|
| 1 | Item No.1: Dismantling the R.C.C. Work 1:2:4 and sorting out the materials such as steel etc. as directed and stacking them within the specified lead as directed etc. complete. Addn.Spec.No.As directed by Engineer in charge. (SSR 22-23 It.No.46.29) |
| 2 | Item No.2:-Excavation for foundation in earth, soil of all types, sand, gravel and soft murum, including removing the excavated material up to a distance of 50 m. beyond the building area and stacking and spreading as directed, dewatering, preparing the bed for the foundation and necessary back filling, ramming, watering including shoring and strutting etc. complete. (Lift upto 1.5 m.) By Mechanical Means Addn.Spec.No.Bd.A.1 Page One Number 259 (SSR 22-23 It.No.21.02 ) |
| 3 | Item No.3:-Excavation for foundation in hard murum including removing the excavated material upto distance of 50 metres beyond the building area and stacking and spreading as directed, dewatering, preparing the bed for the foundation and necessary back filling, ramming, watering including shoring and strutting etc. complete. (Lift upto1.50 m) By Mechanical Means Addn.Spec.No. Bd.A.2 Page One Number 259 (SSR 22-23 It.No.21.06 ) |
| 4 | Item No.4:-Filling in plinth and floors with contractors material/brought from outside and approved by Engineer incharge in layers of 15 cm to 20 cm including watering and compaction etc. complete. Addn.Spec.No. Bd.A.11 Page One Number 263 (SSR 22-23 It.No.21.37 ) |
| 5 | Item No.5:-Providing soling using 80 mm size trap metal in 15 cm. layer including filling voids with Crushed sand/grit, ramming, watering etc. complete. Addn.Spec.No.As directed by Engineer in charge. (SSR 22-23 It.No.21.40 ) |
| 6 | Item No.6:-Providing and laying Cast in situ/Ready Mix cement concrete in M-10 of trap/ granite/ quartzite/ gneiss metal for foundation and bedding including bailing out water, Steel centering, formwork, laying/pumping, compacting, roughening them if special finish is to be provided, finishing if required and curing complete, with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/concrete Batch mix plant (Pan mixer) etc. complete. With fine aggregate (Crushed sand VSI Grade) Addn. Spec.No.Bd. E. 1 Page One Number 287 (SSR 22-23 It.No.24.01 ) |
| 7 | Item No.7:-Providing and laying in situ /Ready Mix cement concrete M-20 of trap / granite /quartzite/ gneiss metal for R.C.C. work in foundations like raft, strip foundations, grillage and footings of R.C.C. columns and steel stanchions etc. including bailing out water, Steel centering formwork, laying/pumping cover blocks, compaction and curing roughening the surface if special finish is to be provided (Excluding reinforcement and structural steel) etc. complete, with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etc. complete. With fine aggregate (Crushed sand VSI Grade) Addn.Spec. No.Bd.F.3 Page One Number 298 and B.7, Page One Number38 (SSR 22-23 It.No.25.11) |
| 8 | Item No.8:-Providing and laying Cast in situ/Ready Mix cement concrete M-20 of trap / granite /quartzite/ gneiss metal for R.C.C. columns as per detailed designs and drawing or as directed including steel centering, formwork, cover blocks, laying/pumping, compaction finishing the formed surfaces with cement mortar 1:3 of sufficient minimum thickness to give a smooth and even surface or roughening if special finish is to be provided and curing etc. complete.(Excluding reinforcement and structural steel).with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etc. complete. With fine aggregate (Crushed sand VSI Grade) Addn.Spec. No.Bd.F.5 Page One Number 300 and B.7, Page.One Number 38 (SSR 22-23 It.No.25.31 ) |
| 9 | Item No.9:-Providing and laying Cast in situ/Ready Mix cement concrete M-20 of trap / granite/quartzite/ gneiss metal for R.C.C. beams and lintels as per detailed designs and drawings or as directed including steel centering, formwork, cover blocks, laying/pumping, compactionand roughening the surface if special finish is to be provided and curing etc. complete. (Excluding reinforcement and structural steel). with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etc. complete. With fine aggregate (Crushed sand VSI Grade) Addn.Spec.No. Bd.F.6 Page One Number 300 and B.7, Page One Number38 (SSR 22-23 It.No.25.50) |
| 10 | Item No.10:-Providing and laying Cast in situ/Ready Mix cement concrete M-20 of trap/ granite / quartzite/ gneiss metal for R.C.C. slabs and landings as per detailed designs and drawings including steel centering, formwork, cover blocks, laying/pumping, compaction finishing the formed surfaces with cement mortar 1:3 of sufficient minimum thickness to give a smooth and even surface or roughening if special finish is to be provided and curing etc. complete,(Excluding reinforcement and structural steel).with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etc. complete. With fine aggregate (Crushed sand VSI Grade) Addn.Spec.No.Bd.F.8 Page One Number 302 and B.7, Page One Number38 (SSR 22-23 It.No.25.70) |
| 11 | Item No.11:-Providing and fixing in position TMT - FE - 500 bar reinforcement of various diameters for R.C.C. pile caps, footings, foundations, slabs, beams columns, canopies, staircase, newels, chajjas, lintels pardis, copings, fins, arches etc. as per detailed designs, drawings and schedules. including cutting, bending, hooking the bars, binding with wires or tack welding and supporting as required complete. Addn.Spec. No.Bd.F.17, Page One Number 306 (SSR 22-23 It.No.26.33 ) |
| 12 | Item No.12:-Providing and fixing during laying in RCC Slab rectangular 2 mm thick M.S. sheet fan hook box of size 180x100 mm with required depth with holes or notches as required, bottom and top sides of 1.6 mm M.S. sheet fixed with 3.5 mm dia. round headed screws together with 12 mm dia. M.S. bar bent to shape with hooked ends for fan hook and painting to exposed surface Addn.Spec. No.As directed by Engineer in charge (SSR 22-23 It.No.26.68 ) |
| 13 | Item No.13:-Providing second class Burnt Brick masonry with conventional/ I.S. type bricks in cement mortar 1:6 in foundations and plinth of inner walls/ in plinth external walls including bailing out water manually , striking joints on unexposed faces, raking outjoints on exposed faces and watering etc. Complete. Additional Spec. No.Bd.G. 1 PageOne Number 313 (SSR 22-23 It.No.27.01 ) |
| 14 | Item No.14:-Providing second class Burnt Brick masonry with conventional/ I.S. type bricks in cement mortar 1:6 in superstructure including striking joints, raking out joints,watering and scaffolding etc. Complete Addn.Spec. No.Bd.G.5 Page One Number 315 (SSR 22-23 It.No.27.05 ) |
| 15 | Item No.15:-Providing internal cement plaster 6 mm thick in a single coat in cement mortar 1:4 without neeru finish to concrete surface in all positions including scaffolding and curing etc. complete. Addn.Spec.No. Bd.L.1 Page One Number 367 (SSR 22-23 It.No.32.01 ) |
| 16 | Item No.16:-Providing internal cement plaster 12mm thick in single coat in cement mortar 1:5 without neeru finish to concrete or brick surfaces, in al positions including scaffolding and curing etc. complete. Addn.Spec.No.Bd. L.2 Page One Number 368 (SSR 22-23 It.No.32.03 ) |
| 17 | Item No.17:-Providing internal cement plaster 20mm thick in Single coats in cement mortar 1:4 without neeru finish, to concrete, brick surface, in all positions including scaffolding and curing etc.complete. Addn.Spec.No.Bd.L.4 Page One Number 368 (SSR 22-23 It.No.32.07) |
| 18 | Item No.18:-Providing neeru finish to plastered surfaces in all positions including scaffolding and curing etc. complete. Addn.Spec.No.Bd. L.10, Page One Number370(SSR 22-23 It.No.32.15 ) |
| 19 | Item No.19:-Providing patti/ band 150mm wide on plastered surface 12 mm to 15 mm thick in C.M. 1:3 line and level including neat finishing scaffolding curing etc. complete. Addn.Spec. No.As directed by Engineer incharge. (SSR 22-23 It.No.32.25) |
| 20 | Item No.20:-Providing and laying vitrified mirror / glossy finish tiles decorative type having size 590 mm to 605 mm x 590 mm to 605 mm of 8 to 10 mm thickness and confirming to IS. 15622-2006 ( group Bla) of approved make, shade and pattern for flooring in required position laid on a bed of 1:4 cement mortar including neat cement float, filling joints, curing and clearing etc. complete. Addn.Spec.No.Bd.M. 12 Page One Number385 (SSR 22-23 It.No.33.40) |
| 21 | Item No.21:-Providing and laying vitrified mirror / glossy finish tiles having size 590 mm to 605 mm x 590 mm to 605 mm of 8 to 10 mm thickness and confirming to IS. 15622-2006 ( group Bla) of approved make, shade and pattern for dado and skirting in required position fixed in 1:4 cement mortar including neat cement float, filling joints, curing and clearing etc. complete Addn.Spec.No.Bd.M. 12 Page One Number385 (SSR 22-23 It.No.33.41 ) |
| 22 | Item No.22:-Providing and laying machine cut machine polished machine cut Kota stone slabs 20 to 25 mm thick for treads and risers of steps and staircases, with rounded nosing for the treads on a bed of 1:4 cement mortar including cement float, filling joints with neat cement slurry, curing, polishing and cleaning etc. complete. Addn.Spec. No.Bd.M.22 Page One Number 390 (SSR 22-23 It.No.33.18 ) |
| 23 | Item No.23:-Providing and fixing collapsible steel gate in one / two leaves with hot rolled vertical channels of 18 x 9 x 3 mm minimum size, crossings of M.S. flats of size 18 x 5 mm T or E section for runner of minimum 40 x 6 mm size for flange, M.S. flat for top runner of minimum size 40 x 12 mm with roller wheels confirming to grade F.G. 150 fitted with snap headed rivets of minimum size 6 mm max. spacing of vertical channels be 100 mm enclosed gate position and clear space of 150 mm between two sets of crossings with hold fasts, stoppers, spaces, handles, locking arrangement and one coat of red lead primer and oil painting etc. complete. (I.S. 105211983). Addn.Spec. No.BD-T-57 Page One Number 511 (SSR 22-23 It.No.39.26 ) |
| 24 | Item No.24:-Providing and fixing mild steel grill work for windows, ventilators, etc. 15 Kilogram/ One Square Metre as per drawing including fixtures necessary welding and painting with one coat of anticorrosive paint and two coats of oil painting complete. Addn.Spec. No.Bd.U.1 Page One Number 537 (SSR 22-23 It.No.40.02 ) |
| 25 | Item No.25:-Providing and applying priming coat on concrete/ masonary/ Asbestos Cement plastered surfaces including scaffolding if necessary, preparing the surface by thoroughly cleaning oil, grease, dirt and other foreign matter and sand papering as required etc. complete. Addn.Spec.No.As directed by Engineer in charge. (SSR 22-23 It.No.35.21 ) |
| 26 | Item No.26:-Providing and applying white-wash in two coats on old / new plastered or masonry surfaces and asbestos cement sheets including scaffolding and preparing the surface by brushing and brooming down etc. complete. Addn.Spec. No.Bd. P. I Page One Number 411 (SSR 22-23 It.No.36.03) |
| 27 | Item No.27:-Providing and applying washable oil-bound distemper of approved colour and shade to old and new surfaces in two coats including scaffolding, preparing the surfaces.(excluding the primer coat.) etc. complete. Addn.Spec.No.Bd.P.5 Page One Number 413 (SSR 22-23 It.No.36.11 ) |
| 28 | Item No.28:-Providing and applying two coats of water proof cement paint of approved manufacture and of approved colour to the plastered surfaces including scaffolding if necessary, cleaning and preparing the surface, watering for two days etc. complete. Addn.Spec. No.Bd.0.8 Page One Number 406 (SSR 22-23 It.No.35.13 ) |
| 29 | Item No.29:-Fixing in position Road Junction/ Informatory Sign Board in ground with C.C.1:4:8 block of 60cm x 60cm x 75cm size including all leads complete. Addn.Spec. No.MORTH 801 (SSR 22-23 It.No.6.20 ) |
| 30 | Item No.30:-Royalty charges for supply of Sand, Rubble, Murum, soil, 60mm./ 40mm metal (Hand broken) as per the Government of Maharashtra Revenue and Forest Department Gazette No. 146 Dt. 04 June 2021 States that the Royalty charges of Rs. 600/- per Brass (i.e. Rs. 211.95 /cum) are to be considered.The surcharge levied on Royalty shall also be payable to the contractor in following manner Royalty charges on all minor minerals do not form part of Rate Abstract and shall be reimbursed separately on production of proof to that effect. The Superinting Engineer, PWD may modify and circulate Royalty charges in case of any modifcations are made by Govt. of Maharashtra Royalty charges in case of any modifications are made by Govt. of Maharashtra Royalty charges against estimated quantity shall be included on Recapitulation sheet a) For sand= Royalty + Surcharge (2%) + Disst. Mineral Fondation cess (10%)=211.95+423+21.19=237.37 per cumb) For all Other Minerals= Royalty + Surcharge (2%) =211.95+4.23 = 216.18 cumOther Material |
| 31 | Item No.31: Laboratory testing charges for various material on the basis of testing frequency and charges fixed by Vigilance & Quality Control Circle for the current year For Specific tests like span load tests, plate/ pile load test etc. which are not included in the rate of item, the rates for these tests will be prepared on the basis of rates approved by M.E.R.I./any competent institute of Govt. of Maharashtra or Govt. of India.BRICKS : Water Absorption (Set of 5 Bricks), Compressive strength ( Set of 5 Bricks), Efflorescence ( Set of 5 Bricks) |
| 32 | Item No.32: Laboratory testing charges for various material on the basis of testing frequency and charges fixed by Vigilance & Quality Control Circle for the current year For Specific tests like span load tests, plate/ pile load test etc. which are not included in the rate of item, the rates for these tests will be prepared on the basis of rates approved by M.E.R.I./any competent institute of Govt. of Maharashtra or Govt. of India.CONCRETE: Compressive strength of C.C. Cube (Set of 3 cubes) Please Enable Macros to View BoQ information |
