Tender For Construction Of New Pwd Ib At Babar Near Dadhibaman Matha Under Mahakalpada Block In The District Of Kendrapara., Kendrapara-Odisha

TDR : 54796226

Tender Notice
BOQ

11 Days Left

Kendrapara , Odisha

Tender Brief : Tender For Construction Of New Pwd Ib At Babar Near Dadhibaman Matha Under Mahakalpada Block In The District Of Kendrapara.

Document Fees
₹ 10000 /-

EMD
₹ 185700.0 /-

Tender Value
₹ 1.85 Crore /-

Submission Date
04-04-2026

Competition Type
Indian

Bidding Type
Works

Need a Business Loan? Apply Now !


1	Civil works - Clearing and grubbing roads and land including uprooting rank vegetation, grass, bushes, shrubs, saplings and trees girth up to 300 mm, removal of stumps of trees cut earlier and disposal of unserviceable materials and stacking of serviceable material to be used or auctioned, up to a lead of 1000 metres including removal and disposal of top organic soil not exceeding 150 mm in thickness.
2	Earth work in excavation in ordinary soil within 50m initial lead and 1.5m initial lift including rough dressing and breaking clods to maximum 5cm to 7cm and laying in layers not exceeding 0.3m in depth and as per the direction of the Engineer in Charge.
3	Filling the Foundation and Plinth, Sides of Foundation, etc. with excavated materials (excluding rock), in layers not exceeding 0.225 m in depth including cost of watering, ramming, dressing and levelling the top to proper level & gradient, cost of labour, conveyance, loading, unloading, T&P, etc, all complete as per the direction of Engineer-in-Charge.
4	Disposal of surplus/ excavated materials by mechanical means within 5km. Lead away from the site including cost of all labour , T&P complete as per the direction of the Engineer-in-charge.
5	Supplying, diluting and preparing chemical emulsion like Imidacloprid 30.5 % SC or other chemicals approved by Central Insecticides Board or as directed by the manufacturer and spraying the mixture uniformly by sprayer as Pre-Constructional Anti-termite Treatment confirming to IS 6313 (Part-II) and creating a chemical barrier under and around the column pits, wall trenches, basement excavation, top surface of plinth filling, junction of walls and floors along with external perimeter of the building, expansion joints, surrounding the pipes and conduits etc. at the rate of 7.5 liters per sqm on vertical surface and 5.0 liters per sqm on horizontal surfaces, 50% of the emulsion to be filled in the holes made in trenches at 150mm center to center (or as directed by the manufacturer) including the cost of all materials, cost of all labour, conveyance, loading, unloading, T&P, etc. all complete as per the direction of Engineer-in-Charge.
6	Supplying and Filling with Sand in Foundation and Plinth in layers not exceeding 20 cm in depth, well watered and compact , top surface dressed and levelled to proper level and gradient including cost of all materials , conveyance, royalties, loading, unloading, cost of all labour, T&P, etc.All compelete as per the dirrection of Engineer-in-charge.
7	Providing and lying Plain Cement Concrete of proportion (1:3:6) in foundation & floor using 40 mm & down grade black hard crusher broken granite stone metal, washed and screened sharp sand of approved quality from approved quarry including hoisting, lowering, laying the concrete, ramming, watering and curing etc. complete to required thickness including cost of all materials, conveyance, loading, unloading, royalties, cost of labours, T&P, hire & running charges of concrete mixer, etc. all complete as per the direction of the Engineer -in -charge.
8	Boring, providing and installation of 300mm dia (10 m.) single under reamed bored compaction pile foundation cast-in-situ reinforced cement concrete piles of grade M-25 of specified diameter and length below the pile cap, to carry a safe working load not less than specified, excluding the cost of steel reinforcement but including the cost of boring with bentonite solution and temporary casing of appropriate length for setting out and removal of same and the length of the pile to be embedded in the pile cap etc. by percussion drilling using Direct mud circulation (DMC) or Bailer and chisel technique by tripod and mechanical Winch Machine all complete, including removal of excavated earth with all its lifts and leads (length of pile for payment shall be measured up to bottom of pile cap). Note: Truck Mounted rotary/TMR/Tubewell boring machine shall not be used .
9	RCC WORK - Providing, lifting, hoisting and laying in position machine batched , machine mixed and machine vibrated design mix cement concrete of M-25 Including the cost of Centering and Shuttering (minimum cement content not less than 403 Kg/Cum) grade in reinforced cement concrete structural elements using black hard crusher broken granite chips of approved quality from approved quarry including mixing and compacting to proper shape and size, level and plumbs and finishing the exposed surfaces smooth including the cost of all materials, cost of labour, conveyance,loading, unloading, royalties, watering and curing for the required period, T&P , hire & running charges of concrete mixer and vibrator, cost of Admixtures in recommended proportions ( as per IS 9103 ) to accelerate, retard setting of concrete, improve workability without impairing strength and durability etc. complete as per the direction of the Engineer-in-charge but excluding the cost of steel reinforcement.In Foundation
10	R.C.C. Plinth Beam
11	R.C.C. Beams, columns, grider and bressmer etc. GF
12	First Floor
13	Terrace Floor
14	R.C.C. Floor and Roof slab, landing, balconies,Projecting sun shades and chajjas up to 4.3Mtr. Height. GF
15	First Floor
16	Terrace Floor
17	R.C.C. stairs excluding landing but including railing. GF
18	First Floor
19	R.C.C. Lintel GF
20	First Floor
21	Terrace Floor
22	Providing & fixing TOR Fe-500 HYSD Reinforcement bars of required diameter and approved quality for Reinforced Cement Concrete work including straightening, cutting, bending, binding, welding(if approved) , joining (if necessary), tying the grills, hoisting, lowering and placing in position as per the approved design & drawings (BBS) with provision of standard fan hooks including the cost of all materials, cost of all labour, conveyance, loading, unloading, cost of binding wires of 18 to 20 gauge, T&P, etc, all complete as per the direction of Engineer-in-Charge.Note: (Linear measurements will be taken & quantity will be calculated on standard weight. Lap length of bars & Weight of binding wire will not be considered for measurement and payment). GF
23	First Floor
24	Terrace Floor
25	Providing and laying Brick Masonry work in Foundation & Plinth using Fly ash bricks of 25 Cm. x 12 Cm. x 8 Cm. size having crushing strength not less than 75 Kg./Cm2 with dimensional tolerance + 2 % confirming to IS 12894 and IS 2212 in cement mortar (1:6) affter immersing the bricks for minimum 6 hours in water before use, with all necessary projections, splays cutting, circular moulding, corbelling, etc. as per the drawings including the cost of all materials, cost of all labour, conveyance, royalties, loading, unloading, scaffolding, staging, watering and curing, sundries, T&P, etc. complete as per the direction of the Engineer-in-charge.
26	Providing and laying Brick masonry work in Superstructure using Fly ash bricks of 25 Cm. x 12 Cm. x 8 Cm. size having crushing strength not less than 75 Kg./Cm2 with dimensional tolerance + 2 % confirming to IS 12894 and IS 2212 in cement mortar (1:4) for Half Brick Masonry Wall with provisions for 2 nos 6mm dia MS bar at each 4th layer after immersing the bricks for minimum 6 hours in water before use, with all necessary projections, splays cutting, circular moulding, corbelling, etc. as per the drawings including the cost of all materials, cost of all labour, conveyance, royalties, loading, unloading, scaffolding, staging, watering and curing, sundries, T&P, etc. complete as per the direction of the Engineer-in-charge. ( Excluding Cost Of Steel Reinforcement ) GF
27	First Floor
28	Providing and laying of Full Brick Masonry work in Superstructure using Fly ash bricks of 25 Cm. x 12 Cm. x 8 Cm. size having crushing strength not less than 75 Kg./Cm2 with dimensional tolerance + 2 % confirming to IS 12894 and IS 2212 in cement mortar (1:6) affter immersing the bricks for minimum 6 hours in water before use, with all necessary projections, splays cutting, circular moulding, corbelling, etc. as per the drawings including the cost of all materials, cost of all labour, conveyance, royalties, loading, unloading, scaffolding, staging, watering and curing, sundries, T&P, etc. complete as per the direction of the Engineer-in-charge. GF
29	First Floor
30	Terrace Floor
31	Providing 6 mm thick Cement Plaster in Cement Mortar of (1:4) to Ceilings of Roof Slabs, Stairs, Landings, Chajja, Shelves, Columns, Beams and Lofts etc. including roughening, scraping and cleaning and finishing the plastered surface smooth using wooden floats only to proper plumbs and level, making grooves, beads and drip coarse to give required ornamental finish as per drawings including cost of all materials, conveyance, loading and unloading and royalties, all labour, scaffolding, watering and curing , sundries, T&P etc. complete as per direction of the Engineer-in-charge. GF
32	First Floor
33	Terrace Floor
34	Providing 16mm thick Cement Plaster to the Surface of Brick Masonry Wall in Cement Mortar (1:6) including racking out joints, scraping and cleaning the surface and finishing the plaster surface smooth using wooden floats only to proper plumbs and level and making grooves, beads and drip coarse to give required ornamental finish as per drawings including cost of all materials, conveyance, loading and unloading and royalties, all labour, scaffolding, watering and curing, sundries and T&P etc. complete as per direction of the Engineer-in-charge.
35	First Floor
36	Terrace Floor
37	Providing 12mm thick cement plaster on external surfaces of brick surfaces in two coats consisting of under layer 12mm thick in CM 1:6 (1 cement : 6 coarse sand) and top layer of 6mm thick cement plaster 1:4 ( 1 cement : 4 coarse sand) mixed with integral water proofing material of including racking out joints, scraping and cleaning the surface and finishing the plaster surface smooth using wooden floats only to proper plumbs and level and making grooves, beads and drip coarse to give required ornamental finish as per drawings including cost of all materials, conveyance, loading and unloading and royalties, all labour, scaffolding, watering and curing, sundries and T&P etc. complete as per direction of the Engineer-in-charge. GF
38	First Floor
39	Terrace Floor
40	Providing, lifting, hoisting and laying in position machine batched , machine mixed and machine vibrated approved design mix Plain Cement Concrete of grade M-20 in reinforced cement concrete structural elements using black hard crusher broken granite chips of approved quality, size and grading obtained from approved quarry including mixing and compacting to proper shape and size, level and plumbs and finishing the exposed surfaces smooth including the cost of all materials, cost of all labour, conveyance, royalty, loading, unloading, watering, curing, sundries, hire & running charges of machineries, cost of admixture in recommended proportions ( as per IS 9103 ) to retard/accelerate the setting time of concrete, improve workability without imparting the strength and durability, etc. all complete as per the direction of the Engineer-in-charge.(but excluding the cost of reinforcement, centering and shuttering.)
41	Providing average 25mm thick grading Concrete in C.C (1:2:2 ) using 6mm size crusher broken black hard granite chips using 2% water proofing cement compound (Make: Sika / Fosroc / Equivalent) after scraping and cleaning the roof surface and finishing smooth to proper slope and gradient including cost of all materials, conveyance, sundries,T&P watering and curing by ponding water over terrace slab etc. complete as per the direction of the Engineer-in-charge.
42	Supplying and finishing the plastered surface of wall using Cement Based Wall Putty (Water Based) of approved make and quality and finished smooth and even surface to receive the paint including the cost of all materials, cost of all labour, conveyance, taxes, loading, unloading, scaffolding, T&P, etc, all complete as per the direction of Engineer-in-Charge. GF
43	First Floor
44	Terrace Floor
45	II. External Walls
46	First Floor
47	Terrace Floor
48	Providing and applying Two Coats Plastic Emulsion Paint of approved make, quality and shade over a coat of wall primer of approved quality to the internal plastered surfaces including throughly brushing the surface to make free from foreign materials, sand papering, priming including cost of all materials, cost of all labour, conveyance, loading, unloading, scaffolding, staging, watering and curing, T&P etc. complete as per the direction of the Engineer-in-charge.GF
49	First Floor
50	Terrace Floor
51	Providing and Painting with Two Coats Weather Coat Paint (exterior grade) of approved make & shade manufactured by reputed manufacturer make an even finished surface over a coat of water bound cement primer and wall putty in all heights with all scaffolding and staging charges including cost, conveyance, cost of all labours, T & P, sundries etc. as required for the work complete. GF
52	First Floor
53	Terrace Floor
54	Providing and painting Two Coats of Synthetic Enamel Paint of approved quality, brand and shade over a coat of red oxide primer to Iron Work including cost, conveyance, royalties , cost of all labour, labour cess, T&P etc. required for the work complete as directed by the Engineer-in-Charge. GF
55	First Floor
56	Terrace Floor
57	Providing and laying of 600 mm x 600 mm Matt Finished Vitrified Floor Tiles (colour/printed) confirming to IS : 15622 of approved make, quality and colour without any warpage laid over an under layer of 20 mm thick base of cement mortar (1:4) (1 cement: 4 coarse sand) including cutting to size, laying and filling the joints with white cement slurry mixed with colouring pigment to match the shade and colour, cleaning the surfaces with acid including the cost of all materials, cost of all labour, conveyance, royalties, loading, unloading, sundries, watering and curing, T&P, etc. complete as per the direction of the Engineer-in-Charge.GF
58	First Floor
59	Providing and laying of Vitrified Tiles in dado/skirting confirming to IS : 15622 of approved make, quality, colour and size 600mm x 600mm upto required height from floor level fixed over an under layer of 12mm thick bed of cement mortar (1:3) (1 Cement : 3 Coarse sand) including cutting to size, laying and filling the joints with white cement slurry mixed with colouring pigment to match the shade and colour, cleaning the surfaces including the cost of all materials, cost of all labour, conveyance, taxes, royalties, loading, unloading, sundries, watering and curing, T&P, etc. complete as per the direction of the Engineer-in-Charge. GF
60	First Floor
61	Providing & laying granite stone flooring in Floors and landing using (above 0.4 sqm) 20 mm thick granite stone slab of approved quality, colour and size above 0.4 Sqm as per IS 14223 laid over an under layer of 20 mm thick cement mortar (1:4) (1 cement: 4 coarse sand) confirming to IS-1443 including cutting to size, laying and filling the joints with white cement slurry mixed with colouring pigment to match the shade and colour, cleaning the surfaces with acid including the cost of all materials, cost of all labour, conveyance, royalties, loading, unloading, sundries, watering and curing, T&P, etc. complete as per the direction of the Engineer-in-Charge.
62	First Floor
63	Terrace Floor
64	Providing & laying granite stone tiles in dado/skirting using 10mm thick granite stone slab of approved quality, colour and size upto 0.4 Sqm as per IS 14223 to proper line, level and slope laid over 12mm thick cement mortar (1: 3) confirming to IS IS-1443 including cutting to size, laying and filling the joints with white cement slurry mixed with colouring pigment to match the shade and colour, cleaning the surfaces with acid including the cost of all materials, cost of all labour, conveyance, royalties, loading, unloading, sundries, watering and curing, T&P, etc. complete as per the direction of the Engineer-in-Charge. GF
65	First Floor
66	Terrace Floor
67	Supplying, fitting and fixing of 32 mm thick flush door shutter with approved quality of 30 mm thick BWR block board pasted with 1 mm thick sunmica on both side of approved design and quality including cost of all door fittings and fixtures etc. complete.
68	Supplying , fitting and fixing of two track UPVC sliding window of approved make with 6mm thick glass of approved quality complete with frame, shutters and all fitting and fixtures.
69	Supplying, fitting & fixing of GI. Grill made out of GI. flats/square bars as per drawing and design fixed in position to proper plumb, including a coat of priming with approved quality metallic primer, materials including cost, conveyance, transportation of all materials, cost of all labour, sundries, T&P etc. complete as per direction of Engineer in charge.
70	Supplying, fabricating & fixing of polished stainless steel (304 grade) items made out of pipes, angles, flats, plates, hollow tube, square pipe bracing as per approved design and specification, buffing, polishing etc. with cost, conveyance, labour in railing, parapet, staircase, space frame etc required for the work complete in all respect as per direction of Engineer-in-charge.
71	Providing & Painting with synthetic enamel paint of approved brand and manufacture to give an even shade as per the instruction of Engineer-In-Charge at all floors and all heights including all material & labour complete.
72	Loosening levelling & compacting original ground suppourting embankment to facilitate a placement of 1st layer of embankment up to a depth of 150mm mixed with water at OMC & then and then compacted by rolling as per Clause 300.20 for embankment construction as per Clause No- 305.3.4 of MoRTH specifiction.
73	Construction of granular sub-base by providing Grading-VI Material as per table 400-2, mixing in a mechanical mix plant at OMC, carriage of mixed Material to work site, spreading in uniform layers with motor grader on prepared surface and compacting with
74	Providing, laying, spreading and compacting graded stone aggregate to wet mix macadam specification including premixing the Material with water at OMC in mechanical mix plant carriage of mixed Material by tipper to site, laying in uniform layers with paver in sub- base / base course on well prepared surface and compacting with vibratory roller to achieve the desired density as per Clause 406 of MoSRT&H Specifications for Road & Bridge works.(Latest Revision)
75	Providing and laying 80 mm thick factory made cement concrete interlocking paver block of M-40 grade made by block making machine with storng vibratory compaction of approved size, design & shape, laid in required colour and pattern over and including 75mm thick sand filling.as per drawing, specification and direction of Engineer-In-charge.
76	Construction of cement concrete kerb with top and bottom width 115 and 165 mm respectively, 250 mm high in M 20 grade PCC on M-10 grade foundation 150mm thick, foundation having 50mm projection beyond kerb stone, kerb stone laid with kerb laying machine, foundation concrete laid manually, all complete as per clause 408
77	Dismantling & removing Brick / Stone Masonry in C.M./L.M. Under 3m including stacking the useful materials for reuse & removing the debris within 50m lead with cost of all labour etc. complete
78	Dismantling & Removing old tile flooring including stacking the useful materials for reuse and removing the debris within 50m lead with cost of all labour etc. complete.
79	Dismantling & Removing cement concrete including stacking the useful materials for reuse and removing the debris within 50m lead with cost of all labour etc. complete
80	Dismantling & removing RCC Columns / Beams / Slab including stacking the useful materials for reuse & removing the debris within 50m lead with cost of all labour etc. complete
81	Dismantling & Removing damaged cement plaster including stacking the useful materials for reuse and removing the debris within 50m lead with cost of all labour etc. complete.
82	Dismantling of Structures (Dismantling of existing structures like culverts, bridges, retaining walls and other structure comprising of masonry, cement concrete, wood work, steel work, including T&P and scaffolding wherever necessary, sorting the dismantled material, disposal of unserviceable material and stacking the serviceable material with all lifts and lead of 1000 metres)
83	EI works - Recessed wiring to light point/Fan point/ Exhaust fan point/Call bell point with 1.5 sq.mm FR PVC insulated single core multistrand copper conductor of ISI marked with 20 mm dia non-metallic PVC flexible conduit with 6Amp, 250V Modular switch ISI marked and ceiling rose ISI marked mounted on metal box having front Modular cover of suitable size, metal box with 1.5 sq.mm FR PVC insulated single core multistrand copper conductor as earth wire including all accessories and connection.(Make of wire-Finolex/Polycab/V-Guard)(Make of Modular Switch- Anchor Roma/ L&T/ Crabtree/Legrand) Group-A -L.P- 30
84	Group-B L.P- 54 E F P- 9
85	Group-C L.P- 30 F.P- 20
86	Supply and fixing of 6Amp plug with 6Amp switch on existing board (Anchor Roma/ L&T/ Crabtree/Legrand)
87	Wiring for twin control light point with 1.5 sq.mm FR PVC insulated single core multistrand copper conductor ofISI marked in recess PVC conduit with 2 way piano type switch with ISI marked, phenolic laminated sheet suitable size ISI marked G.I. box(18 SWG) and earthing point with 1.5 sq.mm FR PVC insulated single core multistrand copper conductor for loop earthing etc as required. ( Make of wire -Finolex / L&T / Anchor / Havels )
88	Supply and fixing of Modular metal box on surface or in recess with suitable size of Modular cover in front including providing and fixing of 6Amp and 6Amp Modular switches connection (Anchor Roma/ L&T/ Crabtree/Legrand)
89	Supply and fixing of Modular metal box on surface or in recess with suitable size of Modular cover in front including providing and fixing of 6pin 6Amp & 16Amp socket outlet and 16Amp Modular switches connection (Anchor Roma/ L&T/ Crabtree/Legrand)
90	S/F of 25 Amp modular single phase stater for AC Point
91	S/F of Multipurpose board consisting 3nos. 6Amp plug and switch and 15/16amp plug and switch Modular on metal box and Modular cover with all connections (Legrand mylinc/ Schneider clipsal/Hager insysta/Anchor Dura/ or equivalent)
92	S/F of Multipurpose board consisting 2nos. 6Amp plug and switch with all connections (Legrand mylinc/ Schneider clipsal/Hager insysta/Anchor Dura/ or equivalent)
93	Recessed wiring to submain in the following sq.mm FR PVC insulated single core multistrand copper conductor of ISI marked conforming to IS-694/1990 in the following mm dia non-metallic heavy duty flexible conduit 1.6 mm thick along with the following sq.mm FR PVC insulated single core multistrand copper conductor as earth wire as required.(Make of wire-Finolex/L&T/Anchor/Havells/V-Guard//HPL) 2 X 1.5 sq.mm +1 X 1.5 sq.mm in 20mm Dia Conduit Extra Lead
94	2 X 2.5 sq.mm +1 X 1.5 sq.mm in 20mm Dia ConduitFrom MCB to Switch Board
95	2 X 4 sq.mm +1 X 1.5 sq.mm in 20mm Dia Conduit to AC Point and Multipurpose Board
96	2 X 6 sq.mm +1 X 2.5 sq.mm in 25mm Dia Conduit to DB from Panel Board
97	4 X 10 sq.mm + 2 X 4 sq mm in 32mm Dia Conduit From Panel to TPN Power Distribution Board
98	Supply and fixing of following way three pole and neutral, sheet steel, MCB distribution 415V on surface/recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, hinged front acrylic cover for the MCB knobs detachable gland plate, interconnections, phosphatized and powder painted including earthing etc. as required (But without MCB/ RCCB/ Isolator) make-(Make-Legrand Ekinox3 ETPN/Scnider Acti 9) 4 Way(8+12) Way TPN MCB DB
99	Supply and fixing of following way single pole and neutral sheet steel MCB distribution board 250V on surface/recess complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, detachable gland plate, interconnections, phosphatized and powder painted including earthing etc. as required (but with out MCB/ RCCB/ Isolator) (make-Legrand Ekinox3 ETPN/Scnider Acti 9./L&T) 8 way DD DB
100	Supply and fixing of 5Amp to 32A rating 240 V/415 V \\"B\\" series MCB suitable for lighting and other loads of the following poles in the exiting MCB DB ISI marked complete with connections testing and commissioning etc. (Make-Legrand DX3/Scnider Acti 9/L&T) 100A FP MCB
101	40A DP MCB C Series
102	25A SP MCB C Series
103	10A SP MCB C Series
104	Supply , installation , testing and commissioning INDOOR pannel board with danger board. (Head Main Panel) 16/18 SWG pannel box 36 X 36X 12= 15552 sq. inch for single door made out of CR sheet of 16SWG and boarder angle frame to provide above pannel with proper space ,hinges, and other accessories , hinged door must be painted one coated red oxide and two coat enamel gray paint.
105	Supply and fixing of internal wiring to equipment installed in the pannel board with required size of copper multistrand single core cables duly crimped with copper lugs and all connections 36X 36 including cost of copper conductor and other fittings like gasket ,screw , nut and bolt , insulating materials etc.
106	S/F of copper bus bar 35 x 5mm with required size of insulating material and nut and bolts.
107	S/F of 125A MCCB FP 25KA MCCB (Make- L&T/Legrand/Schnider) for Incomming
108	S/F of 63A Change over(Make- L&T/Legrand/Schnider)
109	S/F of 100A FP MCB (Make- L&T/Legrand/Schnider) for Outgoing
110	S/F of 40A DP MCB (Make- L&T/Legrand/Schnider) for Outgoing
111	Supply and fixing of Indicator lamp with toggler switch and fuse
112	Earthing.Supply and fixing Earthing with copper earth plate 600 mm X 600 mm X 3.15 mm thick ISI marked including accessories and providing masonary enclosure with cover plate having locking arrangement and watering pipe etc (But without charcoal and salt) as required.
113	Salt Charcoal for used for Copper Plate earthing
114	Supplying and laying 25mm X 5mm copper strip on surface or in recess for connection etc as required.
115	2X1.5Sqmm Inverter Wiring
116	Supply & Laying of TV Cable
117	Supply of following PVC armored cables ISI marked.(Make- Glowstar/ Polycab/ Nicco/KEI/HPL/ Mescab 50Sqmm 3& 1/2 Core(With Stand By Cable for UG Provision)
118	FITTING ITEMS:Supply & Fixing of A.C Ceiling fan 48\\" size. (Make-Usha-Striker/Orient PSPO Summer cool Breeze/Havels velocity)
119	Supply and fixing of Electronics step type Modular fan regulator. (Make-Cona/ Anchor/ Usha/Bajaj)
120	Supply & Fixing of Wall mounted Fan (Make-Usha-Striker/Orient PSPO Summer cool Breeze/Havels velocity)
121	Supply of Exhaust fan 12\\" size. (Make-Orient Spring Air/ Usha Turbo LD Jet Delux/Havells Ventil Air DSP/Crompton Trans Air 12\\" )
122	Supply and Fixing of 20watt LED Tube(Havells/Phillips/Bjaj)
123	Supply and and Fixing of Slim Surface Square 18Watt LED panel Al.diecast body with with premium diffuser to ensure glare free & even distribution of light (MAKE- Phillips/ Bajaj/ Havells)
124	Supply and and Fixing of Slim Surface Square 9Watt LED panel Al.diecast body with with premium diffuser to ensure glare free & even distribution of light (MAKE- Phillips/ Bajaj/ Havells)
125	Supply & Fixing of 0.5Watt Show Light
126	Supply and Fixing of 2watt LED Spot Light (Havells/Phillips/Bjaj/ Panasonic)
127	Supply and Fixing of 90 Watt LED Street Light made up of Preessure Dia cast aluminim housing with high power LED As light source with IP66 Protection and IK07 Impact Resistant
128	AC & UPS: Supply & Installation of 5KVA (130-280V) stabilizer (Make- V-Guard/ Microtech/ Autotech)
129	Supply & Installation of 2 ton split type. (Make-Carrier, Voltas/ Blue star)
130	Supply and Installation of VA Rating 4000 VA, Max Charging Current(in Amp) 21, No. of Batteries Supported= 4N, Eco Mode Voltage Operation 140 - 280 VAC, UPS Mode Voltage Operation180 - 265 VAC, Change over time (Milli Sec) <10, Warranty36 Months (Make:- Luminous (iCruze 5000+) / Liv fast)
131	Supply and Installation of Battery 220 Ah capacity, 12V, Warranty - 48* Months Tubular Technology battery â€“ Robust Tubular plates Low antimony alloy used for low maintenance Suitable for areas with frequent and long power cuts Excellent overcharge tolerance (accepts very deep discharge-suitable for areas with long power cut) Factory charge battery in ready to use condition (Make:- Luminous /Livfast)
132	Supply & Installation of Battery MS rack with rubber mat for inverter
133	CCTV:Supply & Fixing of Network WDR 4 MP IR built in MIC Bullet/Dome Camera.Image Sensor 1/3” 4 Megapixel progressive CMOS. Number Of Pixels(H × V) 2560 x 1440. Minimum Illumination 0.005 Lux/F1.6(color,30IRE), 0 Lux with IR ON. IR Distance Up to 50m, depending on scene refl ectance. Compression H.265 / H.264 / Smart Codec / MJPEG (Sub Stream). Resolution 4M (2688 x 1520). (Make: SONY Honeywell,Hikvision, Axis, CP Plus)
134	Supply and laying of Cat6 4-pair 23AWG LSZH UTP Cable in existing conduits/trunking. Make: Tyco-AMP/ Legrand/ Digisol.
135	Supply and laying of 20mm pvc conduit in complete as per the direction of engineer incharge . Make: AKG
136	Supply & Fixing of 8 Channel NVR Make: (Honeywell/Dahua/Hikvision/CP Plus)
137	Supply & Fixing of 8 Port 10/100/1000Mbps PoE( Giga Switch . Make: Cisco/HP/Digisol
138	PoE Switch Box
139	SITC of 4U RACK Rack DIN standardConstruction : WeldedFront Door Lockable Toughened Glass DoorBasic Frame SteelEquipment 19” Mounting angles made of formed steelStandard. Powder CoatedTop and Bottom Welded to Frame, Vented and Field Cable entry exit cut outsStandard Color : Grey or BlackStatic Load : 25 kgs.(MAKE:Legrand/D-LINK /Equivalent as per direction of E.I.C.)
140	RJ 45 Connector
141	Supply & Fixing of Survaince HDD 4 TB make : Segate
142	Supply & Fixing of 25mm C Clips
143	1000VA UPS (Make- Microtek)
144	HDMI Extender 120 Mtr
145	HP Wireless Mouse
146	Supply and fixing of 32\\" IPS 4k Ultra HD Display with 440 NITS, 1200:1 Contrast Ratio, android professional display in complete as per the direction of engineer incharge. Make: Sony ,Samsung,LG
147	S/F of 100watt LED Flood Light New generation energy saving &environmental friendly long life versatile pressure die-cast aluminium IP66 roadway luminaire with high power LEDs as light source and electronic drive including G.I bracket,M.S clamp,Anchor fastner with all accessories and connection(Make;Halonix/Havells/Crompton/Suriya/Bajaj or eq model)
148	Supply of 8mtr long Galvanised Octagonal pole having 3.1mm thick, 70mm of top outer dia and 130mm bottom outer dia with decorative single arm of 40mm dia, inbuilt junction box arrangement with base plate of 220X220X12 mm thick and foundation bolt with Anchor plate complete with nut bolt with PU Coating (Make-Bajaj)
149	Supply of four arms G.I Structure
150	Supply of junction box with 6Amp DP MCB incomer incoming2.5sq.mm three core copper flexible cable
151	Providing and fixing of spike earthing for poles
152	Construction of Foundation with M20 grade cocrete for the mini Highmast considering the safe soil bearing capacity at site as 10 T/sqmm at 1.5mtr Depth and with all materials and labour. Depth and concrete base is (2×2) ft with all material and labour
153	S/F of Earthing with medium class 40mm 3mtr long ISI marked GI Earth pipe including accessories such as funnel GI Nut, Bolt, washer
154	Supply of 10sq mm 4 core Armoured Alluminium cable for Semi high mast light post
155	Supply of 2.5sq mm 3 core flexible copper cable
156	Laying of one number of PVC insulated and PVC sheathed /XLPE power cable of 1.1KV grade of size not exceeding 25sq.mm direct in ground including excavation , sand cushing, protective covering and refilling the trench etc. as required
157	PH works - Supplying all materials, labour, T&P and providing and fixing to wall or ceiling and floor CPVC pipes conforming to IS:15778 having thermal stability for hot and cold water supply, including all CPVC plain and brass threaded fittings including fixing the pipe with clamps at 1.00. spacing. This includes Jointing of pipes & fittings with one step CPVC solvent cement and testing of Joints all complete as per specification and direction of the Engineer in charge(Supreme/Ashirvad/Oriplast/Shaakya).20mm dia CPVC pipe In GROUND Floor
158	In First Floor
159	25mm dia C-PVC pipe In ground floor
160	In First Floor
161	Supplying all materials, labour, T&P and providing and fixing to wall or ceiling and floor pvc pipes conforming to ASTM-D-1785/89 (Sch-80) and pipe fittings of the following nominal bore with clamps including making good the wall, ceiling and floor all complete as per specification and direction of the Engineer in charge(Supreme/Ashirvad/Oriplast/Shaakya).In ground floor 25mm dia PVC ASTM pipe (sch-80)
162	In First Floor
163	In 2nd floor
164	32mm dia In ground floor
165	In First Floor
166	In 2nd floor
167	50 mm dia PVC ASTM pipe (sch-80)2nd floor
168	Supplying all materials, labour, T&P and cutting holes through existing brick work including making good the damages in cement mortar (1:4) for taking GI pipes and fittings/ PVC pipes and fittings etc all complete as per PH specification and direction of the Engineer in charge.ground floor 250mm thick wall
169	In First Floor
170	Supplying all materials, labour, T&P and cutting hole in R.C.C floors, roofs, etc upto 19 cm thick for passing GI pipes / PVC pipes and fittings etc and repairing the holes after insertion of pipes etc with cement concrete (1:2:4) including finishing complete so as to make it leak proof as per direction of the Engineer in charge
171	Supplying all materials, labour, T&P and cutting grooves in pucca floors and walls for taking GI/ PVC pipes and making good the damages as per the direction of the Engineer in charge.In ground floor
172	In First Floor
173	Supplying all materials, labour, T&P and fitting and fixing brass/CP fittings of the following nominal bore with supply of all jointing materials complete as per specification and direction of the Engineer in charge. 15mm dia CP two way bib cock(FUS-ABR-29041)
174	15mm dia CP hand shower with reebit cleaning system (ABC chrome plated-Jaquar make-HSH-CHR-85537)
175	15 mm dia CP L.B. Bib cock(FUS-ABR-29037)
176	15mm dia CP angle stop cock(FUS-CHR-29053)
177	15mm dia CP 3 in 1 Wall Mixture with Telephonic Shower (FUS -CHR-29281 )
178	20mm dia CP concealed stop cock(CON-CHR-083KN Jaquar ) Make
179	15mm dia C.P. Pillar Cock with Extension Body (FUS-CHR-29021N)
180	Urinal Valve Auto Closing System with Built-in Control Cock & Wall Flange Cat no PRS CHR-077 of Jaquar
181	15mm dia C.P. bottle trap ALD-CHR-769L300X190 Jaquar make
182	15mm dia Over Head Shower 100mm dia round (OHS-CHR-1999)
183	Shower Arm (SHA-ABR-479L300S)
184	600mm X 125mm C.P glass shelf (ACN -CHR-1171N)
185	Towel Rack 600mm long with Lower Hangers, Stainless Steel AKP CHR-35781PS of jaquar
186	C.P towel Rail (ACN-CHR-1111BNMMI)
187	C.P towel ring(ACN-CHR-1121NM)
188	CP Soap dish Holder (ACN-CHR-1131N)
189	Soap dispensing with glass bottle(ACN-CHR-1137N)
190	Toilet Paper holder(ACN-CHR-1151N)
191	25mm dia CPVC full way valve
192	32mm dia CPVC full way valve
193	50mm dia CPVC full way Valve
194	15mm dia CP flange
195	15mm dia CP extension piece
196	Supplying all materials,labour,T&P and fixing Rotational moulded polyethylene cylindrical vertical water storage tanks conforming to IS : 12701--1996 including cutting holes through the tank and fixing mild steel tubes and fittings and providing extra sockets and jam nuts, fixing ball valve etc, including hoisting upto a height of 5 metres above ground level and placing the tank to the required position and providing 1st class K.B brickwork in cement mortar (1:6) of 0.46m height in staging and in circular protection wall to support the tank, 12mm thick cement plaster (1:6) over brickwork, R.C.C slab of size 1.60mx1.60m and 0.10m thick, R.C.C beam of 0.25mx0.30m and 2.60m average length in cement concrete(1:2:4) using 12mm size h.g chips including centering and shuttering, watering, curing, conveyance of all materials to worksite etc all complete as per specification and direction of the Engineer in charge On the roof of First floor 2000litre capacity water storage tanks
197	Supplying all materials, labour, T&P and fitting and fixing U-PVC SWR soil waste ventilating pipes and fittings of the following outside diameter conforming to ISI No. 13592/1992 to walls with nails, bobbins and wooden plugs or laying in trenches including jointing with supply of approved rubber lubricant by non-heat application method/as per manufacturer’s specification, testing, earthwork in excavation in all kinds of soil and refilling of trenches as per specification and direction of the Engineer in charge In (Supreme/Ashirvad/Oriplast/Shaakya) 110mm dia U-PVC SWR pipe
198	110mm U-PVC door tee
199	110mm U-PVC door bend
200	110mm U-PVC plain bend
201	110mm U-PVC Plain tee
202	110mm dia U-PVC 'P' trap
203	110mm dia U-PVC Plain Shoe Bend
204	110mm dia U-PVC offset with out ear
205	110mm dia U-PVC cowl
206	125mm dia CP grating
207	110mm dia PVC SWR Clamp/ clip
208	50mm dia UPVC Pipe Class IV
209	Supplying all materials, labour, T&P and cutting holes through existing brick or laterite masonry wall for taking HCI pipes and fittings including making good the damages etc all complete as per PH specification and direction of the Engineer in charge 250mm to 375mm thick wall
210	Supplying all materials, labour, T&P and fixing the following vitreous china Wash Down Water Closet (European type W.C pan) with integral ‘P’or ‘S’ trap to the floor with wooden plug and chromium plated pedestal screws including jointing the trap with soil pipe in cement mortar (1:1), fixing plastic seat and cover for wash down water closet with chromium plated brass hinges and rubber buffers including polishing etc all complete as per specification and direction of the Engineer in charge. European water closet with ‘S’ trap plainJAQUAR/HINDWARE/CERA .SLS-WHT-6851S300UFSingle Piece-WC with UF soft closeseat cover, Hinges, Fixing Accessories,Accessories Set and Cistern fittings,Size: 360x725x735 mm, S Trap-300 mm
211	Supplying all materials, labour, T&P and fixing bowl pattern urinal conforming to IS:771-part-3-1985 of the following sizes including connecting the urinal with 32mm dia pvc waste pipe 910mm long by means of white lead mixed with chopped hemp, fixing 32mm dia CP dome waste, 15mm dia CP spreader including cutting holes in walls and making good the damages with supply of wooden plugs, screws and cement etc all complete as per specification and direction of the Engineer in charge. Stall urinal (Parryware / Hindware make )
212	15mm dia urinal spreader
213	32mm dia C.P. dome waste
214	Supplying all materials, labour, T&P and fixing wash kitchen sink/laboratory sink with outlet at end and weir overflow including fitting and fixing a pair of cast iron or MS brackets painted white, fixing 50mm/40mm dia CP brass waste, fixing 50mm/40mm dia PVC waste pipe 910mm long with supply of wooden plugs, screws and cement etc including cutting holes in walls and making good the damages etc all complete as per specification and direction of the Engineer in charge . 600x450x250 mm stainless Steel kitchen sink-glossy-IS: 13983-1994
215	Supplying all materials, labour, T&P and fixing wash basins with hole for pillar taps with cast iron or M S brackets painted white including cutting holes in walls and making good the damages with supply of wooden plugs, screws and cement etc, fixing pedestal for wash basin recessed at the back for the reception of pipes and fittings, fixing PVC waste pipe of 32mm nominal diameter for wash basin including brass check nut complete, fixing pillar taps capstan head screw down high pressure lettered ‘Hot’ and ‘Cold’ with long screws, shanks and back nuts of 15mm dia nominal bore, fixing 15mm dia PVC inlet connection pipe and making connection with pillar cocks and supply mains for wash basin, fixing 32mm dia CP brass waste, etc all complete as per specification and direction of the Engineer in charge. 550mmx400mm size wash hand basin with half Pedestall(Make:JAQUAR/HINDWARE/CERA ) Half pedestal basin FNS-WHT-40801 Wall Hung Basin with Fixing Accessories Size: 620x480x185 mm & FNS-WHT-40305Half pedestal with Fixing Accessoriesfor 40801 )
216	Supplying all materials, labour, T&P and fixing mirror of superior glass mounted minimum 5mm thickon 6mm thick A.C sheet or plywood sheet and fixed to wooden plugs with CP screws and washers complete as per specification an direction of the Engineer in charge . 600mmx450mm size B.E mirror x minimum 5mm thick(Alpina make ) Design Mirror
217	Supplying all materials labour T&P and filling in foundation and plinth with sandwell watered and rammed including conveyance of all materials to work sitepayment of royalty taxes etc all complete as per direction of Engineer in charge In ground floor
218	Supplying all materials, labour, T&P and providing cement concrete (1:4:8) with 4cm size hard granite metal including watering, curing, conveyance of all materials to worksite, payment of royalty, taxes etc all complete as per specification and direction of the Engineer in charge. In ground floor
219	Supplying all materials, labour, T&P and providing cement concrete (1:2:4) with 12mm size hard broken granite chips including watering, curing, conveyance of all materials to worksite, payment of royalty, taxes etc all complete as per specification and direction of the Engineer in charge. In ground floor
220	In First Floor
221	Supplying all materials, labour, T&P and providing 12mm thick cement plaster (1:4) on brickwork including watering, curing, conveyance of all materials to worksite, payment of royalty, taxes etc all complete as per specification and direction of the Engineer in charge In ground floor
222	In First Floor
223	Supplying all materials, labour, T&P and providing 12mm thick cement plaster (1:4) on brickwork with Cement Punning including watering, curing, conveyance of all materials to worksite, payment of royalty, taxes etc all complete as per specification and direction of the Engineer in charge In First Floor
224	Supply of all materials & laying the waterproofing material of Dr.Fixit torch shield P3160(3mm)with its primer 2 coats or equivalent water proofing material after drying cleaning the concrete surface over the concrete floor/roof/ balcony/sunken and dado upto 1\\"6\\" in wall including cleaning,applying and mending as per specification including cost, conveyance, taxes, royalities of all materials to work site etc.all complete as per the direction of the Engineer-in-charge. In First Floor
225	Supplying all materials, labour, T&P and filling in sunken floor in toilets with cinter (light weight slag) well watered and rammed include conveyance of all materials to worksite payment of royalty, taxes etc all complete as per specification and direction of the Engineer in charge. In First Floor
226	Supplying all materials, labour, T&P and providing ceramic tiles in floors, treads and landing on 25mm thick bed of cement mortar 1:1 (1 cement:1 sand) joined with neat cement slurry mixed with pigment to match the shades of the tiles including rubbing and polishing complete as per direction of the Engineer in charge. 60 cm. x 60 cm. Kajaria / Somany / Johnson to be pree approved .In ground floor
227	In First Floor
228	Supplying all materials, labour, T&P and fixing porcelain glazed tiles in dados skirting on 12mm thick cement plaster (1:3) jointed with neat cement slurry mixed with pigments to match the shades of the tiles including rubbing and polishing complete as per direction of the Engineer in charge.60cm. x 30cm. Kajaria / Somany / Johnson to be pree approved
229	In First Floor
230	Factory made single leaf Solid WPC (Wood polymer) composite door shutter of 25mm thickcompacted with wood grain finish structural foam panel of 29mm thickness and a density of 20kg/cu.mtr shall be used as core material for fitting the metal fittings such as tower bolts, aldrops, handles etc shall be provided. A structural adhesive compatible with (EPS) foam shall be used for bending the core material, The material and process for manufacturing the door shutters shall conform to RV-TIFAC composites Design Centre's standards and specifications and the door shutters Conforming to relevant I.S.specification. The finish of door shutter will be plain colour white/ Ivory/ Beige/ Light grey/ Mahogany/ Teak wood or any other colour using high quality pigments. Three heavy whight mild steel butt hinges type-I(ISI marked) size 100mm are to be fitted on one side of shutter.
231	Factory made Solid WPC door frame of size 95mmx55mm fabricated .The door frame consist of four segments which are provided with plug-in-socket arrangement in-situ in the mould. The segments are plugged in and are joined together by means of screw. The WPC frame shall be provided with The material and process for manufacturing the door frames shall conform to Relavent I.S.specification. The finish of door frame will be plain colour white/ Ivory/ Beige/ Light grey/ Golden brown/Mahogany/ Teak wood/sand stone/Champagne/Pastel blue or any other colour using high quality pigments complete in all respect as per specification and direction of the Engineer in charge
232	EXTERNAL P.H. WORK Supplying all materials, labour, T&P and laying in trenches (to level or slope) unplasticized PVC pipes conforming to IS: 4985/2000 of the following outside dia for class–3(0.60mpa) including jointing with supply of approved solvent cement by non-heat application method/as per manufacturer’s specification, providing and laying in trench cement concrete (1:4:8) with 40mm size hard granite metal in the Type C-1 standard bedding surrounding or encasing including concrete for bedding and curing etc all complete as per PH specification and direction of the Engineer in charge. 110mm dia
233	160mm dia
234	Supplying all materials, labour, T&P and constructing gully trap chamber of the following inside size with 8cm thick R.C.C precast cover slab in cement concrete (1:2:4) mix using 12mm size h.g chips, foundation concrete (1:4:8) using 40mm size hard granite metal on bed and around trap, KB brickwork in cement mortar (1:6) in F&P and inside 12mm thick cement plastering (1:3) finished with a floating coat of neat cement including fixing 100mmx100mm size HCI gully trap,150mmx150mm size CI grating etc all complete as per approved drawing, specification and direction of the Engineer in charge.Inside size 250mmx250mm
235	Supplying all materials, labour, T&P and constructing inspection chamber of the following size with cement concrete(1:3:6) using 40mm size hard granite metal on bed, 1st class fly ash brickwork in cement mortar(1:6), moulding and shaping the channel inside and benching with cement concrete (1:2:4) using 12mm size h.g chips, 12mmthick cement plaster (1:3) with punning to inside, cement flush pointing (1:3) to outside, RCC cover slab in (1:1.5:3) using 12mm size h.g chips with RCPC man hole cover, earthwork in excavation in all kinds of soil and refilling the cavity around the chamber including watering, curing, conveyance of all materials to worksite, payment of royalty, taxes etc all complete as per approved specification and direction of the Engineer in charge. Inside size 760mmx760mmx460mm
236	---- do --- addl depth of 0.15m upto 0.90m
237	R.C.P.C.Manhole Cover
238	Supplying all materials, labour, T&P and constructing soakway pit of the following size with dry brick walling from bottom upto invert of inlet pipe and fly ash brickwork in cement mortar (1:6) for the remaining height at top, cement concrete (1:4:8) using 40mm size hg chips on bed, 12mm thick cement plaster (1:4) inside and outside over masonry brickwork, gravel backing in the rear of well steining, RCC cover slab in cement concrete (1:2:4) using 12mm size hg chips fitted with iron lifting handles including earthwork in open well excavation in all kinds of soil and refilling of cavity around the pit & painting the iron works, watering, curing, conveyance of all materials to worksite, payment of royalty, taxes etc all complete as per approved specification and direction of the Engineer in charge 1.40m dia x 2.00m deep soakway pit
239	Construction of 30 users RCC Septic tank( 2 nos)Earth work in excavation of foundation in all kinds of soil within 50m initial lead and 1.5m initial lift including rough dressing & breaking clods to maximum 5cm to 7cm and laying in layers not exceeding 0.30m in depth and as per direction of the Engineer-in-Charge.
240	Extra lifts of 1.50 mtr or part thereof over the initial lift of 1.5 mtr in all kinds of embankments and road works and ordinary earthwork in general.
241	Supplying all materials, labour, T&P and providing cement concrete (1:3:6) with 4cm size hard granite metal including watering, curing, conveyance of all materials to worksite, payment of royalty, taxes etc all complete as per specification and direction of the Engineer in charge.In ground floor
242	Supplying all materials, labour, T&P and providing shoring and shuttering for foundation trenches, pits etc with close wooden planks or sheets shuttering etc all complete as per specification and direction of the Engineer in charge
243	Supplying all materials, labour, T&P and providing rigid and smooth centering and shuttering for R.C.C works including false work and dismantling them after casting including conveyance of all materials to worksite, payment of royalty, taxes etc all complete as per specification and direction of the Engineer in charge
244	RCC beam,Column, girders and bressmer etc
245	Supplying all materials, labour, T&P and providing M.S reinforcement for R.C.C work including cutting, bending, binding, and tying the grills and placing in position including cost of binding wire 18 to 20 gauge, conveyance of all materials to worksite, payment of royalty, taxes etc all complete as per specification and direction of the Engineer in charge In ground floor
246	Supplying all materials, labour,T&P and providing cement concrete(1:1 ½:3) with 12mm size hard broken granite chips for R.C.C works including hoisting, laying, watering, curing, conveyance of all materials to worksite, payment of royalty, taxes etc all complete as per specification and direction of the Engineer in charge In ground floor
247	Supplying all materials, labour, T&P and providing 12mm thick cement plaster (1:3) on brickwork including watering, curing, conveyance of all materials to worksite, payment of royalty, taxes etc all complete as per specification and direction of the Engineer in charge In ground floor (inside/outside)
248	Supplying all materials, labour, T&P and providing cement punning including watering, curing, conveyance of all materials to worksite, payment of royalty, taxes etc all complete as per specification and direction of the Engineer in charge In ground floor (inside/outside)
249	Supplying all materials, labour, T&P and making MS step iron in 20mm diameter MS steel bars and fixing into walls of man hole/septic tank duly embedded in cement concrete (1:3:6) complete as per specification and direction of the Engineer in charge.
250	Supplying all materials, labour,T&P and providing Vent base in cement concrete(1:2:4) with 12mm size hard broken granite chips for R.C.C works including hoisting, laying, watering, curing, conveyance of all materials to worksite, payment of royalty, taxes etc all complete as per specification and direction of the Engineer in charge
251	Supplying all materials, labour, T&P and fitting and fixing HCI soil waste ventilating pipes and fittings to walls with nails, bobbins and wooden plugs or laying in trenches including earthwork in excavation in all kinds of soil and refilling of trenches as per specification and direction of the engineer in charge 110mm diameterU PVC SWR pipe(Oriplast make )
252	110mm dia U-PVC H.R. bend
253	110mm dia U-PVC Cowl
254	Filling in foundation and plinth with excavated materials, moorum including watering and ramming as directed by the Engineer in charge
255	Sinking of 125mm x 50mm dia tubewell through hand boring (water jet ) method .Supplying all materials, labour, T&P and setting up boring equipments including erection of suitable staging for installation of the required size of tube well, dismantling and removing the same after complection of the work, including transportation of the boring equipments, cleaning and levelling the site, excavation of mud pit, channels etc, levelling of site all complete as per direction of Engineer in charge
256	Supplying all labour, T&P and transporting the boring pipes, top casing , grouting pipes, P.V.C pipes and fittings, P.V.C well screens, cement, bentonite and gravels etc to the worksite including loading and unloading etc all complete as per direction of Engineer in charge
257	Supplying all labour, T&P and drilling pilot bore not less than 102mm dia, without casing pipes in all kinds of soils and rocks for the following depths excluding supply of necessary boring pipes including supply of necessary cutting equipments, extra sockets (whenever required) etc and withdrawing the boring pipes, washing and keeping the bore clear for logging if required all complete as per direction of Engineer in charge. Drilling pilot bore from 0 to 360 metres
258	Supplying all labour, T&P and reaming the pilot bore to the following sizes and depths without casing pipes including withdrawing the boring pipes, washing the bore by means of pipe cylinder etc all complete as per direction of Engineer in charge Reaming 100mm to 150mm dia from 0 to 360 metres
259	Supplying all labour, T&P and jointing materials and lowering the 300mm dia top casing pipes into the position and removing the same after use all complete as per direction of Engineer in charge from 0 to 360 metres
260	Supplying all labour T&P and grouting with cement slurry for saline sealing in the bore around the 150 mm dia PVC casing pipe etc all complete as per the direction of the Engineer in charge.
261	Supplying all labour, T&P and jointing materials and lowering the pvc casing pipes, fittings and well screens in position, including fitting and fixing of centraliser, cutter plug and washing the bore all complete as per direction of Engineer in charge 125mm dia PVC casing pipe from 0 to 360 metres
262	Cost of 125mm dia PVC ASTM pipe (sch-80)
263	50mm dia PVC casing pipe from 0 to 360 metres
264	Cost of 50mm dia PVC ASTM pipe (sch-80)
265	Cost of 50mm dia PVC well screen
266	Cost of 50 mm dia C.I. cutter plug
267	Cost of bentonite powder
268	Supplying all materials, labour, T&P and packing the bore with washed gravel of river shingles of required size and specification around the well screen and pipe etc all complete as per the direction of the Engineer in charge
269	Cost and Conveyance of Gravel
270	Supplying all materials, labour, T&P and packing the bore with river sand over the gravel pack etc all complete as per the direction of the Engineer in charge
271	Cost and Conveyance of sand
272	Supplying all labour T&P and grouting with cement slurry for sanitary sealingin the bore around the upper most 3 metres of 150mm dia PVC casing pipe etc all complete as per the direction of the Engineer in charge.
273	Cost of Cement
274	Cleaning and developing the tube well with supply of compressor worked till clear and adequate discharge is obtained from the tube well including supply and use of all necessary equipment and labour as per direction of the Engineer in charge By Compressor
275	Supplying all materials, labour, T&P and constructing Bore well protection chamber of the inside size 650x650x1000hight with cement concrete (1:3:6) using 40mm size hard granite metal on foundation, 1st class Fly ash brickwork in cement mortar (1:3), with base cement concrete (1:2:4) using 12mm size h.g chips,12mmthick cement plaster (1:4) inside and outside, R.C.C cover slab in (1:1.5:3) using 12mm size h.g chips, earthwork in excavation in all kinds of soil and refilling the cavity around the chamber including watering, curing, conveyance of all materials to worksite, payment of royalty, taxes etc all complete as per approved specification and direction of the Engineer in charge.
276	Supplying all materials, labour, T&P and providing, fitting and fixing submersible pump with squirrel cage induction type submerisble electric motor to run on 3 phase/1 phase line voltage ranging from 320 volt to 450 volt conforming to IS: 8034/89 with following specifications with suitable control panel, jointing with GI/PVC/HDPE pipes, electrification, testing, commissioning, trail running, conveyance of all materials to worksite, payment of taxes etc all complete as per specification and direction of the Engineer in charge1.00H.P single phase submersible pump set (KP4-03215 pumpset CP)Kirloskar/Crompton/CRRI make
277	DOL Control panel
278	40mm dia steel short piece
279	Well cap
280	50mm size CI bracket
281	2.50 sqmm flat cable
282	Steel rope with cover
283	20mm dia rigid UPVC pipes
284	32mm dia HDPE Pipe
285	Labour charges for lowering including transportation
286	Supplying all materials, labour, T&P and providing & electrification to submerssible pump sets and service connection including fitting fixing of electric board & Switch etc all complete as per direction of the Engineer in charge. Please Enable Macros to View BoQ information

Tender Documents

SR No	FileName	File Description
1	Click here to download tender document	Tender Documents
2	Click here to download tender document	Tender Documents
3	Click here to download tender document	Tender Documents
4	Click here to download tender document	Tender Documents
5	Click here to download tender document	Tender Documents

Also Visit

Tenders

Odisha Tenders

Construction Tenders

Building Construction Tenders

Building Work Tenders

Disclaimer

We takes all possible care for accurate & authentic tender information, however Users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender.

Top

Tender For Construction Of New Pwd Ib At Babar Near Dadhibaman Matha Under Mahakalpada Block In The District Of Kendrapara., Kendrapara-Odisha

Tender Documents

Disclaimer

About Us

Services

Browse Tenders

For Sales Inquiry

Tender For Construction Of New Pwd Ib At Babar Near Dadhibaman Matha Under Mahakalpada Block In The District Of Kendrapara., Kendrapara-Odisha

Tender Documents

Disclaimer

OTP Verification

About Us

Services

Browse Tenders

For Sales Inquiry

Connect With Us