|
| 1 | Supply of Modular Rigid PVC Metal Panelling1) Factory made removable type Modular Metal Panelling system. The front sheet shall be constructed from preformed textured hot-dip galvanized metal with a rigid polyvinyl-chloride (PVC) film on one side and a rust-resistant coating on the other side. The sheet thickness shall be no less than 0.6mm. The overall system thickness shall range between 80-90mm.The metal panelling/partition shall be Greenguard Gold Certified from (UL / Intertek). Valid certificate to be submitted along with the technical bid.2) Tiles Perforation – To achieve acoustics without deteriorating the aesthetical appeal of the Control room it is necessary that the wall panelling shall have micro-perforations (less than 1.6mm diameter each) atleast 25% of the panelling area with a density of 5000 holes per square feet. UL audit certified design feature on modular wall panelling tile having clean perforations and providing smooth finish on front fascia of tiles. The tile shall have 5000 holes per square feet on front side of the tile. Valid UL audit certificate to be submitted along with the technical bid. 3) The modular metal panelling shall comply to the lead-free directive to ensure restriction of hazardous substances so that the final product does not contaminate the environment. The final product i.e., modular metal panelling does not contain hazardous substances and we give a healthy life to our coming generations it is necessary that the modular metal panelling system shall be RoHS certified (from UL / Intertek). Valid certificate/test report to be submitted along with the technical bid.4) Seismic safety of user & Control room equipment is a prime concern area. The metal panelling shall sustain the seismic vibrations as per design spectrum IS 1893 for zone 4 or better vibrations. The test shall be carried out by authorized government agency. Test Report to be submitted along with the technical bid.5) The wall panelling shall be robust & strong enough to sustain the routine loads/minor impacts of typical Control room environment. The wall panelling/partition structure shall have UL audit certified feature of Load bearing capacity of 300 Kgs to hold any display unit on clamp having minimum length of 750mm. Valid UL audit certificate to be submitted along with the technical bid. 6 ) As Control room is a mission critical area and in an unlikely case of damage to the existing wall panelling tiles the same shall be replaceable within 120 seconds and thereby preventing loss of time of operators and ongoing operations. UL audit certified feature of modular wall panelling tile having secure locking arrangement for equidistant mounting. Locking arrangement enables easy replacement with using any tool within 120 seconds. The feature shall provide easy flexibility of locking all tiles in one column through gravity. Valid UL audit certificate to be submitted along with the technical bid.7) From fire safety point of view the metal wall panelling tiles shall be class A fire rated as per the norms of comparative measurements of surface flame spread and smoke density measurements with that of select grade red oak and fibre-cement board surfaces under the specific fire exposure conditions. The proposed non perforated wall panelling tiles shall be Class A certified as per ASTM e84 (from UL/Intertek) for surface spread of flame and smoke generation. This is mandatory to ensure that the materials used in the interiors do not provoke fire. Valid certificate/test report to be submitted along with the technical bid.8) The structural framework shall include vertical tubular galvanized iron (GI) pipes securely installed between top and bottom GI frames. |
| 2 | Supply of Curve/Bend Modular Rigid PVC Metal Panelling1) Factory made removable type inter lockable metal panels. The frame shall consist of 25mm wide extruded aluminum top & bottom sections & die casted aluminum caps at extreme end, this frame shall hold front sheet. Front sheet shall be made up of preformed textured hot dip galvanized sheet with rigid polyvinylchloride (PVC) film on one side and on the other side a coating to avoid rust (sheet thickness 0.6mm). Overall system thickness for panelling shall be 65mm to 75mm. The metal panelling shall be Greenguard Gold Certified from (UL / Intertek). Valid certificate to be submitted along with the technical bid. The shape shall be a perfect curve to provide more space for mounting of the LED. Panelling’s curve shall be achieved by curved tiles only. Curvilinear arrangement using straight tiles (joined/ connected at angles) shall be deemed unacceptable. |
| 3 | Supply of Printed Metal Panelling1) The printed panelling shall be done on powder coated metal panelling, the front tile shall be digitally printed. Graphics shall be approved by the Customer.2) Digital printing shall be done on modular metal Panelling. Pasting stickers/flex/vinyl on metal tile shall be deemed unacceptable |
| 4 | Supply of ACP (For Exterior) ACP 4mm Thick (4050) Solid/Metallic4mm Thick, Alumunium Composite Panel, it shall consist of thermoplastic of Low Density polyethylene (LDPE) sandwiched between 2 skins of Aluminium sheets. Sandwiched composite panel finished with PVDF coated with 70% Kynar 500 and 30% Resin or Lumiflon based Fluoropolymer resin coating on approved colour and shade on face # 1. The reserve side coated with polyester - based wash coat /Polymer (Service) coating on face #2. |
| 5 | Supply of Metal/Gypsum Panelling and all associated item for instalation :Metal/Gypsum paneling material with paint for top finish. The gypsum board panels shall be fixed with screws on single side (for paneling) of G.I frame. The structure is made up of GI stud and GI Channel. The GI channel’s thickness shall be minimum 0.5mm and 120 (GSM) Galvanizing. |
| 6 | Supply of Straight Glass Partition Material (12mm thick toughened glass) 1) Full height glass partitions walls shall be made of 12mm toughened glass with frame-less structure. Proper structure shall be made to ensure the fixing of glass from RCC slab above false ceiling and holding channels on flooring.2) Straight and vertical structural members shall not be visible. Glass shall be fitted on extrusion with tool less technology and having a provision for replacing glass with perforated sheet/acoustic tile by removing the glass.3) NOTE: - The nature of installation shall be replaceable, expandable and flexible to cater the future expansion/technical up-gradation. |
| 7 | Supply of Straight Insulated Glass Unit (IGU)With multiple layered hermetically sealed glass panels with inert gas in the gap between them. Toughened 6mm Glass + 10mm air gap + Toughened 6mm Glass. |
| 8 | Supply of 12mm Thick Frameless Tempered Clear Glass DoorSize (±50mm) :- 1500mm X 2100mmWith door spring and locking arrangements and both way handle and patch fittings.Specifications : Tempered glass is formed by heating glass to the softening point in a horizontal tempering stove, and then quickly cooling it.Properties:1) Safety (tempered): when broken, it spits into tiny harmless pieces2) Strong intensity: heat-strengthened glass is approximately twice as strong as annealed glass of the same thickness, and tempered glass is about 4 times3) Outstanding performance in resisting thermal stress and wind-load4) Tempered glass cannot be cut, drill hole and other further processed. |
| 9 | Supply of 12mm Thick Frameless Tempered Clear Glass DoorSize (±50mm) :- 1000mm X 2100mmWith door spring and locking arrangements and both way handle and patch fittings.Specifications : Tempered glass is formed by heating glass to the softening point in a horizontal tempering stove, and then quickly cooling it.Properties:1) Safety (tempered): when broken, it spits into tiny harmless pieces2) Strong intensity: heat-strengthened glass is approximately twice as strong as annealed glass of the same thickness, and tempered glass is about 4 times3) Outstanding performance in resisting thermal stress and wind-load4) Tempered glass cannot be cut, drill hole and other further processed. |
| 10 | Supply of 12mm Thick Frameless Tempered Clear Glass DoorSize (±50mm) :- 900mm X 2100mmWith door spring and locking arrangements and both way handle and patch fittings.Specifications : Tempered glass is formed by heating glass to the softening point in a horizontal tempering stove, and then quickly cooling it.Properties:1) Safety (tempered): when broken, it spits into tiny harmless pieces2) Strong intensity: heat-strengthened glass is approximately twice as strong as annealed glass of the same thickness, and tempered glass is about 4 times3) Outstanding performance in resisting thermal stress and wind-load4) Tempered glass cannot be cut, drill hole and other further processed |
| 11 | Supply of Automatic Power Operated Sliding Door (with Biometric Access for Control room and other is motion sensor) including all materials, accessories, and fixing items required for complete installation.Size :- 1000mm X 2100mm1) Door shall be complete with 12mm thick frameless tempered clear glass leaf with all hardware and miscellaneous equipment. Power connection and cabling: Conceal within the Door head unit cover. Include operator, header with roller track, carrier assemblies, framing jambs, sliding door panel(s), activation, safety devices and accessories required for complete installation.2 Accessories:2.1Center Lock Housings2.2Vertical Stiles2.3 Floating Header Bars2.4 Door Patches2.5 Channels and Header Bars2.6 12mm thick frameless tempered clear glass leaf etc.. |
| 12 | Supply of Designer Metal Door covered with Preformed Textured RIGID PVC Coated GI Sheet:- Door Size (±50mm) : 1000mm X 2100mmWith door hinges and locking arrangements and both way handle. Prepare with rigid thermo fused film metal panels. Specification: 0.6mm thick Metal panel sheets, cavity filled with honeycomb inside adequate quantity. Material of the partition and that of metal door will remain the same. |
| 13 | Supply of Designer Metal Door covered with Preformed Textured RIGID PVC Coated GI Sheet:- Door Size (±50mm) : 900mm X 2100mmWith door hinges and locking arrangements and both way handle. Prepare with rigid thermo fused film metal panels. Specification: 0.6mm thick Metal panel sheets, cavity filled with honeycomb inside adequate quantity. Material of the partition and that of metal door will remain the same. |
| 14 | Supply of Designer Metal Door covered with Preformed Textured RIGID PVC Coated GI Sheet:- Door Size (±50mm) : 750mm X 2100mmWith door hinges and locking arrangements and both way handle. Prepare with rigid thermo fused film metal panels. Specification: 0.6mm thick Metal panel sheets, cavity filled with honeycomb inside adequate quantity. Material of the partition and that of metal door will remain the same. |
| 15 | Supply of Baffle ceiling1) The baffles shall be made up of CRCA Powder Coated sheet. These baffle planks shall be bent through CNC to have dimensions as 80X50mm or as per the design approval or as per EIC approval. The designer baffle ceiling shall be Greenguard Gold Certified from (UL / Intertek). Valid certificate/test report to be submitted along with the technical bid.2) Centre to Centre distance shall be minimum 150mm.3) To ensure restriction of hazardous substances; so that the final product does not contaminate the environment and we give a healthy life to our coming generations it is necessary that the metal ceiling system shall be RoHS certified (from UL / Intertek). Valid certificate/test report to be submitted along with the technical bid.4) It is well known that metal is resistant to fire as compared to wood & fabric. However, from fire and safety point of view, to ensure that the used material is not subjected to any kind of surface treatment which provokes fire. The proposed ceiling tiles shall be class A certified as per ASTM e84 (from UL / Intertek) for surface spread of flame and smoke generation. This is mandatory to ensure that the materials used in the interiors do not provoke fire. Valid certificate/test report to be submitted along with the technical bid. 5) Specifications (Finish and component details)5.1) Ceiling Baffle tile: minimum 0.7mm thick CRCA Powder Coated sheet.5.2) Carrier made of 0.60 mm CRCA steel sheet, powder coated to matching baffle colour or black as directed by the Customer. Ceiling to have arrangement to fix, hang and lock the baffles of required sizes and at required intervals. the size of punched carrier would be 35x20x35mm bent channel with holes for suspension and fixing secondary channel.5.3) The baffles top edge will have a flange of 5mm to fix in the carrier profile.5.4) Mother C Channel: minimum 0.8mm thick CRCA steel Sheet with Laser cut profiles.5.5) Suspension: The carriers would be placed at every 1200mm (maximum) and suspended by means of a secondary angle, channel fixed to the carrier at every 900 to 1200 mm and this secondary member in turn would be suspended by 8mm rod fixed to the slab by means of 8mm diameter, dash fastener. 5.6) Top Clamp: 1mm thick CRCA steel Sheet for holding the threaded rod.5.7 End Cap: minimum 0.75mm thick CRCA Powder Coated sheet. End cap similar to main ceiling baffle.5.8) Entire structure will be in powder coated CRCA sheet.5.9) Metal Strip where baffle planks will be hanged shall be sleek & sturdy.5.10) Color: As per approval.Along with Supply of 01 lot AC ducts including all materials, accessories, and fixing items required for complete installation.1. Air Handling Capacity and Ducting : Material: Galvanized Iron (GI) sheet, factory-fabricated. Gauge: 24 SWG (≤750 mm size), 22 SWG (751–1500 mm size), as per IS:655. Joints: Companion angle with neoprene gasket & fasteners. Insulation: Closed-cell nitrile rubber / fiberglass, 25–50 mm thickness as per thermal requirement. 2.Air Distribution: Designer supply and return air grilles/diffusers with powder-coated finish. Fresh air inlet and exhaust outlet ducts with dampers for proper air balancing. 3.Aesthetics & Layout: Ducts to be routed along all four sides of Control Room ceiling at different levels for uniform air distribution and good aesthetics.Conference Room ducting to be integrated with ceiling design. 4.Accessories & Fittings: Volume control dampers, fire dampers (where required), vibration isolators, flexible connections, hangers, and supports. All accessories included in contractor’s scope. 5.Standards & Testing: Fabrication and installation as per IS:655 and SMACNA standards.Leakage test, performance test, and commissioning included in scope. |
| 16 | Supply of Stretch Ceiling (Illuminated with LED luminaires)1) The ceiling shall be supplied with demountable translucent stretch ceiling membrane with harpoon, corners ready to install. It shall not get discoloured & sag. All joints shall be provided with appropriate interface trims to be able to demount the ceiling to access the lights. The ceiling shall be installed using ceiling aluminium suspension system, complete as per manufacturer’s installation guidelines and as per approved shop drawings in line with the design intent and approval by Architect/Engineer In-charge approval. LED strips shall be installed using custom aluminium extrusions to ensure longevity of the installation. The ceiling shall have following features and properties: -2) Simple and maintenance friendly: Installed in a few hours and finished product shall not require any taping, spackling, or painting, and shall be easily cleanable.3) Durable: The systems shall resist shocks and shall not crack with movement or under stretch conditions. 4) Safe: The membranes and profiles shall have passed the stringent fire and safety tests.5) The membrane shall have been classified as non-toxic upon burning. The Flexible membrane shall be b-s1-d0 / ASTM E-84 class A tested/certified.6) Green: Membranes shall be 100% recyclable.7) There shall not be any welding defect on Membranes for years to come on the perimeter edging or in the seams. |
| 17 | Supply of HEX ceiling1) Designer composite ceiling with a combination of Perforated / Non-perforated / printed / backlit hexagonal tiles.2) Perforated/non-perforated tiles shall be made up of metal panels of 0.6mm thick CRCA powder coated sheet |
| 18 | Supply of Gypsum CeilingThe false ceiling shall consist of approximately 12 mm thick gypsum boards, supported by a structure formed of GI perimeter channels. The boards shall be affixed to the wall using wood screws and metal expansion raw plugs. The gypsum boards are manufactured from an aerated gypsum core with water-repellent additives, firmly bonded to strong paper liners. The surface of the gypsum boards shall be finished with plastic emulsion paint of an approved make and shade. The gypsum boards shall comply to below standards:1.1) Surface Spread of Flame (BS-476 -Part-7): The boards shall be classified as Class 1, ensuring a high level of fire resistance.1.2) Water Absorption Class (EN-520): The boards shall meet the requirements of Class H1, indicating efficient resistance to water absorption. |
| 19 | Static Light |
| 20 | Supply of Round LED Ceiling Light High performance LED downlighter with high system efficacy for good quality and uniform lighting. Conforms to general lighting norms for office and other indoor applications. 1) Colour Temperature (K)- 3000 K / 4000 K / 5700K (as per site conditions)2) LED Efficacy (lm/W) – 100 to 1603) CRI >704) Power Consumption 6W to 24W5) LED’s life >25,000 hours @ L70 |
| 21 | Supply of MASTER LED tube integrates (Static)It integrates a LED light source into a traditional fluorescent form factor. Its unique design creates a perfectly uniform visual appearance which cannot be distinguished from traditional fluorescent. For those that are looking for value for money within limited budget and re-lamping efforts for better light effect and lifetime.1) Lumen Output - 2000 – 30002) Colour Temperature (K)- 3000 K / 4000K / 6500K (as per site conditions)3) LED’s life >25,000 hrs @ L704) CRI >705) Input Voltage Range (V) 150 - 2706) LED Efficacy (lm/W) >1507) Power Consumption (W) 20W to 32W |
| 22 | Supply of Cove light It will be a continuous rail of LED light, high brightness, neutral, or warm white with wall washing applications. Its slim profile and simple daisy-chain system allows high design flexibility to form long.1) Light source: LED2) Lumen output: 500 lm/m3) Light color: 6500K4) Power consumption: 3W/m to 5W/m5) Operating Voltage Range (V) 100 – 3006) Operating Frequency (Hz) 50 ± 3%7) Colour: White8) Lifetime: 15000 burning hrs. (At L70) |
| 23 | Supply of Wires, Modular Switches, Sockets & Conduits for Ceiling Lights and other equipment as per spec including Air condition and air purifier equipment- for replacement of control room wiring and other areas:Wires for ceiling lights inter looping and switches will be provided, consisting of PVC insulated copper conductor stranded flexible FRLS wires of 1100 volts grade of insulation in metallic conduits. Minimum size of copper conductor shall be 1.5 sq. mm for lighting and 2.5 sqmm for power. color of wires shall be Red/Yellow/Blue (or as per Local Standards) for the all single phases, Black for neutral and Green for earthing.Along with Supply and Installation of 07 nos. Bladeless Ceiling Fan with Integrated LED Lighting | Remote Control with all accessories:• Design: Modern bladeless ceiling fan with integrated LED lighting, suitable for continuous operation in control and conference rooms.• Air Circulation: Smooth and uniform airflow with low noise operation (<35 dB).• Lighting: Integrated dimmable LED light (minimum 24W), with adjustable brightness and color temperature (Cool,Warm White).• Control: Handheld remote control with fan speed adjustment (minimum 3 speeds), LED light dimming, and on/off functions.• Energy Efficiency: Low power consumption, high efficiency brushless DC motor.• Safety: Enclosed bladeless design for enhanced safety and easy maintenance.• Mounting: Ceiling mounted with concealed wiring for clean aesthetics.• Finish: Powder-coated / premium finish suitable for professional control room environment. |
| 24 | Supply of Designer Acoustic Flooring including all materials, accessories, and fixing items required for complete installation.To avoid distraction of operators because of unwanted noise generated from movement of chairs/people in the control room it is necessary that the proposed flooring shall damp such impact noises. Acoustic flooring (shall reduce impact sound by 19dB. Flooring shall be decorative type of approved shade, pattern, texture and design and of approved manufacturer. Dimensions shall be as per the final approved design and site requirement. Flooring shall be laid over concrete floor with laying compound strictly as per manufacturer’s specification.ORSupply of Designer Acoustic Flooring ( terrazzo or seamless resin flooring) including all materials, accessories, and fixing items required for complete installation.To avoid distraction of operators because of unwanted noise generated from movement of chairs/people in the control room it is necessary that the proposed flooring shall damp such impact noises. Acoustic flooring (shall reduce impact sound by 19dB. Flooring shall be decorative type of approved shade, pattern, texture and design and of approved manufacturer. Dimensions shall be as per the final approved design and site requirement. Flooring shall be laid over concrete floor with laying compound strictly as per manufacturer’s specification. (as desired by end user)Along with Carpet Flooring 400 Sq.Ft including all materials, accessories, and fixing items required for complete installation.Standard Size .Additional carpet shall be provided in the VIP visiting area, in addition to the acoustic flooring, to enhance the overall appearance. The carpet shall be of high quality, appropriately sized for the VIP area, and selected for superior design and finish. It shall be removable after the VIP visit.• Material: High-quality commercial-grade carpet (e.g., wool or premium synthetic) |
| 25 | Supply of Granite Stone for Floor Highlighter/steps in required design and pattern, with 12mm (average) thick cement mortar 1:3 (1 cement: 3 coarse sand) laid and joint with white cement slurry including pointing with white cement slurry admixed with pigment of matching shade as directed by the Engineer-in-Charge. |
| 26 | Supply of Roller/venetian blinds including all materials, accessories, and fixing items required for complete installation with remote operating mechanisim |
| 27 | Operator Console for Main Control Room |
| 28 | Supply of New Modular Control Desk1. Table-top: - The tabletop shall be made up of 12mm ASS +25mm thk.MDF board 2. Structure: - 2.1 Made of heavy duty Extruded Vertical and Horizontal Aluminium profiles . The Extrusions shall be duly powder coated with 40+ micron over all surfaces. All sheet metal parts must be finished with a durable, black, electrostatic powder coating.2.2 To allow future extension and expansion, a weld free system shall be proposed. Interconnecting joints shall not be visible. The structure shall be rigid enough to withstand BIFMA X5.5 tests. The structure shall allow easy assembly of Shutters, Slat wall, Gland Plate, Monitor arms in extremely rigid manner. 3. Slat Wall: - The floating slat wall shall be made up of 2mm thick aluminium alloy. The slat wall shall have provision to install acrylic sheet above it. 4. Monitor Arm: - Monitor arm assembly shall have auto lock, push & remove feature for quick release of VESA mounts and modular arm extensions for ease in maintenance and fixing of monitor by one technician within 30 seconds without using any tools.5 Shutters: - The shutter tiles shall be made of Powder coated MS sheet. The shutter tile shall be class A fire rated against surface spread of fire. Shutter tiles shall have ASTM e84a certified6. Side Legs: - Extreme end side leg shall have sandwich construction with 6mm thick composite material of alumina tri-hydrate & acrylic resins on either side. The periphery shall be made up of brush finish SS-304 grade. |
| 29 | Control Desk with Provision of 12 Monitors, 06 CPU, 06 Operator & 06 keyboard (with Fixed Height) CPU Size Considered : 385mm (H) x 180mm (W) x 385mm (D) |
| 30 | Control Desk with Provision of 03 Monitors, 03 CPU, 03 Operator & 03 keyboard (with Fixed Height) CPU Size Considered : 385mm (H) x 180mm (W) x 385mm (D) |
| 31 | Control Desk with Provision of 04 Monitors, 04 CPU, 04 Operator & 04 keyboard (with Fixed Height) CPU Size Considered : 385mm (H) x 180mm (W) x 385mm (D) |
| 32 | Supply of Printer Table for Printers:- 1.Table top is to be made of 25mm Thick MDF Board.2. Storage tray is to be made of CRCA Sheet3. Structure : Aluminium4. Proper Cable tray for flow of wire.Dimensions: 750 mm (H) x 900 mm (W) x 1000 mm (D) |
| 33 | Supply of Conference Table1) The conference/meeting room furniture shall conform to high standard of engineering as mentioned in the document; meeting the specified codes, standards and designs.2) The material of the working surface shall be made up of Alumina Tri-hydrate and acrylic resin material supported on minimum 12 mm thick MDF base. The top finish shall be fire retardant, waterproof, scratch resistant and shall have high hardness.3) The under structure shall be made up of 18mm thick MDF board with 2mm thick PVC edge banding tape.4) Accessories: Flap6) Cable Trays and Wiring: - The furniture shall be designed with cable trays to allow for continuous & concealed cable management across the furniture.7) Approximate minimum Dimensions – 4000mm (W) X 1500mm (D) X 750mm(H) |
| 34 | Supply of Storage Dimensions: 1000 mm (H) x 900 mm (W) x 450 mm (D) |
| 35 | Supply of 3 Seater Sofa The top shall be of Upholstery with PU Finish. The sofas are made of solid wood base, reinforced with supportive addendum in the seat. Engineered wood panels form/support the overall design structure, they synergise with the solid wood to offer unparalleled life to the product. Foam padding of multi-density and varying thicknesses provide cushion for the sofa. PU foam used is made Hennecke foam plants using German Technology capable of producing the high-quality flexible polyurethane foam. It provides unparalleled comfort, ease of use and durability. The foam used is 32 Density for seating areas and 28 Density for backrest. The supersoft foam used is in seating areas in 32-35 Density High-resilience (HR) foam which is unique and rarely used by manufacturers. Webbing: Interwoven high tensile elastic bands for optimum comfort and endurance OR As per EIC approval. |
| 36 | Supply of 2 Seater Sofa The top shall be of Upholstery with PU Finish. The sofas are made of solid wood base, reinforced with supportive addendum in the seat. Engineered wood panels form/support the overall design structure, they synergise with the solid wood to offer unparalleled life to the product. Foam padding of multi-density and varying thicknesses provide cushion for the sofa. PU foam used is made Hennecke foam plants using German Technology capable of producing the high-quality flexible polyurethane foam. It provides unparalleled comfort, ease of use and durability. The foam used is 32 Density for seating areas and 28 Density for backrest. The supersoft foam used is in seating areas in 32-35 Density High-resilience (HR) foam which is unique and rarely used by manufacturers. Webbing: Interwoven high tensile elastic bands for optimum comfort and endurance OR As per EIC approval. |
| 37 | Supply of Center tableCentre unit for sofa, Toughened Glass, 12mm Thick, Chrome Plated Pipe Frame |
| 38 | Supply of Chair:1. High Back with Sliding Seat2. Mesh Back, Cushion Headrest & fibre-filled nylon Backbone in Grey3. Auto Tilt-Tension mechanism self control with multi-position locking4. 3-Way Adjustable Armrest5. Gaslift for Seat height adjustment6. Standard 5-prong Nylon Base7. With Black Fabric Seat & MeshAlong with Supply of Recilners including all materials, accessories, and fixing items required for complete installation as per specifications.The foam used is minimum 32 Density for seating areas and minimum 28 Density for backrest. The supersoft foam used is in seating areas in 32-35 Density High-resilience (HR) foam which is unique and rarely used by manufacturers. Webbing: Interwoven high tensile elastic bands for optimum comfort and endurance OR As per EIC approval.a) 2 nos. Normal Reliners including all materials, accessories, and fixing items required for complete installation.• Sliding seat mechanism to allow seat depth adjustment, providing improved thigh support.• Upholstered with black fabric and built with high-density foam for comfort and resilienceb) 2 nos. Motorized Massage Reliners including all materials, accessories, and fixing items required for complete installation.• Sliding seat mechanism to allow seat depth adjustment, providing improved thigh support.• Upholstered with black fabric and built with high-density foam for comfort and resilience. |
| 39 | Services |
| 40 | Scope of design 1. Detailed drawings,2. Color options, 3. Design of ceiling, paneling & illumination of the control room. |
| 41 | Scope of Dismantling - This pertains solely to the removal of the current flooring, Control Desk, Doors, Windows, LVS false ceiling, and partitions. A. Note:- i) PWSPL is not responsible for any HVAC alterations, the removal of existing wiring (any kind of), control/IT panels, cable trays (located beneath the false floor), or their reinstallation. ii) Upon completion of dismantling, we will place the debris just outside the control room. The client is responsible for the subsequent disposal process. |
| 42 | Project Management/Supervision Charges for Installation & Commissioning for Control Room Interior |
| 43 | Milestone 1: Project Management/Supervision/ Installation and Commissioning Charges of Frame work of Wall Panelling / Partition work |
| 44 | Milestone 2: Project Management/Supervision/ Installation and Commissioning Charges of Frame work of Ceiling |
| 45 | Milestone 3: Project Management/Supervision/ Installation and Commissioning Charges of Flooring work. |
| 46 | Milestone 4: Project Management/Supervision/ Installation and Commissioning Charges of Doors fixing, Light Fitting. |
| 47 | Milestone 5: Project Management/Supervision Charges for Installation & Commissioning for Furniture & Finishing work. |
| 48 | Freight Charges on Supply of Interior and Furniture |
| 49 | Large Video System(E) 1) 55 inch narrow bezel LED videowall, Tiled Bezel 3.5mm, 500nits brightness, 1920*1080pixel resolution, 2*HDMI Input Port. (55\\" SCREEN 7X2 MATRIX control Room) -14 nos.. , 2)80/85 inch Large Format LED display, 4K resolution, 350-500Nits Brightness, 2 * HDMI/DVI input. (80\\" SCREEN, control Room)- 1 nos. 3) 80/85 inch Large Format LED display, 4K resolution, 350‐500Nits Brightness, 2*HDMI/DVI input. (70\\" SCREEN CONFERENCE ROOM)- 1 nos.4)55 inch Large Format LED display, 2k resolution, 350-500Nits Brightness, 2*HDMI/DVI input. (55\\" SCREEN CEILING Mounted Visitor room) – 1 nos.Mounting Accessories:(i) Wall mount Bracket for Large format Display upto 85\\"- 3 nos.,(ii) Wall mount Bracket for Narrow Bezel Video wall-14 nos. 5 ) Controller for Video wall only (7x2 Matrix) includes (i) VP4U-1408:19\\" Rack Mounted, videowall Graphic Controller for the generation of ultra-high resolution desktop and interface with direct HDMI input interface, controls up to 14 nos. 1080p (1920x1080) resolution display,accepts 8nos HDMI input, control Over LAN with wall management software- 1 nos.(ii) PR010000IP : Control PC/Laptop for Managing video wall – 1 nos. 6) Cables/Connectors/Extenders includes:(i) HDMI-HDMI Cable upto 15 meter (For Video wall)- 22 nos.(ii) HDMI-HDMI Cable upto 15 meter (For LFDs)- 3 nos.7) Audio and Control Equipment for Conference room and control room |
| 50 | Installation and Commissioning of LVS (F) |
| 51 | Freight Charges on LVS (G) Please Enable Macros to View BoQ information |
