|
| 1 | Taking down chowkats or frames with shutter (without taking off shutter from the frames) n. exc 1.50 Sqm each complete all as specified and directed. |
| 2 | Taking down chowkats or frames with shutter (without taking off shutter from the frames) exc. 1.50 Sqm n.exc 4 Sqm each complete all as specified and directed. |
| 3 | Taking down shutters of any description exc. 1 Sqm but n. exc. 2.0 Sqm each complete all as specified and directed. |
| 4 | Resecuring or easing & adjusting of shutters without taking down of shutters of any description not exc 2.0 Sqm each complete all as specified and directed. |
| 5 | S&F factory made solid PVC door frame of size 50 mmx47 mm made out of 5mm thick wood grain printed PVC sheet used instead of plain colour PVC sheet & edges will be painted to match with printed sheet reinforced MS square tube supplying & fixing in opening as per specification & drawing complete all as specified and directed. |
| 6 | S&F factory made solid PVC moulded door shutter 28 to 30 mm thick (stiles, with particle board core) with 2,4, or 6 raised panel design with 2mm thick Moulded PVC sheet on the front face & 2mm plain colour PVC sheet on back face, supplying & fixing in frame at site as per specifications and drawing of page no 146 of SSR Part -II complete all as specified and directed. |
| 7 | S&F 2nd class hardwood plain solid, straight chowkat and frames, wrought, framed rebated on the solid, rounded or chamfered put together with glue pinned at joints all as specified in and directed. |
| 8 | S&F 35 mm thick, 2nd class hardwood glazed and skeleton shutters, open rebated and prepare to receive gauge etc (without sash bars) edges of framing plain, chamfered or rounded fitted with cut and mitred beads for secruing glass/gauge etc size of member of shutter as specified in SSR Part-I Section 8 Clause 8.20 (a), fitted to chowkats complete all as directed. |
| 9 | S&F 30 mm thick flush shutters solid core construction, with particle board core and ply wood face panels commercial type on both sides complete all as specified and as directed. |
| 10 | S&F35mm factory made plain framed, panelled shutter (two panel) with lock rail and panel of 9 mm BWP commercial ply or 12 mm veneered particle board with commercial veneering on both faces. The size of rail and stile as per IS-1003 (Part - I) kiln seasoned and chemically pressure treated (35 mm thick with 2nd class HW rail and style) complete all as specified and directed. |
| 11 | S&F butt hinges, cast brass, with mild steel hinge pin, bright polished of size 100 mm complete all as specified and directed. |
| 12 | S&F MS butt hinges medium weight cold rolled of size 100 mm complete all as specified and as directed . |
| 13 | S&F in repair MS butt hinges medium weight cold rolled of size 100 mm complete all as specified and as directed . |
| 14 | S&F 250 mm long aluminium alloy anodised sliding door bolt with hasp and staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy complete all as specified directed, |
| 15 | S&F in repair 250 mm long aluminium alloy anodised sliding door bolt with hasp and staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy complete all as specified directed, |
| 16 | S&F 150 mm long aluminium anodised barrel tower bolt of extruded section complete all as specified and directed. |
| 17 | S&F in repair 150 mm long aluminium anodised barrel tower bolt of extruded section complete all as specified and directed. |
| 18 | S&F Extruded aluminium alloy handles 150 mm long fabricated type anodised complete all as specified and directed. |
| 19 | S&F in repair Extruded aluminium alloy handles 150 mm long fabricated type anodised complete all as specified and directed. |
| 20 | Resecuring or easing & adjusting of shutters without taking down of shutters of any description exc 2.0 Sqm each complete all as specified and directed. |
| 21 | Supply and fixed double action concealed type floor springs (hydraulically regulated) made up of minimum 1.25 mm thick aluminium alloy sheet foundation box, main body with stainless steel top cover, governing pivot made of brass, other parts made of mild steel heavy duty complete all as specified and as directed. |
| 22 | S&F in repair stainless steel door stopper with solid stem and rubber end fixed to doors all as specified and as directed including taking down old one. |
| 23 | Hacking out old broken glass (any thickness, size, quality or description) from wooden frames or stone, concrete or brick surrounds, glazed with putty or fixed with beadsarea exceeding 1.5 sqm complete all as specified and directed. |
| 24 | S&F sheet glass 4.8 mm thick ordinary quality and glazing with oil putty or glazing pins / spring clip in square, rectangle n exc 0.5 sqm in each pan all as specified and as directed. |
| 25 | S&F old sheet glass 4.8 mm thick ordinary quality and glazing with oil putty or glazing pins / spring clip in square, rectangle n exc 0.5 sqm in each pan all as specified and as directed. |
| 26 | S&Fin stainless steel wire cloth 0.36 mm nominal dia of wire and average width of aperture 1.40 mm and fixed with tinned tacks or stainless steel wire staple complete all as specified and directed |
| 27 | S&Fin repairs stainless steel wire cloth 0.36 mm nominal dia of wire and average width of aperture 1.40 mm and fixed with tinned tacks or stainless steel wire staple complete all as specified and directed including down old one. |
| 28 | Cutting holes in brick walls exc one brick but not exc two brick in mud mortar for inserting holdfasts and making good dismantled portion in cement mortar (1:3) or cement concrete (1:2:4) Type B-1 as required complete all as specified and directed |
| 29 | S&F mild steel flat iron as in hold fast for door window frames or chowkat etc. cut to length or drilled hole and fixed with screw etc. complete all as directed grade of steel conforming to Fe-290 Gde-E-165 complete all as specified and directed |
| 30 | S&F wall mixer, cast copper alloy, screwed down, high pressure (chromium plated) with provision for overhead shower with 115mm long bend pipe on upper side, connecting legs & wall flanges etc. complete for fixing with 15 mm dia pipe, complete all as specified and directed including taking down old one. |
| 31 | S&F 10 Ltr capacity PVC valveless syphonic action type flushing cistern low level white, with inlet, ball valve, float and handle including PVC flush pipe and brackets complete fixed in wall and floor to trap of WC as required and as directed including taking down old one |
| 32 | S&F in repair angular stop cock (chromium plated fancy type) 15 mm dia, cast copper alloy, screwed down, high pressure with crutch or butterfly handles, screwed both end for iron pipe or for unions complete all as specified and directed |
| 33 | S&F in repair 15 mm bib tap, cast copper alloy fancy type chromium plated with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule complete all as specified |
| 34 | S&F in repair 15 mm tow in one bib tap, cast copper alloy fancy type chromium plated with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule complete all as specified and directed |
| 35 | S&F in repair tubular Towel rail chromium plated 20mm dia 'D' type 600 mm long including brass screws and wooden / plastic cleats complete all as specified and directed |
| 36 | S&F in repair corner/wall mounted sheet glass shelf assembly consisting of 5.5mm thick sheet glass shelf 12 cm wide with chromium plated bracket guard and railing 60cm long complete all as specified and as directed |
| 37 | M&L in repair Vitreous China wash basin, white, flat back, size 550x400 mm including suitable size of CI brackets, brass chromuum plated waste fittings 32 mm dia with long screw shanks and fly nuts, chain and plug and porcelain stopper but including brackets complete all as specified and as directed |
| 38 | S&F 15mm dia pillar tap fancy type, cast copper alloy, with capstan heads, chromium plated, screwed down high pressure, with or without lettered 'Hot' or 'Cold' with long screwed shanks and fly-nuts, screwed for iron pipe and fixed complete all as specified and as directed |
| 39 | S&F in repair 15mm dia pillar tap fancy type, cast copper alloy, with capstan heads, chromium plated, screwed down high pressure, with or without lettered 'Hot' or 'Cold' with long screwed shanks and fly-nuts, screwed for iron pipe and fixed complete all as specified and as directed including taking out old one. |
| 40 | S&F in repair chromium plated shower roses with swivel joints, 125mm size including fixing to steel pipe or union all as specified and directed |
| 41 | S&F in repair chromium plated hand shower health faucet ABB body with 8 mm dia. 1.00 m long CP flexiable pipe 15 mm bore with wall hook complete all as specified and directed including taking down old one. |
| 42 | S&F in repair PTMT grating round of size 125mm dia with waste hole of approved design complete all as specified and as directed including taking out old one. |
| 43 | S&F in repair plastic water closet seat, black, closed pattern with flat bottom, and cover and mild steel chromium plated or aluminised hinging device complete all as specified and as directed. |
| 44 | S&F in repairs sinks with drainage board made of stainless steel 1mm thick kitchen or laboratory with plugs, washers and wastes; including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe overall size 915mm x 460mm bowl size 410mm x 330mm x 160mm complete all as specified and as directed. |
| 45 | S&F in repair 20mm dia stainless steel curtain rod with catrip type with hooks/brackets fixed on walls complete all as specified and directed including taking down old one. |
| 46 | S&F in repair 15 mm dia basin mixer cast copper alloy, chromium plated, single lever, without popup waste, 450 mm braided hoses with capstan head, high pressure with long screwed shanks and fly nuts screwed for iron pipes complete all as specified and directed |
| 47 | M&L preparation of new or previously untreated wooden surface of any description not otherwise described over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified and directed. |
| 48 | Demolition of brick work or stone/boulder masonry, built in lime mortar including all quoins, arches, pillars, ect but excluding dressed stonework and precast concrete articles. |
| 49 | M&L brickwork with subclass 'B' bricks, straight or curved on plan exc 6m mean radius built in CM (1:4)complete all as specified and directed |
| 50 | Taking down cement plaster on brick or concrete wall/ceiling etc including racking out joint hacking for key, scrubbing down with water etc. complete all as specified and as directed. |
| 51 | M&L for 15mm thick plastering in cement mortar on brick/concrete wall surfaces in CM (1:6) and finishing the surfaces even and smooth without using extra cement complete all as specified & directed. |
| 52 | M&L for rendering 5 mm thick in cement mortar (1:3) on concrete surfaces as in ceilings and finishing the surfaces even and smooth without using extra cement complete all as specified & directed. |
| 53 | M&L for preparing new surfaces of walls and applying two coats of oil emulsion distemper over a coat of alkali resistant primer complete all as specified and directed. |
| 54 | M&L for preparing new surfaces of ceiling and applying two coats of oil emulsion distemper over a coat of alkali resistant primer complete all as specified and directed. |
| 55 | Dismantling floor hearth or wall tiling including cement mortar bedding (but not backing) removing serviceable tiles to store and rubbish off the premises complete all as specified and as directed. |
| 56 | M&L for coloured printed glazed ceramic tiles in vertical surface 450 x 350 x 7 mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match including 10 mm thick plastering in cement mortar (1:4) brick or on concrete surfaces of wall and finishing the surfaces fair and even without using extra cement all as specified and directed as in backing of tiles complete all as specified and directed. |
| 57 | S&F for Non skid ceramic coloured tiles 7 to 8mm th area of each tile exceeding 0.06sqm but not exc 0.11 sqm in floors etc. set and joined in neat cement slury and pointed in coloured cement to match including screed bed or bedding layer 15 mm thick in cement mortar (1:6) on floors for laying floor finish all as specified and as directed. |
| 58 | M&L for Vitrified ceramic tiles 10mm thick (Square/rectangular) polished, area of each tiles not exceeding 0.36 sqm in floors etc set and jointed in neat cement slurry and pointed in white or colured cement to matches light shed including screed bed or bedding layer 15 mm thick in cement mortar (1:6) on floors for laying floor finish complete all as specified and as directed. |
| 59 | M&L for vitrified ceramic tiles 10mm thick (Square/rectangular) polished, area of each tiles not exceeding 0.36 sqm in floors etc set and jointed in neat cement slurry and pointed in white or colured cement to matches light shed including rendering 10 mm thick in cement mortar (1:4) on wall for laying floor finish complete all as specified and as directed. |
| 60 | S&F in repair door closer hydraulically regulated designation No. 1 universal type cast aluminium body sutable for door and shutter up to 1000 mm width and of weight not more than 35 Kgs and fixed all as specified and as directed including taking out old one. |
| 61 | M&L for PCC 1:2:4 type B1(20 mm graded stone aggregate) as in bed block for embedding hold fast of doors, window frames or chowkats including necessary form work complete all as all as specified directed. |
| 62 | M&L for cleaning of aluminium window sliding channels oiling to roller, tightning to lock, hinges, rubber gasket etc all as specified and as directed. |
| 63 | S&F in repair 600 x 450mm bevelled edge mirror of selected quality glass, mounted on 6mm thick AC building board or commercial plywood and fixed to wooden plugs with chromium plated brass screws and cup washers complete all as specified and as directed including taking out old one. |
| 64 | M&L for oiling and greasing of rolling shutter of any size and any patterrn incl scrubbing down old greasing complete all as specified and as directed. |
| 65 | S&F in repairs Ball bearing for rolling shutters of suitable size all as specified and directed. |
| 66 | Taking down aluminium window/ventilator with side hung,top hung or fixed type, sliding shutter of any description complete all as specified and directed |
| 67 | S&F anodised aluminium door/ window / ventilator shutters, sliding type with styles, rails, sash bar, sliding frame etc. all are made from anodised aluminium section all are made from anodised aluminium section weighting 0.55 kg / m including necessary jointing cleats, glazing clips, rubber packing, anodised, aluminium snap beadings, screws , aluminium handles, locking system etc complete all as specified and directed. |
| 68 | Dismantling water tanks capacity exceeding 1000 ltr but not exceeding 2000 ltr and removing to store complete all as specified and directed |
| 69 | S&F Rotational moulded polyethylene water storage tanks capacity 1000 Ltr (cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Part I® complete all as specified and as directed |
| 70 | S&F Rotational moulded polyethylene water storage tanks capacity 2000 Ltr (cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Part I® complete all as specified and as directed |
| 71 | M&L for prepration of old painted wooden surfaces of any description not otherwise described over 10cm width or girth and applying one coat of synthetic enamel paint complete all as specified and as directed. |
| 72 | M&L for preparation of old painted steel surfaces of any description over 10cm width or girth not otherwise described and applying one coat of synthetic enamel paint complete all as specified and as directed. |
| 73 | M & L preparation of old plastered surfaces of walls and applying finishing walls with Acrylic Smooth exterior emulsion (weather coat) paint of required shade old work (one or more coat applied @ 1.67 ltr/10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/10 sqm complete all as specified and directed for work upto 4 th storied. |
| 74 | M & L preparation of old plastered surfaces of walls and applying finishing walls with Acrylic Smooth exterior emulsion (weather coat) paint of required shade old work (one or more coat applied @ 1.67 ltr/10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/10 sqm) complete all as specified and directed for work from 5 th to 7th storied. |
| 75 | M & L for one coats of distemper oil emulsion including preparation of old plastered surfaces of wall complete all as specified and as directed work upto 4th storied. |
| 76 | All as per item No 75 above but above 5th to 8th storied. |
| 77 | All as per item No 75 above but on ceiling complete all as specified and as directed. |
| 78 | Dismantling of stone slabs & tiles of any description or thickness in floor, aprons etc. complete all as specified and as directed. |
| 79 | M&L Granite (of any type) slab, 20 mm thick machine cut laid over cement screed as in floor and jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of the granite stone including cutting and polishing Screed bed or bedding layer of mortar 15 mmthick in CM (1:4) for laying floor finishes complete all as specified and directed |
| 80 | S&F anodised aluminium grill, having mesh size 100mmx100mm made out 4mm wide and 3mm thick aluminium section with MS hooks of 6mm round bars two numbers each side insert into the jambs/cill complete all as specified and directed including taking down old one. |
| 81 | M&L for replacement of old spindle / washer including head for 15 mm dia brass wall mixer / basin mixer complete all as specified and directed. |
| 82 | S&F PVC flush / waste pipe 32/40 mm dia 1150 mm long fixed to walls complete all as specified and as directed including taking down old one. |
| 83 | S&F 15 mm dia PVC connections, 450 mm long with PTMT nuts of suitable size at two end complete all as specified and directed including taking out old one. |
| 84 | S&F Ball valves high pressure of PTMT with PTMT arm & highdensity plastic ball screwed for PVC Connection and fixed in cistern of 25mm dia pipe all as specified and as directed including taking down old one. |
| 85 | S&F in repair 25mm Gun-metal, globe or gate valves, with iron wheel head, screwed both ends in PPR pipe line and fixed complete all as specified and directed |
| 86 | S&F in repair vitreous China Wash down water closet pan (Pedestal Pattern), white fixed with brass screws with necessary connection with water line and sewer line etc. complete including PVC seat cover for pedestal pan complete all as specified and directed |
| 87 | S&F in repair vitreous china squatting pan, Orissa Pattern, size 580 x 440 mm white, with integral foot rests (excluding flushing cistern and flush pipe) with CI trap of suitable size ( P or S type) including connection to trap and to flushing pipe, anti syphonic pipe etc complete including provision of lime concrete bedding & making good to floor complete all as specified and directed. |
| 88 | M&L for points of contact of wood work by chemical emulsion (in oil or kerosenebased solution) @ 0.5 litre/hole by drilling 6mm dia holes at a downwardangle of 45 degree at 150mm centre to centre and sealing the same complete all as specified and directed. |
| 89 | Providing and injecting chemical emulsion for Post Constructional Antitermite Treatment of voids in masonry using chemical emulsion one litre per hole, at 300mm intervals including drilling holes at 45 degree and replugging them with cement mortar (1:2) to match the existing floors complete all as specified and directed. |
| 90 | Supplying and laying in repair of 20mm bore CPVC pipes SDR 11 & Plain CPVC SDR 11 fittings on walls/ceiling or laying in floors complete all as specified including taking down old pipe. |
| 91 | M&L CPVC Brass fittings like Brass elbow / Tee / Sockets / Reducing sockets / MBTA / FBTA / Union / Adaptor etc. suitable for fixing with steel pipe 20 mm dia CPVC pipe fixed in wall / floor complete all as specified and directed. |
| 92 | Taking up or down 15mm steel tubing and connections including cleaning for re fixing or removal to store all as specified and directed. |
| 93 | M&L for Tubes, 'medium grade' 15mm galvanised,with all fitting and fixed complete to walls and ceilings or laid in floors all as specified and directed. |
| 94 | Taking up or down 20mm steel tubing and connections including cleaning for re fixing or removal to storeall as specified and directed. |
| 95 | M&L for Tubes, 'medium grade'20mm galvanised,with all fitting and fixed complete to walls and ceilings or laid in floors all as specified and directed. |
| 96 | Taking up or down 25mm steel tubing and connections including cleaning for re fixing or removal to store all as specified and directed. |
| 97 | M&L for Tubes, 'medium grade'25mm galvanised,with all fitting and fixed complete to walls and ceilings or laid in floors all as specified and directed. |
| 98 | S&F cast iron (sand cast) soil, waste and vent pipe 100 mm bore in any length, with or without ears, with cement joints, fixed with stack clamps out of 25x5 mm flat iron and 16mm dia round iron stays, including bolts and nuts and securing ends of stays to wall or roof complete all as specified and directed including taking down old pipe upto 4th storey incl taking out old one |
| 99 | S&F cast iron (sand cast) soil, waste and vent pipe 100 mm bore in any length, with or without ears, with cement joints, fixed with stack clamps out of 25x5 mm flat iron and 16mm dia round iron stays, including bolts and nuts and securing ends of stays to wall or roof complete all as specified and directed including taking down old pipe upto 5th to 8th storey incl taking out old one |
| 100 | S&F 100 mm dia CI branch piece double, (equal or unequal) ordinary or inverted spigot or socketed type with oval access doors all as specified and directed including taking down old one. |
| 101 | S&F 100 mm dia CI branch piece single, (equal or unequal) ordinary or inverted spigot or socketed type with oval access doors all as specified and directed including taking down old one. |
| 102 | S&F inrepair cast iron bends 100mm bore of pipe (any radius ) with ducks foot or heel rest complete all as specified and directed |
| 103 | S&F in repair Cast iron floor trap 100 mm, setting and jointing to waste pipe fixed in cement concrete type B1 (1:2:4) complete all as specified and directed |
| 104 | S&F in repair 100mm diameter of outlet cast iron Nahani trap, with grating including jointing to waste pipe fixed in cement concrete type B-1 (1:2:4) all as specified. |
| 105 | Dismantling boarding, anydescription, fixed in any position with nails complete all as specified and directed |
| 106 | M&L for veneered decorative plywood, grade 1, 12mm thick (with BWR resin) with decorative faces veneers on one faces, fixed with screws to timber frame work complete all as specified and directed |
| 107 | Dismantling of wall and ceiling boards (fibre, pulp, insulation, etc.) or insulation boards/slabs/ blankets, any thickness, including cover fillets complete all as specified and as directed. |
| 108 | S&F anodised aluminium snap grid frame work for false ceiling including hangers 6 mm dia. G.I. (upto 1200mm length) adjusting level fixed to roof slabs by means of ceilling cleats made out of G.I. flat 40 x 3 mm size 60mm long and expansion hold fasteners 12.5mm dia. 40mm long complete all as specified all as specified. |
| 109 | S&F Providing and fixing Gypsum Board 600mmx600mm 12mm thick in ceiling fixed with screw as per manufacturers instructions complete all as specified and as directed. |
| 110 | S&F PVC fluted wall / ceiling panelling section of size 10mmx300mm with wall thickness of 0.80mm ±0.2mm (per Sqm). Weight is 4.90 kg ± 4%), each section consist of 10groves equidistant at 25mm of 4mm depth and a width of 5mm complete all as specified and directed |
| 111 | S&F size of grid 605x605mm Gl frame work for seamless ceiling comprising of Gl perimeter channnel 0.55 mm thick with two unequal flanges of 20 and 30 mm and web of 27 mm fixed to surrounding wall using nylon sleeves andscrews at 450 mm centre to centre/intermediate channel 0.9 mm thick having two equal flanges of 15 mm each and web of 45 mm suspended from soffit at approx 900 mm centre to centre with Gl cleat and steel expansion fasteners with and including ceiling section (not exc 1.2 m length) of 0.55 mm thickness having kurled web of 50 mm and flange of 26 mm each with lips of 10.5 mm fixed to the intermediate channel with connecting clips across the intermediate channel at 457 mm centre to centre complete all as specified and directed |
| 112 | S&F Hangers 6 mm dia. G.I. (upto 1200mm length) adjusting level fixed to roof slabs by means of ceilling cleats made out of G.I. flat 40 x 3 mm size 60mm long and expansion hold fasteners 12.5mm dia. 40mm long complete all as specified |
| 113 | M&L Providing and fixing 10mm thick plaster of paris ceiling (Gypsumanhydrous) to flat surface over 2nd class soft wood fillets, or metal frame work and reinforced with G.I. wire mesh (Fillets, metal frame work and G.I. wire mesh paid separately) complete all as specified and directed |
| 114 | Supply and fixed seamless calcium silicate ceiling made out of 1800 x 1200 mm size board of siliceous and calcareous material reinforced with cellulose fibre fixed to the ceiling section with 25 mm long self drilling and tapping screws having phillips head with under head cutter at 200 mm centre to centre, including finshing the joint of face board with pecially formulated jointing compound and 48 mm wide fibre tape to provide seam less finish (Frame work for ceiling shall be measured and paid eparately) complete all as specified and as directed. |
| 115 | M&L new surfaces providing and applying plaster of paris putty of 2 mm thickness over plastered surface to prepare the surface even and smooth and applying one coat of primer and two coats of oil bound distemper complete all as specified and as directed. |
| 116 | Scrapping worn out tarfelt and bituminous compound of water proofing treatment over RCC roof by using wire brush and blow lamps including dismantling cracked/broken PCC (if required sweeping, cleaning washing down to remove dust etc and removing rubbish debris etc n.exc 50 m from the site (s) complete all as specified & directed. |
| 117 | M&L water proofing treatment on cleaned RCC roof comprising with the following operation and as specified here-in-below :- (a) 20 mm thick (av. mimimum thickness) plastering in cement mortar 1:3 with integral WPC, finishing the plastered surfaces even and smooth over cleaned RCC roof. The plastered surface shall be cured properly for ten days by ponding of water over roof. (b) Applying bitumen primer over the plastered surface @ 0.40 Ltr / Sqm by the same membrane manufacturer of density at 25°C, 0.87 to 0.89 kg / Liter and viscosity 70-160 cps. (c) Providing and laying 3mm thick APP (Atactic Polypropylene Polymer) modified prefabricated five layer, weight not less than 3.6 kg/Sqm water proofing membrane, black finished reinforced with non woven polyester matt make as approved over the primer coat. Membrane shall be laid using butane torch and sealing all joints etc all as per Para 11.44.5 of SSR Part I. (d) Applying one coat of Aluminium paint @ 0.1 ltr per Sqm over APP based polymetric membrane complete all as per manufacturer's instruction complete all as specified and directed |
| 118 | M & L 20mm thick (avg min thickness) plastering in cement mortar 1:3, finishing the plastered surfaces even and smooth over cleaned RCC roof. The plastered surface shall be cured properly for ten days by ponding of water over roof complete all as specified and directed |
| 119 | Supplying and applying high build elastomeric water proofing coating based on pure, hydrophobic polyurethene, cold applied of spray / brush applied, smartcare PU Aqua membrane with an elangation of 450% and tensile strength>1.5 Mpa as per ASTM D 2370, crack bridging ability upto 4mm, solid content of 60% the system includes final base preparation, epoxy primer application and applying Smart Care PU Aqua or approved equivalent in two coats with a consumption of 2 Kg per Sqm on a primed surface with Apcoflor HFP 130 Primer, etc, Complete as per manufacturer specification. |
| 120 | S&F in repairs vitreous china , Half stall type, white urinal half stall pattern basin only including connections to flushing pipe and outgoing pipes fixed in repair (excluding flushing cistern, flush pipe and waste pipe) complete all as specified and directed |
| 121 | S&F in repairs water tank cover any size moulded polyethylene cover all as specified Please Enable Macros to View BoQ information |
