particle board with commercial face veneers, Supply and fixed to chowkats , complete all as specified and directed. |
| 7 | M&L for preparation of new wooden surface of any description not otherwise described over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified and directed. |
| 8 | S&F mild steel butt hinges, medium weight cold rolled 100mm size complete all as specified and as directed. |
| 9 | S&F 150mm long aluminium anodized, barrel tower bolt of extruded section complete all as specified and as directed. |
| 10 | S&F 150mm size extruded aluminium alloy handles, fabricated type, anodized complete all as specified and as directed. |
| 11 | S&F 200mm long aluminium alloy, anodized, sliding door bolt with hasp & staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolt and sliding bolts of extruded section or cast aluminium alloy fixed complete all as specified and as directed. |
| 12 | M&L for 9mm thick prelaminated particle board medium interior grade, prelaminated one side with decorated choice lamination & other side balancing white lamination fixed with screws to timber frame work as in wall panelling, shelves/boarding including dismantlng complete all as specified and as directed. |
| 13 | M&L for 9mm thick prelaminated particle board medium interior grade, prelaminated one side with decorated choice lamination & other side balancing white lamination fixed with screws to timber frame work as in ceiling, including dismantlng complete all as specified and as directed. |
| 14 | M&L for 2nd class hard wood clean sawn as in scantling fixed with nails, framed and fixed as in framed work including dismantling of existing timber scantlings 40 Sqcm and over in section, in any position complete all as specified and directed. |
| 15 | M&L for 2nd class soft wood clean sawn as in beeding for edges of Ceiling ,lining ,or wooden flooring work fixed with nails exc 6 sqcm and n exc 13 sqcm in section including dismantlng complete all as specified and as directed. |
| 16 | M&L Non-Skid Ceramic tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.18 sqm not exceeding 0.38 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match with the shade of tiles including 15 mm thick screed bed or bedding layer in Cement Mortar 1:6 for laying floor finishes incl dismantling floor tiling including cement mortar bedding (but not backing), removing serviceable tile to store and rubbish off the premises complete all as specified and directed. |
| 17 | M&L for 15mm thick rendering on other than fair faces of brick works finished even and smooth without using extra cement in cement mortar 1:4 |
| 18 | M&L for 15mm thck rendering on fair faces of brick works in cement mortar 1:6 finished even and smooth without using extra cement in cement mortar. |
| 19 | M&L for preparation of new surfaces and applying two coats of cement base paint on new treated surface of wall etc complete all as specified and directed. |
| 20 | M&L for preparation of new surfaces and applying two coats of oil bound distemper of wall etc complete all as specified and directed. |
| 21 | Steel window 1.25mm thick box type (Primer coated) ERW hollow P section of size 60mm x 25mm double rebated comprises gauged, glazed skelton shutter ERW Sec 50mm x 20mm and 1mm thick with two openable leaf consiting two Nos sash bar of T-Section 20mm x 3mm complete welded to frame with one vertical mullion of ERW box type T-section of size 30mm x 25mm and 1.25mm thick including cutting holes and making good dismantled portion in PCC M-15, type B-0 (04 No's for each window, steel duly painted with one shop coat of zinc chromate primer on prepared surfaces) and finishing the surfaces to match with existing including following fitting welded to frame shutter:-(i) Hold fast, 150mm long of 12mm x 3mm made to shape -04 Nos per window.(ii) Handle of Z section 20mm x 25mm, 100mm long -1 No per leaf.(iii) MS tower bolt 150mm long - 2 No per leaf(iv) Z section 20mm x25mm, 100 long stopper - 1 No per leaf.(v) Cleat 65mm long of hollow square 15mm x 20mm x 63mm welded to hinge -1 No per leaf.(vi) Mild steel pintle hinge of size 75mm x 12mm - 2 Nos per leaf.(vii) Flat iron fillets of size 20X3 mm for fixing wire gauge. |
| 22 | S&F Galvanised mild steel wire cloth, 0.56mm nominal dia of wire and average width of aperture 1.18mm and fixed with tinned tacks, or galvanised wire staples |
| 23 | S&F Plain Sheet glass 4.00 mm thick, ordinary quality in steel or wooden frames and glazing with oil pane putty in squares not exceeding 0.5 Sqm in each pane, complete complete all as specified and as directed. |
| 24 | M&L Pre- painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws including dismantling of existing plain or corrugated sheet of any description complete all as specified and directed by Engr-in-Charge. |
| 25 | M&L Pre- painted galvalume aluminum zinc coating GI based plain steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws including dismantling of existing plain or corrugated sheet any description complete all as specified and directed by Engr-in-Charge. |
| 26 | M&L for preparation of new steel surface of any description not otherwise described over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of rexoxide primer, complete all as specified and directed. |
| 27 | M&L for preparation of old steel surface of any description not otherwise described over 10 cm width or girth and applying one coats of synthetic enamel paint complete all as specified and directed. |
| 28 | M&L for 75mm thick PCC 1:3:6 type C2 (using 40mm graded stone aggregate) in alternate bay as in plinth protection 1.20 Sqm each, 12mm wide and 5 cms deep joints shall be formed between the bays and shall be filled with mastic filling comprising a mixture of one part of heated blown bitumen VG-10 and two parts of heated coarse sand (by volume) incl dismantling, all as specified. Note:- The unit rate include for use of form work (straight or curved). |
| 29 | Demolition of unreinforced cement concrete in ground floors and paving n.exc 15cm thickness (below or above ground level) and Removing demolished material to a distance and depositing out site of MoD land Where directed at a level not exceeding 100 metre above the starting point complete all as specified and directed by Engineer-in-Charge. |
| 30 | S&F in repairs 25mm dia powder coated mild steel, chromium plated curtain rod including brackets as in repairs. |
| 31 | Taking down carefully copper/Aluminum point wiring (Light, Fan, Socket or power) complete fitting such as switches, ceiling, regulator, sockets etc removing materials to be store for keeping in safe custody for taking credit and making good disturbed surfaces of walls, floors etc as directed. |
| 32 | M&L for point wiring with copper conductor FRLS cable Multistrand, single core 1.5 Sqmm size for one light point or bell point /Ex: fan Point controlled by one switch including one run of 1.5 Sqmm multistrand PVC copper conductor cable for earth continuity in and including PVC casing and capping of approved size and quality fixed on walls/ceiling including rectangular PVC board heavy duty type for mounting switches /sockets etc complete all as directed and specified. |
| 33 | All as per item No 32 but for 5 Amps Socket outlet in same Board with 1.5 sq mm cable complete all as specified and directed by Engr in Charge. |
| 34 | All as per Item No 32 but for 5 Amps Switch Socket Combination in independent board with 1.5 Sqmm Cable complete all as specified and directed by Engr in Charge. |
| 35 | All as per item No 32 above but for power point 3 pin switch socket 15 Amp with PVC copper conductor cable FRLS multistrand unsheathed 2.5 Sqmm on independent board incl one run 2.5 Sqmm multistrand PVC copper conductor cable for earth continuity in and including PVC casing and capping fixed on wall incl including PVC box 2 mm complete all as specified and as directed by Engr in Charge. |
| 36 | Supply and fixing piano switch single pole one way 6 Amps complete all as specified and directed |
| 37 | Supply and fixing Switch socket combination 2 in 1, 3 pin, 5 and 15 Amp flush type universal complete all as specified and directed. |
| 38 | Supply and fixing of switch socket combination 5 amp-2/3 pin complete all as specified and directed. |
| 39 | M&L of socket outlet 5 amp -2/3 pin complete all as specified and directed. |
| 40 | Supply and fixing in replacement of LED lights fitting 1x 20W, 220V, AC decorative box type with driver, holder including LED tube light connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete all as specified and directed. |
| 41 | S&F in replacement LED light fitting mirror type with high out put diffuser 2 feet, 10 watt 220 V AC decorative type with driver holder and LED lamp including connecting up with three core flexible copper conductor cable of suitable size complete all as specified and directed. |
| 42 | S&F in replacement of old U/S Lamp LED 7 Watt, 230 volts 50 Hz AC complete all as specified and directed. |
| 43 | M&L for ceiling rose surface bakelite 65x50 mm two to three terminals complete all as specified and directed. |
| 44 | M&L for lamp holder PVC/polycarbonate type with back platesuitable for batten fittings complete all as specified and directed. |
| 45 | S&F in replacement of Old UNSV sheet metal enclosure SPN for DBs with 200 Amps bus bar of 12 way 240 volts with blank plate Double Door complete all as specified and directed. |
| 46 | S&F in replacement of Old U/S MCB single phase (SP), 6 to 32 Amps 240 Volts C Curve complete all as specified and directed. |
| 47 | S&F in replacement of old MCB SPN,C- curve, 230 volt 63 amp 10KA complete all as specified and directed. |
| 48 | M&L in replacement for sub main wiring with 2 runs of FRLS PVC insulated multistrand, copper conductor cable of size 10 Sqmm along with one run of 10.0 sqmm PVC insulated cable 1100 volts multi stranded copper conductor as earth wire in and including PVC casing & capping complete all as specified and directed. |
| 49 | Supplying and fixing 1100 volts grade heavy duty cable PVC insulated aluminium conductor, served with inner sheathing of PVC tape and overall PVC sheathed in service connections suspendedby insulating hangers not more than 1 metre apart including 4mm suspension wire, from pole/LT distribution panel to DB specified above, one twin core cable flat or circular of size 16 Sqmm complete all as specified and directed. |
| 50 | M&L Earthing complete with galvanized steel earth plate electrode 60 cm x 60 cm x 6 mm thick buried directly in ground (earth pit not less than 2.25 metres deep below normal ground level) with top edge of plate not less than 1.5 metres below normal ground level, connecting to the galvanised iron strip 32×6mm by means of bolts, nuts , check nuts and washers of galvanized iron and galvanised iron strip protected by provision of GI light grade pipe 40 mm bore including provision of concrete pit made from PCC ( 1:2:4) type B-1 (using 20 mm graded stone aggregate) with 40mm thick cover of RCC 1:2:4 reinforced with XPM (Weight not less than 4 Kg/Sqm) and frame of angle iron 40 x 40 x 6 mm and handle of 6 mm dia MS bar made to shape, GI light grade 20 mm bore pipe for watering perforated at bottom, 1.50 metre long placed on top edge of earth plate, common salt & charcoal filling, with fixing arrangement , funnel, wire mesh and earth work in hard/dense soil , returning filling in and removal of surplus soil to a distance not exceeding 50 metres, all as per electrical plate No 3 and connecting to MCBDB’s earth test point all as specified or indicated including testing on completion, complete all as specified and as directed by the Engr-in-Charge.Note: 1.Rate quoted deemed to include GI protection pipe, funnel, excavation and earth work, in soft/loose soil with PCC type C1 in bed and pit |
| 51 | Deduct Schedule of Credit of Rs (-) 92538.00 (Minus) as listed in Schedule 'A' (Contd). Contract Sum shall be arrived after deducting the credit amount.Note :- Tenderers will not quote against this item being a firm amount. Please Enable Macros to View BoQ information |
