|
| 1 | EW-AS-NC-IR) Earth work excavation for foundation in all soils and sub-soils to the required depth as may be directed except in hard rock requiring blasting but inclusive of shoring, strutting, and bailing out water wherever necessary and refilling the sides of foundation with excavated earth in 150mm thick layers standard specifications. (Including Refilling)EW-AS-NC-IR-2ma) 0 to 2m depth. |
| 2 | FL-FB-SCS) supplying and filling in foundation and basement with filling crushed stone sand in layers of 150 mm thickness well watered, rammed and consolidated complying with relevant standard specification including cost of supplying filling crushed stone sand. |
| 3 | CN-FB-PCC-1:5:10) Plain cement concrete 1:5:10 (One of cement, five of crushed stone sand and ten of hard broken stone Jelly including Mortar Plasticizer (Liquid) at 200ml per bag) for foundation and basement using 40 mm gauge hard broken stone jelly inclusive of shoring, strutting and bailing out water wherever necessary ramming, curing etc., |
| 4 | CN-FB-PCC-1:3:6) Plain cement concrete 1:3:6 (one of cement, three of crushed stone sand and six of hard broken stone jelly including Mortar Plasticizer (Liquid) at 200ml per bag) for foundation and other similar works using 20mm gauge hard broken stone jelly. |
| 5 | CN-FB-PCC-1:2:4) Plain cement concrete 1:2:4 (One of cement two of crushed stone sand and four of Hard Broken Stone jelly) (including Mortar Plasticizer (Liquid) at 200ml per bag) using 20mm gauge hard broken stone jelly |
| 6 | FW-FW-WOS-RCC) Providing Form work and centering for reinforced cement concrete works including supports and strutting up to 3.30m height FW-FB-WOS-FBa. For Column footings, plinth beam, Grade beam, Raft beam, Raft slab etc., |
| 7 | FW-SS-WS-VW) d.For vertical walls |
| 8 | MW-MS-GR) Supplying and fixing Mild Steel grills as per the design approved to verandah enclosure. |
| 9 | Supply and fixing in position of best quality of Bare Galvanium Roof sheet of 0.47mm thick |
| 10 | RW-PB-D-RMH)Supplying and fixing of Rubber Moulded Hydraulic Pressed Paver Bloc.RW-PB-D-RMH-63b) 63mm thick |
| 11 | TL-FL-GT-CM 1:3) Supplying and laying of following colour Granite Tiles (superfine polished with machine cut edges) of size 2'0 x 1'0 or 1'0 x 1'0 or 1'0 x 0'6 of 10 mm thick for flooring (Best approved quality and the same shall be got approved from the Executive Engineer before using) over cement plastering in CM 1:3 b. Ruby Red, Raw Silk |
| 12 | TL-RO-PT-CM 1:3) Finishing top of roof with one course of Pressed Tiles of approved superior quality . |
| 13 | Supply and fixing of gong bell 12\\" size suitable for 250V with ISI including labour charges and materials etc., all complete and as directed by the departmental Officers. |
| 14 | FA-SD-D-S) Supplying and fixing of Door stopper of approved make (ISI) and quality including cost, and labour charges for fixing |
| 15 | JN-GP-PHG-Tk) Supplying and fixing of following thick pin headed Glass panels with aluminium anodised ‘U’ shape beeding of size 12x12mm with 107 gram JN-GP-PHG-4mmb. 4mm thick |
| 16 | JN-UPVC D-SL-L) Providing UPVC (Un-Plasticized Polyvinyl Chloride) Door: Providing and fixing casement doors fabricated from un-plasticized polyvinyl chloride (UPVC) sections. Profiles: The profiles should be three chamber system which provides high insulation properties with outer frame 60mm x 55mm with an outer wall thickness of 2.4mm. |
| 17 | DW-D-W-F) Removing the damaged Doors and Windows including removal of frames, hinges and fastenings including all accessories without affecting the adjacent structures including the hire charges for tools and plants and scaffolding if any and clearing the dismantled materials away from the site |
| 18 | BW-FB-FLB-CM 1:5) Brick work in cement mortar 1:5 (One of cement and five of crushed stone sand including Mortar Plasticizer (Liquid) at 200ml per bag) using Fly ash bricks of size 230x110x70mm having the compressive strength of not less than 100 Kg/CM² in foundation and basement including dewatering wherever necessary proper setting, curing etc., |
| 19 | Supplying and delivery of Aluminium Ladder made of high-strength, lightweight aluminium alloys designed for durability, corrosion resistance, and structural integrity including cost of transportation from store etc., and as directed by the departmental officers |
| 20 | Supplying and fixing of Wash Basin UPVC Connection tubes in proper position to existing wash hand basin by removing existing damaged connection tubes etc.,including labour chargesetc., for fixing etc.,all complete as directed by the departmental officers. |
| 21 | Supplying and fixing of Brass Chromium plated pillar tap in proper position to existing wash hand basin by removing existing damaged pillar tap etc., including labour charge etc., all complete as directed by the departmental officers., |
| 22 | SA-IN-Spl.-Fit) Supplying and fixing of best approved quality of following CP water supply/Sanitary fittings confirming to ISI specification including cost and labour charges for fixing etc., SA-IN-CP-ACd) CP Angle cock tap |
| 23 | Supplying and fixing of Flush Tank connection tubes in proper position to existing Flushing Cistern by removing existing damaged connection tubes etc., |
| 24 | WS-IN-CP-LBT) Supplying and fixing of 15mm dia C.P Tap (Long body Tap) of Best quality including cost of tap with required specials and labour for fixing etc, |
| 25 | WS-IN-CP-SBT) Supplying and fixing of 15mm dia C.P Tap (Short body Tap) of Best quality including cost of tap with required specials and labour for fixing etc, |
| 26 | Supplying and fixing of urinal connection tubes in proper position to urinal connection by removing existing damaged urinal connection tubes etc., |
| 27 | WS-IN/EX-P-Dia) supplying and delivery of following dia pipe including cost of all materials of best approved superior quality with isi mark etc WS-IN/EX-PVC-40)e.40mm dia PVC |
| 28 | WS-IN/EX-P-Dia) supplying and delivery of following dia pipe including cost of all materials of best approved superior quality with isi mark etc WS-IN/EX-GI-BC) GI Pipes B ClassWS-IN/EX-GI-40)e. 40mm dia GI Pipe |
| 29 | Supplying and fixing of wash basin waste cup in proper position to existing wash basin by removing existing damaged wash basin connection tubes etc., |
| 30 | IN-FT-BM-PVC) supplying and fixing of BEVELED EDGE MIRROR of approved quality and brand of following size shelf type mounted in the PVC/ FIBRE GLASS FRAMED with necessary hard board backinga) 500x400x5.5mm shelf type mounted |
| 31 | WS-IN/EX-GM GV-GV) Gun Metal Gate ValveWS-IN/EX-GM GV-50f.50 mm Dia |
| 32 | SA-Ex-CI-600 x 600) Supplying and fixing of C.I. manhole cover with locking arrangements of approved quality and brand of size 600mm x 600 mm including cost of material labour charges for fixing etc., |
| 33 | SA-IN-FT-10 lt) Supply and fixing of 10 litre capacity Handle type PVC low level flushing tank (cistern - wall mounting type) of superior variety (white) with all fittings inclusive of cost of all materials, |
| 34 | WS-Ex-SP-150mmØ-lpm x m) THREE PHASE SUBMERSIBLE PUMPSET SUITABLE FOR 150MM DIA BOREWELL AS PER IS 8034/2002 WITHOUT PANEL BOARD Supply and delivery of clear water vertical wet type submersible pumpset suitable for 150mm dia borewell conforming to IS 8034/2002 as amended thereafter and BEE 3 Star Rated capable of discharging noted LPM against head of water column due to all causes. The pump shall be with stainless steel shaft and dynamically balanced bronze or Cast SS impeller, brass screws and CI FG 200 grade pump bowl/diffuser with ISI mark. The pump shall be directly coupled to a continous rated two pole suitable wet type vertical squirrel cage induction motor as per IS9283 /1995 as amended there after, suitable for operation in AC three phase 415 V+/- 10 %, 50 HZ +/- 5 %5.0 HP Submersible PumpWS-Ex-BWSM-50 x 10050 lpm x 100 m |
| 35 | WS-Ex-LC-S BW/OW) Labour charges for the erection of submersible pumpset in borewell/openwell including fixing and jointing submersible cable with proper clamps upto the starter to required depth and also fixing of riser pipes to the required depth valves erection clamps, pressure gauges upto the exterior wall of pump room and erection of panel board consisting of TPICN switches starter, Voltmeter, Ammeter, three pilot (indicating) lamps capacitor single phasing preventor, water level guard and laying and jointing the cables and twin earthing as per IE rules etc., complete and testing the pumpset and trail run for 10 days. |
| 36 | Removing the existing 5HP sump motor including service and replacing Dust bearing, 4Nos of 2\\" Bush , coil winding, oil seal, oring and Kitnut and including labour charges for servicing, test run , re-erection and transporting the motor from the site to to workshop and site etc., |
| 37 | WS-Ex-DOL-TPPB) THREE PHASE PANEL BOARD- D.O.L WITH TWO LEVEL GUARD AND AUTO START Supply and delivery of direct online starter confirming to IS13947, IEC60947-1 and as amended thereafter with suitable KW rating for operation in AC/Three Phase/50HZ (± 5%) and 415 V(±10%) including Ammeter, Voltmeter, Thermal Overload relay, 16 Amps 2 pole Magnetic Contactor with under Voltage protection, Indication lamp, starting capacitor, running capacitor and On/Off Push button switches, 5 way connector, wiring with 1 sq. mm/1.5 sq. mm copper PVC insulated cable, powder coated vermin proof box including the capacitor (the cost of capacitor is to be taken separately). WS-Ex-DOL-TPPB-5HP5HP |
| 38 | WS-IN/EX-P-Dia) supplying and delivery of following dia pipe including cost of all materials of best approved superior quality with isi mark etc all complete and as directed by the departmental officers. (the pipe should be got approved from the executive engineer before use)WS-IN/EX-UPVC-32d.32mm dia UPVC Pipe |
| 39 | SA-IN-EWC-W) Supplying and fixing EWC superior variety (white) 500mm with PVC SWR grade `P` or `S` trap including cost and fixing of double flapped coloured plastic sheet cover PVC flushing cistern in appropriate level as directed by the departmental officers at a maximum level of 5’6” and of approved brand of 10litres capacity |
| 40 | WS-IN-HW-20 FC) Supplying, laying and fixing of the following Pipe of best approved quality for Hot water line fully concealed in walls including cost of pipes and specials, labour charges for laying, jointing, testing and redoing the dismantled portions with neat finish etc., WS-IN-HW-20 GIa. 20mm dia G.I. pipe |
| 41 | Repairing and servicing the existing Industrial RO Plant including replaced wherever the materials for proper functionin etc.,all complete and as directed by the departmental officers. |
| 42 | EL-IN-EF-F) Supply and delivery of following Electric Ceiling fan with ISI mark with blades and double ball bearing, capacitor,etc., complete with 300mm down rod, canopies, capacitor, shackleblades with dimmer electronic regulator suitable for operation on 230 volts 50 HTZ single phase AC supply conforming to ISS No.374/2019 and provided with insulation .a) 48\\" Electric fan 1200mm sweep |
| 43 | EL-IN-EF-AC) Charges for assembling and fixing of ceiling fan of different sweep with necessary connections and fixing of fan regulator on the existing board etc., all complete (Excluding cost of fan) |
| 44 | EL-EX-EF-SL) Supply and fixing of LED Street lighting luminaries suitable for fixing LED Street Light Fitting with LED (light emitting diode) lower end lamp with heavy gauge aluminium sheet fabricated canopy treated primered and painted with stove enameled CRCA sheet steel contact gear cum reflector tray duly finished glossy white for optimum reflection with clear ribbed acrylic bowl fixed to aluminium frame with gasket lining secured to canopy by means of hinges for one side and foggle - catches in the other side for minimum projection against dust and water entry all prewired upto terminal block complete with all accessories such as copper wire, LED, bulb etc., complete using 25mm dia GI 'B' class pipe for 1.50m length, confirming to ISI specifications and including labour charges for fixing street light fittings in EB pole / wall etc.,EL-EX-EF-SL-25W25W LED Street Light Fitting with LED |
| 45 | EL-IN-LED.F-TL) Supply and fixing of 4' long 18 W Crystal Glass LED tube Light with ISI mark including cost of all materials twin core flex wire, TW round block and labour charges for fixing in position. |
| 46 | Supplying and fixing of 18 W LED 3000 K Square type recessed fitting with LED indoor fittings including cost of materials and labour charges etc., all complete and as directed by the departmental officers. |
| 47 | EL-IN-EF-BH) Supplying and fixing of water tight Bulk head fitting suitable for LED with guard, including ncessary connections, cost of materials .EL-IN-EF-9Wa) 9 watts LED bulb |
| 48 | EL-IN-EF-ELCB) Supplying and fixing Three phase 40 amps Earth Leakage Circuit Breaker/Residual Current Circuit Breaker (ELCB/ RCCB) 30 milli Amps Double pole (MCB and ELCB/RCCB should be of same manufacture). (Fixed in the existing Board) etc., complete and as directed by the departmental officers. |
| 49 | EL-IN-EF-EF) Supplying and fixing of following dia sweep AC exhaust fan of approved ISI Quality including necessary wall opening, fixing and finishing the wall opening and making good including cost of materials, labour for fixing, chipping and redoing necessary inter connection, scaffolding, hire charges for tools and plants.EL-IN-EF-EF225a) 225 mm dia sweep AC exhaust fan |
| 50 | EL-IN-EP-PS) Supplying and fixing 15amps 3 pin plug type socket on a suitable size MS Box 16 guage (Fire retraded box) of required thickness concealed and covered with 3 mm thick laminated hylem sheet. |
| 51 | DW-INT/EXT-CM-RE-F-5 amp SWH) Supply and fixing of 5 Amps (Flush type) switch on a suitable size MS Box 16 guage (Fire retraded box) of required thickness concealed and covered with 3 mm thick including cost of material, labour charges for fixing with required screws , hire charges for tools and plants . |
| 52 | DW-INT/EXT-CM-RE-F-5 Amp 5Pin) Supply and fixing of 5amps 5pin Combined Flush type wall Socket on a suitable size MS Box 16 guage of required thickness concealed and covered with 3 mm thick including cost of material, labour charges for fixing with required screws , hire charges for tools and plants. |
| 53 | EL-IN-EF-MCB) Supply and delivery of following Electric Ceiling fan with ISI mark with blades and double ball bearing, capacitor,etc., complete with 300mm down rod, canopies, capacitor, shackleblades with dimmer electronic regulator suitable for operation on 230 volts 50 HTZ single phase AC supply conforming to ISS No.374/2019 and provided with insulation .EL-IN-EF-FPMCBFour pole 63 Amps, 10 KA MCB |
| 54 | EL-SPN-8wMCB-32A SP MCBOW)Supply and fixing of 8 way single pole and neutral MCB sheet steel enclosure distribution board with double door (metal) with 1 no. 32A DP MCB as incoming and 6 nos. 6A to 32A SP MCB as outgoing on wall with earth connection only. |
| 55 | EL-IN-EF-FU) Supplying and fixing following porcelain fuse unit on suitable teakwood plank varnished to be fixed on the top of pole/EB street pole with necessary clamps.EL-IN-EF-3-32aFUa)3 Nos of 32 amps 500 volts grade porcelain fuse unit |
| 56 | Supplying and fixing of AC Chargeable Emergency Lamp 2 x 11W PL Lamp with all connected accessories. |
| 57 | Desilting the existing septic tank by following capacity vehicle and using compressor septic tank pump including cost of loading, hire charges, conveyance the septic tank sludge away from the town, unloading and cleaning the septic tank with water after disposal etc.,b. 6000 Litres |
| 58 | CN-F&S-PCS-M20-20/40-(5F)) Providing precast concrete slab for cupboard ward robes shelves, cover slab for chambers, Baffle walls side slabs of boxing around windows and other similar works in Standardised concrete mix M20 for the following thickness excluding the cost and fabrication of reinforcement grills but including precasting, moulding, curing, finishing and fixing in position II. 40mm thickCN-FB-PCS-M20-40a. In Foundation & basement |
| 59 | PA-Ex-IW-2C EP) Painting the new Iron work and other similar works such as PVC /ASTM Pipes, Kerb Stone and grills with two coats of approved first class synthetic enamel ready mixed paint of approved quality and brand, the paint should be supplied by the contractor at his own cost. |
| 60 | EL-IN-OEP-OLP) Wirng with 1.5 sqmm copper PVC insulated unsheathed single core 1.1 KV grade cable with surface run by means of 1.5 sqmm copper PVC insulated unsheathed single core 1.1 KV grade cable confirming to IS 694 / 1980 with ISI mark in PVC rigid conduit pipe heavy duty with ISI mark with suitable size MS box of 16g thick concealed and covered with 3mm thick laminated hylem sheet for controlled by 5 amps flush type switch including citcuit mains, cost of all materials, specials, etc., all complete, (Open wiring).EL-IN-OEP-WCRa. Light point with ceiling rose |
| 61 | EL-IN-OWR-2x2.5m2) Run of main with 2 wires of 2.5 sq.mm. PVC insulated single core multi strand fire retardant flexible copper cablewith ISI mark conforming to IS: 694/1990,1.1 kv grade cable with continuous earth by means of 2.5 sq.mm PVC insulated single core multi strand fire retardant flexible copper cable with ISI mark conformuing to IS: 694/1990,1.1. k.v. grade cable in fully concealed 19mm/20mm dia rigid PVC conduit pipe heavy dutywith ISI mark cost of all materials, specials etc., all complete. [Open wrining] |
| 62 | WS-EX-ASTM-PVC) Supplying, laying, fixing and jointing the following PVC pipes as per ASTM D - 1785 of suitable schedule (40/60/80) of wall thickness not less than the specified in IS 4985 suitable for plumbing by threading of wall thickness including the cost of suitable PVC/UPVC/GI specials /GM specials like Elbow, Tee reducers, Plug, union, bend, coupler, nipple/ GM gate valve, check and wheel valve etc., wherever required above the ground level including the cost of teflon tape, special clamps, nails.WS-EX-ASTM-32 PVCa) 32mm dia |
| 63 | WS-EX-ASTM-25 PVCb) 25mm dia |
| 64 | SA-Ex-SN8-Dia) Supplying, laying and jointing the following dia UPVC Non Pressure pipe of SN8 SDR 34 (S 16.5) as per IS 15328/2003, superior variety and tested with water, including necessary earth work excavation for trenches and refilling the same, well rammed and consolidated after the pipes are jointed and laid to proper gradiant to the alignment as directed by the departmental officers. (SN8 SDR 34 (S16.5), as per IS 15328/2003, should be got approved by the EE/SE/CE before use in works)SA-Ex-SN8-110a. 110 mm UPVC Non Pressure pipe |
| 65 | SA-Ex-SWR P-Dia) Supplying and fixing the following dia PVC (SWR) pipe with ISI mark confirming to IS 13952:1992- type `B` for soil line with relevant specials confirming to IS 14735 including jointing with seal ring confirming to IS 5382 with leaving a gap about 10mm to allow thermal expansion, fixing the pipes into walls with necessary UPVC special clamps, wooden plug, screws, holding wherever necessary and making good of the dismantled portion with necessary connections to sanitary fittings etc., complete in all respects and as directed by the departmental officers.SA-Ex-SWR P-110a) 110mm dia PVC SWR pipe including all required PVC specials etc., all complete., |
| 66 | SA-Ex-SWR P-75b) 75mm dia PVC SWR pipe including all required PVC specials etc., all complete., |
| 67 | TL-FL-CT-CM 1:3) Supplying and fixing of colour Ceramic Tiles size 305x305x6mm Anti skid without corrugated design for flooring and other similar works (Best approved quality, colour and shade shall be got approved from the Executive Engineer before using) over cement mortor 1:3 (One of cement and three of crushed stone sand including Mortar Plasticizer (Liquid) at 200ml per bag) 20mm thick |
| 68 | JN-WR-TWF-WRF) Supplying and fixing of Teak Wood wrought and put up for frames of doors, windows, ventilators, cupboard and any other similar joinery works with necessary plugs, rebates for shutters, plaster grooves on all faces .JN-WR-TWF-A 2m Fa. Teak wood over 2.00 metre and below 3 metre length |
| 69 | JN-WR-TWF-B 2m Fb. Teak wood below 2.00 metre length |
| 70 | JN-SC D-SL-FLS-2.1H) Supplying and fixing of Single leaf Solid core flush door shutters using boiled water resistance (BWR) teak wood ply as per IS 303-1989, the cross band and face veneers are to be banded with phenol formaldehyde synthetic resin in hot press both sides and manufacturing the shutter by using quality timber of termite proof and seasoned to moisture content not more than 10%, hot pressed with hydraulic press at a temperature of 150o to the norms as per IS 2002-1983 and TW Ply on Both side with teak wook lipping around, 35mm thick including cost and fixing of Aluminium furniture fittings such as 3 nos 5” butt hinges, 2 Nos 6'x1/2' Tower bolt, 2 Nos 6' Handle with CP screws, 1 No of 10'x5/8' Aldrop, 1 No 40mm dia & 60mm long rubber bush , 1 No of Door stopper with rubber bush, Brass screws and labour charges for wrought and putup and fixing in position of flush shutters and painting the TW portion with two coats using varnish two coats and as directed by the departmental officers. (The quality and brand of materials should be got approved from the Executive Engineer before use.)JN-SC D-SL-FLS-0.9x2.1b.900mm x 2100mm |
| 71 | IN-CBD-TW-OSLB) Providing T.W.double leaf shutters for cupboard/ward robes with prelaminated particle board or prelaminated cement bonded particle board for shutters. The all round frame made up of T.W. scantling of 75mmX37.50mm and the styles and rails made up of T.W. scantlings of 75mmX37.5mm. The shutters panels are not less than 8mm thick with relevant ISI mark OSL panel board including cost of OSL board and labour for fixing in position, cost of materials, Aluminium Furniture fittings such as 6 nos. 3” of Aluminium butt hinges, 2 nos. 3”x5/8” Aluminium Tower bolt, 2 nos of 4” ornamental Handle, lock and key arrangements and also varnishing with two coats for T.W. scantlings, styles and rails using best quality of wine varnish with neat finish. |
| 72 | TL-FL-IVT-CM 1:3) Supplying and fixing of Ivory colour Vitrified Tiles of size 600X600X8mm for flooring and other similar works (Best approved quality, colour and shade and the same shall be got approved from the Executive Engineer before use) in cement mortar 1:3 (one of cement and three of curshed stone sand including Mortar Plasticizer (Liquid) at 200ml per bag) 20mm thick including fixing in position, cutting the tiles to the required size wherever necessary pointing the joints with grout (Tile joint filler), curing, finishing etc., |
| 73 | JN-UPVC W-UPVC-OP W) UPVC Window Specification: Supplying and fixing UPVC (Un-Plasticized Polyvinyl Chloride) Windows of casement type (open) from the profile the size of outer frame 60mm x 58mm and shutter profile are reinforcement with GI/1mm 125GSM and 100% corrosion free, the profiles are multi chambered sections with wall thick of 2mm. The EPDM rubber (black colour) covered with over all the edges of frame and shutter the shutter will be provided with Espag multi power point locks and also it operates as handle. The corners and joints should be welded and cleaned. Radiations free pin headed plain or brown colour glass 4mm thick |
| 74 | Repairing the existing UPVC Windows including charges for removing,attending repairs to frame and Glass refixing in same position without damaging the existing structure ,cost of nessary tools and making to operatethe windows for proper open,close and locking etc., |
| 75 | BW-MW-FLB-CM 1:6) Brick work in Cement Mortar 1:6 (One of cement and six of crushed stone sand including Mortar Plasticizer (Liquid) at 200ml per bag) using Fly ash bricks of size 230x110x70mm having the compressive strength of not less than 100 Kg/CM² for superstructure .BW-SS-CB-CM 1:6-(GF)b. In Ground Floor/Stilt floor |
| 76 | BW-SS-CB-CM 1:6-(1F)c. In First floor |
| 77 | PL-OU-CM 1:5-12mm) Plastering with CM 1:5 (One of cement and five of crushed stone sand including Mortar Plasticizer (Liquid) at 200ml per bag) 12mm thick finished with neat cement, including providing band cornice, ceiling cornice, curing, scaffolding, etc., complete in all respects and complying with relevant standard specifications. |
| 78 | DW-INT/EXT-CM-PL) Clean removal of cement plaster from walls including labour charges and hire charges for required tools and plants and Clearing the debris away from site . |
| 79 | PL-OU-CM 1:5-20mm) Plastering with CM 1:5 (One of cement and five of crushed stone sand including Mortar Plasticizer (Liquid) at 200ml per bag) 20mm thick finished with neat cement, including providing band cornice, ceiling cornice, curing, scaffolding. |
| 80 | PA-Ex-EEP-2C BPC) Painting the new walls with two coats of approved best Exterior Emulsion paint of best approved quality color and shade in addition to one coat of approved primer paint over cement plastered wall surfaces including cost of Exterior Emulsion paint, putty, brushes. |
| 81 | PA-IN-WP-2C BPC) Painting the new wood work with two coats of approved first class synthetic enamel ready mixed paint in addition to one coat of primer of approved quality and shade, the paint should be supplied by the contractor at his own cost. |
| 82 | PA-Ex-EEP-OW W P) Painting old walls two coats with Exterior emulsion paint of first class quality paint of approved colour and shade for outer wall and other similar works with priming coat through scrapping including cost of necessary brushes, labour charges, patty etc., |
| 83 | Providing termite service Post construction (TSPO) for building including charges for Drilling holes wherever necessary, injection of Chemicals to create barrier against termites with 5 years warranty . |
| 84 | Providing Chemical treatment for OHT to arrest water leakage including charges for applying water proofing material alround the walls and bottom of OHT etc., and all complete and as where required and as directed by the departmental officers. Please Enable Macros to View BoQ information |
