|
| 1 | Material and labour for Preparation of old decorated surfaces (plastered/unplastered) of walls/pillars /cornices by remove / scraping down all smoke soot, moulds, moss & efflorescent salts, oil & greasy spots etc with using steel patti/wirebrush/broom/ mechanical sander machine (including provision of dust sucking), upto entire satisfaction of Engineer-in-charge, and after preparing the surface smooth applying one coat of lime white wash with using paint brush complete all as specified and as directed . |
| 2 | Material and labour for Preparation of old decorated surfaces (plastered/unplastered) of ceiling by remove / scraping down all smoke soot, moulds, moss & efflorescent salts, oil & greasy spots etc with using steel patti/wirebrush/broom/ mechanical sander machine (including provision of dust sucking), upto entire satisfaction of Engineer-in-charge, and after preparing the surface smooth applying one coat of lime white wash with using paint brush complete all as specified and as directed . |
| 3 | Material and labour for preparation of old painted wooden surfaces of any description not otherwise described over 10cm width or girth & applying one coat of synthetic enamel paint (1st quality) of approved tint/colour to achieve glossing finish complete as specified and as directed as per existing or as approved tint/colour complete all as specified and as directed. |
| 4 | Material and labour for preparation of old painted steel surfaces of any description not otherwise described over 10cm width or girth & applying one coat of synthetic enamel paint (1st quality) of approved tint/colour to achieve glossing finish complete as specified and as directed as per existing or as approved tint/colour complete all as specified and as directed. |
| 5 | Material and labour for Preparation of old decorated surfaces (plastered/unplastered) of walls/pillars /cornices by remove / scraping down all smoke soot, moulds, moss & efflorescent salts, oil & greasy spots etc with using steel Patti/wire brush/broom/ mechanical sander machine (including provision of dust sucking), up to entire satisfaction of Engineer-in-charge, and after preparing the surface smooth applying with wall care putty and one coat of Acrylic emulsion distemper with using paint brush, as per existing or as approved tint/colour complete all as specified and as directed . |
| 6 | Material and labour for Preparation of old decorated surfaces (plastered/unplastered) of ceilings by remove / scraping down all smoke soot, moulds, moss & efflorescent salts, oil & greasy spots etc with using steel Patti/wire brush/broom/ mechanical sander machine (including provision of dust sucking), up to entire satisfaction of Engineer-in-charge, and after preparing the surface smooth applying and one coat of Acrylic emulsion distemper with using paint brush, as per existing or as approved tint/colour complete all as specified and as directed. |
| 7 | Material and labour for Preparation of surfaces and applying one coats of exterior emulsion paint (light shade) with highlighter of any approved shade, @ 5 sqm/litre/2 coats by using roller to external walls/RCC surfaces/soffits of chajjas/roof projections/cantilevers/balcony etc surfaces over & including a coat of exterior wall primer @ 11 sqm/litre/1 coat as recommended all as specified and as directed. |
| 8 | Material and labour for Preparation of old decorated surfaces (plastered/unplastered) of walls/pillars /cornices by remove / scraping down all smoke soot, moulds, moss & efflorescent salts, oil & greasy spots etc with using steel Patti/wire brush/broom/ one coat of weather coat terracotta paint over wall or floor/ MP tiles surfaces including the preparation of the surfaces, complete all as specified and directed. |
| 9 | Taking down cement or cement lime plaster of any description on brick or stone walls, ceilings etc. including raking out joints, hacking for key, scrubbing down with water, etc all as specified and as directed. |
| 10 | M&L for Rendering 15mm thick on fair faces of brick work or concrete surfaces in CM 1:4 including finished the surface even and smooth with out using extra cement complete all as specified and directed. |
| 11 | M&L for rendering 10mm thick on fair face of brick work or concrete surface in CM 1:6 including finished the surface even and smooth with out using extra cement complete all as specified and directed. |
| 12 | M&L for rendering 5mm thick on fair face of brick work or concrete surface in CM 1:3 including finished the surface even and smooth with out using extra cement complete all as specified and directed. |
| 13 | Material and labour for Preparation of new plastered surfaces of ceiling , and after preparing the surface smooth applying two coat of Acrylic emulsion distemper over a coat of primer with using paint brush, as per existing or as approved tint/colour complete all as specified and as directed |
| 14 | M&L for applying required coat of wall care putty on wall, surface as even and smooth finish complete all as specified and directed. |
| 15 | Material and labour for Preparation of new plastered surfaces of wall and after preparing the surface smooth applying two coat of Acrylic emulsion distemper over a coat of primer with using paint brush, as per existing or as approved tint/colour complete all as specified and as directed. |
| 16 | Material and labour for Preparation of surfaces and applying 02 coats of exterior emulsion paint (light shade) with highlighter of any approved shade, @ 5 sqm/litre/2 coats by using roller to external walls/RCC surfaces/soffits of chajjas/roof projections/cantilevers/balcony etc surfaces over & including a coat of exterior wall primer @ 11 sqm/litre/1 coat all as specified and as directed. |
| 17 | Obliterating old writing of any description, not exc 0.1 Sqm with paint to match existing work complete all as specified and as directed. |
| 18 | M&L for french polishing one or more coat on old decorated surfaces of any description, any width or girth including clearing and preparing the surfaces of old works etc complete all as specified and directed |
| 19 | M&L for removing wood growth including complete removal of penetrated root parts and applying standard anti weed solution as per manufacturer's instruction any position up to and including four storied building on wall, roof etc complete all as specified and directed. |
| 20 | Material and labour for Preparation of old decorated surfaces (plastered/unplastered) of walls/pillars /cornices by remove / scraping down all smoke soot, moulds, moss & efflorescent salts, oil & greasy spots etc with using steel Patti/wire brush/broom/ mechanical sander machine (including provision of dust sucking), up to entire satisfaction of Engineer-in-charge, and after preparing the surface smooth applying one coat of cement base paint with using paint brush as per existing or as approved tint/colour complete all as specified and as directed . |
| 21 | Complete removal of existing treatment on walls with wire brush and wash down with water including stopping to holes and surface as smooth complete all as specified and directed. |
| 22 | M&L for preparation of existing wall surfaces and applying two coats of Acrylic emulsion distemper over a coat of primer complete all as specified and directed |
| 23 | Material and labour for Preparation of surfaces and applying 02 coats of exterior emulsion paint (light shade) with highlighter of any approved shade, @ 5 sqm/litre/2 coats by using roller to external walls/RCC surfaces/soffits of chajjas/roof projections/cantilevers/balcony etc surfaces over & including a coat of exterior wall primer @ 11 sqm/litre/1 coat using air less spray technology with maximum working pressure of 3300PSI and capable of operating single spray gun of length 30m for executing the work wherever is required complete all as specified and directed |
| 24 | M&L for double scaffolding(without disturbing the existing wall) for applying minimum two coat of exterior emulsion weather coat paint on walls complete all as specified and directed. Note : (i) The building considered in this item is G+2 storey and above (ii) Scaffolding will be measured only one time and one face for particular place of work including all finishes. Please Enable Macros to View BoQ information |
