|
| 1 | Cleaning of site for workable position all complete. (NS) |
| 2 | Excavation in foundation in ordinary Soil (Loam, Cley or sand) including, lift up to 1.50 M and lead up to 30 M and including filling watering and ramming of excavated earth into the trenches or into the space between the building and the sides of foundation trenches or into the plinth and removal and disposal of surplus earth as directed by the Engineer-in-charge up to a distance of 30 M form the foundation trenches. Including royalty. (SI No. 251) |
| 3 | Providing and laying cement concrete in 1:5:10 (1 cement : 5 coarse sand : 10 graded stone aggregate 40 mm nominal size) and curing complete, including cost of form work in foundation and floors. (DSR SN-4.1.10) |
| 4 | P/L GSB with graded stone ballast with stone grit size stone ballast with hand ramming watering including all material labor T&P etc.all complete (NS) |
| 5 | Supply & fixing of pre-cast M-30 cement concrete RUBBER MOLD INTERLOCKING TILES over 40mm thick local sand bed, with 3mm thick joints filled with local sand including leveling, tempering and sweeping etc., interlocking bricks will be as description given in direction issued by the IRCSC-03-2004 and should be ISI marked all complete. (N.S.) 80mm thick, Strength should not less than M-30 (NS) |
| 6 | Anti-Termite Treatment of the top surface if filled earth at the rate of 5 litres of emulsion per square metre of surface |
| 7 | R.C.C. work Providing and laying in position specified grade of reinforced cement concrete including the cost of centering, shuttering, finishing and excluding reinforcement. All work up to plinth level : 1:1½:3 (1 cement : 1½ coarse sand : 3 graded stone aggregate 20 mm nominal size) (S.I. No. 5.1.2) |
| 8 | Class-150 (Non Modular) brick work in 1:6 cement and Coarse sand mortar in foundation and plinth including supply of all material, labor T&P etc. required for proper completion of work. (S.No. 6.1.2) |
| 9 | Renforced cement concrete work in walls (any thickness), including attachedplasters, buttresses, plinth and string courses, fillets, columns, pillars, piers, abutments, posts and struls etc. including cost of centering, shuttering, and excluding Reinforceement 1:1½:3 (1 cement : 1½ coarse sand : 3 graded stone aggregate 20 mm nominal size) (S.I. No. 5.2.2) ii) |
| 10 | Class-150 (Non Modular) brick work in 1:6 cement and Coarse sand mortar in Superstructure including supply of all material, labor T&P etc. required for proper completion of work. (S.No. 6.1.2) |
| 11 | R.C.C. work Providing and laying in position specified grade of renforced cement concrete Slab including the cost of centering, shuttering, finishing and excluding reinforcement. Above plinth level up to fifth floor lable: 1:1½:3 (1 cement : 1½ coarse sand : 3 graded stone aggregate 20 mm nominal size) (S.I. No. 5.1.2) |
| 12 | Mild Steel or iron in plain work such as reinforced concrete or reinforced brick work (When not included in and an overall rates) brought to required shape as necessary including bending for proper completion of the work and including supply of steel, its wastage bend hooks and authorized over lapping shall be measured up to floor two level. (10 mm to 12mm tor (TMT Bars). |
| 13 | 100 mm thick (average) mud phuska of damped brick earth on roof laid to slope consolidated and plastered with 25 mm thick mud mortar mixed with bhuska 10 kg per cum of earth and gobri leaping with 1:1 (Clay and cowdung) and covered with cement mortar 1:3 (1 cement : 3 time sand) and finished neat including cost of bricks tiles. (NBO No. 15.59) |
| 14 | Supply & Fixing of fan box with labour T&P etc. all complet |
| 15 | Providing and fixing PVC pipe conforming to working pressure 6 kg/sqCm including testing laboure T&P and all complete fittings 90 mm diameter |
| 16 | Mild Steel or iron in Heavy Size such as reinforced concrete or reinforced brick work (When not included in and an overall rates) brought to required shape as necessary including bending for proper completion of the work and including supply of steel, its wastage bend hooks and authorized over lapping shall be measured up to floor two level. (10 mm to 12mm tor (TMT Bars). |
| 17 | Supply & fixing of flush doors, commercial quality conforming of I.S. 2202 part 1 (1983) including fixing of wooden cleats and stoppers and including fixing and adjustment of hinges, bolts, locks, handles, springs, fitting with necessary screws to be supplies deparmentally. (a) 32mm thick. {Chapter No.09 S.I.No. 470(a)} |
| 18 | Supply and Fixing Oxided Iron Fitting etc. all complete (None Scheduled) |
| 19 | Providing and fixing bright finished brass 100 mm mortice latch and lock, ISI marked, with Six levers and a pair of anodised (anodic coating not less than grade AC 10 as per IS : 1868) aluminium lever handles of approved quality with necessary screws etc.complete. |
| 20 | Supply & Fixing of bright frunished lath and lock |
| 21 | Providing and fixing aluminium hanging floor door stopper, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868), transparent or dyed to required colour and shade, with necessary screws bolts, nut and washers etc. complete. -Single rubber stopper |
| 22 | Providing and fixing stainless (SS 304 grade) adjustable friction windows stays of approved quality with necessary stainless steel screws etc. to the side hung windows as per direction of E/IC complete. - 205x19 mm |
| 23 | 12MM cement plaster with cement motar in proportion 1:4 cement & coarse sand of single coat for interior plastering up to floor two level including internal rounded angles chamfers and rounded angles not exceeding 80mm in girth and finished even and smooth. |
| 24 | Finishing walls putty approved brand and manufacture and of required shade and undecorated wall surface to give and even shade over and including curing and cost of all materials. (New Item) |
| 25 | Finishing walls with water proofing cement paint of required shade : New work (Two or more coats applied @ 3.84 kg/10 sqm) supply of all labour material and T&P requird for proper complete of work |
| 26 | Paint of the two coat over priming ocat including cost of priming coat new wood/steel gril etc. ………… all complete |
| 27 | Kota Stone slab flooring over 20mm (average) thick base, laid and jointed with grey cement slurry,mixed with pigment to match the shade of the slab, including rubbing and polishing complete with base of cement mortar 1:4 (1 Cement : 4 Coarse Sand),25mm thick |
| 28 | Providing and laying ceramic non skid floor tlles of size 300X300 mm (thickness to be specified by the manufacture) of 1st quality conforming to IS:15622 of approved make in colour such as white, lvory, Grey, Fume Red Brown, laid on 20 mm thick cement mortar 1:4 (1 Cement : 4 Coarse Sand), Jointing with grey cement slurry @ 3.3 kg/sqm including pointing the joints with white cement and matching plgment etc.complete. |
| 29 | Supply and hosting of syntax or equivalent high density polythene seamless of piece molded tanks and placing the same in proper position including all taxes, labor and T&P etc. for proper completion of work. Tank should be ISI marked syntax or equivalent for 200 liters. (NN Approved) |
| 30 | Supply and Fixing of Light Fitting Switch Board. (None Sheduled) |
| 31 | Supply and Fixing Wiring of Light Point. (None Sheduled) |
| 32 | Supply & Fixing of wiring Sub Main. |
| 33 | Supply & Fixing of Plug Power Point 15mm. |
| 34 | S/F of 27 watt C.F.L. etc. ……. All complete |
| 35 | Providing of other electrical work etc. |
| 36 | Providing & fixing stainless steel (Grade 304) raiding made of hollow tubes channels plates etc. including welding grinding, buffering polishing and making curvature (wherever required) and fitting the same with necessary stainless steel nuts and bolt complete, i/c fixing the railing with necessary accessories and stainless steel dash fasteners stainless steel bolts etc, of required size on the top of the floor or the side of slab with suitable arrangement as per approval of Engineer in-charge, (of pavement purpose only weight of stainless steel members shall be considered excluding fixing accessories such as nuts, bolts, fasteners etc.). |
| 37 | Supply & Fixing Granite Board 2.5\\"x4\\" Size Display Board including Painting, Lettering etc. all complete. (None Schedule) |
| 38 | Supply & Fixing of fan box with labour T&P etc. all complet |
| 39 | Sub Total (A) |
| 40 | Add/Deduction Rs. For Estimate Figure Amount Match |
| 41 | Grand Total Please Enable Macros to View BoQ information |
