|
| 1 | Dismantling roofing including ridges, hips, valleys and gutters etcetera and stacking the material within all leads of G.S. sheet. Recovery of useful material i.e. G.S. sheet 199.84 sqm (one hundred ninety nine decimal eight four square metre) @ Rs. 25/- (at the rate of Rupees twenty five) only per Square metre shall be recovered from the contractor, as per direction of the Engineer in charge, including carriage of material within all leads, lifts and other incidental. The rate is including octroi, royality, malkana, toll tax, GST or other taxes imposed by the Government. |
| 2 | Dismantling steel work manually/ by mechanical means in built up sections without dismembering and stacking within all leads, Recovery of useful material i.e. steel work 129.53 kg (one hundred twenty nine decimal five three kilogram) @ Rs. 25/- (at the rate of Rupees twenty five) only per Kilogram shall be recovered from the contractor, as per direction of the Engineer in charge, including carriage of material within all leads, lifts and other incidental. The rate is including octroi, royality, malkana, toll tax, GST or other taxes imposed by the Government. |
| 3 | Earth work in excavation for all type of road structure such as retaining walls, breast walls, culverts, drains and parapets etcetera and other similar structure in all type of classification of soil comprising of ordinary soil, ordinary rock, hard rock chiseling /wedging out rocks ( Where blasting is prohibited) complete in accordance with the line and dimensions shown in the drawings as per M.O.R.D. technical specification section 300 and 1600 and as per direction of the Engineer- in – Charge including setting out shoring and bracing , removal of stumps and other deleterious materials and disposal of materials upto any lead and lift including dressing of sides and bottom and back filling in trenches with excavated suitable approved material to the original surface in layer not exceeding 150mm (One hundred fifty milimeter) compacted thickness including shoring, strutting and pumping and bailing out water (surface and sub soil water ) upto any depth and quantum of water including cleaning of slush which may arrise out during dewatering as per entire satisfaction and direction of Engineer-in-Charge. including carriage of materials within all leads, lifts, other incidental . The rate is including octroi, royality, malkana, toll tax, GST or other taxes imposed by the Government. |
| 4 | Providing and fixing 150mm (One hundred fifty milimetre) dia M.S. (Mild steel) Hollow pipe embeded in cement concrete masonary work and filled with heavy duty in cement mortar 1:3 (One cement : three sand) 18.40kg/ per Rmt (eighteen decimal four zero kilogram per running Metre), as per direction of the Engineer in charge, including carriage of material within all leads, lifts and other incidental. The rate is including octroi, royality, malkana, toll tax, GST or other taxes imposed by the Government. |
| 5 | Providing and laying mechanically mixed and vibrated concrete for plain concrete in open foundation for all type of structure complete of concrete grade M-10 ( M Ten) nominal mix 1:3:6 ( One cement : three sand : six graded crushed/ broken stone aggregate 20mm (Twenty millimeter) nominal size on ground or under water including pumping or bailing out water / dewatering removal of slush as required at site which may arise at the time of laying concrete complete for all heights/ depths and curing complete including the cost of form work as per drawings and M.O.R.D. technical specification section 800, 900 and 1200 as per the direction and entire satisfactions of Engineer-in-Charge, including carriage of material within all leads, lifts and other incidental. The rate is including octroi, royality, malkana, toll tax, GST or other taxes imposed by the Government. |
| 6 | Steel work welded in built up sections, trusses and framed work composed of beam, joists, channels, angles, tees, flat and connecting plates or angle cleats etcetera as in trusses and trussed purlins, main and cross beams hip and jack rafters, purlins connected to common rafters and the like in building including cutting, fixing, lifting, hoisting and placing in position complete and applying a priming coat of red lead paint complete, as per direction of the Engineer in charge, including carriage of material within all leads, lifts and other incidental. The rate is including octroi, royality, malkana, toll tax, GST or other taxes imposed by the Government. |
| 7 | Providing and fixing prepainted steel sheet roofing over steel trusses providing and fixing Kotar metal or equivalent prepainted single skin trapezoidal profile sheeting 0.60mm (zero point six zero milimeter) thick having 1060mm (one thousand sixty milimeter) cover width (overall width 1126mm (one thousand one hundred twenty six milimeter) 28mm (twenty eight milimeter) crest depth at 353 (three hundred fifty three) + (plus minus) 2mm (two milimeter) centre to centre crest distance there will be two ribs at the centre for stiffening having depth of 2.5mm (two point five milimeter), main crest width at top 25mm (twenty five milimeter) and at the lower 81mm (eighty one milimeter) base metal of cold rolled steel coil with zinc coating top coat with regular modified polyster coating of approved shade and balancing reverse coat with polyster paint, fixing of sheet shall be with self drilling and self tapping screws of size 5.5mm (five point five milimeter) dia 75.5mm (seventy five point five milimeter) length with EPDM seal. The material supply will be accompanied by test certificate and against corrosion/ fading colour and manufactured defects, including carriage of materials within all leads, lifts and other incidental. The rate is including of octroi, Malkana, toll tax, GST or other taxes imposed by the Government. |
| 8 | Providing and fixing ridges or hips prepainted plain galvanized steel sheet with hot dipped metallic Zinc coated sheet with top coat of regular modified polyster (RMP) organic coating of 20 (Twenty) microns over 5 (Five) microns of primer back coat of polyster and 5 (five) microns over 5 (five) microns primer coating including fixing with prepainted iron J or L hooks bolts and nuts 6mm (six milimetres) diameter with prepainted galvanized iron limpet and bitumen washers filled with required shade of colour and laid complete within all accessories as required upto any height as per the directions of the Engineer-in-Charge, 0.60mm (zero point six zero milimetres) thick prepainted galvanized steel sheet of ISI marked Z-120 (Z-one hundred twenty) of approved colour, as per direction of the Engineer in charge, including carriage of material within all leads, lifts and other incidental. The rate is including octroi, royality, malkana, toll tax, GST or other taxes imposed by the Government. |
| 9 | Providing and fixing M,S. BP sheet 1.66mm to 2mm (one point six six milimetres to two milimetres) thick in eaves board/facia/soffits/ ceiling including cutting, fixing and welding to steel roof members and applying a coat of red lead primer complete as per the instruction of Engineer-in-Charge (Base members of steel work shall be measured and paid separately), as per direction of the Engineer in charge, including carriage of material within all leads, lifts and other incidental. The rate is including octroi, royality, malkana, toll tax, GST or other taxes imposed by the Government. |
| 10 | Providing and fixing anodized aluminum work for door, windows, ventilators and partitions frames with extruded built up standard tubular and other sections of approved make confirming to IS 733 and IS 1285 anodized transparent or dyed to required shade according to IS 1868 (minimum anodic coating of grade AC 15) fixed with rawl plugs and screws or with fixing clips, or with expansion hold fastener including necessary filling up of gaps at junction, at top, bottom and sides with required PVC/neoprene felt etcetera. Aluminum sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleats angle, aluminum, snap beading for glazing/paneling C.P. brass/stainless steel screws, all complete , as per direction of the Engineer in charge, including carriage of material within all leads, lifts and other incidental. The rate is including octroi, royality, malkana, toll tax, GST or other taxes imposed by the Government. |
| 11 | Providing and fixing in aluminium door, window, ventilator shutters and partitions etcetera with EPDM rubber/ neoprene gasket etcetra complete in all respect, as per direction of the Engineer in charge, including carriage of material within all leads, lifts and other incidental. The rate is including octroi, royality, malkana, toll tax, GST or other taxes imposed by the Government. |
| 12 | Providsing and fixing 4mm (four milimetre) thick E Board (Embessed board) ceiling of approved quality of ISI mark including fixing to base frames with screws and clamps etcetera complete (frame work for base and cover fillets to be measured and paid for separately), as per direction of the Engineer in charge, including carriage of material within all leads, lifts and other incidental. The rate is including octroi, royality, malkana, toll tax, GST or other taxes imposed by the Government. |
| 13 | Painting wood work with Deluxe Multi Surface Paint to give an even shade. Two or more coat applied at the rate of 0.90 ltr/ 10 sqm (zero decimal nine zero litre per ten square metre) over an under coat of primer applied at the rate 0.75 ltr/ 10 sqm (zero decimal seven five litre per ten square metre) of approved brand and manufacture as per direction of the Engineer-in-Charge, including carriage of material within all leads, lifts and other incidental.The rate is including royality , octroi, GST, Toll tax, malkana and all other taxes as imposed by the Government. |
| 14 | Distempering (two coat) with oil bound washable distemper of approved brand and manufacture and of required shade on decorated wall surface to give an even shade after thoroghly brushing the surface clean of all grease, dirt, loose pieces of scales and also including preparing the surface even and sand papering smooth, as per direction of the Engineer-in-Charge, including carriage of material within all leads, lifts and other incidental. The rate is including octroi, royality, Malkana, toll tax, GST or other taxes imposed by the Government.. |
| 15 | Painting Steel work with Deluxe Multi Surface Paint to give an even shade. Two or more coat applied at the rate of 0.90 ltr/ 10 sqm (zero decimal nine zero litre per ten square metre) over an under coat of primer applied at the rate 0.80 ltr/ 10 sqm (zero decimal eight zero litre per ten square metre) of approved brand and manufacture as per direction of the Engineer-in-Charge, including carriage of material within all leads, lifts and other incidental.The rate is including royality , octroi, GST, Toll tax, malkana and all other taxes as imposed by the Government. |
| 16 | Lettering with black Japan paint of approved brand and manufacture, as per direction of the Engineer-in-Charge, including carriage of material within all leads, lifts and other incidental. The rate is including octroi, royality, malkana, toll tax, GST or other taxes imposed by the Government. Please Enable Macros to View BoQ information |
