|
| 1 | Civil Works |
| 2 | Electrical Works |
| 3 | Ground Floor including Breaking flooring/Waterproofing/PCC |
| 4 | Breaking flooring/pcc/soling/ cement concrete manually/ by mechanical means including disposal of material within 50 metres lead as per direction of Engineer-in-charge.Nominal concrete 1:3:6 or richer mix (including equivalent design mix). |
| 5 | Removing WC /Basin/ Urinal |
| 6 | Dismantling W.C. Pan of all sizes including disposal of dismantled materials including malba all complete as per directions of Engineer-in-Charge. |
| 7 | Demolishing cement concrete manually/ by mechanical means including disposal of material within 50 metres lead as per direction of Engineer - in - charge.Nominal concrete 1:3:6 or richer mix (including equivalent design mix) |
| 8 | Dismantling 15 to 40 mm dia G.I. pipe |
| 9 | Dismantling 15 to 40 mm dia G.I. pipe including stacking of dismantled pipes (within 50 metres lead) as per direction of Engineer-in-Charge. |
| 10 | Removing Door & Ventilator |
| 11 | Dismantling doors, windows and clerestory windows (steel or wood) shutter including chowkhats, architrave, holdfasts etc. complete and stacking within 50 metres lead :Of area 3 sq. metres and below. |
| 12 | Plaster Breaking with dado |
| 13 | Dismantling old plaster or skirting raking out joints and cleaning the surface for plaster including disposal of rubbish to the dumping ground within 50 metres lead. |
| 14 | New PCC |
| 15 | Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level 1:2:4 (1 cement : 2 coarse sand (zone-Ill) derived from natural sources : 4 graded stone aggregate 20 mm nominalsize derived from natural sources). |
| 16 | Lintel work |
| 17 | Reinforced cement concrete work in walls (any thickness), including attached pilasters, buttresses, plinth and string courses, fillets, columns, pillars, piers, abutments, posts and struts etc. above plinth level up to floor five level, excluding cost of centering, shuttering, finishing and reinforcement 1:1.5:3 (1 cement : 1.5 coarse sand (zone-III) derived from natural sources : 3 graded stone aggregate 20 mm nominal size derived from natural sources) |
| 18 | Laying Micro Concrete |
| 19 | Providing and laying/ pouring in position/ location SMC (Self leveling micro concrete) RENDRC RGL or equivalent as directed or as approved by EIC, mixing with specified quantity of water as recommended by the manufacturer including cutting the existing concrete floor to shape with cutting machine only, dismantling the existing concrete floor, cleaning the surface with water, taking rubbish out of AIESL premises, applying bond coat of RBR or equivalent and cement in proportion 1:1 including necessary approved centering and formwork, finishing top as directed including labour , tools plants etc complete. |
| 20 | New Flooring |
| 21 | Providing and fixing 10 mm thick acid and/or alkali resistant,antiskid tiles of approved make and colour using acid and/or alkali resisting mortar bedding, and joints filled with acid and/or alkali resisting cement as per IS: 4457, complete as per the direction of Engineer-in- Charge.In flooring on a bed of 10 mm thick mortar 1:4 (1 acid proof cement : 4 coarse sand) Acid and alkali resistant tile |
| 22 | Plastering |
| 23 | Providing and laying internal plaster in C.M.(1:4) 12mm thick minimum, to brick masonry and/ or concrete surfaces in any location and at all levels including cleaning and watering the surfaces, filling out hollows or out of plumb surfaces with mortar and finishing to correct line and plumb etc. complete. |
| 24 | New Dado |
| 25 | IS: 15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer-in-Charge, in skirting, risers of steps and dados, over 12 mm thick bed of cement mortar 1:3 (1 cement : 3 coarsesand) and jointing with grey cement slurry @ 3.3kg per sqm, including pointing in white cement mixed with pigment of matching shade complete. |
| 26 | Ceiling Repair |
| 27 | Providing and applying rust inhabitation coal/system to exposed reinforcement bars and also new reinforcement bars after removing scales and rust complete as per specification. Providing and applying bond coat to all exposed concrete surface and reinforcement bars prior to any treatment as per specification. Providing and applying single component, fiber reinforced, thixotropic repair mortar of average thickness 50mm and above of \\"'BASF\\" (MASTER EMACO 348 S) as manufacturer's specifications in specific layers, curing the surface after 72 hours of application with wet gunny bags etc. including carting away debris out of AIESL/Airport premises. |
| 28 | Granite work |
| 29 | Providing and laying Polished Granite stone for door frame/ventilator in required design and patterns, in linear as well as curvilinear portions of the building all complete as per the architectural drawings with 18 mm thick stone slab over 20 mm (average) thick base of cement mortar 1:4 (1 cement : 4 coarse sand) laid and jointed with cement slurry and pointing with white cement slurry admixed with pigment of matching shade including rubbing, curing and polishing etc. all complete as specified and as directed by the Engineer-in-Charge.Polished Granite stone slab of colour Black, Cherry/Ruby Red or equivalent. |
| 30 | Aluminium for Door/Window/Ventilator |
| 31 | Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing / panelling, C.P. brass / stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-charge. (Glazing, paneling and dash fasteners to be paid for separately) :For shutters of doors, windows & ventilators including providing and fixing hinges/ pivots and making provision for fixing of fittings wherever required including the cost of EPDM rubber / neoprene gasket required (Fittings shall be paid for separately) Anodised aluminium (anodised transparent or dyed to required shade according to IS: 1868,Minimum anodic coating of grade AC 15) including Soft touch lock |
| 32 | Main Door |
| 33 | Providing and fixing factory made single extruded WPC (Wood Polymer Composite) solid plain flush door shutter of required size comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm2, modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws, all as per direction of Engineer-In- Charge. (Note: stainless steel butt hinges and necessary S.S screws shall be paid separately) Door thickness: 30 mm thick. |
| 34 | Butt Hinges |
| 35 | Providing and fixing ISI marked aluminium butt hinges anodised ( anodic coating not less than grade AC 10 as per IS : 1868 ) transparent or dyed to required colour or shade with necessary screws etc. complete 125x75x4mm |
| 36 | Door Closer |
| 37 | Providing and fixing aluminium die cast body tubular type universal hydraulic door closer (having brand logo with ISi, IS : 3564, embossed on the body, door weight upto 35 kg and door width upto 700 mm), with necessary accessories and screws etc. complete. |
| 38 | Tower bolts |
| 39 | Providing and fixing aluminium tower bolts , ISI marked , anodised ( anodic coating not less than grade AC 10 as per IS : 1868 ) transparent or dyed to required colour or shade , with necessary screws etc. complète |
| 40 | Providing and fixing factory made single extruded WPC (Wood Polymer Composite) solid plain flush door shutter of required size comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm2, modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws, all as per direction of Engineer-In- Charge. (Note: stainless steel butt hinges and necessary S.S screws shall be paid separately)Door thickness: 30 mm thick |
| 41 | Providing and fixing factory made single extruded WPC (Wood Polymer Composite) solid door/window/Clerestory windows & other Frames/ Chowkhat comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2, modulus of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant and fixed in position with M.S hold fast/lugs/SS dash fasteners of required dia and length complete as per direction of Engineer-In- Charge. (M.S hold fast/lugs or SS dash fasteners shall be paid for separately).Note: For WPC solid door/window frames, minus 5 mm tolerance in dimensions i.e depth and width of profile shall be acceptable. Variation in profile dimensions on plus side shall be acceptable but no extra payment on this account shall be made.Frame size 50 x 100 mm |
| 42 | Providing Aldrop |
| 43 | Providing and fixing aluminium sliding door bolts , ISI marked anodised (anodic coating not less than grade AC 10 as per IS 1868 ) , transparent or dyed to required colour or shade , with nuts and screws etc. complete 300x16 mm |
| 44 | Providing and fixing ISI marked aluminium butt hinges anodised ( anodic coating not less than grade AC 10 as per IS : 1868 ) transparent or dyed to required colour or shade with necessary screws etc. complete 125x75x4mm |
| 45 | CPVC Plumbing line Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings and fixing the pipe with clamps at 1.00m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer in Charge. Concealed work, including cutting chases and making good the walls etc. |
| 46 | 20 mm nominal dia Pipes |
| 47 | Soling |
| 48 | 25 mm nominal dia Pipes |
| 49 | PVC pipe (75mm) |
| 50 | Providing and fixing PVC rain / Waste water pipe of ‘’Prince’’ or equivalent approved make conforming to IS 13592 of SWR quality 4 kg/cm2 pressure rated, at any locations and at all levels, scaffolding etc. including all PVC fittings like bends, shoes, clamps, supports etc. jointing with rubber ring/ solvent cement, leak proof adhesive etc. cutting and making good the walls and floors etc. complete. As per instruction of EIC.40 mm dia with GI clamps & GI brackets(Vertical pipes should be fitted 50 mm away from the wall). |
| 51 | Soling |
| 52 | Providing and laying 160 mm dia SN4 class Foam-core PVC pipe with casing in proper line and level, including necessary excavation of trench, preparation of 100 mm sand bedding, laying the pipe to correct alignment and gradient, jointing with approved rubber-ring / solvent-cement as per manufacturer’s instructions, placing and aligning the protective casing pipe, backfilling in layers with selected soil, compaction, disposal of surplus excavated material, and testing of the line for leakage;complete as directed. The pipe shall be SN4 class, ring stiffness ≥ 4 kN/m², conforming to IS 16098 (Part-1): 2013 or equivalent standard, including all fittings, labour, tools & tackles, and all materials required for proper completion of work. |
| 53 | Providing and laying half-round 160 mm dia SN4 class Foam-core PVC pipe with casing, laid in proper line and level, including excavation of trench in all types of soil, preparation of 100 mm thick sand bedding, positioning and aligning the half-round pipe to the specified gradient, jointing with approved rubber-ring / solvent cement as per manufacturer’s guidelines, placing and fixing the protective casing pipe, backfilling in layers with selected soil, watering and compaction, disposal of surplus excavated material, and testing the pipeline for leak-proof performance; complete as directed by the Engineer-in-Charge.The pipe shall be SN4 class, having ring stiffness ≥ 4 kN/m², conforming to IS 16098 (Part-1): 2013 or equivalent, and shall include all required fittings, labour, tools, plants, and materials necessary for the proper completion of the work. |
| 54 | Providing and fixing PVC blind pipe 150 mm dia as per IS: 12818 |
| 55 | Bib Cock |
| 56 | Providing and fixing brass bib cock of approved quality 20 mm nominal bore |
| 57 | Gun Metal gate valveProviding and fixing gun metal gate valve with C.I. wheel of approved quality (screwed end): |
| 58 | 20 mm nominal bore |
| 59 | Soling |
| 60 | 25 mm nominal bore |
| 61 | Paint |
| 62 | Wall painting with acrylic emulsion paint, having VOC (Volatile OrganicCompound ) content less than 50 grams/ litre, of approved brand andmanufacture, including applying additional coats wherever required, toachieve even shade and colour.(Two coats) |
| 63 | SEP Painting |
| 64 | Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade : One or more coats on old work |
| 65 | New Basin |
| 66 | Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever require:White Vitreous China Wash basin size 630x450 mm with a pair of 15 mm C.P. brass pillar taps.including all fittings |
| 67 | Breaking plaster |
| 68 | Providing and fixing PTMT towel ring trapezoidal shape 215 mm long, 200mm wide with minimum distances of 37 mm from wall face with concealed fittings arrangement of approved quality and colour, weighing not less than 88 gms. |
| 69 | Providing and fixing PTMT liquid soap container 109 mm wide, 125 mmhigh and 112 mm distance from wall of standard shape with bracket of the same materials with snap fittings of approved quality and colour, weighing not less than 105 gms. |
| 70 | Providing & fixing sand cast iron floor or Nahani trap of self cleansing design with C.I. grating screwed down or hinged pattern with or without vent arm complete including cost of cutting and making good the walls and floors. 100mm inlet and 75mm outlet etc. complete. |
| 71 | Reinforcement |
| 72 | Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete above plinth level.Thermo-Mechanically Treated bars of grade more. Fe-500D |
| 73 | Debris |
| 74 | Disposal of building rubbish / malba / similar unserviceable, dismantled or waste materials by mechanical means, including loading, transporting, unloading to approved municipal dumping ground or as approved by Engineer-in-charge, beyond 50 m initial lead, for all leads including all lifts involved. |
| 75 | Glass for ventilator/ Window |
| 76 | Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with EPDM rubber / neoprene gasket etc. complete as per the architectural drawings and the directions of engineer-in-charge .(Cost of aluminium snap beading shall be paid in basic item): With float glass panes of 4.0 mm thickness (weight not less than 10kg/sqm) |
| 77 | Providing and fixing MS structure for window Grill & partition , Column protection |
| 78 | Providing and fixing M.S. grills of required pattern in frames of windows etc. with M.S. flats, square or round bars etc. including priming coat with approved steel primer all complete. Fixed to steel windows by welding and for grating |
| 79 | Chamber Grid Cover with Frame |
| 80 | Providing and fixing in position pre-cast R.C.C. manhole cover and frame of required shape and approved quality. L D- 2.5 Rectangular shape 600x450 mm internal dimensions |
| 81 | Brick work |
| 82 | Brick work with common burnt clay modular bricks of class designation7.5 in foundation and plinth in: Cement mortar 1:4 (1 cement: 4 coarse sand) |
| 83 | Finishing with Epoxy paint (two or more coats) at all locations prepared and applied as per manufacturer’s specifications including appropriate priming coat, preparation of surface, etc. complete. |
| 84 | Providing and fixing factory made single extruded WPC (Wood Polymer Composite) solid door/window/Clerestory windows & other Frames/ Chowkhat comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2, modulus of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant and fixed in position with M.S hold fast/lugs/SS dash fasteners of required dia and length complete as per direction of Engineer-In- Charge. (M.S hold fast/lugs or SS dash fasteners shall be paid for separately).Note: For WPC solid door/window frames, minus 5 mm tolerance in dimensions i.e depth and width of profile shall be acceptable. Variation in profile dimensions on plus side shall be acceptable but no extra payment on this account shall be made. Frame size 50 x 100 mm |
| 85 | Providing and applying plaster of paris putty of 2mm thickness over plastered surface to prepare the surface even smooth complete. |
| 86 | Providing & Fixing decorative high pressure laminated sheet of plain/ wood grain in gloss / matt/ suede finish with high density protective surface layer and reverse side of adhesive bonding quality conforming to IS : 2046 Type S, including cost of adhesive of approved quality and removing of exisiting laminate/ door skin. 1.00 mm thick |
| 87 | SITC of 12 way ETPN flameproof D.B. Incomer: 100 A MCB 4P Outgoing: 20A SP MCB 36 Nos. mounting with bracket and all connection and all other required hardware and consumables to complete the job.Approved make: L&T , SCHNEIDER, LEGRAND. |
| 88 | SITC of 12 way ETPN flameproof D.B. Incomer: 100 A MCB 4P Outgoing: 63A TP MCB 4Nos, 20-32A sp MCB 24 Nos. mounting with bracket and all connection and all other required hardware and consumables to complete the job. Approved make: Approved make: L&T , SCHNEIDER, LEGRAND |
| 89 | SITC of powder-coated industrial type 20A P+N+E socket with 2P MCB flameproof MS box mounting with bracket and all required hardware and connection.Approved make: Approved make: L&T , SCHNEIDER, LEGRAND |
| 90 | SITC of 4 feet ceiling mounted flameproof double tubelight fitting 20W each. Job includes light fitting mounting at ceiling with required hardware and consumeables. Approved make: Syska, Crompton, Surya, Philips. |
| 91 | Supply and laying of 2.5 sq mm 3 Core copper armoured cable with saddles, spacers,terminations, glands etc. and all other required hardwares and consumables to complete the job as directed by Engineer Incharge.Approved Make-Polycab,Finolux |
| 92 | Supply and laying of 4 sq. mm, 4-core copper armoured cable through or on the walls, including the provision of saddles, spacers, terminations, glands, and all other required hardware and consumables to complete the job as directed by the Engineer-in-Charge (EIC)Approved Make-Polycab,Finolux |
| 93 | Supply and laying of 50 sq. mm, 4-core Aluminium armoured cable through or on the walls, including the provision of saddles, spacers, terminations, glands, and all other required hardware and consumables to complete the job as directed by the Engineer-in-Charge (EIC).Approved Make-Polycab,Finolux |
| 94 | Supply and laying of 150 sq. mm, 4-core Aluminium armoured cable through or on the walls, including the provision of saddles, spacers, terminations, glands, and all other required hardware and consumables to complete the job as directed by the Engineer-in-Charge (EIC).Approved Make-Polycab,Finolux |
| 95 | SITC of powder-coated industrial type 20A 3P+N+E socket with 4P MCB flameproof MS box mounting with bracket and all required hardware and connection.Approved make: Approved make: L&T , SCHNEIDER, LEGRAND |
| 96 | SITC of Powder coated factory made 12 way SPN DD DB with new termination, fixing bracket and all other required hardwares and consumeables to complete the job as per instruction of EIC.Incomer - 32A 2P MCB, 1 no.Outgoing - SP 6-10A MCB, 10 nos.Approved makes - Schneider, Legrand,L&T. |
| 97 | SITC of 125A fn type switch with encloser mounting with bracket. Job includes installation of switch with all connection, termination and required hardware and material. Approved makes - Schneider, Legrand,L&T. |
| 98 | Removal of all unused cables and conduits, unwanted switches, along with the laying and saddling of all active cables and conduits in the COD Cleaning Section.The scope includes the removal and dumping the scrap at designated area as per instruction of EIC. necessary to complete the job, as per the directions of the Engineer-in-Charge (EIC). |
| 99 | Removal of existing Exhaust fans and reinstallation of the same after civil works completion. |
| 100 | SITC of 6 moduler 2 switch/ 2 socket for general use at various locations with 2.5 sqmm wire and 20mm MS conduit. Job include point wiring for switch board. Approved Make - 1) Electrical Cable - Polycab/ Anchor/ Finolex 2) Switchgear - Anchor/ GM/ Roma |
| 101 | Removal, shifting, reinstallation and commissioning of sanding M/c, Welding M/c, Grinding M/c, Therelac Oven, Wild Barfield Furnace, Air Pit Furnace, water tank. |
| 102 | Shifting & Installation of Chain Pully block (500 KG) as advised by EIC |
| 103 | Shifting of lathe machines (Qty.3), Grinder Machines (Qty.3) and Saw Machine (Qty.1) from COD, existing Machine Shop, Ground Floor, Hangar No. 1 to proposed COD Machine Shop (Old Fan T/R Section), Ground Floor , Hangar 2. Conect the equipment with respective electrical source. |
| 104 | FAN TR Section - Supply, Installation, testing and commissioning of 8-Way VTPN DD MCCB DB: Factory-made, powder-coated, 6-way distribution board with MCCBs and MCBs.Incomer (Main Incoming ): 200A, 4P MCCB, 1 no.( for incoming power supply).Outgoing Circuits:3P, 63A MCBs, 8 nos. (for various outgoing loads). Approved Makes: Legrand/ Schneider for the MCCB, MCB, and other associated components. |
| 105 | Cable Connections:Incomer - 4C X 50 sqmm, Aluminum, Armoured, length - 50 M. and outgoing cables -4C X 4 sqmm, Copper, Armoured, length - 100 M Approved Makes: Polycab/ Anchor/ FinolexJob includes: laying and termination of cables with required lugs, glads, screw.fixing of D.B with bracket and IN/OUT connection,ALL complete with hardware, and consumables to complete the job in its totality. Please Enable Macros to View BoQ information |
