|
| 1 | Dismantling of Asbestos cement (corrugated, semicorrugated, etc.) sheets in roof coverings complete all as specified and directed. |
| 2 | S & F painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws including dismantling of Plain or corrugated AC Sheet, including Nainital or similar pattern roof coverings complete all as specified and as directed. |
| 3 | Dismantling timber scantlings (Purlins/Rafters) any sec and size, in any position complete all as specified and as directed. |
| 4 | S&F steel work (tubular/hollow) in trusses, rafters, beams, purlins etc, including special shaped washer etc. complete using ERW or induction butt welded tubes conforming to IS 1161-1979 grade St.-240 complete all as specified and as as directed. |
| 5 | M&L for preparation of New or previously untreated steel or iron surfaces of any description, not otherwise, described, over 10cm width or girth and painting with two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and as directed. |
| 6 | Demolition of wall and ceiling boards (fibre, pulp, insulation, etc) or insulation boards / slabs / blankets, any thickness, including cover fillets complete all as specified and directed. |
| 7 | M&L for 4mm thick non asbestos fibre cement building boards fixed or laid/inserted to timber/GI/aluminium frame work with screws fixed in ceiling flat or sloping complete all as specified and directed. |
| 8 | S & F powder coated aluminum alloy interlocking snap grid 605mm x 605 mm consists of Main Tee runners of size 38mm x 38mm x 1.5mm and cross Tee of size 38mm x 38mm x 1.5mm, spaced between the main Tee at 600mm centre to centre to form a grid of 605mm x 605mm complete all as specified and as directed of approved make. |
| 9 | Demolition of brickwork of stone/boulder masonry, built in cement mortar or cement lime mortar including all quoins, arches, pillars etc, but excluding ashlars facings, dressed stone work and precast concrete articles complete all as specified and as directed. |
| 10 | M&L for Brickwork with fly ash old size bricks, straight or curved on plan exc 6m mean radius, built in CM (1:6) complete all as specified and as directed. |
| 11 | Taking down cement plaster any description on brick or stone walls etc including racking out joints hacking for key scrubbing down with water etc complete all as specified and directed. |
| 12 | M&L for Rendering 10 mm thick with Ready Mix Plaster of Make- ACC’s “ACCOPLAST” / CK Birla’s “AEROCON” / Speed Dry Mix’s “ECO PLASTER” / “MAGIC PLAST” / “BUILDWELL on brick work or concrete surfaces/fins/facia/ etc complete all as specifed and directed. |
| 13 | M&L for Rendering 15 mm thick with Ready Mix Plaster of Make- ACC’s “ACCOPLAST” / CK Birla’s “AEROCON” / Speed Dry Mix’s “ECO PLASTER” / “MAGIC PLAST” / “BUILDWELL on brick work or concrete surfaces even and smooth without using extra cement complete all as specifed and directed. |
| 14 | M & L for 1.50 mm thick cement based wall care putty on wall/fins/facia/concrete new plastered surfaces for smoothness of surfaces including rubbing sanding with sand paper complete all as specified and as directed. |
| 15 | M&L for preparing new plastered or unplastered surfaces putty prepared surfaces of walls, fins/facia/concrete surfaces and applying a coat of interior primer over two coats of oil emulsion distempering complete all as specified and directed. |
| 16 | M&L for complete removal of existing treatment of walls with mechanical means/grinders etc and applying two coat of cement based putty (JK/Birala wall care putty) to make surface smooth including rubbing and sanding with sand paper and appling one coat of interioe primer over two coats of distempering with distemper oil emulison (any tint) complete all as specefied and directed. |
| 17 | M&L for preparation of new plastered surface of wall/fins/facia/chajjas etc incl filling of cracks/holes with cement based exterior wall care putty and applying two coat of exterior weather proof 100% anti fungal acrylic smooth emulsion with silicon additives over a coat of exterior primer, exterior wether proof offer anti alge high performence exterior emulsion apex wall finish with 05 years of performance warranty by manufacturer applied by using Airless spray technology with max working pressure of 3300 PPSI and capable of operating single spray gun with a max material hose length of 30 mtr the spray machine should be of reputed manufacture with pro guard technology and capability of tracking pressure and paint usage and certified by paint manufacturer and as mentioned in PS and accessories for applying exterior emulsion apex, should be able to spray in hard to reach areas and penetration on the surface to achive excellent application using limited manpower of any tint complete all as specified and directed. Make : Asian (Apex ultima), Berger (Weather coat), Nerolac (Excel total). |
| 18 | M &L for complete removal of existing treatment from walls/fins/facia/chajjas etc on old surfaces incl fillinf of holes/cracks with cement based exterior wall care putty and preparation of surface and applying two coat of exterior weather proof 100% anti fungal acrylic smooth emulsion with silicon additives over a coat of exteriour primer, exteriour weather proof offer anti alge high performance exterior wall finish with 5 years of performance warranty by manufacturer applied by using Airless spray technology with max working pressure of 3300 PPSI and capable of operating single spray gun with a max material hose length of 30 mtr the spray machine should be of reputed manufacture with pro guard technology and capability of tracking pressure and paint usage and certified by paint manufacturer and as mentioned in PS and accessories for applying exterior emulsion apex, should be able to spray in hard to reach areas and penetration on the surface to achieve excellent application using limited manpower of any tint complete all as specified and directed. Make: Asian (apex ultima), Berger (wather coat), nerolac (excel total).Notes for Periodicals :- Passing of work in stages conractor shall get passed following stages for each Qtr wise by the engineer in charge in following orders before progressing to the next finishes and rate quote shall be deemed to be included no extra rate will be provided on account of this. Hence contractor shall quote the rate accordingly:- (a) After complete removal of existing treatment on walls/ceiling/ facia/ parapet etc (b) JK /Birla wall care putty each coat on walls/ceiling/facia/parapet etc.(d) Application of primer (e) 1st coat of Exteriour emulsion/acrylic emulsion.(f) 2nd coat of Exteriour emulsion/acrylic emulsion. |
| 19 | Taking down chowkhats or frames (without taking off shutters from the frame) n. exc 1.5 Sqm incl cutting holes and making good reqd shape for hold fast block for new frame complete all as specified and directed. |
| 20 | Taking down chowkhats or frames (without taking off shutters from the frame) exc 1.5 Sqm and n. exc 4.00 Sqm incl cutting holes and making good reqd shape for hold fast block for new frame complete all as specified and directed. |
| 21 | Taking down shutters of any description exc 1 sq.m and n exc 2 sqm each complete all as specified. |
| 22 | S & F for 30mm thick factory made Flush shutters, solid core construction, with block board core and plywood face panels,commercial type on both sides complete all as specified and as directed. |
| 23 | S&F 18 mm thick Plywood BWR type BB, fixed with screws to timber frame work on wall all as specified and directed. |
| 24 | M&L for decorative laminate type I,of surface finish ,colour and pattern as approved fixed with approved adhesive as per maker's instruction, 0.9mm thick laminate complete all as spd and directed. |
| 25 | S & F powder coated aluminium sliding window, three track shutters with sash bars, locking rails, locking arrangements including necessay joinery cleats, glazing clips, rubber packing, aluminium three track chowkhats, aluminium snap beading, screws, suitable handle etc with and including black tinted sheet glass of 4 mm thick and incl stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperature 1.40 mm, sliding window shutters aluminium sections weighing not less than 0.55 kg/m and size of three track chowkat, thickness of aluminium member shall not be less than 1.40 mm thick complete all as specified and directed and fixed . |
| 26 | S & F for powder coated aluminium ventilator shutters with frame not less than 0.55 Kg/Rm, half bottom portion fixed with 4mm thick glass with fixed type shutter and top half portion lower type with 4mm thick frosted glass and outer side fixed with stainless steel wire mesh, shutters aluminium sections weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws, necessary aluminium fittings etc complete all as specified and directed. |
| 27 | S&F Factory made single extruded WPC (Wood Polymer Composite) solid door/ window/Ceosetory windows & other Frames/ Chowkhat of size 65x100 mm single rebate comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2, modules of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/ moisture proof and fire retardant 152 SECTION 8 and fixed in position with MS hold fast/lugs/SS dash fasteners of required dia and length complete as per direction of Engineer-in-Charge. (M.S. hold fast/ lugs or SS dash fasteners shall be paid for separately). ® Note: For WPC solid door/window frames, minus 5mm tolerance in dimension i.e. depth and width of profile shall be acceptable. Variation in profile dimensions on plus side shall be acceptable but no extra payment on this account shall be made. complete all as specified and as directed. |
| 28 | S&F 30 mm thick moulded Prelaminated both side WPC factory made 100% solid door (conforming as per IS-4020) made from 100% lead free single extruded with 2, 4 or 6 raised panel design on the front side with 10 mm deep mould on both side with wood grain texture both side with density not less than 600 Kg/cum. Manufactured by an ISO : 9001-2015 certified company. The door should be water proof, termite proof, fire retardant and having screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50N/ mm2, modulus of elasticity 850N /MM2 and resistance to spread of flame of Class A category with property of being termite/ bore proof, water/moisture proof and fire retardant. WPC to be laminated with PVC foil of minimum 14 microns thick of approved design pasted with hot melt adhesive on both faces of shutter and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S. screws, all as per direction of Engineer-in-Charge. (Note : Stainless steel butt hinges and necessary SS screws shall be paid separately) |
| 29 | S&F 100 mm long butt hinges stainless steel complete fixed with full body threaded Star headed counter sunk SS screws all as specified and as directed. |
| 30 | S & F Aluminum Anodised 150mm size barrel tower bolt with bright bolt complete all as specified and as directed. |
| 31 | S & F Aluminium handles, cast type, anodised handle 150 mm complete all as specified. |
| 32 | S & F for 300mm long aluminium alloy anodized sliding door bolts with Hasp and staple (bolt type) and fixing clips of sheet, cast or extruded section and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy complete all as specified and as directed. |
| 33 | S&F for aluminium floor door stoppers double legged length 140mm with hard drawn steel spring fitted in floor complete all as specified and as directed. |
| 34 | Dismantling wrought iron or mild steel work of any description not otherwise provided for, complete all as specified and as directed. |
| 35 | S&F for MS framed work such as grills, gratings etc., with ends of bars shouldered and/or riveted, or forget into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe 410-0 or Fe 310-0 all as specified and as directed. |
| 36 | S & F in repair 25mm dia 1 to 1.5mm thick stainless steel curtain rod with SS brackets, stops, rollers, sides knobs /glove funnel etc. complete all as specified and directed. |
| 37 | M & L for fabrication & fixing to horizontal & vertical shelves/ partations /sides/ top/ bottom/back sides etc for Modular kitchen cabinate/ wardrobe/ cupboard/drawers made out of 17/18 mm thick HDHMR boards (Water/termite proof) with white laminated colour on both sides, of approved quality including paste to all exposed edge by edge Banding Tape including provision of cabinet for keeping baskets/ drawers etc and including taking down existing shutter/panel/partition and all other accessories in any type and any position complete all as specified and as directed. (Make :Action tesa/kitply or Archid) |
| 38 | M & L for Fabrication & fixing to front side /all exposed sides of Modular kitchen cabinate/ wardrobe/ cupboard/drawers made out of 17/18 mm thick HDHMR UV, glossy/maat finish boards front side and other side white UV boards edges duly bonded with PVC taping to match the colour of UV boards all around including provision of cabinet for keeping baskets/ drawers etc and including taking down existing shutter/panel/partition and all other accessories in any type and any position complete all as specified and as directed. (Make :Action tesa/kitply or Archid) |
| 39 | S & F Continuous (piano) hinges, stainless steel, width of flap 30mm complete all as specified and as directed. |
| 40 | S & F 150 mm size designer handel stainless steel cromimum plated for Cabinet/Wall Unit/Overhead Unit/Wardrobe etc complete all as specified and as directed. |
| 41 | S & F for Magnetic catches with steel body ‘H’ type, fixed to shutter, complete all as specified. |
| 42 | S&F in repairs glazed earthen ware viterous china wash down water closet (pedestal pattern) white coloured with and including plastic water closed seat, white, closed pattern with recessed bottom, and cover and mild steel chromium plated hinging device etc complete all as directed. Make Somany Cat Part No. SMART EWC P/S trap or Equivelent in Cera/Hindware/Parryware |
| 43 | S&F in repair PVC valveless flushing cistern, low level white with inlet ball valve float and handle including brackets complete fixed capacity of flush 10 ltrs complete all as specified and as directed. |
| 44 | S & F in repairs Vitreous China wash basin, white, flat back, size 580 x 480 mm with pedestal including brackets / fasteners bolt etc with 32 mm dia CP Waste fittings, brass, chromium plated with PVC waste pipe complete all as specified and directed. |
| 45 | S & F in repair for 15 mm bore, fancy type, Wall Mixer 3-in-1 System with Provision for both Hand Shower and Overhead Shower Complete with 115mm Long Bend Pipe, Connecting Legs & Wall Flange and including Telephone Shower complete all as specified and as directed by Engr-in-Charge Make Jaguar Cat Part No: FLR-5281N, Hand shower HSH 1715, flexible tube SHA-549D12 or equivalent in kohlar, grohe and Roca. |
| 46 | S&F for 15mm bore, 450mm long, PVC connections with brass unions internally threaded both ends complete fixed to iron pipe at both ends as fixed in repairs complete all as specified and as directed.. |
| 47 | S&F in repair Health Faucet (ABS Body) with 1.20 M Long PVC Tube and wall Hook screwed down to GI pipe or union/angle valve complete all as specified and directed by Engr-in-charge. |
| 48 | S & F in repair CP, soap dish complete all as specified and as directed by Engr-in-Charge. |
| 49 | S&F in repair fancy type Toilet paper holder, steel chromium plated approximate size 140X140X50mm complete all as specified and as directed. |
| 50 | S&F in repair Maze Overhead Shower 200X200mm Square Shape Single Flow (Body & Face Plate Stainless Steel with Chrome Finish) with Rubit Cleaning System including showe arm of size 400x25x25mm sq shape for wall mounted showers with flange, fixing to steel pipe or union complete all as specified and directed. |
| 51 | S&F in repair brass chromium plated Tubular towel rail 20mm dia, D type, 60cm long between flanges. |
| 52 | S&F in repair PVC cabinet 450x600mm overall size with looking mirror of selected qality 5mm thick glass mounted over PVC framing complete all as specified of Make Prayag/Polytuf/Somany |
| 53 | S&F sheet glass corner wall mounted shelf assembly consisting of 8mm thick sheet glass 220mmX220mm size with chromium plated bracket guard and railing 50mm high complete all as specified and as directed. |
| 54 | S&F in repair sinks made of stainless steel 1mm thick kitchen or laboratory with plugs, washers and wastes; including bedding in cement mortar on to dwarf wall or including fixing cantilever brackets and connecting union to pipe, overall size 495mm x 420mm bowl size 410mm x 330mm x 160mm, complete all as specified and directed. |
| 55 | Demolition of stone slabs and tiles laid, bedded and pointed in any mortar of any description or thickness in floors, aprons etc complete all as specified and as as directed. |
| 56 | M&L for joint free coloured glazed ceramic tiles in vertical surface of size 300X 600X 7 to 8 mm thick of different shade colour and pattern as approved, over and including 10 mm thick rendering in CM 1:4 as backing coat finished to receive wall tiles, set and jointed in neat cement slurry and pointed in white or colour cement to match etc complete all as directed and specified. |
| 57 | M&L Vitrified tiles 8- 9 mm thick (square/rectangular) polished, area of each tiles exceeding 0.42 Sqm but not exceeding 1.00 Sqm, in floors including screed bed 15mm thick in Cm 1:6 etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match complete all as specified and directed. |
| 58 | All as per item No 57 above but in skirting over 10mm thick backing coat in CM (1:4) complete all as specified and directed. |
| 59 | M&L for non skid joint free ceramic tiles (of size 7 to 8mm thick (coloured) (Square/rectangular) area of each tile exc 0.06 but n exc 0.18 sqm, in floors, set & jointed in neat cement slurry and pointed in coloured cement over 15mm thick screed bed in CM (1:6) complete all as specified and directed. |
| 60 | M&L machine cut cudappa stone slab 20-25mm thick laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete all as specified and as directed. |
| 61 | M&L for Granite (of any type) 20mm thick machine cut, bedded and jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite stone including cutting and polishing types including 15mm thick screed bed in CM (1:6), complete all as specified and as directed. |
| 62 | M&L for chequered cement concrete tiles 30cmx30cmx20mm thick Rubber moulded with grey cement and pigment, over and including 15mm thick screed in CM (1:6), set jointed & pointed in neat cement slurry in floors complete all as specified and as directed. |
| 63 | M&L for precast cement concrete interlocking tiles 60mm thick Rubber moulded with strength 30 N/sqmm as in floor/pavement laid on 30 mm thick stone dust cushioning laid dry to the profile complete all as specified and as directed. |
| 64 | Demolition of cement concrete (unreinforced) of any description and in any position not otherwise specifically provided complete all as specified and directed. |
| 65 | M&L for cement concrete (1:4:8) type D 2 using 40mm graded stone aggregate in foundations, filling and mass concrete complete all as specified and as directed. |
| 66 | M&L for 75 mm thick PCC 1:3:6 type C-2 (using 40mm graded stone aggregate) as in plinth protection including making joint at every 3mtr interval and and corner finished even and fair and laid in alternate bays complete all as specified and directed. |
| 67 | Taking up or down 15mm bore steel tubing and connections, including cleaning for refixing or removal to store complete all as specified. |
| 68 | Taking up or down 25mm bore steel tubing and connections, including cleaning for refixing or removal to store complete all as specified. |
| 69 | S & F 16mm dia (internal dia) CPVC pipes with all fittings SDR 11 & Plain CPVC SDR 11 fixed to walls and ceilings with adequate nos of clamps or laid in floors including cutting chases in stone,concrete block or slab wall pinning in making good to facing where ever required to the sufraces for concelled water supply including CPVC brass fitting such as elbow, socket, nipple required for fixing of plumbing items complete all as specified and as directed. (Note : No extra payment shall be made for cutting chases & CPVC fittings) |
| 70 | S & F 25mm dia (internal dia) CPVC pipes with all fittings SDR 11 & Plain CPVC SDR 11 fixed to walls and ceilings with adequate nos of clamps or laid in floors including cutting chases in stone,concrete block or slab wall pinning in making good to facing where ever required to the sufraces for concelled water supply including CPVC brass fitting such as elbow, socket, nipple required for fixing of plumbing items complete all as specified and as directed. (Note : No extra payment shall be made for cutting chases & CPVC fittings) |
| 71 | S & F Rotational moulded polyethylene water storage tanks 500 lts capacity, tripple layered (cylindrical vertical with closed top) hoisted and fixed in position including 20 mm dia PTMT ball valves, high pressure, with polythene float and flynut complete, screwed for iron pipe or brass ferrule and fixed including taking out existing unserviceable overhead tank of any description complete. |
| 72 | S & F in repairs 25 mm bore CPVC gate valves, screwed to pipe of 25mm bore complete all as specified and directed. |
| 73 | Taking down eaves gutters and rainwater pipes (any size or pattern), including all fittings, heads, shoes, bends, swan-necks, etc., including cleaning or refixing or removal to Store complete all as specified and as directed. |
| 74 | S&F for 110mm bore of PVC (SWR) pipes single socketed in any length with rubber ring joints laid in trenches or in floors including fixing stac clamps complete all as specified and as directed. |
| 75 | S&F for 110mm bore of PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to wall complete all as specified and as directed. |
| 76 | S&F for 75mm bore of PVC (SWR) pipes single socketed in any length with rubber ring joints laid in trenches or in floors incl fixing stack clamps complete all as specified and as directed. |
| 77 | S&F for 75mm bore of PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to wall complete all as specified and as directed. |
| 78 | S&F PVC (SWR) bend with access door any radius 110mm complete all as specified and directed. |
| 79 | S&F PVC (SWR) bend with access door any radius 75mm complete all as specified and directed. |
| 80 | S&F forn110mm bore PVC (SWR) Junction Single 'T' equal or unequal complete all as specified and directed. |
| 81 | S&F forn 75mm bore PVC (SWR) Junction Single 'T' equal or unequal complete all as specified and directed. |
| 82 | S&F PVC (SWR) bend any radius 75mm complete all as specified and directed. |
| 83 | S&F PVC (SWR) bend any radius 110mm complete all as specified and directed. |
| 84 | S & F in repair PVC (SWR) floor trap 75 mm bore plain with grating including jointing with solvent cement and fitting complete all as spd and directed. |
| 85 | S & F stainless steel L button for kitchen cabinet and cup board shelf and fixed with SS star headed screw complete all as spd and directed. Please Enable Macros to View BoQ information |
| 86 | S & F stainless steel L button for kitchen cabinet and cup board shelf and fixed with SS star headed screw complete all as spd and directed. Please Enable Macros to View BoQ information |
