|
| 1 | Providing and fixing 12mm thick plain framed wood panellig B5:I32ng on wall necessary screws including inner side 12mm board with 0.5mm fiber sheet ,polishing ,priming coat on unexposed surface etc. complete. with. |
| 2 | Wiring for circuit/sub-main with following size PVC insulated heat resistant flame retardant (HRFR) and low smoke single core (flexible) copper conductor cable in surface/recessed PVC conduit along with 1 No. HRFRLS/PVC insulated single core copper conductor cable of same size for earthing as required. 2.(a) 2x2.5 Sq. mm. |
| 3 | 2.(b) 2x4.0 Sq. mm. |
| 4 | 2.(c) 2*1.5sq.mm |
| 5 | 2. (d) 1*1.0 sq mm |
| 6 | Light point/ fan point/exhaust fan point/cell bell point & tube point with 1.5 sq mm. PVC insulated heat resistant flame retardant (HRFR) and low smoke single fore (flexible) cooper conductor cable in surface/ recess PVC conduct and earthing the light point with 1.5 sq mm HRFRLS/PVC instituted single core copper conductor as required, group c as per approved drawing design and as directed by the engineer incharge. etc. 6.a Exhast fan including all fitting material complete |
| 7 | 6. b Celling fan including all fitting material complete |
| 8 | 6. c S.P. 5/ 6 Amps one way Modular switch |
| 9 | 6.d 6 pin,15/16 Amps Modular socket outlet pawer |
| 10 | 6.e 5 pin, 5/ 6 Amps Modular socket outlet. |
| 11 | 6.f MCB Box with kit kat with fitting complete |
| 12 | Providing and fixing celling light light 18 watt including fitting and labour complete |
| 13 | Providing and fixing tube light 10v including fitting and labour complete |
| 14 | Demolishing brick work manually/ by mechanical meansincluding stacking of serviceable material and disposalof unserviceable material within 50 metres lead as perdirection of Engineer-in-charge.In cement mortar |
| 15 | Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing / paneling, C.P. brass / stainless steel screws, all complete as per architectural drawings and the directions of Engineer-incharge. (Glazing, paneling and dash fasteners to be paid for separately) : 14.( a) For fixed portion Polyester powder coated aluminium (minimum thickness of polyester powder coating 50 micron) |
| 16 | 14.b For shutters of doors, windows & ventilators including providing and fixing hinges/ pivots and making provision for fixing of fittings wherever required including the cost of EPDM rubber / neoprene gasket required (Fittings shall be paid for separately) |
| 17 | Providing and fixing 12 mm thick prelaminated particle board flat pressed three layer or graded wood particle board conforming to IS: 12823 Grade l Type ll, in panelling fixed in aluminum doors, windows shutters and partition frames with C.P. brass / stainless steel screws etc. complete as per architectural drawings and directions of engineer- in-chargePre-laminated particle board with decorative lamination on one side and balancing lamination on other side. |
| 18 | Providing and fixing glazing With float glass panes of 5 mm thickness (weight not less than 12.50 kg/ sqm) in aluminium door, window, ventilator shutters and partitions etc. with EPDM rubber / neoprene gasket etc. complete as per the architectural drawings and the directions of engineer-in-charge . (Cost of aluminium snap beading shall be paid in basic item): Please Enable Macros to View BoQ information |
