|
| 1 | Providing and fixingWhite glazed tiles 6mm thick (Kajaria) in flooring, treads of stteps and dado 12 mm thick cement mortar 1:3(1 cement: 3sand)finished with finish pointing in white cement within all leads and lifts. |
| 2 | Providing and fixingWhite glazed tiles 6mm thick (Kajaria) in skirting riser of steps and dado 12 mm thick cement mortar 1:3(1 cement: 3sand)finished with finish pointing in white cement within all leads and lifts. |
| 3 | Providing and fixing Board Wood 18mm thick complte in all lead & Lift. |
| 4 | Providing and fixing Sunmica Sheet 1mm thick complte in all lead & Lift. |
| 5 | Providing and fixing Aluminium Handles of Paragon/Flora Make with Screw etc complte including carriage of materialsin all lead & Lift. |
| 6 | Providing and fixing Aluminium Tower boalt (Barrel Type) anodized transparent or dyed to reqired shade with screw etc all lead & Lift. |
| 7 | Providing and fixing anodized aluminium sliding door bolt anodized colour and shade with bolts and nuts screws etc. complete. 250x16mm. |
| 8 | Providing and fixing panneled glazed or panelled and glazed shutters for doors, windows and clerestory windows,including black enamelled iron butt hinges with necessary screws. 40 mm thick. 1st class deodar wood. |
| 9 | Applying Birla White wall care putty over plaster surface after thoroughly brushing the surface free from mortar drops, dust, loose material and other foreign matters sand papered smooth to give final matter finishing to th;e surface complete within all leads and lifts. |
| 10 | Wall painting (two coats) with plastic emulsion paint of approved brand and manufacture on undecorated wall surfaces to give an even shade including thoroughly brushing the surface free from mortar droppings and other foreign matter and sand papered smooth including applying of putty as required for making the surface. |
| 11 | Painting two coat with ready mixed paint other then white (excluding priming coat) on previously painted steel and other metal surfaces with enamel paint brushing to give an even shade including cleaning the surface of all dirt, dust and other foreign matter in all respect. shades |
| 12 | Steel work welded in built up sections,trusses and framed work, including cutting ,hoisting ,fixing in position and applying a priming coat of red lead paint:- In beams ,joints, channels angle cleats as in main and cross beams , lip and jack, rafters, pillers connected to common rafters and the like, angle iron gate etc. within all leads and lifts. |
| 13 | Stone Boulder filling under floors/behind retaining wall complete within all leads and lifts. |
| 14 | Providing and laying cement concrete 1:3:6(1 cement: 3sand: 6graded stone agg. 20mm nominal size)and curing complete excluding cost of form work in foundation and plinth within all leads and lifts. |
| 15 | Providing and fixing 25 Ltr Gyeaser including all fittings complete in all lead & Lift. |
| 16 | Providing and fixing 5 Ltr Gyeaser including all fittings complete in all lead & Lift. |
| 17 | Providing and fixing 5 Amp. Socket point including all fittings complete in all lead & Lift. |
| 18 | Providing and fixing 16 Amp. Socket point including all fittings complete in all lead & Lift. |
| 19 | Providing and fixing 20 Amp. MCB point including all fittings complete in all lead & Lift. |
| 20 | Providing and fixing 64 Amp. MCB point including all fittings complete in all lead & Lift. |
| 21 | Providing and fixing G.I. pipes complete with G.I. fittings and clamps, i/c cutting and making good the walls etc. 15mm nominal bore complete in all lead & Lift. |
| 22 | Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer in ChargeConcealed work, including cutting chases and complete in all lead & Lift. |
| 23 | 25mm nominal bore |
| 24 | 25mm nominal bore |
| 25 | Providing and fixing white vitreous china pedestal type water closet (European type W.C. pan) with seat and lid, 10 litre low level white P.V.C. flushing cistern, including flush pipe, with manually controlled device (handle lever), conforming to IS: 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required W.C. pan with ISI marked white solid plastic seat and lid |
| 26 | Providing and fixing 8 mm dia C.P. / S.S. Jet with flexible tube upto 1 metre long with S.S. triangular plate to Eureopean type W.C. of quality and make as approved by Engineer - in -charge complete in all lead & Lift. |
| 27 | Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever require White Vitreous China Wash basin size 550x400 mm with a pair of 15 mm C.P. brass pillar taps complete in all lead & Lift. |
| 28 | Providing and fixing white vitreous china pedestal for wash basin completely recessed at the back for the reception of pipes and fittings. complete in all lead & Lift. |
| 29 | Providing and fixing white vitreous china flat back or wall corner type lipped front urinal basin of 430x260x350 mm and 340x410x265 mm sizes respectively with automatic flushing cistern with standard flush pipe and C.P. brass spreaders with brass unions and G.1 clamps complete, including painting of fittings and brackets, cutting and making good the walls and floors wherever required One urinal basin with 5 litre white P.V.C automatic Nushing cistern complete in all lead & Lift. |
| 30 | Providing and fixing Stainless Steel Kitchen sink with drain board A ISI 304 (18/8) kitchen sink as per 15:17983 with CL brackets and stainless steel plug 40 mm, including painting of fittings and brackets, cutting and making good the walls wherever required Kitchen sink with drain board 510x1040 mm bowl depth 225. complete in all lead & Lift. |
| 31 | Providing and fixing 40 mm dia flexible P.V.C. waste pipe for sink or wash basin including PVC. waste fittings complete in all lead & Lift. |
| 32 | Providing and fixing 600x450 mm beveled edge mirror of superior glass (of approved quality) complete with 6 num thick hard board ground fixed to wooden cleats with C.P. brass screws and washers complete complete in all lead & Lift. |
| 33 | Providing and fixing CP soap Dish Holder having length of 138mm, breadth 102mm, height of 75mm with concealed fitting arrangements, weighing not less than 106 gms. complete in all lead & Lift. |
| 34 | Providing and fixing trap of self cleansing design with screwed down or hinged grating with or without vent arm complete, including cost of cutting and making good the walls and floors 100 mm inlet and 100 mm outlet Sand cast iron S&S as per 15: 3989. complete in all lead & Lift. |
| 35 | Providing and fixing PTMT towel ring trapezoidal shape 215 mm long. 200 mm wide with minimum distances of 37 mm from wall face with concealed fittings arrangement of approved quality and colour, weighing not less than 88 gms. complete in all lead & Lift. |
| 36 | Providing and fixing PTMT liquid soap container 109 mm wide, 125 mun high and 112 mm distance from wall of standard shape with bracket of the same materials with snap fittings of approved quality and colour, weighing not less than 105 gms complete in all lead & Lift. |
| 37 | Providing and fixing 15 mum nominal bore with 45 cm length unplasticised P.V.C. connection pipe with PTMT Nuts, collar and bush of approved quality and colourcomplete in all lead & Lift. |
| 38 | Providing and fixing 15 mm nominal bore CP. brass bib cock of approved quality conforming to IS:8931 complete in all lead & Lift. |
| 39 | Providing and fixing C.P. brass long nose bib cock of approved quality conforming to IS standards and weighing not less than 810 gms complete in all lead & Lift. |
| 40 | Providing and fixing 15 mm nominal CP. brass stop cock (concealed) of standard design and of approved make conforming to IS:8931. complete in all lead & Lift. |
| 41 | Providing and fixing 15 mm nominal C.P. brass angle valve for basin mixer and geyser points of approved quality conforming to IS:8931 complete in all lead & Lift. |
| 42 | Providing and fixing C.P. Brass extension nipple (size 15mmx50mm) of approved make and quality as per direction of Engineer-in-charge. complete in all lead & Lift. |
| 43 | Providing and fixing high pressure PVC spigot and socket soil, waste and ventilating pipes ISI Marked i/c fixing with approved adhesive etc. complete in all lead & Lift. |
| 44 | 110mm dia |
| 45 | 75mm dia |
| 46 | Providing and fixing Coupler unplasticised Rigid PVC pipes complete in all lead & Lift. |
| 47 | 110mm dia |
| 48 | 75mm dia |
| 49 | Providing and fixing Single tee with door of unplasticised - PVC moulded for unplasticised Rigid PVCr pipes as per direction of Engineer-in-charge. complete in all lead & Lift. |
| 50 | 110x110x110mm |
| 51 | 75x75x75 |
| 52 | Providing and fixing Bend of unplasticised PVC for unplasticised Rigid PVCr pipes complete in all lead & Lift. |
| 53 | 110mm dia |
| 54 | 75mm dia |
| 55 | Providing and placing on terrace (at all floor levels) polyethylene water storage tank, IS: 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank. |
| 56 | Providing and laying cement concrete 1:5:10 (1 cement: 5 coarse sand: 10 graded stone aggregate 40 mm nominal size) all-round S. W. pipes including bed concrete as per standard design 100 mm diameter S.W. pipe |
| 57 | Constructing masonry Chamber 60x45x50 cm inside, in brick work in cement mortar 1:4 (1 cement: 4 coarse sand) for water meter complete with C.I. double flap surface box 400x200x200 mm (inside) with locking arrangement and RCC top slab 1:2:4 mix (1 cement:coarse sand: 4 graded stone aggregate 20 mm nominal size), i/c necessary excavation, foundation concrete 1:5:10 (1 cement: 5 fine sand: 10 graded stone aggregate 40 mm nominal size) and inside plastering with cement mortar 1:3 (1 cement: 3 coarse sand) 12 mm thick, finished with a floating coat of neat cement complete as per standard design With common burnt clay F.P.S.(non modular) bricks of class designation 7.5 |
| 58 | Constructing brick masonry chamber for underground C.I. inspection chamber and bends with bricks in cement mortar 1:4 (1 cement: 4 coarse sand) C.L. cover with frame (light duty) 455x610 mm internal dimensions, total weight of cover with frame to be not less than 38 kg (weight of cover 23 kg and weight of frame 15 kg), R.C.C. top slab with 1:1.5:3 mix (1 cement 1.5 Fine sand: 3 graded stone aggregate 20 mm nominal size), foundation concrete 1:5:10 (1) cement: 5 fine sand: 10 graded stone aggregate 40 mm nominal size), inside plastering 12 mm thick with cement mortar 1:3 (1 cement: 3 coarse sand), finished smooth with a floating coat of neat cement on walls and bed concrete etc. complete as per standard design Inside dimensions 455x610 mm and 45 cm deep for single pipe line With common burnt clay F.P.S. (non modular) bricks of class designation 7.5 |
| 59 | Structural steel work riveted, bolted or welded in built up sections, trusses and framed work, including cutting. hoisting, fixing in position and applying a priming coat of approved steel primer all complete. |
| 60 | Providing and fixing prepainted steel sheet Jindal/Shakti or equivalant in roofing over steel trusses hot dip metalic zinc coated sheet with top coat of regular modified polyster (RMP) organic coating of 20 (TWENTY) microns over 5 (five) microns of primer back coat of polyster and 5 (five) microns coating fixed with J or L. hooks bolts and nuts 8mm (eight millimeter) dia bitumen and Gl limpet washer filled with required colour and laid completed. 0.60mm sheet Please Enable Macros to View BoQ information |
