|
| 1 | FOR: MALE & FEMALE WARD |
| 2 | Supply, installation, testing and commissioning of Electric Motor Driven Terrace Booster Pump 900 LPM at 35 mtr head including pump foundation and all accessories (Make: Kirloskar/Equivalent) |
| 3 | Supply, Erection, Commissioning, & Testing of weather proof control auto start panel for pump including all accessories. (Make: GreenPower/Equivalent) |
| 4 | Supply, Installation, Testing and Commissioning of Stainless steel Hydrant Valve/Landing valve 63mm NB size, single headed oblique type, as per IS:5290/93 and as per direction of Engineer-In-Charge (Make: Atashee/NewAge/ Safepro/Equivalent) |
| 5 | Supply, Installation, Testing and Commissioning of SS short branch pipe with 63mm male inlet and 19mm outlet nozzel, as per IS:903 and as per direction of Engineer-in-charge. (Make: Atashee/NewAge/ Safepro/Equivalent) |
| 6 | Supply, Installation, Testing and Commissioning of 63mm NB and 15 meter long RRL Fire Hose fitted with 2 nos of 63mm instantaneous stainless steel male & female SS coupling, complete by GI wire binding for Internal Hydrant as per direction of Engineer-in-charge. (Make: Atashee/NewAge/ Safepro/Equivalent) |
| 7 | Providing Supply and fixing of MS Hose Box for of suitable size ( 750X600X250mm) to accommodate 2 nos of 15/1 no of mtr long fire hose and a branch pipe, wall mounted type as per direction of Engineer-in-Charge. Make: Any standard |
| 8 | Supply, Installation, Testing and Commissioning of Swinging pattern wall fixing first aid hose reel made from MS Sheet and waterways and moving parts with rubber hose of 20mm dia. And 30 meters long with ABS(plastic) shut-off nozel as per IS:444/IS:12585 Type-I., complete with all accessorises as per direction of Engineer-incharge. (Make: Atashee/NewAge/ Safepro/Equivalent) |
| 9 | Proving, fitting and fixxing of C.I 25mm single air relief valve with stop cock confirming to IS: 14845/2000 with ISI marks for water works purpose including fixing the same with hydrant riser including testing & commissioning the system etc. all complete as per approved specification & direction of incharge. (Make: Kartar/ Equivalent) |
| 10 | Proving, fitting and fixxing of 2WAY fire bridge connection consisting of 63mm dia SS instantaneous type male couplings with biult-in check valves, 150mm dia flanged outlet comlete with bolts, nuts and rubber insertions confirming to IS:904 with ISI mark including testing & commisiioning the system etc. all complete as per approved specification & direction of EIC. (Make: Atashee/NewAge/ Safepro/Equivalent) |
| 11 | Providing, fitting and fixing of following size cast iron doubleflanged type dual plate Non Return Valve as per IS:- 5312 (Part I): 2004 with ISI mark of pressure rating PN 1.60 including fixing the same with supply of required jointing materials like flanges, rubber insertions, MS nuts & bolts, paint etc and testing the joints with required water pressure etc all complete as per specification & direction of Engineer-in-charge (Make: Kartar/Safepro/Equivalent) |
| 12 | Supply, Installation, Testing & Commissioning of C Class heavy duty MS Pipe with flanges and fitting such as bends, tees, reducers, rubber insertions and galvanised nuts and bolts of following size on surface along wall/ shaft with MS bracket, suspended from ceiling/beam with suspenders duly painted with two coats of primer and finished with enamel paint of approved colour laid through pipe or in trench after wrapping with nhassen cloth after applying coal tar primer as required as per direction of Engineer-in-charge (Make: Jindal/Bansal/Apollo/Equivalent) |
| 13 | 100 mm NB |
| 14 | 80 mm NB |
| 15 | Providing, fixing, testing and commissioning of following size manually operated hand lever type cast iron double flanged slim seal wafer type Butterfly valves with EPDM iron disc as per IS-13095 having pressure rating PN-1.60 including fixing the same with supply of required jointing materials like rubber insertion, MS nuts & bolts, paint etc, and testing the joints with required water pressure etc all complete as per specification & direction of E.I.C (Make: Kartar/Safepro/ Equivalent) |
| 16 | 100 mm NB |
| 17 | 80 mm NB |
| 18 | Supply, Installation, Testing & Commissioning of Pressure gauge of 0-16 Kgf/sq.cm range with cut off bronze ball valve of suitable size with all accessories as per direction of Engineer-in charge (Make: Guru/Equivalent) |
| 19 | Supply and Erection of MS flanges, Bends, Tee, Nuts & Bolts, Anchor Fasteners, Gaskets and other MS accessories |
| 20 | Supply, Installation, Testing & Commissioning of Pressure Switch with cut-off bronze ball valves with integral strainer & flare nut (mixed ends) of suitable size with all accessories as per direction of Engineer-in-charge (Make: Indfoss/ Equivalent) |
| 21 | Supplying and laying of UPVC pipe of 2\\" dia for water supply connection to fire water tanks |
| 22 | Supply and installation of PVC Storage tank of total 5000 ltr above top roof slab including pedestal and connection accessories (Make: Mukta/Equivalent) |
| 23 | Supply and installation of PVC Storage tank of total 10000 ltr above top roof slab (5000 ltr x 2 nos) including civil pedestal/foundations, valves, bends and all connection accessories (Make: Mukta/ Equivalent) |
| 24 | FIRE EXTINGUISHERS:- Portable Fire Extinguisher System Supplying, installation, testing and commissioning of CO2 type Fire Extinguisher 4,5 kg capacity conforming to IS:2878 made from ISI marked seamless cylinder confirming to IS:7285, fitted with ISI marked controlled valve confirming to IS: 3224, high pressure 1 Mtr discharge hose & horn complete with initial gas charged with carrying handle & wall mounting bracket as per direction of Engineer-in-charge (Make: Sunmax/ Atashee/Safepro/Equivalent) |
| 25 | Supply, installation, testing and commissioning of ABC type fire extinguishers of 6 Kg capacity including cost of all material & labour etc (Make: Sunmax/ Atashee/Safepro/Equivalent) |
| 26 | Supplying, installation, testing and commissioning of Mechanical Foam type 9 litre capacity Fire Extinguisher, ISI marked IS: 10204, containing 540 ml AFFF liquid ISI marked, IS: marked, IS: 4297 complete with gunmetal union cap, nylon hose with plastic foam making branch and wall mounting bracket as per direction of Engineer-in-charge (Make: Sunmax/ Atashee/Safepro/Equivalent) |
| 27 | Supplying, installation, testing and commissioning of Addressable Multi Detector (Smoke cum Heat) complete with base and isolator as per direction of Engineer-in-charge. (Make: Morley/Honeywell/RAVEL/Equivalent) |
| 28 | Supplying, installing ,testing and commissioning of break glass type Manual call point . The Manual call point with monitor module shall be single stage type with all accessories and suitable sinages complete., the Manual call point shall be as per technical specification and shall be of EN and LPCP listed. (Morley/Honeywell/RAVEL/ Equivalent) |
| 29 | Supplying, installing ,testing and commissioning of Hooter Cum Strobe at 85 dBA @ 3m for Audible annunciation and 75cd flashing at 1 Hz for visual indication. With Control Module. The Hooter cum Strobe with Control Module shall be flush or surface mountable type with all accessories etc., complete and as per technical specification. The devices shall be of EN and LPCPlisted (Make: RAVEL/MORLEY/Honeywell/ Equivalent) |
| 30 | Supplying and drawing of 2X1.5 sq.mm PVC insulated PVC Sheathed FRLS armoured cable in the existing surface with all accessories as per direction of Engineer-in-charge. (Make: Polycab/Finolex/ Equivalent) |
| 31 | SITC of Microprocessor based Addressable Fire Alarm Control Panel (2 Loop) suitable for serving the followingg detectors & Devices in maximum with LCD display, complete with) 2 Nos 12 Volt 40 Ah SMF battery, Battery backup as per direction of Engineer-incharge. (Make:Morley-Honeywell/RAVEL/ Equiv) |
| 32 | Supply and erection of MS Structure for 1 No. Fire Water tank elevated foundation at terrace level of ground floor including accessories like channels, angles, flats, nuts, bolts, rivetts, screws and clamps with concrete foundation for mounting support and tank connections (Make: Jindal/Bansal/Apollo/Equiv) |
| 33 | MS Channel 100/50mm |
| 34 | MS Angle 50/50mm |
| 35 | MS Plate of 250mm x 250mm x 10mm |
| 36 | MS Plate of 150mm x 150mm x 10mm |
| 37 | MS Miscellaneous items incuding pedestals etc |
| 38 | Supply & Installation of 8 gm Portable Aerosol based Automatic Fire Extinguisher (Coverage: 0.08 m3), EN 15276-1:2019 and EN 15276-2:2019 ,ISO 15779:2011 approved ,capable for extinguishing Class A, B, C & E fire, non-corrosive, non-conductive, non-toxic, activation temperature 70 deg-180 deg Celcius including all accessories as per the direction of Engineer-in-Charge. Replacement warranty on the product shall be 3 years and shell-life of 10 years. Make-Pyrogen/Genefire/Stat-x/Equivalent |
| 39 | Supply & Installation of 20 gm Portable Aerosol based Automatic Fire Extinguisher (Coverage: 0.2 m3), EN 15276-1:2019 and EN 15276-2:2019 ,ISO 15779:2011 approved ,capable for extinguishing Class A, B, C & E fire, non-corrosive, non-conductive, non-toxic, activation temperature 70 deg-180 deg Celcius including all accessories as per the direction of Engineer-in-Charge. Replacement warranty on the product shall be 3 years and shell-life of 10 years. Make-Pyrogen/Genefire/Stat-x/Equivalent |
| 40 | Supply & Installation of 30 gm Portable Aerosol based Automatic triggering through linear heat detection cable/electrical initiation Fire Extinguisher (Coverage: 0.3 m3) , EN 15276-1:2019 and EN 15276-2:2019 ,ISO 15779:2011 approved ,capable for extinguishing Class A, B, C & E fire, non-corrosive, non-conductive, non-toxic, activation temperature 70 deg-180 deg Celcius including all accessories as per the direction ofEngineer-in-Charge. The triggering device should be compatible with linear heat detector to detect heat and should use industrial lithium ion battery with 10 yrs service life to supply electrical power in order to activate the aerosol module.Replacement warranty on the product shall be 3 years and shell-life of 10 years. Make-Pyrogen/Genefire/Stat-x/Equivalent |
| 41 | Supply & Installation of 60 gm Portable Aerosol based Automatic triggering through linear heat detection cable/electrical initiation Fire Extinguisher (Coverage: 0.6 m3) , EN 15276-1:2019 and EN 15276-2:2019 ,ISO 15779:2011 approved ,capable for extinguishing Class A, B, C & E fire, non-corrosive, non-conductive, non-toxic, activation temperature 70 deg-180 deg Celcius including all accessories as per the direction ofEngineer-in-Charge. The triggering device should be compatible with linear heat detector to detect heat and should use industrial lithium ion battery with 10 yrs service life to supply electrical power in order to activate the aerosol module. Replacement warranty on the product shall be 3 years and shell-life of 10 years. Make-Pyrogen/Genefire/Stat-x/Equivalent |
| 42 | Supply & Installation of 100 gm Portable Aerosol based Automatic triggering through linear heat detection cable/electrical initiation Fire Extinguisher (Coverage: 1 m3) , EN 15276-1:2019 and EN 15276-2:2019 ,ISO 15779:2011 approved ,capable for extinguishing Class A, B, C & E fire, non-corrosive, non-conductive, non-toxic, activation temperature 70 deg-180 deg Celcius including all accessories as per the direction ofEngineer-in-Charge. The triggering device should be compatible with linear heat detector to detect heat and should use industrial lithium ion battery with 10 yrs service life to supply electrical power in order to activate the aerosol module. Replacement warranty on the product shall be 3 years and shell-life of 10 years. Make-Pyrogen/Genefire/Stat-x/Equivalent |
| 43 | Supply & Installation of 50 gm aerosol based Manual Fire Extinguisher (Duration:10-20 sec) , EN 15276-1:2019 and EN 15276-2:2019 ,ISO 15779:2011 approved ,capable for extinguishing Class A, B, C & E fire, non-corrosive, non-conductive, non-toxic, activation temperature 70 deg-180 deg Celcius including all accessories as per the direction ofEngineer-in-Charge. Replacement warranty on the product shall be 3 years and shell-life of 5 years. Make-Pyrogen/Genefire/Stat-x/Equivalent |
| 44 | Supply & Installation of 3.3 Kg Manual aerosol based Fire Extinguisher covering 150m3 for big fire (Throwable unit) , EN 15276-1:2019 and EN 15276-2:2019 ,ISO 15779:2011 approved ,capable for extinguishing Class A, B, C & E fire, non-corrosive, non-conductive, non-toxic, activation temperature 70 deg-180 deg Celcius including all accessories as per the direction ofEngineer-in-Charge. Replacement warranty on the product shall be 3 years and shell-life of 10 years. Make-Pyrogen/Genefire/Stat-x/Equivalent |
| 45 | Supply and installation of linear heat detection cable compatible with aerosol based fire extinguisher as per the direction of Engineer-in-charge. Make-Pyrogen/Genefire/Stat-x/Equivalent Please Enable Macros to View BoQ information |
