|
| 1 | Earth work in excavation in foundation trenches or drains (not exceeding1.5m in width as 10sqm on plan) including dressing of sides and ramming of bottoms, lift up to 1.5m, including getting out the excavated soil and disposal of surplus excavated soil as directed. all kind of soil. |
| 2 | Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering, all work upto plinth level. 1:5:10 (1 cement: 5 coarse sand: 10 graded stone aggregate 40mm nominal size) C/C Line length of walls |
| 3 | Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering, all work upto plinth level 1:3:6 (1 cement: 3 coarse sand: 6 graded stone aggregate 20mm nominal size) |
| 4 | Half-Brick work in Super Structure in Cement mortar 1:4 (1cement: 4 sand) |
| 5 | Extra over brick masonry for super structure above plinth level. |
| 6 | Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering, all work upto plinth level. 1:1.5:3 (1 cement: 1.5 coarse sand: 3 graded stone aggregate 20mm nominal size) |
| 7 | Form work Centering and shuttering including strutting, propping etc and removal of form for: Suspended floors, roofs, landing, balconies and access platform. |
| 8 | Foundation and plinth |
| 9 | Reinforcement for R.C.C works including straightening, cutting, bending, placing in position and binding all complete. Thermo Mechanically Treated steel bars. (TMT)SAIL |
| 10 | 6 mm thick cement plaster in 1cement :3 Sand mortar |
| 11 | 12mm thick cement plaster in 1cement :6 Sand mortar |
| 12 | 15mm thick cement plaster in 1cement :6 Sand mortar |
| 13 | Providing and laying in position 50 mm thick C.Concrete Flooring in 1:2:4 mix |
| 14 | Distempering with oil bound washable distemper of approved brand and manufacture to give an even shade on New work (two or more coats) over and including priming coat with water thinnable cement primer |
| 15 | Making plinth protection 50mm thick of cement concrete 1:3:6(1cement:3coarse sand:6graded stone agg 20mm nominal size)over 75mm thick bed of dry brick ballast 40mm nominal size well rammed and consolidated and grouted with fine sand including finishing the top smooth. |
| 16 | Providing and fixing of 100 mm CP grating |
| 17 | Providing and fixing G.I. pipes complete with G.I. fittings and clamps, including cutting and making good the walls etc.Concealed pipe including painting with anti corrosive bitumastic paint, cutting chases and making good the wall 15 mm dia. nominal bore |
| 18 | Providing and fixing CP brass Angle Valve for basin/wall mixer, gysers etc |
| 19 | Providing and fixing ball valve (brass) of approved quality, High or low pressure, with plastic floats complete 15 mm nominal bore |
| 20 | Providing and fixing G.I. Union in G.I. pipe including cutting and threading the pipe and making long screws etc. complete (new work) |
| 21 | Brickwork in superstructure in 1:4 mix |
| 22 | Carriage of materials from source to site of work through MT/HL Including loading unloading complete job. Sand an avg. distance of 15km by M.T |
| 23 | Carriage of materials from source to site of work through MT/HL Including loading unloading complete job. Sand an avg. distance of 15km by M.T |
| 24 | Steel work welded in built up sections/framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required. In gratings, frames, guard bar, ladder, railings, brackets, gates and similar works. |
| 25 | Motor along with pump Assembly |
| 26 | Repair of Motor/ Pump 0.5 HP |
| 27 | Repair of Motor/ Pump 1.0 HP Please Enable Macros to View BoQ information |
