Tender For Construction Of State Of The Art Model Drug De-Addiction Centre And Rehabilitation Centre At Kotla Barog Tehsil Pachhad Distt. Sirmour H.P (Sh:- Construction Of Civil Work, W/S & Si Work, Septic Tank, Rain Harvesting Tank, Soak Pit And Sit, Sarahan-Himachal Pradesh

TDR : 54806484

Tender Notice
Corrigendum Details
BOQ

Expired

Sarahan , Himachal Pradesh

Tender Brief : Corrigendum : Tender For Construction Of State Of The Art Model Drug De-Addiction Centre And Rehabilitation Centre At Kotla Barog Tehsil Pachhad Distt. Sirmour H.P (Sh:- Construction of Civil Work, W/S & Si Work, Septic Tank, Rain Harvesting Tank, Soak Pit And Sit

Document Fees
₹ 40000 /-

EMD
₹ 4444200.0 /-

Tender Value
Refer document

Submission Date
01-04-2026

Competition Type
Indian

Bidding Type
Tender

Need a Business Loan? Apply Now !

Sr No	Corrigendum Date	Corrigendum	Type	New Submission Date
1	29-03-2026	Date	Date	01-04-2026
2	27-03-2026	Condition	Other	01-04-2026
3	27-03-2026	Condition	Other	30-03-2026

Name of Work:- Construction of State of the Art Model Drug De-Addiction Centre and Rehabilitation Centre at Kotla Barog Tehsil Pachhad Distt. Sirmour H.P (SH:- C/O Civil work, W/S & SI work, Septic tank, Rain Harvesting Tank, Soak Pit and Site Development etc.)

Sl. No.	Item Description
1	Earth work in excavation by mechanical means (Hydraulic excavator) / manual means in foundation trenches or drains including dressing of sides and ramming of bottoms, lift upto any height, including getting out the excavated soil and disposal of surplus excavated soil within all leads & lifts.In all kinds of soil and sorting useful and un useful material and transportation by the un- useful material for dispring at dumping site (to be arrangend by the contractor) as on stasifaction of Engineer -in charge including all modes of transportation i/c head load animal load or material means along with its levelling fine dressing and with all kinds of labour,machinries,tools equipment and safety measures and incidential necessary to complete the work by mechanical means and labour (if required) .any lose to the puplic and private property during the course of excavation and disposal of serviceable and un serviceable material shall be the absolute resposibilty by the contractor and shall have to be duly compensated by him in all respect i/c all incidential charges.
2	Supplying and filling in plinth with sand under floors, including watering, ramming, consolidating and dressing complete. including carriage of all labour equipments and materials to various location through all modes of transportation upto all leads, lifts and other incidential charges.
3	Providing form work with steel plates 3.15mm(three point one five millimetre) thick welded with angle iron in frame 30x30x5mm ,so as to give a fair finish including centring ,shuttering ,strutting and propping etc. with wooden battens and ballies , height of propping and centring below supporting floor to ceiling up to all heights and removal of the same for insitu-reinforced concrete & plain concrete work inCentering and shuttering including strutting, propping etc and removal of the form for Foundation footing and basis of columns, etc. and mass concrete. including carriage of all labour equipments and materials to various location through all modes of transportation upto all leads, lifts and other incidential charges.
4	Providing form work with steel plates 3.15mm(three point one five millimetre) thick welded with angle iron in frame 30x30x5mm ,so as to give a fair finish including centring ,shuttering ,strutting and propping etc. with wooden battens and ballies , height of propping and centring below supporting floor to ceiling up to all heights and removal of the same for insitu-reinforced concrete & plain concrete work inCentering and shuttering including strutting, propping etc and removal of the form for Walls (any thickness) including attached pilasters, butteresses, plinth and string courses etc.including carriage of all labour equipments and materials to various location through all modes of transportation upto all leads, lifts and other incidential charges.
5	Providing form work with steel plates 3.15mm(three point one five millimetre) thick welded with angle iron in frame 30x30x5mm ,so as to give a fair finish including centring ,shuttering ,strutting and propping etc. with wooden battens and ballies , height of propping and centring below supporting floor to ceiling up to all heights and removal of the same for insitu-reinforced concrete & plain concrete work inCentering and shuttering including strutting, propping etc and removal of the form for Flat surfaces such as soffits of suspended floors, roofs, landings and the like :including carriage of all labour equipments and materials to various location through all modes of transportation upto all leads, lifts and other incidential charges.
6	Providing form work with steel plates 3.15mm(three point one five millimetre) thick welded with angle iron in frame 30x30x5mm ,so as to give a fair finish including centring ,shuttering ,strutting and propping etc. with wooden battens and ballies , height of propping and centring below supporting floor to ceiling up to all heights and removal of the same for insitu-reinforced concrete & plain concrete work inCentering and shuttering including strutting, propping etc and removal of the form for Lintels, beams, plinth beams, girders, bressumers and cantilevers including carriage of all labour equipments and materials to various location through all modes of transportation upto all leads, lifts and other incidential charges.
7	Providing form work with steel plates 3.15mm(three point one five millimetre) thick welded with angle iron in frame 30x30x5mm ,so as to give a fair finish including centring ,shuttering ,strutting and propping etc. with wooden battens and ballies , height of propping and centring below supporting floor to ceiling up to all heights and removal of the same for insitu-reinforced concrete & plain concrete work inCentering and shuttering including strutting, propping etc and removal of the form for Columns, Pillars, Piers, Abutments, Posts and Struts including carriage of all labour equipments and materials to various location through all modes of transportation upto all leads, lifts and other incidential charges.
8	Providing form work with steel plates 3.15mm(three point one five millimetre) thick welded with angle iron in frame 30x30x5mm ,so as to give a fair finish including centring ,shuttering ,strutting and propping etc. with wooden battens and ballies , height of propping and centring below supporting floor to ceiling up to all heights and removal of the same for insitu-reinforced concrete & plain concrete work inCentering and shuttering including strutting, propping etc and removal of the form for Stairs, (excluding landings) except spiral staircases including carriage of all labour equipments and materials to various location through all modes of transportation upto all leads, lifts and other incidential charges.
9	Providing form work with steel plates 3.15mm(three point one five millimetre) thick welded with angle iron in frame 30x30x5mm ,so as to give a fair finish including centring ,shuttering ,strutting and propping etc. with wooden battens and ballies , height of propping and centring below supporting floor to ceiling up to all heights and removal of the same for insitu-reinforced concrete & plain concrete work inCentering and shuttering including strutting, propping etc and removal of the form forEdges of slabs and break in floors and walls :-Under 20cm wide :-including carriage of all labour equipments and materials to various location through all modes of transportation upto all leads, lifts and other incidential charges.
10	Providing and laying cement concrete 1:6:12 (1 cement : 6 coarse sand: 12 graded stone aggregate 40 mm nominal size) mechnical mixed and curing complete excluding cost of centring and shuttering in Foundation and plinth as required complete including carriage of all labour equipments and materials to various location through all modes of transportation upto all leads, lifts and other incidential charges.
11	Providing and laying cement concrete 1:4:8 (1 Cement : 4 coarse sand : 8 gradedstone aggregate 40 mm nominal size) mechnical mixed and curing complete excluding cost of centring and shuttering in Foundation and plinthas required complete including carriage of all labour equipments and materials to various location through all modes of transportation upto all leads, lifts and other incidential charges.
12	Providing and laying in position machine batched and machine mixed design mix M-30 grade cement concrete for reinforced cement concrete work, using cement content as per approved design mix, including pumping of concrete to site of laying but excluding the cost of centering, shuttering, finishing and reinforcement,including admixtures in recommended proportions as per IS: 9103 to accelerate, retard setting of concrete,improve workability without impairing strength and durability as per direction of Engineer-in-charge.All works upto plinth levelincluding carriage of all labour equipments and materials to various location through all modes of transportation upto all leads, lifts and other incidential charges.
13	Providing and laying in position machine batched and machine mixed design mix M-30 grade cement concrete for reinforced cement concrete work, using cement content as per approved design mix, including pumping of concrete to site of laying but excluding the cost of centering, shuttering, finishing and reinforcement,including admixtures in recommended proportions as per IS: 9103 to accelerate, retard setting of concrete,improve workability without impairing strength and durability as per direction of Engineer-in-charge.All works above plinth level upto floor all level including carriage of all labour equipments and materials to various location through all modes of transportation upto all leads, lifts and other incidential charges.
14	Providing and laying in position machine batched and machine mixed design mix M-25 grade cement concrete for reinforced cement concrete work, using cement content as per approved design mix, including pumping of concrete to site of laying but excluding the cost of centering, shuttering, finishing and reinforcement,including admixtures in recommended proportions as per IS: 9103 to accelerate, retard setting of concrete,improve workability without impairing strength and durability as per direction of Engineer-in-charge. All works upto plinth level including carriage of all labour equipments and materials to various location through all modes of transportation upto all leads, lifts and other incidential charges.
15	Providing and laying in position machine batched and machine mixed design mix M-25 grade cement concrete for reinforced cement concrete work, using cement content as per approved design mix, including pumping of concrete to site of laying but excluding the cost of centering, shuttering, finishing and reinforcement,including admixtures in recommended proportions as per IS: 9103 to accelerate, retard setting of concrete,improve workability without impairing strength and durability as per direction of Engineer-in-charge.All works above plinth level upto floor all level including carriage of all labour equipments and materials to various location through all modes of transportation upto all leads, lifts and other incidential charges.
16	Providing and laying upto all floor levels cement concrete work 1:1½:3 (1 cement : 1½ sand : 3 graded stone aggregate 20mm nominal size) to give smooth and even surface including centring and shuttering but excluding cost of reinforcement and curing complete mechanical mixed and vibrated for compecting reinforced concrete upto floor all level including carriage of materials in all leads and lifts:-Moulding as in cornices, window sills etc. exceeding 15cm in girth. including carriage of all labour equipments and materials to various location through all modes of transportation within all leads, lifts and other incidential charges.String courses, copings, bed plates, anchor blocks, plain windows sills and the like :including carriage of all labour equipments and materials to various location through all modes of transportation upto all leads, lifts and other incidential charges.
17	Providing and laying upto all floor levels cement concrete work 1:1½:3 (1 cement : 1½ sand : 3 graded stone aggregate 20mm nominal size) to give smooth and even surface including centring and shuttering but excluding cost of reinforcement and curing complete mechanical mixed and vibrated for compecting reinforced concrete upto floor all level including carriage of materials in all leads and lifts:-Moulding as in cornices, window sills etc. exceeding 15cm in girth. including carriage of all labour equipments and materials to various location through all modes of transportation within all leads, lifts and other incidential charges.Moulding as in cornices window sills etc. not exceeding 15cm in girth.including carriage of all labour equipments and materials to various location through all modes of transportation within all leads, lifts and other incidential charges.
18	Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete upto all floor level Thermo-Mechanically Treated bars of gradeFe-500D or more. including carriage of all labour equipments and materials to various location through all modes of transportation upto all leads, lifts and other incidential charges.
19	Applying cement slurry on R.C.C slab or cement concrete work using 2.75 Kg of cement per square meter of floor area before laying cement concrete flooring including roughening, cleaning of the concrete surfaces complete including carriage of all labour equipments and materials to various location through all modes of transportation upto all leads, lifts and other incidential charges.
20	Providing Smooth finishing of the exposed surface of R.C.C. work with 6 mm thick cement mortar 1:3 (1 Cement : 3 fine sand).including carriage of all labour equipments and materials to various location through all modes of transportation upto all leads, lifts and other incidential charges.
21	Providing and laying water proofing treatment with Dr. Fixit-FASTFLEX or equivalent with two components polymer modified cementitious coating consisting of cementitious powder and a polymer liquid in two coats for first coat:- clean and saturate surface and then applying a coat of Dr. Fixit -FASTFLEX by maintaning a coverage of 6-7 sft per kg to achive one mm thickness and the same process shalltended upto 300 mm vertically. The second coat shall be applied in opposite direction after four six-hours of application of first coat then sprinkle sand on top surface of applied Dr. Fixit-FASTFLEX while still tacky over the second coat. Then apply cement mortar 1 : 4 ( 1 cement : 4 sand) admioxed with 200 ml of pidiproof LW @ 200ml per 50 kg bag of cement over the floor with the suitable grediant towards drain pipe, while the second coat of Dr. Fixit is still tacky complete upto all floor levels including carriage of all labour equipments and materials to various location through all modes of transportation upto all leads, lifts and other incidential charges.
22	Providing and filling polyersterene backer rod prime the two sides of properly prepared joiint surfaces witrh pidy prime a (with brush the pisy prime joints shall be filled with Dr. FIXIT polysulphied sealent 42 P and vertical joints with Dr. FIXIT polysulphyde sealent 41 VG) in expension joints of wall and floor complete as per speciofication and instruction of Engineer-in-charge.including carriage of all labour equipments and materials to various location through all modes of transportation upto all leads, lifts and other incidential charges.
23	Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5in:Cement mortar 1:6 (1 cement : 6 coarse sand) in foundation and plinth including carriage of all labour equipments and materials to various location through all modes of transportation upto all leads, lifts and other incidential charges.
24	Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in superstructure in : Cement mortar 1:6 (1 cement : 6 coarse sand)above plinth level up to floor V level in all shapes and sizes including carriage of all labour equipments and materials to various location through all modes of transportation within all leads, lifts and other incidential charges.
25	Half brick masonry with common burnt clay F.P.S. (non modular) bricks cement mortar 1:4 (1 cement : 4 coarse sand)of class designation 7.5 in foundation and plinth. including carriage of all labour equipments and materials to various location through all modes of transportation within all leads, lifts and other incidential charges.
26	Half brick masonry with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in superstructure above plinth level up to all floor level. cement mortar 1:4 (1 cement : 4 coarse sand)including carriage of all labour equipments and materials to various location through all modes of transportation upto all leads, lifts and other incidential charges.
27	Rat Trap Brick masonry(laid on edge) with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in foundation and plinth. .cement mortar 1:4 (1 cement : 4 coarse sand)including carriage of all labour equipments and materials to various location through all modes of transportation upto all leads, lifts and other incidential charges
28	Boulder filling tightly hand packed under floor including watering, ramming, consolidating etc. including carriage of all labour equipments and materials to various location through all modes of transportation upto all leads, lifts and other incidential charges
29	Providing and fixing Powder coated aluminium (minimum thickness of powder coating 50 micron) work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing / paneling, C.P. brass / stainless steel screws, all complete as per architectural drawings and the directions of Engineer-incharge. (Glazing, paneling and dash fasteners to be paid for separately) : for frames of door and window including carriage of all labour equipments and materials to various location through all modes of transportation upto all leads, lifts and other incidential charges
30	Providing and fixing Powder coated aluminium (minimum thickness of powder coating 50 micron) work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing / paneling, C.P. brass / stainless steel screws, all complete as per architectural drawings and the directions of Engineer-incharge. (Glazing, paneling and dash fasteners to be paid for separately) for Shutter of door and windowi/c hinges and making provision for fixing fitting including carriage of all labour equipments and materials to various location through all modes of transportation upto all leads, lifts and other incidential charges. :
31	Providing and fixing 12 mm thick PHENOL BONDED prelaminated particle board flat pressed three layer or graded wood particle board conforming to IS: 12823 Grade l Type ll, in panelling fixed in aluminum doors, windows shutters and partition frames with C.P. brass / stainless steel screws etc. complete as per architectural drawings and directions of engineer- in-charge.Pre-laminated particle board with decorative lamination on both sides including carriage of all labour equipments and materials to various location through all modes of transportation upto all leads, lifts and other incidential charges
32	Providing and fixing glazing in aluminium door, window,ventilator shutters and partitions etc. with EPDM rubber / neoprene gasket etc. complete as per the architectural drawings and the directions of engineer-in-charge .(Cost of aluminium snap beading shall be paid in basic items With float glass panes of 6 mm thickness (weight not less than 15.00 kg/ sqm) including carriage of all labour equipments and materials to various location through all modes of transportation upto all leads, lifts and other incidential charges
33	Providing and fixing glazing in aluminium door, window,ventilator shutters and partitions etc. with EPDM rubber / neoprene gasket etc. complete as per the architectural drawings and the directions of engineer-in-charge .(Cost of aluminium snap beading shall be paid in basic itemsWith 21mm thick DGU 6 mm thick clear toughned glass outer side and 5.0mm thick inside, having 10 mm air gap, including providing EPDM gasket,perforated aluminium spacers, desiccants, sealant (Both primary and secondary sealant) etc. as per specifications, drawings and direction of Engineer-incharge complete.
34	Providing and fixing double glazed hermetically sealed glazing in aluminium windows, ventilators and partition etc. with 6 mm thick clear float glass both side, having 12 mm air gap, including providing EPDM gasket, perforated aluminium spacers, desiccants, sealant (Both primary and secondary sealant) etc. as per specifications, drawings and direction of Engineer-incharge complete.including carriage of all labour equipments and materials to various location through all modes of transportation upto all leads, lifts and other incidential charges
35	Providing & fixing fly proof wire gauze to windows,clerestory windows & doors with M.S. Flat 15x3 mm and nuts & bolts complete.Stainless steel (grade 304) wire gauze of 0.5 mm dia wire and 1.4 mm aperture on both sides including carriage of all labour equipments and materials to various location through all modes of transportation upto all leads, lifts and other incidential charges.
36	Providing and fixing powder coated anodised aluminium grill (anodised transparent or dyed to required shade according to IS: 1868 with minimum anodic coating of grade AC 15) of approved design/pattern, with approved standard section and fixed to the existing window frame with C.P. brass/ stainless steel screws @ 200 mm centre to centre, including cutting the grill to proper opening size for fixing and operation of handles and fixing approved anodised aluminium standard section arround the opening, all complete as per requirement and direction of Engineerin-charge. (Only weight of grill to be measured for payment).including carriage of all labour equipments and materials to various location through all modes of transportation upto all leads, lifts and other incidential charges
37	Providing and fixing M.S. grills of required pattern in frames of windows etc. with M.S. flats, square or round bars etc. including priming coat with approved steel primer all complete Fixed to steel windows by welding including carriage of all labour equipments and materials to various location through all modes of transportation within all leads, lifts and other incidential charges.
38	Providing and fixing 40 mm thick 2nd class Deodar wood panelled or panelled and glazed shutters for doors, windows and clerestory windows fixing with butt hinges of required size with necessary screws, excluding panelling which will be paid for separately, all complete as per direction of Engineer-incharge including carriage of all labour equipments and materials to various location through all modes of transportation within all leads, lifts and other incidential charges.
39	Providing and fixing panelling or panelling and glazing in panelled or panelled and glazed shutters for doors,windows and clerestory windows (Area of opening for panel inserts excluding portion inside grooves or rebatesto be measured). Panelling for panelled or panelled andglazed shutters 25 mm to 40 mm thickPre-laminated particle board 12 mm thick with decorative lamination on both sides, Grade I, Type II, IS:12823 marked including carriage of all labour equipments and materials to various location through all modes of transportation within all leads, lifts and other incidential charges.
40	Providing and fixing glazed shutters for doors, windows and clerestory windows using 21 mm thick DGU (5+10+6) with reflective glass panes, including ISI marked M.S. pressed butt hinges bright finished of required size with necessary screws including carriage of all labour equipments and materials to various location through all modes of transportation within all leads, lifts and other incidential charges.
41	Providing and fixing wire gauge shutters using galvanized M.S. wire gauge of average width of aperture 1.4 mm in both directions with wire of dia 0.63 mm, for doors, windows and clerestory windows with hinges and necessary screws :40 mm thick 2nd class deodar woodincluding carriage of all labour equipments and materials to various location through all modes of transportation upto all leads, lifts and other incidential charges
42	Providing and fixing 19 mm thick commercial board water proof shutter for cup boards including fixing with nickel plated piano hinges with screws etc. complete including carriage of all labour equipments and materials to various location through all modes of transportation upto all leads, lifts and other incidential charges
43	Providing and fixing 19 mm thick commercial board water proof in shelves, lining, box for cup boards with butt joints fixed with nails and screws etc complete including carriage of all labour equipments and materials to various location through all modes of transportation upto all leads, lifts and other incidential charges
44	Providing and fixing 6 mm thick ply wood lining with butt jointing and nails. Framework and cover fillet to be measured and paid for separately.including carriage of all labour equipments and materials to various location through all modes of transportation upto all leads, lifts and other incidential charges
45	Providing & Fixing decorative high pressure laminated sheet of plain / wood grain in gloss / matt/ suede finish with high density protective surface layer and reverse side of adhesive bonding quality conforming to IS : 2046 Type S, including cost of adhesive of approved quality.1.0 mm thick as per directions of Engineer- in-charge.
46	Providing and fixing square edges 1st class deodar wood lipping / cover fillets beading 19mmx6mm section including mitring junction with wood screws and nails complete as per directions of Engineer- in-charge.
47	Providing and fixing powder coated telescopic drawer channels 300 mm long with necessary screws etc.complete as per directions of Engineer- in-charge.
48	Providing and fixing sliding arrangement in racks/ cupboards/cabinets shutter by with stainless steel rollers to run inside C or E aluminium channel section (The payment of C or E channel shall be made separately)including carriage of all labour equipments and materials to various location through all modes of transportation upto all leads, lifts and other incidential charges
49	Providing and fixing 0.63mm thick P.G.I sheet lining (back side of toilet/SDB shutter) with approved adhesive and necessary screws etc. complete including carriage of materials in all leads and lifts :-.
50	Providing and fixing 15 mm thick Glass Fibre reinforced gypsum (GRG) perforated tabular edge tile 60X60 cm in ceiling, mounted on powder coated G.I frame work fixed/hanging with wall or ceiling etc. with specified clamps and G.I. wires and rawl plugs etc. including carriage of material in all leads and lifts complete as per the direction of Engineer-in Charge including carriage of material in all leads and lifts.
51	Providing and fixing 4.00 mm thick all weather proof ACP imported Sign Panel all weather proof multi colour computerised reflective digitat panel 3mm thick, mounted on powder coated G.I frame work fixed/hanging with wall or ceiling etc. with specified clamps and G.I. wires and rawl plugs etc. including carriage of material in all leads and lifts complete as per the direction of Engineer-in Charge including carriage of material in all leads and lifts.
52	Providing and Fixing 20 mm thick wood wool tile of Dexune/Himalayan preload acoustic Panel of size 1220x610 coloured panel as per desire finish, premium squre edge in wall panneling. Panels are made of pine wood fiber containing cellulose binded with magnesite. The panel will be screw fixed @ 200 mm on G.I metal frame of 50x50 mm making a grid of 610x610 mm c/c. The frame is to be made in proper line after leveling. The panel will be backed with 50 mm Rock wool of 48.00 kg / Cum inserted inside the grid of 610x610 mm which will comprise of minimum NRC 0.90 as per ISW 8225/ISO :354/ASTM:423-90a. The panel meets the the stringent fire test required having Class P rating for Ignitability test as per BS476 part 5 and class 1 rating as per BS 476 part 7 for surface spread of flame test class p and class 1 are the highest rating. BS 476 Part 6 fire propagation index 1= not greater than 4.11. Panel shall be spray painted with choice colour for final finish.including carriage of all labour equipments and materials to various location through all modes of transportation upto all leads, lifts and other incidential charges
53	Providing and fixing thermal insulation with Resin Bonded rock wool conforming to IS: 8183, having density 48 kg / m3, 30 mm thick,wrapped in 200 G Virgin Polythene Bags fixed/filled in cavity of brick wall with screw, rawel plug & washers and held and in position by criss cossing GI wire etc. complete as per directions of Engineer-inCharge
54	Providing and fixing 20 mm dia chromium plated brass curtain rod having wall thickness of 1.25mm with two chromium plated brass brackets fixed with C.P. brass screws and PVC sleeves etc., wherever necessaryincluding carriage of material in all leads and lifts complete as per the direction of Engineer-in Charge including carriage of material in all leads and lifts. complete :
55	Providing and fixing Aluminium sliding door bolts with bolts and nuts etc. 300 X 16 mm ( three hundred into sixteen milimetre ) including carriage of material in all leads and lifts complete as per the direction of Engineer-in Charge including carriage of material in all leads and lifts.
56	Providing and fixing Aluminium sliding door bolts with bolts and nuts etc. 250 X 16 mm ( two hundred fifty into sixteen milimetre ) including carriage of material in all leads and lifts complete as per the direction of Engineer-in Charge including carriage of material in all leads and lifts.
57	Providing and fixing Aluminium tower bolts (Berrel type)250 X 10 mm (Two hundred fifty into ten milimetre ) transparent or dyed to required shade and colour with screws etc. complete including carriage of materials in all leads and lifts:-
58	Providing and fixing Aluminium tower bolts (Berrel type) 200 X 10 mm ( two hundred into ten milimetre)transparent or dyed to required shade and colour with screws etc. complete including carriage of materials in all leads and lifts:-
59	Providing and fixing Aluminium tower bolts (Berrel type)150 X 10 mm (one hundred fifty into ten milimetre)transparent or dyed to required shade and colour with screws etc. complete including carriage of materials in all leads and lifts:-
60	Providing and fixing Aluminium tower bolts (Berrel type) 100 X 10 mm ( one hundred into ten milimetre) transparent or dyed to required shade and colour with screws etc. complete including carriage of materials in all leads and lifts:-
61	Providing and fixing Powder coated Aluminium handles size 125 mm ( one hundred twenty five milimetre) transparent or dyed to required colour or shade with necessary screws etc. complete including carriage of materials in all leads and lifts :-
62	Providing and fixing Powder coated Aluminium handles size 100 mm ( one hundred milimetre) transparent or dyed to required colour or shade with necessary screws etc. complete including carriage of materials in all leads and lifts :-
63	Providing and fixing Powder coated Aluminium handles size 75 mm ( seventy five milimetre ) transparent or dyed to required colour or shade with necessary screws etc. complete including carriage of materials in all leads and lifts :-
64	Providing & fixing Stainless steel hanging floor door stopper ISI marked with transparent or dyed to required shade and colour with screws etc.Twin Rubber stopper completeto suit shutter thickness complete including carriage of materials in all leads and lifts :-
65	Providing and fixing aluminium die cast body tubular type universal hydraulic door closer (having brand logo with ISI, IS : 3564, embossed on the body, door weight upto 35 kg and door width upto 700 mm), with necessary accessories and screws etc. complete.
66	Providing and fixing 65x35mm special quality bright finished brass cupboard or ward robe locks with six levers of approved quality including necessary screws etc.complete.including carriage of material in all leads and lifts complete as per the direction of Engineer-in Charge including carriage of material in all leads and lifts.
67	Providing and fixing 50 mm ( fifty milimetre)CP brass cup board or ward robe knob with nuts complete.including carriage of material in all leads and lifts complete as per the direction of Engineer-in Charge including carriage of material in all leads and lifts.
68	Providing and fixing magnetic catcher of approved quality in cupboard/ward robe shutters, including fixing with necessary screws etc. complete. :Double strip (horizontal type)including carriage of materials in all leads and lifts
69	Providing and fixing Brass 100mm mortice latch and lock with 6 levers without pair of handles (best make of approved quality) for aluminium doors including necessary cutting and making good etc. complete.including carriage of material in all leads and lifts complete as per the direction of Engineer-in Charge including carriage of material in all leads and lifts.
70	Providing and fixing 200 mm ( two hundred milimetre)Aluminium hooks and eyes :including carriage of material in all leads and lifts complete as per the direction of Engineer-in Charge including carriage of material in all leads and lifts.
71	Providing & fixing 115 mm bright finished brass hasps and stapples (safety type)with necessary screws including carriage of materials in all leads and lifts :-
72	Providing & fixing 150 mm Stainless steel single acting spring hinges bright finished with necessary screws etc. complete including carriage of materials in all leads and lifts
73	Providing & fixing 150 mm Stainless steel double acting spring hinges bright finished with necessary screws etc. complete including carriage of materials upto all leads and lifts
74	P/L Exterior grade maxgrip antiskid vitrified tiles (Premium quality matt finish of size 600x600mm / 600x1200 mm conforming to IS: 15622, of approved make, in all colours and shades, laid on 20mm thick cement mortar 1:4 (1 cement : 4 coarse sand), jointing with grey cement slurry @ 3.3 kg/ sqm including pointing the joints with white cement and matching pigment etc complete including carriage of all labour equipments and materials to various location through all modes of transportation upto all leads, lifts and other incidential charges
75	Providing and laying Polished Granite stone flooring in required design and patterns, in linear as well as curvilinear portions of the building all complete as per the architectural drawings with 18 mm thick stone slab over 20 mm (average) thick base of cement mortar 1:4 (1cement : 4 coarse sand) laid and jointed with cement slurry and pointing with white cement slurry admixed with pigment of matching shade including rubbing ,curing and polishing etc. all complete as specified and as directed by the Engineer-in-Charge.
76	P/F Polished Granite work gang saw cut (polished and machine cut) of thickness 18 mm for wall lining (veneer work), backing filled with a grout of average 12 mm thick in cement mortar 1:3 (1 cement : 3 coarse sand), including pointing with white cement mortar 1:2 (1 white cement : 2 marble dust) with an admixture of pigment to match the marble shade (To be secured to the backing by means of cramps, which shall be paid for separately.including carriage of all labour equipments and materials to various location through all modes of transportation upto all leads, lifts and other incidential charges
77	P/F Full body vitrified floor tiles(Premium quality of size 600x600 mm conforming to IS: 15622, of approved make, in all colours and shades, laid on 20mm thick cement mortar 1:4 (1 cement : 4 coarse sand), jointing with grey cement slurry @ 3.3 kg/ sqm including pointing the joints with white cement and matching pigment etc complete including carriage of material in all leads and lifts complete as per the direction of Engineer-in Charge including carriage of material up to all leads and lifts.
78	P/F Full body vitrified floor tiles (Premium quality matt finish of size 600x600mm conforming to IS: 15622, of approved make, in all colours and shades, in skirting fixed over 12mm thick cement mortar 1:3 (1 cement : 3 coarse sand), jointing with grey cement slurry @ 3.3 kg/ sqm including pointing the joints with white cement and matching pigment etc complete. including carriage of material in all leads and lifts complete as per the direction of Engineer-in Charge including carriage of material upto all leads and lifts.
79	P/L Glazed vitrified floor tiles (Premium quality of size 600x600 mm conforming to IS: 15622, of approved make, in all colours and shades, laid on 20mm thick cement mortar 1:4 (1 cement : 4 coarse sand), jointing with grey cement slurry @ 3.3 kg/ sqm including pointing the joints with white cement and matching pigment etc complete including carriage of material in all leads and lifts complete as per the direction of Engineer-in Charge including carriage of material upto all leads and lifts.
80	P/F Glazed vitrified floor tiles (Premium quality matt finish of size 600x600mm conforming to IS: 15622, of approved make, in all colours and shades, in skirting fixed over 12mm thick cement mortar 1:3 (1 cement : 4 coarse sand), jointing with grey cement slurry @ 3.3 kg/ sqm including pointing the joints with white cement and matching pigment etc complete. including carriage of material in all leads and lifts complete as per the direction of Engineer-in Charge including carriage of material upto all leads and lifts.
81	P/L Double charged vitrified floor tiles 600x600 mm conforming to IS: 15622, of approved make, in all colours and shades, laid on 20mm thick cement mortar 1:4 (1 cement : 4 coarse sand), jointing with grey cement slurry @ 3.3 kg/ sqm including pointing the joints with white cement and matching pigment etc complete including carriage of all labour equipments and materials to various location through all modes of transportation upto all leads, lifts and other incidential charges
82	P/F Double charged vitrified floor tiles of size 600x600mm conforming to IS: 15622, of approved make, in all colours and shades, in skirting fixed over 12mm thick cement mortar 1:3 (1 cement : 4 coarse sand), jointing with grey cement slurry @ 3.3 kg/ sqm including pointing the joints with white cement and matching pigment etc complete. including carriage of all labour equipments and materials to various location through all modes of transportation upto all leads, lifts and other incidential charges
83	P/L 40mm thick Cement concrete flooring 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20mm nominal size) finished with floating coat of neat cement, including cement slurry, but excluding the cost of nosing of steps etc.complete including carriage of material in all leads and lifts complete as per the direction of Engineer-in Charge including carriage of material upto all leads and lifts.
84	40 mm thick rubbed stone flooring over 20 mm (average) thick base of cement mortar 1:5 (1 cement : 5 coarse sand) with joints 3 mm thick, side buttered with cement mortar 1:2 (1 cement : 2 stone dust) admixed with pigment to matchthe shade of stone and pointingwith same mortar.Red Mandana Stone including carriage of all labour equipments and materials to various location through all modes of transportation upto all leads, lifts and other incidential charges
85	18mm thick Cement plaster skirting up to 30 cm height, with cement mortar 1:3 (1 cement : 3 coarse sand), finished with a floating coat of neat cement as per the direction of Engineer-in Charge including carriage of material upto all leads and lifts.
86	Providing and fixing HDF decorative laminate parquat origional flooring AC4 Class, 10mm thick as per the approved sample and shade placed over cusion of 2mm thick expended polyethene foam plus 100 micron thick polyethene sheet under lay no. 045 Beech west including border of required shade and colour complete in all respect upto all floor level including carriage of materials upto all leads and lift as per direction of Engineer in Charge.
87	Providing and laying Anti static vitrified anti static conductive abrasion resistant tile of size 60x60 cm & 10mm thick hard wearing and levelled floor in ASC blue colour suitable for the specified use laid on the existing floor with proper application process.The antistatic conductive reflective vitrified tile with all punched corner of make H&R JOHNSON/ORIENT/KAJARIA/NITCO should have surface electrical resistant-conductive less then 1mega ohm with static decay timeless be fixed using tile adhesive tile suitable to fix antistatic vitrified in minimum 6mm thick bet and by living a space of minimujm 5mm around each tile with a help of + shaped PVC sdpacer suitable to leave a groove of 5mm around all 4 sides of each tile.After curing of min. 24 hours prepare a grid of 18 gauge anilated pure copper wire around all four sides of antistatic conductive endura tile complete the work in all respect and to the entire satisfaction of the engineer in charge including carriage of materials upto all leads and lifts :-
88	P/F 12mm thick Radiation shield tile(RST) of size 30x30cm conforming to IS: 15622, of approved make, in all colours and shades, in skirting fixed over 12mm thick fixed with company approved chemical adhesive of approved shade over 12mm thick cement mortar 1:3 (1 cement : 3 coarse sand) as per the direction of Engineer-in Charge including carriage of material upto all leads and lifts.
89	P/L antiskid Full body vitrified floor tiles (with VC Shield technology size 600x1200 mm with 30cm wide dark shade border of approved shade conforming to IS: 15622, of approved make, in all colours and shades, laid on 20mm thick cement mortar 1:4 (1 cement : 4 coarse sand), jointing with grey cement slurry @ 3.3 kg/ sqm including pointing the joints with white cement and matching pigment etc complete including carriage of material upto all leads and lifts complete as per the direction of Engineer-in Charge including carriage of material in all leads and lifts.
90	P/F antiskid Full body vitrified floor tiles (600x1200 mm conforming to IS: 15622, of approved make, in all colours and shades, in skirting fixed over 12mm thick cement mortar 1:3 (1 cement :3 coarse sand), jointing with grey cement slurry @ 3.3 kg/ sqm includ including carriage of material in all leads and lifts complete as per the direction of Engineer-in Charge including carriage of material in all leads and lifts.
91	P/L antiskid Full body vitrified floor tiles of Durastone (of size 600x600mm conforming to IS: 15622, of approved make, in all colours and shades, laid on 20mm thick cement mortar 1:4 (1 cement : 4 coarse sand), jointing with grey cement slurry @ 3.3 kg/ sqm including pointing the joints with white cement and matching pigment etc complete including carriage of material upto all leads and lifts complete as per the direction of Engineer-in Charge including carriage of material in all leads and lifts.
92	P/L antiskid Full body vitrified floor tiles (Premium quality matt finish of size 30x30cm conforming to IS: 15622, of approved make, in all colours and shades, laid on 20mm thick cement mortar 1:4 (1 cement : 4 coarse sand), jointing with grey cement slurry @ 3.3 kg/ sqm including pointing the joints with white cement and matching pigment etc complete including carriage of material upto all leads and lifts complete as per the direction of Engineer-in Charge including carriage of material in all leads and lifts.
93	P/F full body vitrified stepping anti skid tiles in flooring/tread of steps over 20 mm thick base of CM 1:4 1 Cement : 4 Coarse sand), Jointing with grey cement slurry @ 3.3 kg/sqm including pointing the joints with white cement and matching pigment etc., complete including carriage of material upto all leads and lifts complete as per the direction of Engineer-in Charge including carriage of material in all leads and lifts.
94	P/F Ceramic Glazed tile 30X60 cm conforming to IS: 15622 of approved make, in all colours, shades of any size as approved by Engineer-in-Charge, in skirting, risers of steps and dados, over 12 mm thick bed of cement mortar 1:3 and jointing with grey cement slurry @ 3.3kg per sqm, including pointing in white cement mixed with pigment of matching shade complete. including carriage of material upto all leads and lifts complete as per the direction of Engineer-in Charge including carriage of material in all leads and lifts.
95	Providing and laying Trimix flooring of reinforced cement concrete pavement of grade 1:1.5:3 (1 cement : 1.5 coarse sand): 3 graded stone aggregate 20 mm nominal size) including the cost of centering and shuttering and Reinforcement with 8mm dia bar @ 300mm C/C both way single mesh bottom placing. The concrete shall be laid and finished with niddle vibrator then after screed board vibrator, vacuum dewatering process and finally finished by sprinkeling of hardening compound Nitoflor of FOS guard on surface evenly @ 5kg per sqm and finishing the surface by floating, brooming with wire brush etc. The width of pavement shall be maximum 4000 mm and groove of appropriate size 10 mmX20 mm shall be cut with machine on appropriate spacing as directed by Engineer-in-charge and filling this groove with approved grout/ sealent with beckar rod including making good the same and carriage of material upto all leads and lift complete as per specifications and directions of Engineer-in-charge.
96	P/L heavy duty precast cement concrete inter locking paver blocks vibro compacted upto M-50 grade i/c border or kurb block grey or coloured over subbase of concrete with 25 mm thick average thickness of cement mortar 1:4( 1 cement : 4 sand ) laid over and jointed with neat cement slurry mixed with pigment to match the shade of blocks i/c curring rubbing and polishing complet Subbase concrete floor to be paid for separately.60 mm thick interlocking paver block carriage of material upto all leads and lift complete as per specifications and directions of Engineer-in-charge.
97	Providing and fixing 20 mm thick gang saw cut, mirror polished, premoulded and prepolished, machine cut for kitchen platforms, vanity counters, window sills, facias and similar locations of required size, approved shade, colour and texture laid over 20 mm thick basecement mortar 1:4 (1 cement : 4 coarse sand), joints treated with white cement, mixed with matching pigment, epoxy touch ups, including rubbing, curing, moulding and polishing to edges to give high gloss finish etc. complete at all levels.Polished Granite Stone including carriage of material upto all leads and lift complete as per specifications and directions of Engineer-in-charge.
98	Providing edge moulding to 20 mm thick Granite workmarble stone counters, anities etc., including machine polishing to edge to give high gloss finish etc. complete as per design approved by Engineer-in-Charge carriage of material in all leads and lift complete .
99	Extra for fixing marble /granite stone, over and above corresponding asic item, in facia and drops of width upto 150 mm with epoxy resin based adhesive, including cleaning etc. complete. including carriage of material in all leads and lifts complete as per the direction of Engineer-in Charge including carriage of material in all leads and lifts.
100	Extra for making pre finished double nosing in treads of steps of Granite/vitrified stepped tile. including carriage of material in all leads and lifts complete as per the direction of Engineer-in Charge including carriage of material upto all leads and lifts.
101	Providing and fixing 20 mm thick gang saw cut, mirror polished, premoulded and prepolished, machine cut for kitchen platforms, vanity counters, window sills, facias and similar locations of required size, approved shade, colour and texture laid over 20 mm thick base cement mortar 1:4 (1 cement : 4 coarse sand), joints treated with white cement, mixed with matching pigment, epoxy touch ups, including rubbing, curing, moulding and polishing to edges to give high gloss finish etc. complete at all levels.Baroda Green Marble Stoneincluding carriage of material upto all leads and lift complete as per specifications and directions of Engineer-in-charge.
102	Providing edge moulding to 20 mm thick marble stone counters, anities etc., including machine polishing to edge to give high gloss finish etc. complete as per design approved . Marble workincluding carriage of material upto all leads and lift complete as per specifications and directions of Engineer-in-charge.
103	Extra for fixing marble /granite stone, over and above corresponding asic item, in facia and drops of width upto 150 mm with epoxy resin based adhesive, including cleaning etc. complete.including carriage of material upto all leads and lift complete as per specifications and directions of Engineer-in-charge.
104	P/F Polished Granite work gang saw cut (polished and machine cut) of thickness 18 mm for wall lining (veneer work), backing filled with a grout of average 12 mm thick in cement mortar 1:3 (1 cement : 3 coarse sand), including pointing with white cement mortar 1:2 (1 white cement : 2 marble dust) with an admixture of pigment to match the marble shade (To be secured to the backing by means of cramps, which shall be paid for separately.including carriage of material upto all leads and lift complete as per specifications and directions of Engineer-in-charge.
105	Providing and fixing 12mm brick tile cladding on walls / R.C.C. surface side as on faces of Arch masonry walls etc.on 12mm. thick cement plaster 1:3(1cement:3sand) and jointed with cement slurry i/c scaffolding etc. complete including carriage of materials upto all leads and lifts
106	Providing and fixing 0.60mm thick prepainted steel sheet of TATA Durashine in roofing with hot dipped metallic zinc coated sheet with top coat of regular modified polyster (RNP) organic coating of 20 microns over 5 microns primer coating to back coat of polyster of 5microns over 5 microns primer coating i/c fixing with G.I. self drilling screws of required sizes / prepainted iron J or L hooks, bolts and nuts 6mm dia metre with prepainted limpet and rubber washers complete with all accesoriees as required as per the direction of Engineer-in-charge:-0.60 mm ( zero point sixty millimetre) thick sheet including carriage of material upto all leads and lifts.
107	Providing and fixing ridges or hips 60 cm overall with 0.45mm thick prepainted steel sheets of TATA Durashine in roofing with hot dipped metalic zinc coated sheets with top coat of regular modified polyster organic coating of 20 microns over 5 microns primer coating + back coat of polyster of 5 microns over 5 microns primer coating i/c fixing with G.I. self drilling screws of required sizes / prepainted iron J or L hooks, bolts & nuts 6mm dia & prepainted G.I. limpet and bitumen washers complete with all accessories as required as per the direction of Engineer in Charges:-0.60 mm ( zero point sixty millimetre) thick sheet including carriage of material upto all leads and lifts.
108	Providing and fixing valley 90 cm overall with 0.45mm thick prepainted steel sheets of TATA Durashine in roofing with hot dipped metalic zinc coated sheets with top coat of regular modified polyster organic coating of 20 microns over 5 microns primer coating + back coat of polyster of 5 microns over 5 microns primer coating i/c fixing with G.I. self drilling screws of required sizes / prepainted iron J or L hooks, bolts & nuts 6mm dia & prepainted G.I. limpet and bitumen washers complete with all accessories as required as per the direction of Engineer in Charges:-0.60 mm ( zero point sixty millimetre) thick sheet including carriage of material upto all leads and lifts.
109	Providing and fixing flashing 38cm overall with 0.45mm thick prepainted sheet of a TATA Durashine in roofing with hot dipped metalic zinc coated sheet with top coat of regular modified polyster organic coating of 20 microns over 5 microns primer coating + back coat of polyster of 5 microns over 5 microns primer coating i/c fixing with G.I. self drilling screws of required sizes / prepainted iron J or L hooks, bolts and nuts 6mm dia meter & prepainted G.I. limpet & bitumen washers complete with all accessories as required as per the direction of Engineer-in-Charge:-0.60 mm ( zero point sixty millimetre) thick sheet including carriage of material upto all leads and lifts.
110	Providing fixing 30 cm wide 120 cm overall box type gutter with 0.45 mm thick plain prepainted steel sheet in roofing with hot dipped metallic zinc coated sheet with top coat of regular modified polyster organic coating of back coat of polyster 5 microns over 5 microns primer coating with iron brackets 40 X 3 mm size bolt and nuts and washers etc. including making necessary connections with rain water pipe complete as per design.including carriage of material upto all leads and lift complete as per specifications and directions of Engineer-in-charge.
111	Providing and fixing on wall face PVC 150 mm dia rain water pipes of working pressure not less than 4.5 kg / sqm including filling the joints with approved adhesive complete including carriage of materials upto all leads and lifts :-
112	Providing and fixing on wall face PVC accessories 150 mm dia PVC door bend for rain water pipes including filling the joints with approved adhesive complete including carriage of materials within all leads and lifts :-
113	Providing and fixing on wall face PVC accessories 150 mm dia PVC plain bend for rain water pipes including filling the joints with approved adhesive complete including carriage of materials within all leads and lifts :-
114	Providing and fixing on wall face PVC accessories 150 mm dia Plain Shoe for rain water pipes including filling the joints with approved adhesive complete including carriage of materials within all leads and lifts :-
115	Providing and fixing M.S. holder bat clamps 150mm dia of approved design to PVC. Pipes embedded in and including cement concrete blocks 10x10x10cms of 1:2:4 mix (1 cement : 2 sand :4 graded stone aggregate 20mm nominal size) and cost of cutting holes and making good the wall etc including carriage of materials within all leads and lifts :-
116	Providing and fixing M.S. BP Sheet 2mm thick in eaves board/facia/soffits/ceiling including cutting, fixing and welding to steel roof members and applying a coat of red lead primer complete as per the instruction of Engineer-in-charge (Base members of steel work shall be measured & paid separtely) including carriage of materials in all leads and lifts :-
117	IStructural steel work including hollow section riveted, bolted or welded in built up sections, trusses and framed work, including cutting,hoisting, fixing in position and applying a priming coat of approved steel primer all complete. ncluding carriage of materials in all leads and lifts :-n truss and trused purlins in buildings.and In beams joists channels ,angles , tee ,flats with connecting plates or angle cleats as in main and cross beams,hip and jack rafters,purlins connected to common rafters and the like. including carriage of materials within all leads and lifts :-
118	Steel work welded in built up sections/ framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required. ncluding carriage of materials in all leads and lifts :-In gratings, frames, guard bar, ladder, railings, brackets,ornamental brackets decorative MS screen gates and similar works including carriage of materials within all leads and lifts :-
119	Providing and fixing in position collapsible steel shutters with vertical channels 20x10x2 mm and braced with flat iron diagonals 20x5 mm size, with top and bottom rail of T-iron 40x40x6 mm, with 40 mm dia steel pulleys, complete with bolts, nuts, locking arrangement, stoppers, handles, including applying a priming coat of approved steel primer. including carriage of materials within all leads and lifts :-
120	Supplying and fixing rolling shutters of approved make,made of required size M.S. laths, interlocked together through their entire length and jointed together at the end by end locks, mounted on specially designed pipe shaft with brackets, side guides and arrangements for inside and outside locking with push and pull operation complete, including the cost of providing and fixing necessary 27.5 cm long wire springs manufactured from high tensile steel wire of adequate strength conforming to IS: 4454 - part 1 and M.S. top cover of required thickness for rolling shutters80x1.20 mm M.S. laths with 1.20 mm thicktop cover including carriage of material upto all leads and lift complete as per specifications and directions of Engineer-in-charge.
121	Providing and fixing ball bearing for rolling shutters including carriage of material upto all leads and lift complete .
122	Extra for providing mechanical device chain and crank operation for operating rolling shuttersExceeding 10.00 sqm and upto 16.80 sqm in the area ncluding carriage of material upto all leads and lift complete
123	Providing and fixing mild steel round holding down bolts with nuts and washer plates complete.including carriage of material in all leads and lifts complete as per the direction of Engineer-in Charge including carriage of material upto all leads and lifts.
124	P/F MS hollow rectangular / Circular hand rail MSTube of approved size by welding etc. to steel ladder railing, balcony railing, staircase railing and similar works, i/c applying priming coat of approved steel primer.including carriage of material in all leads and lifts complete as per the direction of Engineer-in Charge including carriage of material in all leads and lifts.
125	Providing and fixing M.S. hollow pipe in vertical posts 100mm dia welded in straight lengh over M.S. flat at top of vertical balusters including one coat of red oxide priming coat complete including carriage of materials within all leads and lifts.
126	Providing and fixing double rebate door frame manufactued from ISLC 125 mm ( with MS Flat 125X4 mm for cenrte frame) & MS hollow section for rebate 40X12 mm and 2.00 mm thick welded together for making rebate i/c MS Flat Holdfast 30 cm long and 4 mm thick embedded in C.C Block 1:3:6 as per design and drawing i/c jambs, lock jamb, beed and if required angle threshold of mild steel angle 50x25mm welded or rigidly fixed by mechanical means lugs with split end tails to each jamb i/c steel butt hinges 2.5 mm thick with provision for locking arrangement and shock absorbers as specified and applying a coat of steel primer after pre treatment of the surface complete.End Frame including carriage of material in all leads and lifts complete as per the direction of Engineer-in Charge including carriage of material in all leads and lifts.
127	Providing and fixing double rebate door frame manufactued from ISLC 125 mm ( with MS Flat 125X4 mm for cenrte frame) & MS hollow section for rebate 40X12 mm and 2.00 mm thick welded together for making rebate i/c MS Flat Holdfast 30 cm long and 4 mm thick embedded in C.C Block 1:3:6 as per design and drawing i/c jambs, lock jamb, beed and if required angle threshold of mild steel angle 50x25mm welded or rigidly fixed by mechanical means lugs with split end tails to each jamb i/c steel butt hinges 2.5 mm thick with provision for locking arrangement and shock absorbers as specified and applying a coat of steel primer after pre treatment of the surface complete.Centre/ Mullion Frame including carriage of material in all leads and lifts complete as per the direction of Engineer-in Charge including carriage of material in all leads and lifts.
128	Providing and fixing single rebate door frame manufactued from ISLC 75 mm (with MS Flat 75X4 mm for cenrte frame) & MS hollow section for rebate 40X12 mm and 1.5 mm thick welded together for making rebate i/c MS Flat Holdfast 30 cm long and 4 mm thick embedded in C.C Block 1:3:6 as per design and drawing i/c jambs, lock jamb, beed and if required angle threshold of mild steel angle 50x25mm welded or rigidly fixed by mechanical means lugs with split end tails to each jamb i/c steel butt hinges 2.5 mm thick with provision for locking arrangement and shock absorbers as specified and applying a coat of steel primer after pre treatment of the surface complete.
129	Providing and fixing stainless steel ( Grade 316) railing made of Hollow tubes, channels, plates etc., including welding, grinding, buffing, polishing and making curvature (wherever required) and fitting the same with necessary stainless steel nuts and bolts complete, i/c fixing the railing with necessary accessories & stainless steel dash fasteners , stainless steel bolts etc., of required size, on the top of the floor or the side of waist slab with suitable arrangement as per approval of Engineer-in- charge, (for payment purpose only weight of stainless steel members shall be considered excluding fixing accessories such as nuts, bolts,fasteners etc.)including carriage of material in all leads and lifts complete as per the direction of Engineer-in Charge including carriage of material in all leads and lifts.
130	Painting Steel work with Deluxe Multi Surface Paint to give an even shade. Two or more coat applied @ 0.90 ltr/ 10 sqm over an under coat of primer applied @ 0.80 ltr/ 10 sqm of approved brand and manufacture including carriage of material in all leads and lifts complete as per the direction of Engineer-in Charge including carriage of material in all leads and lifts.
131	Applying priming coat over new wood and wood based surfaces after and including preparing the surface by thoroughly cleaning oil, grease, dirt and other foreign matter sand papering and knotting including carriage of materials within all leads and lifts :With ready mixed pink or Grey primer of approved brand and manufacture on wood work (hard and soft wood)including carriage of material in all leads and lifts complete as per the direction of Engineer-in Charge including carriage of material in all leads and lifts.
132	Painting wood work with Deluxe Multi Surface Paint of required shade. Two or more coat applied @ 0.90 ltr/10 sqm over an under coat of primer applied @0.75 ltr/10 sqm of approved brand and manufacture including carriage of material in all leads and lifts complete as per the direction of Engineer-in Charge including carriage of material in all leads and lifts.
133	6mm cement plaster to ceiling in cement mortar 1:3 (1 cement : 3 sand) as per the direction of Engineer-in Charge including carriage of material in all leads and lifts.
134	15mm cement plasterRough Side in single coat on the rough side of brick/concrete/stone walls for interior plastering upto all floor level including arrises, internal rounded angles, chamfers and/or rounded angles not exceeding 30cm in girth and finished even and sand opapered smooth including carriage of materials with in all eads and lifts..1:6 (1 cement: 6 coarse sand) as per the direction of Engineer-in Charge including carriage of material in all leads and lifts complete
135	15 mm cement plaster in Fair Sidesingle coat on the fair side of brick/concrete/stone walls for interior plastering upto all floor level including arrises, internal rounded angles, chamfers and/or rounded angles not exceeding 30cm in girth and finished even and sand opapered smooth including carriage of materials within all leads and lifts..1:6 (1 cement: 6 fine sand)
136	12 mm thick plain cement mortar bands in cement mortar 1:4 (1 cement : 4 fine sand):Raised Bandincluding carriage of materials within all leads and lifts
137	Finishing walls with Acrylic Smooth exterior paint of required shade ,brand and manufacture for interior grade on undecorated concrete / stone / plastered wall surfaces to give an even shade including t horoughly brushing the surface free from mortar dropping and other foreign matter and sand papered smooth including applying of putty a required for metling the surfaceNew work (Two or more coat applied @ 1.67 ltr/10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/10 sqm)
138	Wall painting with acrylic emulsion paint of approved brand and manufacture to give an even shade :including carriage of material in all leads and lifts complete as per the direction of Engineer-in Charge including carriage of material in all leads and lifts.
139	Distempering two or more coats on undecorated ceiling with 1st quality acrylic distemper, having VOC (Volatile Organic Compound ) content less than 50 grams/ litre, of approved brand and manufacture, including applying additional coats wherever required, to achieve even shade and colour.
140	Distempering two or more coats on undecorated wall with 1st quality acrylic distemper, having VOC (Volatile Organic Compound ) content less than 50 grams/ litre, of approved brand and manufacture, including applying additional coats wherever required, to achieve even shade and colour.including carriage of material in all leads and lifts complete as per the direction of Engineer-in Charge including carriage of material in all leads and lifts.
141	Providing and applying white cement based putty of average thickness 1mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete.including carriage of material in all leads and lifts complete as per the direction of Engineer-in Charge including carriage of material in all leads and lifts.
142	Providing and fixing G.I. pipes complete with G.I. fittings including trenching and refilling etc.including carriage of materials within all leads and lifts.15 mm nominal bore :-
143	Providing and fixing G.I. pipes complete with G.I. fittings including trenching and refilling etc.including carriage of materials within all leads and lifts.20 mm nominal bore :-
144	Providing and fixing G.I. Pipes complete with G.I. fittings and clamps, i/c making good the walls etc. concealed pipe, including painting with anti corrosive bitumastic paint, cutting chases and making good the wall :including carriage of materials within all leads and lifts 15 mm dia nominal bore
145	Providing and fixing G.I. Pipes complete with G.I. fittings and clamps, i/c making good the walls etc. concealed pipe, including painting with anti corrosive bitumastic paint, cutting chases and making good the wall :including carriage of materials within all leads and lifts 20mm nominal bore :-
146	Making connection of G.I. distribution branch with G.I main of following sizes by providing and fixing tee,including cutting and threading the pipe etc. complete : 25 to 40 mm nominal bore
147	Fixing water meter and stop cock 20mm nominal bore :-in G.I. pipe line including cutting and threading the pipe and making long screws etc. complete (cost of water meter and stop cock to be paid separately).
148	Providing and placing on terrace (at all floor levels) polyethylene water storage tank, IS : 12701 marked, with cover and suitable locking arrangement of various capicityand making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank.including carriage of materials within all leads and lifts. Net capacity
149	Constructing masonry Chamber 30x30x50 cm inside, in brick work in cement mortar 1:4 (1 cement :4 coarse sand) for stop cock, with C. I. surface box 100x100 x75 mm (inside) with hinged cover fixed in cement concrete slab 1:2:4 mix (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size), i/c necessary excavation, foundation concrete 1:5:10 ( 1 cement : 5 fine sand : 10 graded stone aggregate 40mm nominal size ) and inside plastering with cement mortar 1:3 (1cement : 3 coarse sand) 12mm thick, finished with a floating coat of neat cement complete as per standard design :including carriage of materials within all leads and lifts.With common burnt clay F.P.S.(non modular) bricks of class designation 7.5
150	Providing and fixing Polyethelene-Aluminium-Polyethelene PE-AL- PE Composite Pressure Pipes conforming to IS - 15450, U.V. stabilized with carbon black having thermal stability for hot & cold water supply,capable to withstand temperature up to 80°C, including all special ittings of composite material (engineering plastic blend and brass inserts wherever required) e.g.elbows, tees, reducers, couplers & connectors etc., with clamps at 1.00 metre spacing. This includes testing of joints complete 1216 mm (16 mm O.D. pipe) INTERNAL WORK - EXPOSED ON WALLas per direction of the Engineer-incharge.including carriage of materials within all leads and lifts.
151	Providing and fixing Polyethelene-Aluminium-Polyethelene PE-AL- PE Composite Pressure Pipes conforming to IS - 15450, U.V. stabilized with carbon black having thermal stability for hot & cold water supply,capable to withstand temperature up to 80°C, including all special ittings of composite material (engineering plastic blend and brass inserts wherever required) e.g.elbows, tees, reducers, couplers & connectors etc., with clamps at 1.00 metre spacing. This includes testing of joints complete as per direction of the Engineer-incharge.including carriage of materials within all leads and lifts. 1620 mm ( 20 mm OD pipe).
152	Providing and fixing Polyethelene-Aluminium-Polyethelene PE-AL- PE Composite Pressure Pipes conforming to IS - 15450, U.V. stabilized with carbon black having thermal stability for hot & cold water supply,capable to withstand temperature up to 80°C, including all special fittings of composite material (engineering plastic blend and brass inserts wherever required) e.g.elbows, tees, reducers, couplers & connectors etc., with clamps at 1.00 metre spacing. This includes the costs of cutting chases and including testing of joints complete as per direction of the engineer in charge. Concealed work, including cutting chases and making good the wall etc. 1216 mm (16 mm O.D. pipe)
153	Providing and fixing Polyethelene-Aluminium-Polyethelene PE-AL- PE Composite Pressure Pipes conforming to IS - 15450, U.V. stabilized with carbon black having thermal stability for hot & cold water supply,capable to withstand temperature up to 80°C, including all special fittings of composite material (engineering plastic blend and brass inserts wherever required) e.g.elbows, tees, reducers, couplers & connectors etc., with clamps at 1.00 metre spacing. This includes the costs of cutting chases and ncluding testing of joints complete as per direction of the engineer in charge. Concealed work, including cutting chases and making good the wall etc. 1620 mm ( 20 mm OD pipe).
154	Providing and fixing Polyethelene-Aluminium-Polyethelene PE-AL- PE 1216 mm (16 mm O.D. pipe)Composite Pressure Pipes conforming to IS - 15450, U.V. stabilized with carbon black having thermal stability for hot & cold water supply,capable to withstand temperature up to 80°C, including all special ittings of composite material (engineering plastic blend and brass inserts wherever required) e.g.elbows, tees, reducers, couplers & connectors etc., with trenching, refilling and testing of joints complete as per direction of the engineer in charge.including carriage of materials within all leads and lifts.
155	Providing and fixing Polyethelene-Aluminium-Polyethelene PE-AL- PE 1620 mm ( 20 mm OD pipe).Composite Pressure Pipes conforming to IS - 15450, U.V. stabilized with carbon black having thermal stability for hot & cold water supply,capable to withstand temperature up to 80°C, including all special ittings of composite material (engineering plastic blend and brass inserts wherever required) e.g.elbows, tees, reducers, couplers & connectors etc., with trenching, refilling and testing of joints complete as per direction of the engineer in charge.including carriage of materials within all leads and lifts
156	Providing and fixing high pressure PVC spigot and socket,150 mm dia waste and ventilating pipes ISI marked including fitting with approved adhesive etc.including carriage of materials within all leads and lifts.
157	Providing and fixing110 mm dia high pressure PVC spigot and socket, waste and ventilating pipes ISI marked including fitting with approved adhesive etc.including carriage of materials within all leads and lifts.
158	Providing and fixing 150 mm dia PVC single equal branch with oval access door , ISI marked insertion rubber washer 3 mm thick bolts and nuts complete including fixing with approved adhesive etc. complete.including carriage of materials within all leads and lifts :-
159	Providing and fixing 110 mm dia PVC single equal branch with oval access door , ISI marked insertion rubber washer 3 mm thick bolts and nuts complete including fixing with approved adhesive etc. complete.including carriage of materials within all leads and lifts
160	Providing and fixing 150 mm dia PVC door bend with oval acces door, insertion rubber washer 3 mm thick bolts and nuts ISI marked complete including fixing with approved adhesive etc. complete including carriage of materials within all leads and lifts
161	Providing and fixing 110 mm dia PVC door bend with oval acces door, insertion rubber washer 3 mm thick bolts and nuts ISI marked complete including fixing with approved adhesive etc. complete including carriage of materials within all leads and lifts
162	Providing and fixing 150 mm dia PVC single equal branch plain ISI marked including fixing with approved adhesive etc. complete.including carriage of materials within all leads and lifts :-
163	Providing and fixing 110 mm dia PVC single equal branch plain ISI marked including fixing with approved adhesive etc. complete.including carriage of materials within all leads and lifts :-
164	Providing and fixing 150 mm dia PVC collars ISI marked including fixing with approved adhesive etc. complete.including carriage of materials within all leads and lifts :-
165	Providing and fixing110 mm dia PVC collars ISI marked including fixing with approved adhesive etc. complete.including carriage of materials within all leads and lifts :-
166	Providing and fixing 150 mm dia PVC plain bend ISI marked including fixing with approved adhesive etc. complete.including carriage of materials within all leads and lifts :-
167	Providing and fixing 110 mm dia PVC plain bend ISI marked including fixing with approved adhesive etc. complete.including carriage of materials within all leads and lifts
168	Providing and fixing 150 mm dia PVC clamps ISI marked of approved design with steel screws and rawal plugs etc. complete.including carriage of materials within all leads and lifts :-
169	Providing and fixing 110 mm dia PVC clamps ISI marked of approved design with steel screws and rawal plugs etc. complete.including carriage of materials within all leads and lifts :-
170	Providing and fixing 110 mm x 90 mm PVC floor traps ISI marked of self cleaning design including fixing with approved adhesive, cost of cutting and making good the wall and floors etc. complete.including carriage of materials within all leads and lifts :-
171	Providing and fixing 150 mm dia.PVC cowl including carriage of materials within all leads and lifts :-
172	Providing and fixing 110 mm dia.PVC cowl including carriage of materials within all leads and lifts :-
173	Providing and fixing 150 mm dia PVC double equal branch with oval acces door, insertion rubber washer 3 mm thick bolts and nuts ISI marked complete including fixing with approved adhesive etc. complete
174	Providing and fixing 110 mm dia PVC double equal branch with oval acces door, insertion rubber washer 3 mm thick bolts and nuts ISI marked complete including fixing with approved adhesive etc. complete
175	Providing and fixing 150 mm dia PVC plain double equal branch ISI marked including fixing with approved adhesive etc. complete.
176	Providing and fixing 110 mm dia PVC plain double equal branch ISI marked including fixing with approved adhesive etc. complete.
177	Providing and fixing 150 mm x 110 mm dia PVC reducer ISI marked including jointing with approved adhesive etc. complete.including carriage of materials within all leads and lifts :
178	Providing and fixing 110 mm x 90 mm dia PVC reducer ISI marked including jointing with approved adhesive etc. complete.including carriage of materials within all leads and lifts :
179	Providing and fixing 110mmPVC 'P' or 'S' trap for water closet ( squatting pan) ISI marked including jointing the trap with the pan and PVC pipe with approved adhesive etc. complete.including carriage of materials within all leads and lifts :-
180	Providing and fixing 110mm soil, waste and vent pipes : 100 mm dia Sand cast iron S&S pipe as per IS: 1729 including carriage of materials within all leads and lifts :-
181	Providing and fixing bend of required degree with access door, insertion rubber washer 3 mm thick, bolts and nuts complete. 100 mm Sand cast iron S&S as per IS - 1729 including carriage of materials within all leads and lifts :-
182	Cutting Chase in stone / brick masonary walls for following diameter sand cast iron/centrifugally cast (spun) iron pipes and making good the same with cement concrete 1:3:6 ( 1 cement : 3 coarse sand :6 graded stone aggregate 12.5 mm nominal size), including necessary plaster and pointing in cement mortar 1:4 (1 cement : 4 coarse sand) 100 mm dia. including carriage of materials within all leads and lifts :-
183	Providing and fixing white vitreous china water closet squatting pan (Indian type) (Earthwork, bed concrete and traps to be measured and paid for seperately including carriage of material within all leads and lifts:- Orissa Pan W.C.No. 2071 of Cera/Hindwareincluding carriage of materials within all leads and lifts :-
184	Providing and fixing floor mounted, white vitreous china single piece, double traps syphonic water closet of approved brand/make, shape, size and pattern including integrated white vitreous china cistern of capacity 10 litres with dual flushing system, including all fittings andfixtures with seat cover, cistern fittings, nuts, bolts and gasket etc including making connection with the existing P/S trap, complete in all respect as per directions of Engineer-in-Charge. Edge cat No 92562 of size 63.5x37.5x75.5 cm of HINDWARE/ CERA in white shadeincluding carriage of materials within all leads and lifts :-
185	Providing and fixing viterous China wash, down water closet (European Type W.C. pan) with integral 'P' or 'S' trap including jointing the trap with soil pipe in cement mortar 1:1 (1 cement : 1 sand) seat and cover to be measured and paid for separately including carriage of materials within all leads and lifts :-European seat No 7011 CRANE EWC740X50X835 in white shade of CERA for handicaped Toilet
186	Providing and fixing white vitreous china extended wall mounting water closet of size 780x370x690 mm of approved shape including providing & fixing white vitreous china cistern with dual flush fitting, of flushing capacity 3 litre/ 6 litre (adjustable to 4 litre/ 8 litres),including seat cover, and cistern fittings, nuts, bolts and gasket etc complete Cora Vortex CAT No-92569 of size 52.5x36.5x36 cm in white shade of HINDWARE/ CERA including carriage of materials within all leads and lifts :-
187	Providing and fixing floor mounted, white vitreous china single piece, double traps syphonic water closet of approved brand/make, shape, size and pattern including integrated white vitreous china cistern of capacity 10 litres with dual flushing system, including all fittings andfixtures with seat cover, cistern fittings, nuts, bolts and gasket etcMatrix EWC cat No 70002 of size 740x50x835 cm of HINDWARE/ CERA in white shade. including making connection with the existing P/S trap, complete in all respect as per directions of Engineer-in-Charge
188	Providing and fixing P.V.C. low level flushing cistern with manually controlled device (handle lever) conforming to IS : 7231, with all fittings and fixtures complete.10 litre capacity - White including carriage of materials within all leads and lifts :-
189	Providing and fixing viterous China wash basin of hindware Dune Cat No-10186 with single hole for pillar tap and painted white including cutting holes and making good the same but excluding fittingwash basin of hindware Dune Cat No-10186 with single hole for Basin mixer of size 55 X 40 cm including carriage of materials within all leads and lifts :-
190	Providing and fixing viterous China wash basin of Hindware Etios Cat No 10122 with half pedestal with C.I. or M.S. brackets painted white including cutting holes and making good the same but excluding fitting Semi circle Etios Cat No-10122 of size 48x36 cm including carriage of materials within all leads and lifts :-
191	Providing and fixing viterous China wash basin 460 X 360x180 mm of hindware Matrix cat No 70002 with single hole for pillar tap and painted white including cutting holes and making good the same but excluding fitting including carriage of materials within all leads and lifts :-
192	Providing and fixing Stainless Steel A ISI 304 (18/8) kitchen sink as per IS:13983 with C.I. brackets and stainless steel plug 40 mm, including painting of fittings and brackets, cutting and making good the walls wherever required : Stainless steel Sink of size 45x60 cm of Hindware/ cera/ Jaquar without drain board including carriage of materials within all leads and lifts :-
193	Providing and fixing white vitreous china Size 550x400x180 mm laboratory sink with C.I. brackets, C.P. brass chain with rubber plug, 40 mm C.P brass waste and 40mm C.P. brass trap with necessary C.P. brass unions complete, including painting of fittings and brackets, cutting and making good the wall wherever required : including carriage of materials within all leads and lifts :-
194	Providing and fixing G.I. inlet connection for flush pipe connecting with W.C. pan.including carriage of materials within all leads and lifts :-
195	Providing and fixing white vitreous china flat back half stall urinal of size 375x390x590 mm with white PVC automatic flushing cistern, with fittings, standard size C.P. brass flush pipe, spreaders with unions and clamps (all in C.P. brass) with waste fitting as per IS : 2556, C.I. trap with outlet grating and other couplings in C.P. brass, including painting of fittings and cutting and making good the walls and floors wherever required : Flat back Large Cat no 60002 of size 37.5x39x59 cm of hindware/cera including carriage of materials within all leads and lifts :-
196	Providing and fixing 600mm x 300mm white vitreous china division plate for urinal including carriage of materials within all leads and lifts
197	Providing and fixing white vitreous china pedestal for wash basin completely accessed at the back for the reception of pipes and fittings. including carriage of materials within all leads and lifts :-
198	Providing and fixing C.P. brass waste (heavy duty ISI marked IS:8931 & 8934) for wash basin or sink including carriage of materials within all leads and lifts :-
199	Providing and fixing P.V.C. waste pipe for sink or wash basin including P.V.C. waste fittings complete. 32 mm dia Flexible pipe including carriage of materials within all leads and lifts :-
200	Providing and fixing 100 mm CP grating for Nahani / gully / Floor trap including carriage of matterials within all leads and lifts .
201	Providing and fixing 600mmx450mm bevelled edge mirror of superior glass (of approved quality) complete with 6 mm thick hard board ground fixed to wooden cleats with C.P.brass screws and washers complete.including carriage of materials within all leads and lifts :-
202	Providing and fixing C.P. brass towel rail 600 X 20 mm(heavy duty ISI marked IS:8931 & 8934) complete with C.P. brass brackets fixed to wooden plugs with C.P. brass screws including carriage of materials within all leads and lifts :-
203	Providing and fixing 600x120x5 mm glass shelf with edges round off, supported on anodised aluminium angle frame with C.P. brass brackets and guard rail complete fixed with 40 mm long screws, rawl plugs etc.,complete.including carriage of materials within all leads and lifts :-
204	Providing and fixing chromium plated brass soap dish with C.P. brass brackets fixed to wooden cleats with C.P. brass screws including carriage of materials within all leads and lifts :-
205	Providing & fixing CP Brass shower rose with 15 or 20 mm inlet.100 mm ( one hundred milimetre)diameter.including carriage of materials within all leads and lifts :-
206	Providing and fixing toilet paper holder with flap recessed type No.1553 :of hotelier series of jaquar fixed with stainless steel screws etc complete including carriage of materials within all leads and lifts :-
207	Providing and fixing C.P. brass bib cock of approved quality conforming to IS:8931 with flenge: 15mm dia :-including carriage of materials within all leads and lifts :-
208	Providing and fixing CP brass pillar tap15mm (fifteen milimetre ) dia of jaquar with capstan head (heavy duty ISI marked IS:8931 & 8934) including carriage of materials within all leads and lifts :-
209	Providing and fixing C.P. brass angle valve15mm(fifteen milimetre ) dia for basin mixer and geyser points of approved quality conforming to IS:8931including carriage of materials within all leads and lifts :-
210	Providing and fixing mixture for kitchen sink of Jaquar including carriage of materials within all leads and lifts :-
211	Providing and fixing uplasticised PVC connection pipe 15mm nominal bore45cms length (heavy duty ISI marked IS:8931& 8934) with brass unions including carriage of materials with all leads and lifts
212	Providing and fixing C.P Bottle trap (heavy duty ISI marked I.S No 8931 & 8934) for wash basin and sink including carriage of materials within all leads and lifts.
213	Providing and fixing C.P. brass stop cock (concealed) of standard design and of approved make conforming to IS:8931.including carriage of materials within all leads and lifts.
214	Providing and fixing PTMT bib cock of approved quality and colour.15mm nominal bore, 86 mm long, weighing not less than 88 gms including carriage of materials within all leads and lifts.
215	Providing and fixing PTMT, push cock of approved quality and colour.15 mm nominal bore, 80 mm long, weighing not less than 46 gms including carriage of materials within all leads and lifts.
216	Providing and fixing brass full way valve15mm ( fifteen milimetre)nominal bore with wheel including carriage of materials within all leads and lifts :- :-
217	Providing and fixing brass full way valve 20mm nominal borewith wheel including carriage of materials within all leads and lifts :-
218	Providing and fixing Brass ball way valve15mm ( fifteen milimetre)nominal bore( horizontal plunger type) high pressure with polythene plastic floats:including carriage of materials within all leads and lifts :- :-
219	Providing and fixing 8 mm dia C.P. / S.S. Jet with flexible tube upto 1 metre long with S.S. triangular plate to European type W.C. of quality and make as approved by Engineer - in - charge.including carriage of materials within all leads and lifts :- :-
220	Providing and laying 150 mm dia ( to level or slopes) and jointing with approved adhesive high pressure PVC spigot and socket waste and ventilating pipe 150 mm dia in trenches.including carriage of materials within all leads and lifts :- :-
221	Providing and laying cement concrete 1:4:8 (1 cement :4 coarse sand : 8 graded stone aggregate 40 mm nominal size) all-round S.W./ PVC pipes (150 MM DIA) including bed concrete as per standard design :including carriage of materials within all leads and lifts :-.
222	Constructing brick masonry manhole in cement mortar 1:4 ( 1 cement : 4 coarse sand ) with R.C.C. top slab with 1:1.5:3 mix (1 cement : 1.5 coarse sand (zone- III) :3 graded stone aggregate 20 mm nominal size),foundation concrete 1:4:8 mix (1 cement : 4 coarse sand (zone- III) : 8 graded stone aggregate 40 mm nominal size), inside plastering 12 mm thick with cement mortar 1:3 (1 cement : 3 coarse sand) finished with floating coat of neat cement and making channels in cement concrete1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) finished with a floating coat of neat cement complete -Inside size 90x80 cm and 45 cm deep including Precast RCC Cemocrate or equivalent cover with frame (heavy duty) of size 455x610 mm internal dimensions, With common burnt clay F.P.S. (non modular) bricks of class designation 7.5 Precast RCC Cemocrate or equivalent (Heavy Grade) cover with frame forgully trape (Standard Pattern): as per standard design :including carriage of materials within all leads and lifts :
223	Constructing brick masonry manhole in cement mortar 1:4 ( 1 cement : 4 coarse sand ) with R.C.C. top slab with 1:1.5:3 mix (1 cement : 1.5 coarse sand (zone- III) :3 graded stone aggregate 20 mm nominal size),foundation concrete 1:4:8 mix (1 cement : 4 coarse sand (zone- III) : 8 graded stone aggregate 40 mm nominal size), inside plastering 12 mm thick with cement mortar 1:3 (1 cement : 3 coarse sand) finished with floating coat of neat cement and making channels in cement concrete1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) finished with a floating coat of neat cement :-Inside size 120x90 cm and 90 cm deep including Precast RCC Cemocrate or equivalent cover with frame (heavy duty) of size 455x610 mm internal dimensions, With common burnt clay F.P.S. (non modular) bricks of class designation 7.5complete as per standard design :including carriage of materials within all leads and lifts
224	Providing and fixing in position pre-cast R.C.C. manhole cover and frame of required shape and approved quality including carriage of materials within all leads and lifts :-LD- 2.5 Rectangular shape 610x455 mm internal dimensions.including carriage of materials within all leads and lifts
225	Supplying and Fixing 300x300 mm Precast RCC Cemocrate or equivalent (Heavy Grade) cover with frame forgully trape (Standard Pattern): including carriage of materials within all leads and lifts
226	Providing and installing Mono Block Electric pump 2 HP single phase of Kirloskar make or equivalent including fixing complete.including carriage of materials within all leads and lifts :-
227	Cutting holes up to 30x30 cm in walls including making good the same: With common burnt clay F.P.S. (non modular) bricks.including carriage of materials within all leads and lifts :-
228	Cutting holes up to 15x15 cm in R.C.C. floors and roofs for passing drain pipe etc. and repairing the hole after insertion of drain pipe etc. with cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size), including finishing complete so as to make it leak proof..including carriage of materials within all leads and lifts :-
229	Providing, laying, jointing and pointing with a stiff mixture of cement mortar in proportion of 1:1 (1 cement : 1 sand) 150 mm internal diameter salt glazed stoneware grade 'A' half round channels including carriage of materials within all leads and lifts :-
230	P/F CP 40 mm dia Grab Bars of approved make and shape in handicapped toilet..including carriage of materials within all leads and lifts :-
231	Providing and laying in position specified grade of reinforced cement concrete, excluding the cost of centering, shuttering, finishing and reinforcement - All work up to plinth level :1:2:4 (1 cement : 2 coarse sand) : 4 graded stone aggregate 20 mm nominal size).including carriage of materials within all leads and lifts :-
232	Providing and laying cement concrete work 1:1½.:3 (1 cement : 1½. sand : 3 graded stone aggregate 20 mm nominal size) mechanically mixed and vibrated for compacting concrete and curing complete excluding cost of form work and reinforcement for reinforce cement concrete.Suspended floors, roofs, landing and shelvesand their support, balconies, beams, girders, bressumers and cantilever. including carriage of materials in all leads and lifts
233	Square rubble masonary coursed with hard stone of approved quality in foundation and plinth in walls in cement mortar 1 : 4 ( 1 cement : 4 sand)and including rakingout joints in:-.Including carriage of material within all leads and lifts.
234	15 mm cement plaster in Cement mortar 1:4(1 cement : 4 sand)single coat on the rough side of brick/concrete/stone walls for interior plastering upto all floor level including arrises, internal rounded angles, chamfers and/or rounded angles not exceeding 30cm in girth and finished even and smooth including carriage of materials within all leads and lifts :-
235	Providing and laying cement concrete work 1:1½.:3 (1 cement : 1½. sand : 3 graded stone aggregate 20 mm nominal size) mechanically mixed and vibrated for compacting concrete and curing complete excluding cost of form work and reinforcement for reinforce cement concrete Walls (any thickness but not less than 0.10 metre thickness) including attached pillasters, buttresses, plinth and string courses, etc. from top of foundation upto all heights.including carriage of materials in all leads and lifts.
236	Supplying and filing brick bats in soakpit of following sizes including carriage of materials within all leads and lifts :-
237	Supplying and filing crushed stone aggregate 25 mm and 12 mm nominal size in soakpit of following sizes including carriage of materials within all leads and lifts :-
238	Providing and fixing 110 mm dia high pressure PVC spigot and socket, waste and ventilating pipes ISI marked including fitting with approved adhesive etc.including carriage of materials within all leads and lifts :-
239	Providing and fixing stainless steel A ISI 304(18/8) kitchen sink AS PER IS 13983 with C.I. Brackets and stainless steel plugs 40 mm including painting or fitting or bracket cutting and making good the wall wherever required including carriage of materials within all lead and lift. Sink No KCG 1012( size 810x450) bowl depth 200 mmof cera with drain board including carriage of materials within all leads and lifts :-
240	Excavation in earth work in all heights and depths in all kinds of soil including saturated soil comprising of pick work, jumper work, blasting work both in soft and hard rock with chiseling and wedging out of rock (where blasting is prohibited) and their intermediate classification of soil including, dewatering where ever required, setting out to required lines,level as shown on the drawing as directed by the Engineer-in-Charge at site, according to HP.PWD specifications of 1990 ( One thousand nine hundred ninety) Volume-1(One) and sorting out useful/un-useful materials and transportation of the unusefull materials for disposing at dumping site ( to be arranged by the conctractor) as per satisfaction of Engineer-in-Charge through all ,modes of transporation including head load, animal load or mechnical means alongwith its levelling fine dressing and with all kinds of labour, machinaries, tools equipments and safety measures and incidental necessary to complete the work by mechanical means and labours ( If required). All usefull materials such as stones, shingles aggregate and slate shall be properly stacked at siteto the minimum possible extent of 0.000 cubic metre @ Rupees 300/- only (Rupees Three hundred er cubic metre) shall be effected on pro-rata basis in all circumstances and disposal off surplus material in all leads and lifts through all modes of transportation as per the direction of Engineer-in-Charge. Any loss to the pulic and private property during the course of execution and disposal of serviceable and unserviceable materials shall be the absolute responsibility of the contractor and shall have to be duly compensated by him in all respected including all incidental charges.
241	Earth work in excavation for structures as per drawing and technical specification clause 305.1 including setting out, construction of shoring and bracing removal of stumps and other deleterious materials and disposal upto a lead of 50.00 metre dressing of sides and bottom and back filling in trenches with excavated suitable materials ordinary soil up to 3.00 m depth.including carriage of materials within all leads and lifts
242	Providing and laying Plain Cement concrete Grade M-10 (Nominal mix 1:3:6 ) for plain/reinforced concrete in open foundationsand similar works including form work and curing complete as per drawings and technical specifications Clause 802, 803, 1202 & 1203including carriage of materials upto all leads and lifts.
243	Providing and fixing 100mm Dia PVC weep pipes in brick / stone masonry / plain concrete / RCC / abutment / wing wall / return wall extending through to the full length of the structure with slope of 1 : 20 towards drawing face comoplete as per drawing and technical specification clause 614/708, 1204.3.7 including carriage of materials upto all leads and lifts.
244	Backfilling behind abutment, wing wall and return wall complete as per drawings & technical specification Clause 1204.3.8 including carriage of materials upto all leads and lifts. Please Enable Macros to View BoQ information

Also Visit

Tenders

Himachal Pradesh Tenders

Construction Tenders

Building Construction Tenders

Building Work Tenders

Disclaimer

We takes all possible care for accurate & authentic tender information, however Users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender.

Top

Tender For Construction Of State Of The Art Model Drug De-Addiction Centre And Rehabilitation Centre At Kotla Barog Tehsil Pachhad Distt. Sirmour H.P (Sh:- Construction Of Civil Work, W/S & Si Work, Septic Tank, Rain Harvesting Tank, Soak Pit And Sit, Sarahan-Himachal Pradesh

Disclaimer

About Us

Services

Browse Tenders

For Sales Inquiry

Tender For Construction Of State Of The Art Model Drug De-Addiction Centre And Rehabilitation Centre At Kotla Barog Tehsil Pachhad Distt. Sirmour H.P (Sh:- Construction Of Civil Work, W/S & Si Work, Septic Tank, Rain Harvesting Tank, Soak Pit And Sit, Sarahan-Himachal Pradesh

Disclaimer

OTP Verification

About Us

Services

Browse Tenders

For Sales Inquiry

Connect With Us